Remove defined constants not being used.
Signed-off-by: Armando Uribe <x0095078@ti.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
#define BRD_IDLE 0x1 /* Monitor Loaded, but suspended. */
#define BRD_RUNNING 0x2 /* Monitor loaded, and executing. */
#define BRD_UNKNOWN 0x3 /* Board state is indeterminate. */
-#define BRD_SYNCINIT 0x4
#define BRD_LOADED 0x5
-#define BRD_LASTSTATE BRD_LOADED /* Set to highest legal board state. */
#define BRD_SLEEP_TRANSITION 0x6 /* Sleep transition in progress */
#define BRD_HIBERNATION 0x7 /* MPU initiated hibernation */
#define BRD_RETENTION 0x8 /* Retention mode */
#ifndef CFGDEFS_
#define CFGDEFS_
-/* Maximum length of module search path. */
-#define CFG_MAXSEARCHPATHLEN 255
-
-/* Maximum length of general paths. */
-#define CFG_MAXPATH 255
-
/* Host Resources: */
#define CFG_MAXMEMREGISTERS 9
-#define CFG_MAXIOPORTS 20
-#define CFG_MAXIRQS 7
-#define CFG_MAXDMACHANNELS 7
/* IRQ flag */
#define CFG_IRQSHARED 0x01 /* IRQ can be shared */
-/* DSP Resources: */
-#define CFG_DSPMAXMEMTYPES 10
-#define CFG_DEFAULT_NUM_WINDOWS 1 /* We support only one window. */
-
/* A platform-related device handle: */
struct cfg_devnode;
/* Channel id option. */
#define CHNL_PICKFREE (~0UL) /* Let manager pick a free channel. */
-/* Channel manager limits: */
-#define CHNL_INITIOREQS 4 /* Default # of I/O requests. */
-
/* Channel modes */
#define CHNL_MODETODSP 0 /* Data streaming to the DSP. */
#define CHNL_MODEFROMDSP 1 /* Data streaming from the DSP. */
*/
#define CHNL_PCPY 0 /* Proc-copy transport 0 */
-#define CHNL_MAXIRQ 0xff /* Arbitrarily large number. */
-
-/* The following modes are private: */
-#define CHNL_MODEUSEREVENT 0x1000 /* User provided the channel event. */
-#define CHNL_MODEMASK 0x1001
-
/* Higher level channel states: */
#define CHNL_STATEREADY 0 /* Channel ready for I/O. */
#define CHNL_STATECANCEL 1 /* I/O was cancelled. */
/* Types of channel class libraries: */
#define CHNL_TYPESM 1 /* Shared memory driver. */
-#define CHNL_TYPEBM 2 /* Bus Mastering driver. */
-
-/* Max string length of channel I/O completion event name - change if needed */
-#define CHNL_MAXEVTNAMELEN 32
-
-/* Max memory pages lockable in CHNL_PrepareBuffer() - change if needed */
-#define CHNL_MAXLOCKPAGES 64
/* Channel info. */
struct chnl_info {
#define COD_TRACEBEG "SYS_PUTCBEG"
#define COD_TRACEEND "SYS_PUTCEND"
#define COD_TRACECURPOS "BRIDGE_SYS_PUTC_current"
-#define COD_TRACESECT "trace"
-#define COD_TRACEBEGOLD "PUTCBEG"
-#define COD_TRACEENDOLD "PUTCEND"
#define COD_NOLOAD DBLL_NOLOAD
#define COD_SYMB DBLL_SYMB
/* API return value and calling convention */
#define DBAPI int
-/* Infinite time value for the utimeout parameter to DSPStream_Select() */
-#define DSP_FOREVER (-1)
-
/* Maximum length of node name, used in dsp_ndbprops */
#define DSP_MAXNAMELEN 32
#define DSP_NODE_MIN_PRIORITY 1
#define DSP_NODE_MAX_PRIORITY 15
-/* Pre-Defined Message Command Codes available to user: */
-#define DSP_RMSUSERCODESTART RMS_USER /* Start of RMS user cmd codes */
-/* end of user codes */
-#define DSP_RMSUSERCODEEND (RMS_USER + RMS_MAXUSERCODES);
/* msg_ctrl contains SM buffer description */
#define DSP_RMSBUFDESC RMS_BUFDESC
-/* Shared memory identifier for MEM segment named "SHMSEG0" */
-#define DSP_SHMSEG0 (u32)(-1)
-
/* Processor ID numbers */
#define DSP_UNIT 0
#define IVA_UNIT 1
#define DSPWORD unsigned char
#define DSPWORDSIZE sizeof(DSPWORD)
-/* Power control enumerations */
-#define PROC_PWRCONTROL 0x8070
-
-#define PROC_PWRMGT_ENABLE (PROC_PWRCONTROL + 0x3)
-#define PROC_PWRMGT_DISABLE (PROC_PWRCONTROL + 0x4)
-
-/* Bridge Code Version */
-#define BRIDGE_VERSION_CODE 333
-
#define MAX_PROFILES 16
/* DSP chip type */
#define DSPPROCTYPE_C64 6410
#define IVAPROCTYPE_ARM7 470
-#define REG_MGR_OBJECT 1
-#define REG_DRV_OBJECT 2
-
-/* registry */
-#define DRVOBJECT "DrvObject"
-#define MGROBJECT "MgrObject"
-
/* Max registry path length. Also the max registry value length. */
#define MAXREGPATHLENGTH 255
#ifndef DBLDEFS_
#define DBLDEFS_
-/*
- * Bit masks for dbl_flags.
