/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2007-2009 Emulex. All rights reserved. *
+ * Copyright (C) 2007-2011 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
* # mount -t debugfs none /sys/kernel/debug
*
* The lpfc debugfs directory hierarchy is:
- * lpfc/lpfcX/vportY
- * where X is the lpfc hba unique_id
+ * /sys/kernel/debug/lpfc/fnX/vportY
+ * where X is the lpfc hba function unique_id
* where Y is the vport VPI on that hba
*
* Debugging services available per vport:
#include <linux/debugfs.h>
-/* size of output line, for discovery_trace and slow_ring_trace */
-#define LPFC_DEBUG_TRC_ENTRY_SIZE 100
-
-/* nodelist output buffer size */
-#define LPFC_NODELIST_SIZE 8192
-#define LPFC_NODELIST_ENTRY_SIZE 120
-
-/* dumpHBASlim output buffer size */
-#define LPFC_DUMPHBASLIM_SIZE 4096
-
-/* dumpHostSlim output buffer size */
-#define LPFC_DUMPHOSTSLIM_SIZE 4096
-
-/* hbqinfo output buffer size */
-#define LPFC_HBQINFO_SIZE 8192
-
-struct lpfc_debug {
- char *buffer;
- int len;
-};
-
static atomic_t lpfc_debugfs_seq_trc_cnt = ATOMIC_INIT(0);
static unsigned long lpfc_debugfs_start_time = 0L;
+/* iDiag */
+static struct lpfc_idiag idiag;
+
/**
* lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer
* @vport: The vport to gather the log info from.
return nbytes;
}
-
-
/**
* lpfc_debugfs_nodelist_open - Open the nodelist debugfs file
* @inode: The inode pointer that contains a vport pointer.
size_t nbytes, loff_t *ppos)
{
struct lpfc_debug *debug = file->private_data;
+
return simple_read_from_buffer(buf, nbytes, ppos, debug->buffer,
debug->len);
}
return 0;
}
+/*
+ * iDiag debugfs file access methods
+ */
+
+/*
+ * iDiag PCI config space register access methods:
+ *
+ * The PCI config space register accessees of read, write, read-modify-write
+ * for set bits, and read-modify-write for clear bits to SLI4 PCI functions
+ * are provided. In the proper SLI4 PCI function's debugfs iDiag directory,
+ *
+ * /sys/kernel/debug/lpfc/fn<#>/iDiag
+ *
+ * the access is through the debugfs entry pciCfg:
+ *
+ * 1. For PCI config space register read access, there are two read methods:
+ * A) read a single PCI config space register in the size of a byte
+ * (8 bits), a word (16 bits), or a dword (32 bits); or B) browse through
+ * the 4K extended PCI config space.
+ *
+ * A) Read a single PCI config space register consists of two steps:
+ *
+ * Step-1: Set up PCI config space register read command, the command
+ * syntax is,
+ *
+ * echo 1 <where> <count> > pciCfg
+ *
+ * where, 1 is the iDiag command for PCI config space read, <where> is the
+ * offset from the beginning of the device's PCI config space to read from,
+ * and <count> is the size of PCI config space register data to read back,
+ * it will be 1 for reading a byte (8 bits), 2 for reading a word (16 bits
+ * or 2 bytes), or 4 for reading a dword (32 bits or 4 bytes).
+ *
+ * Setp-2: Perform the debugfs read operation to execute the idiag command
+ * set up in Step-1,
+ *
+ * cat pciCfg
+ *
+ * Examples:
+ * To read PCI device's vendor-id and device-id from PCI config space,
+ *
+ * echo 1 0 4 > pciCfg
+ * cat pciCfg
+ *
+ * To read PCI device's currnt command from config space,
+ *
+ * echo 1 4 2 > pciCfg
+ * cat pciCfg
+ *
+ * B) Browse through the entire 4K extended PCI config space also consists
+ * of two steps:
+ *
+ * Step-1: Set up PCI config space register browsing command, the command
+ * syntax is,
+ *
+ * echo 1 0 4096 > pciCfg
+ *
+ * where, 1 is the iDiag command for PCI config space read, 0 must be used
+ * as the offset for PCI config space register browse, and 4096 must be
+ * used as the count for PCI config space register browse.
+ *
+ * Step-2: Repeately issue the debugfs read operation to browse through
+ * the entire PCI config space registers:
+ *
+ * cat pciCfg
+ * cat pciCfg
+ * cat pciCfg
+ * ...
+ *
+ * When browsing to the end of the 4K PCI config space, the browse method
+ * shall wrap around to start reading from beginning again, and again...
