ARM: tegra: fix DT node ordering in Tegra30 Cardhu

Nodes should be sorted by reg. Fix location of the tps62361 node.

Signed-off-by: Stephen Warren <swarren@nvidia.com>

diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index e5759caae770c34d8b90c508df55e0496f839a50..c011b6797648fe4d143c5ddced40b0f9a38adfe0 100644 (file)
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -173,19 +173,6 @@
                        gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
                };
 
-               tps62361 {
-                       compatible = "ti,tps62361";
-                       reg = <0x60>;
-
-                       regulator-name = "tps62361-vout";
-                       regulator-min-microvolt = <500000>;
-                       regulator-max-microvolt = <1500000>;
-                       regulator-boot-on;
-                       regulator-always-on;
-                       ti,vsel0-state-high;
-                       ti,vsel1-state-high;
-               };
-
                pmic: tps65911@2d {
                        compatible = "ti,tps65911";
                        reg = <0x2d>;
@@ -293,6 +280,19 @@
                        interrupt-parent = <&gpio>;
                        interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
                };
+
+               tps62361 {
+                       compatible = "ti,tps62361";
+                       reg = <0x60>;
+
+                       regulator-name = "tps62361-vout";
+                       regulator-min-microvolt = <500000>;
+                       regulator-max-microvolt = <1500000>;
+                       regulator-boot-on;
+                       regulator-always-on;
+                       ti,vsel0-state-high;
+                       ti,vsel1-state-high;
+               };
        };
 
        spi@7000da00 {