- */
-#define DBL_NOLOAD 0x0 /* Don't load symbols, code, or data */
-#define DBL_SYMB 0x1 /* load symbols */
-#define DBL_CODE 0x2 /* load code */
-#define DBL_DATA 0x4 /* load data */
-#define DBL_DYNAMIC 0x8 /* dynamic load */
-#define DBL_BSS 0x20 /* Unitialized section */
-
-#define DBL_MAXPATHLENGTH 255
/*
* ======== dbl_flags ========
/* Magic code used to determine if DSP signaled exception. */
#define DEH_BASE MBX_DEH_BASE
-#define DEH_USERS_BASE MBX_DEH_USERS_BASE
#define DEH_LIMIT MBX_DEH_LIMIT
#endif /* _DEHDEFS_H */
#include <dspbridge/drvdefs.h>
#include <linux/idr.h>
-#define DRV_ASSIGN 1
-#define DRV_RELEASE 0
-
/* Provide the DSP Internal memory windows that can be accessed from L3 address
* space */
/* MEM1 is L2 RAM + L2 Cache space */
#define OMAP_DSP_MEM1_BASE 0x5C7F8000
#define OMAP_DSP_MEM1_SIZE 0x18000
-#define OMAP_DSP_GEM1_BASE 0x107F8000
/* MEM2 is L1P RAM/CACHE space */
#define OMAP_DSP_MEM2_BASE 0x5CE00000
#define OMAP_DSP_MEM2_SIZE 0x8000
-#define OMAP_DSP_GEM2_BASE 0x10E00000
/* MEM3 is L1D RAM/CACHE space */
#define OMAP_DSP_MEM3_BASE 0x5CF04000
#define OMAP_DSP_MEM3_SIZE 0x14000
-#define OMAP_DSP_GEM3_BASE 0x10F04000
-
-#define OMAP_IVA2_PRM_BASE 0x48306000
-#define OMAP_IVA2_PRM_SIZE 0x1000
-
-#define OMAP_IVA2_CM_BASE 0x48004000
-#define OMAP_IVA2_CM_SIZE 0x1000
#define OMAP_PER_CM_BASE 0x48005000
#define OMAP_PER_CM_SIZE 0x1000
#define OMAP_DMMU_BASE 0x5D000000
#define OMAP_DMMU_SIZE 0x1000
-#define OMAP_PRCM_VDD1_DOMAIN 1
-#define OMAP_PRCM_VDD2_DOMAIN 2
-
/* GPP PROCESS CLEANUP Data structures */
/* New structure (member of process context) abstracts NODE resource info */
#include <dspbridge/iodefs.h>
#include <dspbridge/msgdefs.h>
-/*
- * Any IOCTLS at or above this value are reserved for standard Bridge driver
- * interfaces.