+ *
+ * 2. For PCI config space register write access, it supports a single PCI
+ * config space register write in the size of a byte (8 bits), a word
+ * (16 bits), or a dword (32 bits). The command syntax is,
+ *
+ * echo 2 <where> <count> <value> > pciCfg
+ *
+ * where, 2 is the iDiag command for PCI config space write, <where> is
+ * the offset from the beginning of the device's PCI config space to write
+ * into, <count> is the size of data to write into the PCI config space,
+ * it will be 1 for writing a byte (8 bits), 2 for writing a word (16 bits
+ * or 2 bytes), or 4 for writing a dword (32 bits or 4 bytes), and <value>
+ * is the data to be written into the PCI config space register at the
+ * offset.
+ *
+ * Examples:
+ * To disable PCI device's interrupt assertion,
+ *
+ * 1) Read in device's PCI config space register command field <cmd>:
+ *
+ * echo 1 4 2 > pciCfg
+ * cat pciCfg
+ *
+ * 2) Set bit 10 (Interrupt Disable bit) in the <cmd>:
+ *
+ * <cmd> = <cmd> | (1 < 10)
+ *
+ * 3) Write the modified command back:
+ *
+ * echo 2 4 2 <cmd> > pciCfg
+ *
+ * 3. For PCI config space register set bits access, it supports a single PCI
+ * config space register set bits in the size of a byte (8 bits), a word
+ * (16 bits), or a dword (32 bits). The command syntax is,
+ *
+ * echo 3 <where> <count> <bitmask> > pciCfg
+ *
+ * where, 3 is the iDiag command for PCI config space set bits, <where> is
+ * the offset from the beginning of the device's PCI config space to set
+ * bits into, <count> is the size of the bitmask to set into the PCI config
+ * space, it will be 1 for setting a byte (8 bits), 2 for setting a word
+ * (16 bits or 2 bytes), or 4 for setting a dword (32 bits or 4 bytes), and
+ * <bitmask> is the bitmask, indicating the bits to be set into the PCI
+ * config space register at the offset. The logic performed to the content
+ * of the PCI config space register, regval, is,
+ *
+ * regval |= <bitmask>
+ *
+ * 4. For PCI config space register clear bits access, it supports a single
+ * PCI config space register clear bits in the size of a byte (8 bits),
+ * a word (16 bits), or a dword (32 bits). The command syntax is,
+ *
+ * echo 4 <where> <count> <bitmask> > pciCfg
+ *
+ * where, 4 is the iDiag command for PCI config space clear bits, <where>
+ * is the offset from the beginning of the device's PCI config space to
+ * clear bits from, <count> is the size of the bitmask to set into the PCI
+ * config space, it will be 1 for setting a byte (8 bits), 2 for setting
+ * a word(16 bits or 2 bytes), or 4 for setting a dword (32 bits or 4
+ * bytes), and <bitmask> is the bitmask, indicating the bits to be cleared
+ * from the PCI config space register at the offset. the logic performed
+ * to the content of the PCI config space register, regval, is,
+ *
+ * regval &= ~<bitmask>
+ *
+ * Note, for all single register read, write, set bits, or clear bits access,
+ * the offset (<where>) must be aligned with the size of the data:
+ *
+ * For data size of byte (8 bits), the offset must be aligned to the byte
+ * boundary; for data size of word (16 bits), the offset must be aligned
+ * to the word boundary; while for data size of dword (32 bits), the offset
+ * must be aligned to the dword boundary. Otherwise, the interface will
+ * return the error:
+ *
+ * "-bash: echo: write error: Invalid argument".
+ *
+ * For example:
+ *
+ * echo 1 2 4 > pciCfg
+ * -bash: echo: write error: Invalid argument
+ *
+ * Note also, all of the numbers in the command fields for all read, write,
+ * set bits, and clear bits PCI config space register command fields can be
+ * either decimal or hex.
+ *
+ * For example,
+ * echo 1 0 4096 > pciCfg
+ *
+ * will be the same as
+ * echo 1 0 0x1000 > pciCfg
+ *
+ * And,
+ * echo 2 155 1 10 > pciCfg
+ *
+ * will be
+ * echo 2 0x9b 1 0xa > pciCfg
+ */
+
+/**
+ * lpfc_idiag_cmd_get - Get and parse idiag debugfs comands from user space
+ * @buf: The pointer to the user space buffer.
+ * @nbytes: The number of bytes in the user space buffer.
+ * @idiag_cmd: pointer to the idiag command struct.
+ *
+ * This routine reads data from debugfs user space buffer and parses the
+ * buffer for getting the idiag command and arguments. The while space in
+ * between the set of data is used as the parsing separator.
+ *
+ * This routine returns 0 when successful, it returns proper error code
+ * back to the user space in error conditions.