- */
-#define BRD_RESERVEDIOCTLBASE 0x8000
-
/* Handle to Bridge driver's private device context. */
struct bridge_dev_context;
#if !defined _DSPDRV_H_
#define _DSPDRV_H_
-#define MAX_DEV 10 /* Max support of 10 devices */
-
/*
* ======== dsp_deinit ========
* Purpose:
#define BRDIOCTL_CHNLREAD (BRDIOCTL_RESERVEDBASE + 0x10)
#define BRDIOCTL_CHNLWRITE (BRDIOCTL_RESERVEDBASE + 0x20)
-#define BRDIOCTL_GETINTRCOUNT (BRDIOCTL_RESERVEDBASE + 0x30)
-#define BRDIOCTL_RESETINTRCOUNT (BRDIOCTL_RESERVEDBASE + 0x40)
-#define BRDIOCTL_INTERRUPTDSP (BRDIOCTL_RESERVEDBASE + 0x50)
/* DMMU */
#define BRDIOCTL_SETMMUCONFIG (BRDIOCTL_RESERVEDBASE + 0x60)
/* PWR */
#define BRDIOCTL_DEEPSLEEP (BRDIOCTL_PWRCONTROL + 0x0)
#define BRDIOCTL_EMERGENCYSLEEP (BRDIOCTL_PWRCONTROL + 0x1)
#define BRDIOCTL_WAKEUP (BRDIOCTL_PWRCONTROL + 0x2)
-#define BRDIOCTL_PWRENABLE (BRDIOCTL_PWRCONTROL + 0x3)
-#define BRDIOCTL_PWRDISABLE (BRDIOCTL_PWRCONTROL + 0x4)
#define BRDIOCTL_CLK_CTRL (BRDIOCTL_PWRCONTROL + 0x7)
/* DSP Initiated Hibernate */
#define BRDIOCTL_PWR_HIBERNATE (BRDIOCTL_PWRCONTROL + 0x8)
* Option flags to modify the behavior of module loading
*/
#define DLOAD_INITBSS 0x1 /* initialize BSS sections to zero */
-#define DLOAD_BIGEND 0x2 /* require big-endian load module */
-#define DLOAD_LITTLE 0x4 /* require little-endian load module */
/*****************************************************************************
* Procedure dynamic_load_module
#define IO_INPUT 0
#define IO_OUTPUT 1
#define IO_SERVICE 2
-#define IO_MAXSERVICE IO_SERVICE
#ifdef CONFIG_TIDSPBRIDGE_DVFS
/* The maximum number of OPPs that are supported */
#ifndef IODEFS_
#define IODEFS_
-#define IO_MAXIRQ 0xff /* Arbitrarily large number. */
-
/* IO Objects: */
struct io_mgr;
#ifndef _MBX_SH_H
#define _MBX_SH_H
-#define MBX_CLASS_MSK 0xFC00 /* Class bits are 10 thru 15 */
-#define MBX_VALUE_MSK 0x03FF /* Value is 0 thru 9 */
-
-#define MBX_DEH_CLASS 0x0000 /* DEH owns Mbx INTR */
-#define MBX_DDMA_CLASS 0x0400 /* DSP-DMA link drvr chnls owns INTR */
#define MBX_PCPY_CLASS 0x0800 /* PROC-COPY " */
-#define MBX_ZCPY_CLASS 0x1000 /* ZERO-COPY " */
#define MBX_PM_CLASS 0x2000 /* Power Management */
#define MBX_DBG_CLASS 0x4000 /* For debugging purpose */
#define MBX_DEH_USERS_BASE 0x100 /* 256 */
#define MBX_DEH_LIMIT 0x3FF /* 1023 */
#define MBX_DEH_RESET 0x101 /* DSP RESET (DEH) */
-#define MBX_DEH_EMMU 0X103 /*DSP MMU FAULT RECOVERY */
/*
* Link driver command/status codes.
*/
-/* DSP-DMA */
-#define MBX_DDMA_NUMCHNLBITS 5 /* # chnl Id: # bits available */
-#define MBX_DDMA_CHNLSHIFT 0 /* # of bits to shift */
-#define MBX_DDMA_CHNLMSK 0x01F /* bits 0 thru 4 */
-
-#define MBX_DDMA_NUMBUFBITS 5 /* buffer index: # of bits avail */
-#define MBX_DDMA_BUFSHIFT (MBX_DDMA_NUMCHNLBITS + MBX_DDMA_CHNLSHIFT)
-#define MBX_DDMA_BUFMSK 0x3E0 /* bits 5 thru 9 */
-
-/* Zero-Copy */
-#define MBX_ZCPY_NUMCHNLBITS 5 /* # chnl Id: # bits available */
-#define MBX_ZCPY_CHNLSHIFT 0 /* # of bits to shift */
-#define MBX_ZCPY_CHNLMSK 0x01F /* bits 0 thru 4 */
/* Power Management Commands */
#define MBX_PM_DSPIDLE (MBX_PM_CLASS + 0x0)
#define MBX_PM_DSPWAKEUP (MBX_PM_CLASS + 0x1)
#define MBX_PM_EMERGENCYSLEEP (MBX_PM_CLASS + 0x2)
-#define MBX_PM_SLEEPUNTILRESTART (MBX_PM_CLASS + 0x3)
-#define MBX_PM_DSPGLOBALIDLE_OFF (MBX_PM_CLASS + 0x4)
-#define MBX_PM_DSPGLOBALIDLE_ON (MBX_PM_CLASS + 0x5)
#define MBX_PM_SETPOINT_PRENOTIFY (MBX_PM_CLASS + 0x6)
#define MBX_PM_SETPOINT_POSTNOTIFY (MBX_PM_CLASS + 0x7)
-#define MBX_PM_DSPRETN (MBX_PM_CLASS + 0x8)
#define MBX_PM_DSPRETENTION (MBX_PM_CLASS + 0x8)
#define MBX_PM_DSPHIBERNATE (MBX_PM_CLASS + 0x9)
#define MBX_PM_HIBERNATE_EN (MBX_PM_CLASS + 0xA)
#define MBX_PM_OPP_REQ (MBX_PM_CLASS + 0xB)
-#define MBX_PM_OPP_CHG (MBX_PM_CLASS + 0xC)
-
-#define MBX_PM_TYPE_MASK 0x0300
-#define MBX_PM_TYPE_PWR_CHNG 0x0100
-#define MBX_PM_TYPE_OPP_PRECHNG 0x0200
-#define MBX_PM_TYPE_OPP_POSTCHNG 0x0300
-#define MBX_PM_TYPE_OPP_MASK 0x0300
-#define MBX_PM_OPP_PRECHNG (MBX_PM_CLASS | MBX_PM_TYPE_OPP_PRECHNG)
-/* DSP to MPU */
-#define MBX_PM_OPP_CHNG(OPP) (MBX_PM_CLASS | MBX_PM_TYPE_OPP_PRECHNG | (OPP))
-#define MBX_PM_RET (MBX_PM_CLASS | MBX_PM_TYPE_PWR_CHNG | 0x0006)
-#define MBX_PM_HIB (MBX_PM_CLASS | MBX_PM_TYPE_PWR_CHNG | 0x0002)
-#define MBX_PM_OPP1 0
-#define MBX_PM_OPP2 1
-#define MBX_PM_OPP3 2
-#define MBX_PM_OPP4 3
/* Bridge Debug Commands */
#define MBX_DBG_SYSPRINTF (MBX_DBG_CLASS + 0x0)
/* valid sleep command codes that can be sent by GPP via mailbox: */
#define PWR_DEEPSLEEP MBX_PM_DSPIDLE
#define PWR_EMERGENCYDEEPSLEEP MBX_PM_EMERGENCYSLEEP
-#define PWR_SLEEPUNTILRESTART MBX_PM_SLEEPUNTILRESTART
#define PWR_WAKEUP MBX_PM_DSPWAKEUP
-#define PWR_AUTOENABLE MBX_PM_PWRENABLE
-#define PWR_AUTODISABLE MBX_PM_PWRDISABLE
-#define PWR_RETENTION MBX_PM_DSPRETN
#endif /* PWR_SH_ */
#include <dspbridge/rmstypes.h>
-/* Node Types: */
-#define RMS_TASK 1 /* Task node */
-#define RMS_DAIS 2 /* xDAIS socket node */
-#define RMS_MSG 3 /* Message node */
-
/* Memory Types: */
#define RMS_CODE 0 /* Program space */
#define RMS_DATA 1 /* Data space */
-#define RMS_IO 2 /* I/O space */
/* RM Server Command and Response Buffer Sizes: */
#define RMS_COMMANDBUFSIZE 256 /* Size of command buffer */
-#define RMS_RESPONSEBUFSIZE 16 /* Size of response buffer */
/* Pre-Defined Command/Response Codes: */
#define RMS_EXIT 0x80000000 /* GPP->Node: shutdown */
#define RMS_EXITACK 0x40000000 /* Node->GPP: ack shutdown */
#define RMS_BUFDESC 0x20000000 /* Arg1 SM buf, Arg2 SM size */
#define RMS_KILLTASK 0x10000000 /* GPP->Node: Kill Task */
-#define RMS_USER 0x0 /* Start of user-defined msg codes */
-#define RMS_MAXUSERCODES 0xfff /* Maximum user defined C/R Codes */
/* RM Server RPC Command Structure: */
struct rms_command {
#ifndef STRMDEFS_
#define STRMDEFS_
-#define STRM_MAXEVTNAMELEN 32
-
struct strm_mgr;
struct strm_object;
{
struct dev_object *hdev_obj = NULL; /* handle to 'Bridge Device */
/* Bridge driver filename */
- char bridge_file_name[CFG_MAXSEARCHPATHLEN] = "UMA";
+ char *bridge_file_name = "UMA";
int status;
struct mgr_object *hmgr_obj = NULL;
struct drv_data *drv_datap = dev_get_drvdata(bridge);
projects / linux-beck.git / commitdiff