+ */
+static int lpfc_idiag_cmd_get(const char __user *buf, size_t nbytes,
+ struct lpfc_idiag_cmd *idiag_cmd)
+{
+ char mybuf[64];
+ char *pbuf, *step_str;
+ int bsize, i;
+
+ /* Protect copy from user */
+ if (!access_ok(VERIFY_READ, buf, nbytes))
+ return -EFAULT;
+
+ memset(mybuf, 0, sizeof(mybuf));
+ memset(idiag_cmd, 0, sizeof(*idiag_cmd));
+ bsize = min(nbytes, (sizeof(mybuf)-1));
+
+ if (copy_from_user(mybuf, buf, bsize))
+ return -EFAULT;
+ pbuf = &mybuf[0];
+ step_str = strsep(&pbuf, "\t ");
+
+ /* The opcode must present */
+ if (!step_str)
+ return -EINVAL;
+
+ idiag_cmd->opcode = simple_strtol(step_str, NULL, 0);
+ if (idiag_cmd->opcode == 0)
+ return -EINVAL;
+
+ for (i = 0; i < LPFC_IDIAG_CMD_DATA_SIZE; i++) {
+ step_str = strsep(&pbuf, "\t ");
+ if (!step_str)
+ return 0;
+ idiag_cmd->data[i] = simple_strtol(step_str, NULL, 0);
+ }
+ return 0;
+}
+
+/**
+ * lpfc_idiag_open - idiag open debugfs
+ * @inode: The inode pointer that contains a pointer to phba.
+ * @file: The file pointer to attach the file operation.
+ *
+ * Description:
+ * This routine is the entry point for the debugfs open file operation. It
+ * gets the reference to phba from the i_private field in @inode, it then
+ * allocates buffer for the file operation, performs the necessary PCI config
+ * space read into the allocated buffer according to the idiag user command
+ * setup, and then returns a pointer to buffer in the private_data field in
+ * @file.
+ *
+ * Returns:
+ * This function returns zero if successful. On error it will return an
+ * negative error value.
+ **/
+static int
+lpfc_idiag_open(struct inode *inode, struct file *file)
+{
+ struct lpfc_debug *debug;
+
+ debug = kmalloc(sizeof(*debug), GFP_KERNEL);
+ if (!debug)
+ return -ENOMEM;
+
+ debug->i_private = inode->i_private;
+ debug->buffer = NULL;
+ file->private_data = debug;
+
+ return 0;
+}
+
+/**
+ * lpfc_idiag_release - Release idiag access file operation
+ * @inode: The inode pointer that contains a vport pointer. (unused)
+ * @file: The file pointer that contains the buffer to release.
+ *
+ * Description:
+ * This routine is the generic release routine for the idiag access file
+ * operation, it frees the buffer that was allocated when the debugfs file
+ * was opened.
+ *
+ * Returns:
+ * This function returns zero.
+ **/
+static int
+lpfc_idiag_release(struct inode *inode, struct file *file)
+{
+ struct lpfc_debug *debug = file->private_data;
+
+ /* Free the buffers to the file operation */
+ kfree(debug->buffer);
+ kfree(debug);
+
+ return 0;
+}
+
+/**
+ * lpfc_idiag_cmd_release - Release idiag cmd access file operation
+ * @inode: The inode pointer that contains a vport pointer. (unused)
+ * @file: The file pointer that contains the buffer to release.
+ *
+ * Description:
+ * This routine frees the buffer that was allocated when the debugfs file
+ * was opened. It also reset the fields in the idiag command struct in the
+ * case the command is not continuous browsing of the data structure.
+ *
+ * Returns:
+ * This function returns zero.
+ **/
+static int
+lpfc_idiag_cmd_release(struct inode *inode, struct file *file)
+{
+ struct lpfc_debug *debug = file->private_data;
+
+ /* Read PCI config register, if not read all, clear command fields */
+ if ((debug->op == LPFC_IDIAG_OP_RD) &&
+ (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_RD))
+ if ((idiag.cmd.data[1] == sizeof(uint8_t)) ||
+ (idiag.cmd.data[1] == sizeof(uint16_t)) ||
+ (idiag.cmd.data[1] == sizeof(uint32_t)))
+ memset(&idiag, 0, sizeof(idiag));
+
+ /* Write PCI config register, clear command fields */
+ if ((debug->op == LPFC_IDIAG_OP_WR) &&
+ (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR))
+ memset(&idiag, 0, sizeof(idiag));
+
+ /* Free the buffers to the file operation */
+ kfree(debug->buffer);
+ kfree(debug);
+
+ return 0;
+}
+
+/**
+ * lpfc_idiag_pcicfg_read - idiag debugfs read pcicfg
+ * @file: The file pointer to read from.
+ * @buf: The buffer to copy the data to.
+ * @nbytes: The number of bytes to read.
+ * @ppos: The position in the file to start reading from.
+ *
+ * Description:
+ * This routine reads data from the @phba pci config space according to the
+ * idiag command, and copies to user @buf. Depending on the PCI config space
+ * read command setup, it does either a single register read of a byte
+ * (8 bits), a word (16 bits), or a dword (32 bits) or browsing through all
+ * registers from the 4K extended PCI config space.
+ *
+ * Returns:
+ * This function returns the amount of data that was read (this could be less
+ * than @nbytes if the end of the file was reached) or a negative error value.
+ **/
+static ssize_t
+lpfc_idiag_pcicfg_read(struct file *file, char __user *buf, size_t nbytes,
+ loff_t *ppos)
+{
+ struct lpfc_debug *debug = file->private_data;
+ struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
+ int offset_label, offset, len = 0, index = LPFC_PCI_CFG_RD_SIZE;
+ int where, count;
+ char *pbuffer;
+ struct pci_dev *pdev;
+ uint32_t u32val;
+ uint16_t u16val;
+ uint8_t u8val;
+
+ pdev = phba->pcidev;
+ if (!pdev)
+ return 0;
+
+ /* This is a user read operation */
+ debug->op = LPFC_IDIAG_OP_RD;
+
+ if (!debug->buffer)
+ debug->buffer = kmalloc(LPFC_PCI_CFG_SIZE, GFP_KERNEL);
+ if (!debug->buffer)
+ return 0;
+ pbuffer = debug->buffer;
+
+ if (*ppos)
+ return 0;
+
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_RD) {
+ where = idiag.cmd.data[0];
+ count = idiag.cmd.data[1];
+ } else
+ return 0;
+
+ /* Read single PCI config space register */
+ switch (count) {
+ case SIZE_U8: /* byte (8 bits) */
+ pci_read_config_byte(pdev, where, &u8val);
+ len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len,
+ "%03x: %02x\n", where, u8val);
+ break;
+ case SIZE_U16: /* word (16 bits) */
+ pci_read_config_word(pdev, where, &u16val);
+ len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len,
+ "%03x: %04x\n", where, u16val);
+ break;
+ case SIZE_U32: /* double word (32 bits) */
+ pci_read_config_dword(pdev, where, &u32val);
+ len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len,
+ "%03x: %08x\n", where, u32val);
+ break;
+ case LPFC_PCI_CFG_SIZE: /* browse all */
+ goto pcicfg_browse;
+ break;
+ default:
+ /* illegal count */
+ len = 0;
+ break;
+ }
+ return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
+
+pcicfg_browse:
+
+ /* Browse all PCI config space registers */
+ offset_label = idiag.offset.last_rd;
+ offset = offset_label;
+
+ /* Read PCI config space */
+ len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len,
+ "%03x: ", offset_label);
+ while (index > 0) {
+ pci_read_config_dword(pdev, offset, &u32val);
+ len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len,
+ "%08x ", u32val);
+ offset += sizeof(uint32_t);
+ index -= sizeof(uint32_t);
+ if (!index)
+ len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len,
+ "\n");
+ else if (!(index % (8 * sizeof(uint32_t)))) {
+ offset_label += (8 * sizeof(uint32_t));
+ len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len,
+ "\n%03x: ", offset_label);
+ }
+ }
+
+ /* Set up the offset for next portion of pci cfg read */
+ idiag.offset.last_rd += LPFC_PCI_CFG_RD_SIZE;
+ if (idiag.offset.last_rd >= LPFC_PCI_CFG_SIZE)
+ idiag.offset.last_rd = 0;
+
+ return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
+}
+
+/**
+ * lpfc_idiag_pcicfg_write - Syntax check and set up idiag pcicfg commands
+ * @file: The file pointer to read from.
+ * @buf: The buffer to copy the user data from.
+ * @nbytes: The number of bytes to get.
+ * @ppos: The position in the file to start reading from.
+ *
+ * This routine get the debugfs idiag command struct from user space and
+ * then perform the syntax check for PCI config space read or write command
+ * accordingly. In the case of PCI config space read command, it sets up
+ * the command in the idiag command struct for the debugfs read operation.
+ * In the case of PCI config space write operation, it executes the write
+ * operation into the PCI config space accordingly.
+ *
+ * It returns the @nbytges passing in from debugfs user space when successful.
+ * In case of error conditions, it returns proper error code back to the user
+ * space.
+ */
+static ssize_t
+lpfc_idiag_pcicfg_write(struct file *file, const char __user *buf,
+ size_t nbytes, loff_t *ppos)
+{
+ struct lpfc_debug *debug = file->private_data;
+ struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
+ uint32_t where, value, count;
+ uint32_t u32val;
+ uint16_t u16val;
+ uint8_t u8val;
+ struct pci_dev *pdev;
+ int rc;
+
+ pdev = phba->pcidev;
+ if (!pdev)
+ return -EFAULT;
+
+ /* This is a user write operation */
+ debug->op = LPFC_IDIAG_OP_WR;
+
+ rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd);
+ if (rc)
+ return rc;
+
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_RD) {
+ /* Read command from PCI config space, set up command fields */
+ where = idiag.cmd.data[0];
+ count = idiag.cmd.data[1];
+ if (count == LPFC_PCI_CFG_SIZE) {
+ if (where != 0)
+ goto error_out;
+ } else if ((count != sizeof(uint8_t)) &&
+ (count != sizeof(uint16_t)) &&
+ (count != sizeof(uint32_t)))
+ goto error_out;
+ if (count == sizeof(uint8_t)) {
+ if (where > LPFC_PCI_CFG_SIZE - sizeof(uint8_t))
+ goto error_out;
+ if (where % sizeof(uint8_t))
+ goto error_out;
+ }
+ if (count == sizeof(uint16_t)) {
+ if (where > LPFC_PCI_CFG_SIZE - sizeof(uint16_t))
+ goto error_out;
+ if (where % sizeof(uint16_t))
+ goto error_out;
+ }
+ if (count == sizeof(uint32_t)) {
+ if (where > LPFC_PCI_CFG_SIZE - sizeof(uint32_t))
+ goto error_out;
+ if (where % sizeof(uint32_t))
+ goto error_out;
+ }
+ } else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR ||
+ idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST ||
+ idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) {
+ /* Write command to PCI config space, read-modify-write */
+ where = idiag.cmd.data[0];
+ count = idiag.cmd.data[1];
+ value = idiag.cmd.data[2];
+ /* Sanity checks */
+ if ((count != sizeof(uint8_t)) &&
+ (count != sizeof(uint16_t)) &&
+ (count != sizeof(uint32_t)))
+ goto error_out;
+ if (count == sizeof(uint8_t)) {
+ if (where > LPFC_PCI_CFG_SIZE - sizeof(uint8_t))
+ goto error_out;
+ if (where % sizeof(uint8_t))
+ goto error_out;
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR)
+ pci_write_config_byte(pdev, where,
+ (uint8_t)value);
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST) {
+ rc = pci_read_config_byte(pdev, where, &u8val);
+ if (!rc) {
+ u8val |= (uint8_t)value;
+ pci_write_config_byte(pdev, where,
+ u8val);
+ }
+ }
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) {
+ rc = pci_read_config_byte(pdev, where, &u8val);
+ if (!rc) {
+ u8val &= (uint8_t)(~value);
+ pci_write_config_byte(pdev, where,
+ u8val);
+ }
+ }
+ }
+ if (count == sizeof(uint16_t)) {
+ if (where > LPFC_PCI_CFG_SIZE - sizeof(uint16_t))
+ goto error_out;
+ if (where % sizeof(uint16_t))
+ goto error_out;
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR)
+ pci_write_config_word(pdev, where,
+ (uint16_t)value);
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST) {
+ rc = pci_read_config_word(pdev, where, &u16val);
+ if (!rc) {
+ u16val |= (uint16_t)value;
+ pci_write_config_word(pdev, where,
+ u16val);
+ }
+ }
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) {
+ rc = pci_read_config_word(pdev, where, &u16val);
+ if (!rc) {
+ u16val &= (uint16_t)(~value);
+ pci_write_config_word(pdev, where,
+ u16val);
+ }
+ }
+ }
+ if (count == sizeof(uint32_t)) {
+ if (where > LPFC_PCI_CFG_SIZE - sizeof(uint32_t))
+ goto error_out;
+ if (where % sizeof(uint32_t))
+ goto error_out;
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR)
+ pci_write_config_dword(pdev, where, value);
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST) {
+ rc = pci_read_config_dword(pdev, where,
+ &u32val);
+ if (!rc) {
+ u32val |= value;
+ pci_write_config_dword(pdev, where,
+ u32val);
+ }
+ }
+ if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) {
+ rc = pci_read_config_dword(pdev, where,
+ &u32val);
+ if (!rc) {
+ u32val &= ~value;
+ pci_write_config_dword(pdev, where,
+ u32val);
+ }
+ }
+ }
+ } else
+ /* All other opecodes are illegal for now */
+ goto error_out;
+
+ return nbytes;
+error_out:
+ memset(&idiag, 0, sizeof(idiag));
+ return -EINVAL;
+}
+
+/**
+ * lpfc_idiag_queinfo_read - idiag debugfs read queue information
+ * @file: The file pointer to read from.
+ * @buf: The buffer to copy the data to.
+ * @nbytes: The number of bytes to read.
+ * @ppos: The position in the file to start reading from.
+ *
+ * Description:
+ * This routine reads data from the @phba SLI4 PCI function queue information,
+ * and copies to user @buf.
+ *
+ * Returns:
+ * This function returns the amount of data that was read (this could be less
+ * than @nbytes if the end of the file was reached) or a negative error value.
+ **/
+static ssize_t
+lpfc_idiag_queinfo_read(struct file *file, char __user *buf, size_t nbytes,
+ loff_t *ppos)
+{
+ struct lpfc_debug *debug = file->private_data;
+ struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
+ int len = 0, fcp_qidx;
+ char *pbuffer;
+
+ if (!debug->buffer)
+ debug->buffer = kmalloc(LPFC_QUE_INFO_GET_BUF_SIZE, GFP_KERNEL);
+ if (!debug->buffer)
+ return 0;
+ pbuffer = debug->buffer;
+
+ if (*ppos)
+ return 0;
+
+ /* Get slow-path event queue information */
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "Slow-path EQ information:\n");
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "\tID [%02d], EQE-COUNT [%04d], "
+ "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n",
+ phba->sli4_hba.sp_eq->queue_id,
+ phba->sli4_hba.sp_eq->entry_count,
+ phba->sli4_hba.sp_eq->host_index,
+ phba->sli4_hba.sp_eq->hba_index);
+
+ /* Get fast-path event queue information */
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "Fast-path EQ information:\n");
+ for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++) {
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "\tID [%02d], EQE-COUNT [%04d], "
+ "HOST-INDEX [%04x], PORT-INDEX [%04x]\n",
+ phba->sli4_hba.fp_eq[fcp_qidx]->queue_id,
+ phba->sli4_hba.fp_eq[fcp_qidx]->entry_count,
+ phba->sli4_hba.fp_eq[fcp_qidx]->host_index,
+ phba->sli4_hba.fp_eq[fcp_qidx]->hba_index);
+ }
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n");
+
+ /* Get mailbox complete queue information */
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "Mailbox CQ information:\n");
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "\t\tAssociated EQ-ID [%02d]:\n",
+ phba->sli4_hba.mbx_cq->assoc_qid);
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "\tID [%02d], CQE-COUNT [%04d], "
+ "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n",
+ phba->sli4_hba.mbx_cq->queue_id,
+ phba->sli4_hba.mbx_cq->entry_count,
+ phba->sli4_hba.mbx_cq->host_index,
+ phba->sli4_hba.mbx_cq->hba_index);
+
+ /* Get slow-path complete queue information */
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "Slow-path CQ information:\n");
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "\t\tAssociated EQ-ID [%02d]:\n",
+ phba->sli4_hba.els_cq->assoc_qid);
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "\tID [%02d], CQE-COUNT [%04d], "
+ "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n",
+ phba->sli4_hba.els_cq->queue_id,
+ phba->sli4_hba.els_cq->entry_count,
+ phba->sli4_hba.els_cq->host_index,
+ phba->sli4_hba.els_cq->hba_index);
+
+ /* Get fast-path complete queue information */
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "Fast-path CQ information:\n");
+ for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++) {
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "\t\tAssociated EQ-ID [%02d]:\n",
+ phba->sli4_hba.fcp_cq[fcp_qidx]->assoc_qid);
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "\tID [%02d], EQE-COUNT [%04d], "
+ "HOST-INDEX [%04x], PORT-INDEX [%04x]\n",
+ phba->sli4_hba.fcp_cq[fcp_qidx]->queue_id,
+ phba->sli4_hba.fcp_cq[fcp_qidx]->entry_count,
+ phba->sli4_hba.fcp_cq[fcp_qidx]->host_index,
+ phba->sli4_hba.fcp_cq[fcp_qidx]->hba_index);
+ }
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n");
+
+ /* Get mailbox queue information */
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "Mailbox MQ information:\n");
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "\t\tAssociated CQ-ID [%02d]:\n",
+ phba->sli4_hba.mbx_wq->assoc_qid);
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "\tID [%02d], MQE-COUNT [%04d], "
+ "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n",
+ phba->sli4_hba.mbx_wq->queue_id,
+ phba->sli4_hba.mbx_wq->entry_count,
+ phba->sli4_hba.mbx_wq->host_index,
+ phba->sli4_hba.mbx_wq->hba_index);
+
+ /* Get slow-path work queue information */
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "Slow-path WQ information:\n");
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "\t\tAssociated CQ-ID [%02d]:\n",
+ phba->sli4_hba.els_wq->assoc_qid);
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "\tID [%02d], WQE-COUNT [%04d], "
+ "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n",
+ phba->sli4_hba.els_wq->queue_id,
+ phba->sli4_hba.els_wq->entry_count,
+ phba->sli4_hba.els_wq->host_index,
+ phba->sli4_hba.els_wq->hba_index);
+
+ /* Get fast-path work queue information */
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "Fast-path WQ information:\n");
+ for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++) {
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "\t\tAssociated CQ-ID [%02d]:\n",
+ phba->sli4_hba.fcp_wq[fcp_qidx]->assoc_qid);
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "\tID [%02d], WQE-COUNT [%04d], "
+ "HOST-INDEX [%04x], PORT-INDEX [%04x]\n",
+ phba->sli4_hba.fcp_wq[fcp_qidx]->queue_id,
+ phba->sli4_hba.fcp_wq[fcp_qidx]->entry_count,
+ phba->sli4_hba.fcp_wq[fcp_qidx]->host_index,
+ phba->sli4_hba.fcp_wq[fcp_qidx]->hba_index);
+ }
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n");
+
+ /* Get receive queue information */
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "Slow-path RQ information:\n");
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "\t\tAssociated CQ-ID [%02d]:\n",
+ phba->sli4_hba.hdr_rq->assoc_qid);
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "\tID [%02d], RHQE-COUNT [%04d], "
+ "HOST-INDEX [%04x], PORT-INDEX [%04x]\n",
+ phba->sli4_hba.hdr_rq->queue_id,
+ phba->sli4_hba.hdr_rq->entry_count,
+ phba->sli4_hba.hdr_rq->host_index,
+ phba->sli4_hba.hdr_rq->hba_index);
+ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+ "\tID [%02d], RDQE-COUNT [%04d], "
+ "HOST-INDEX [%04x], PORT-INDEX [%04x]\n",
+ phba->sli4_hba.dat_rq->queue_id,
+ phba->sli4_hba.dat_rq->entry_count,
+ phba->sli4_hba.dat_rq->host_index,
+ phba->sli4_hba.dat_rq->hba_index);
+
+ return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
+}
+
#undef lpfc_debugfs_op_disc_trc
static const struct file_operations lpfc_debugfs_op_disc_trc = {
.owner = THIS_MODULE,
static struct dentry *lpfc_debugfs_root = NULL;
static atomic_t lpfc_debugfs_hba_count;
+
+/*
+ * File operations for the iDiag debugfs
+ */
+#undef lpfc_idiag_op_pciCfg
+static const struct file_operations lpfc_idiag_op_pciCfg = {
+ .owner = THIS_MODULE,
+ .open = lpfc_idiag_open,
+ .llseek = lpfc_debugfs_lseek,
+ .read = lpfc_idiag_pcicfg_read,
+ .write = lpfc_idiag_pcicfg_write,
+ .release = lpfc_idiag_cmd_release,
+};
+
+#undef lpfc_idiag_op_queInfo
+static const struct file_operations lpfc_idiag_op_queInfo = {
+ .owner = THIS_MODULE,
+ .open = lpfc_idiag_open,
+ .read = lpfc_idiag_queinfo_read,
+ .release = lpfc_idiag_release,
+};
+
#endif
/**
if (!lpfc_debugfs_start_time)
lpfc_debugfs_start_time = jiffies;
- /* Setup lpfcX directory for specific HBA */
- snprintf(name, sizeof(name), "lpfc%d", phba->brd_no);
+ /* Setup funcX directory for specific HBA PCI function */
+ snprintf(name, sizeof(name), "fn%d", phba->brd_no);
if (!phba->hba_debugfs_root) {
phba->hba_debugfs_root =
debugfs_create_dir(name, lpfc_debugfs_root);
}
/* Setup dumpHBASlim */
- snprintf(name, sizeof(name), "dumpHBASlim");
- phba->debug_dumpHBASlim =
- debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
- phba->hba_debugfs_root,
- phba, &lpfc_debugfs_op_dumpHBASlim);
- if (!phba->debug_dumpHBASlim) {
- lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
- "0413 Cannot create debugfs dumpHBASlim\n");
- goto debug_failed;
- }
+ if (phba->sli_rev < LPFC_SLI_REV4) {
+ snprintf(name, sizeof(name), "dumpHBASlim");
+ phba->debug_dumpHBASlim =
+ debugfs_create_file(name,
+ S_IFREG|S_IRUGO|S_IWUSR,
+ phba->hba_debugfs_root,
+ phba, &lpfc_debugfs_op_dumpHBASlim);
+ if (!phba->debug_dumpHBASlim) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "0413 Cannot create debugfs "
+ "dumpHBASlim\n");
+ goto debug_failed;
+ }
+ } else
+ phba->debug_dumpHBASlim = NULL;
/* Setup dumpHostSlim */
- snprintf(name, sizeof(name), "dumpHostSlim");
- phba->debug_dumpHostSlim =
- debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
- phba->hba_debugfs_root,
- phba, &lpfc_debugfs_op_dumpHostSlim);
- if (!phba->debug_dumpHostSlim) {
- lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
- "0414 Cannot create debugfs dumpHostSlim\n");
- goto debug_failed;
- }
+ if (phba->sli_rev < LPFC_SLI_REV4) {
+ snprintf(name, sizeof(name), "dumpHostSlim");
+ phba->debug_dumpHostSlim =
+ debugfs_create_file(name,
+ S_IFREG|S_IRUGO|S_IWUSR,
+ phba->hba_debugfs_root,
+ phba, &lpfc_debugfs_op_dumpHostSlim);
+ if (!phba->debug_dumpHostSlim) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "0414 Cannot create debugfs "
+ "dumpHostSlim\n");
+ goto debug_failed;
+ }
+ } else
+ phba->debug_dumpHBASlim = NULL;
/* Setup dumpData */
snprintf(name, sizeof(name), "dumpData");
goto debug_failed;
}
-
-
/* Setup slow ring trace */
if (lpfc_debugfs_max_slow_ring_trc) {
num = lpfc_debugfs_max_slow_ring_trc - 1;
}
}
-
snprintf(name, sizeof(name), "slow_ring_trace");
phba->debug_slow_ring_trc =
debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
"0409 Cant create debugfs nodelist\n");
goto debug_failed;
}
+
+ /*
+ * iDiag debugfs root entry points for SLI4 device only
+ */
+ if (phba->sli_rev < LPFC_SLI_REV4)
+ goto debug_failed;
+
+ snprintf(name, sizeof(name), "iDiag");
+ if (!phba->idiag_root) {
+ phba->idiag_root =
+ debugfs_create_dir(name, phba->hba_debugfs_root);
+ if (!phba->idiag_root) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "2922 Can't create idiag debugfs\n");
+ goto debug_failed;
+ }
+ /* Initialize iDiag data structure */
+ memset(&idiag, 0, sizeof(idiag));
+ }
+
+ /* iDiag read PCI config space */
+ snprintf(name, sizeof(name), "pciCfg");
+ if (!phba->idiag_pci_cfg) {
+ phba->idiag_pci_cfg =
+ debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
+ phba->idiag_root, phba, &lpfc_idiag_op_pciCfg);
+ if (!phba->idiag_pci_cfg) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "2923 Can't create idiag debugfs\n");
+ goto debug_failed;
+ }
+ idiag.offset.last_rd = 0;
+ }
+
+ /* iDiag get PCI function queue information */
+ snprintf(name, sizeof(name), "queInfo");
+ if (!phba->idiag_que_info) {
+ phba->idiag_que_info =
+ debugfs_create_file(name, S_IFREG|S_IRUGO,
+ phba->idiag_root, phba, &lpfc_idiag_op_queInfo);
+ if (!phba->idiag_que_info) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "2924 Can't create idiag debugfs\n");
+ goto debug_failed;
+ }
+ }
+
debug_failed:
return;
#endif
phba->debug_slow_ring_trc = NULL;
}
+ /*
+ * iDiag release
+ */
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ if (phba->idiag_que_info) {
+ /* iDiag queInfo */
+ debugfs_remove(phba->idiag_que_info);
+ phba->idiag_que_info = NULL;
+ }
+ if (phba->idiag_pci_cfg) {
+ /* iDiag pciCfg */
+ debugfs_remove(phba->idiag_pci_cfg);
+ phba->idiag_pci_cfg = NULL;
+ }
+
+ /* Finally remove the iDiag debugfs root */
+ if (phba->idiag_root) {
+ /* iDiag root */
+ debugfs_remove(phba->idiag_root);
+ phba->idiag_root = NULL;
+ }
+ }
+
if (phba->hba_debugfs_root) {
- debugfs_remove(phba->hba_debugfs_root); /* lpfcX */
+ debugfs_remove(phba->hba_debugfs_root); /* fnX */
phba->hba_debugfs_root = NULL;
atomic_dec(&lpfc_debugfs_hba_count);
}
projects / linux-beck.git / commitdiff