}
}
+static void i9xx_pfit_enable(struct intel_crtc *crtc)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc_config *pipe_config = &crtc->config;
+
+ if (!(intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP) ||
+ intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS)))
+ return;
+
+ WARN_ON(I915_READ(PFIT_CONTROL) & PFIT_ENABLE);
+ assert_pipe_disabled(dev_priv, crtc->pipe);
+
+ /*
+ * Enable automatic panel scaling so that non-native modes
+ * fill the screen. The panel fitter should only be
+ * adjusted whilst the pipe is disabled, according to
+ * register description and PRM.
+ */
+ DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
+ pipe_config->pfit_control,
+ pipe_config->pfit_pgm_ratios);
+
+ I915_WRITE(PFIT_PGM_RATIOS, pipe_config->pfit_pgm_ratios);
+ I915_WRITE(PFIT_CONTROL, pipe_config->pfit_control);
+}
+
static void valleyview_crtc_enable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
for_each_encoder_on_crtc(dev, crtc, encoder)
encoder->enable(encoder);
+ /* Enable panel fitting for eDP */
+ i9xx_pfit_enable(intel_crtc);
+
intel_enable_pipe(dev_priv, pipe, false);
intel_enable_plane(dev_priv, plane, pipe);
if (encoder->pre_enable)
encoder->pre_enable(encoder);
+ /* Enable panel fitting for LVDS */
+ i9xx_pfit_enable(intel_crtc);
+
intel_enable_pipe(dev_priv, pipe, false);
intel_enable_plane(dev_priv, plane, pipe);
if (IS_G4X(dev))
struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
struct drm_display_mode *mode = &pipe_config->requested_mode;
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+ struct intel_crtc *intel_crtc = encoder->new_crtc;
struct intel_connector *intel_connector = intel_dp->attached_connector;
int lane_count, clock;
int max_lane_count = drm_dp_max_lane_count(intel_dp->dpcd);
if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) {
intel_fixed_panel_mode(intel_connector->panel.fixed_mode,
adjusted_mode);
- intel_pch_panel_fitting(dev,
- intel_connector->panel.fitting_mode,
- mode, adjusted_mode);
+ if (!HAS_PCH_SPLIT(dev))
+ intel_gmch_panel_fitting(intel_crtc, pipe_config,
+ intel_connector->panel.fitting_mode);
+ else
+ intel_pch_panel_fitting(dev,
+ intel_connector->panel.fitting_mode,
+ mode, adjusted_mode);
}
/* We need to take the panel's fixed mode into account. */
target_clock = adjusted_mode->clock;
int pixel_target_clock;
/* Used by SDVO (and if we ever fix it, HDMI). */
unsigned pixel_multiplier;
+
+ /* Panel fitter controls for gen2-gen4 + VLV */
+ u32 pfit_control, pfit_pgm_ratios;
};
struct intel_crtc {
int fitting_mode,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
+extern void intel_gmch_panel_fitting(struct intel_crtc *crtc,
+ struct intel_crtc_config *pipe_config,
+ int fitting_mode);
extern void intel_panel_set_backlight(struct drm_device *dev,
u32 level, u32 max);
extern int intel_panel_setup_backlight(struct drm_connector *connector);
struct intel_lvds_encoder {
struct intel_encoder base;
- u32 pfit_control;
- u32 pfit_pgm_ratios;
bool is_dual_link;
u32 reg;
I915_WRITE(lvds_encoder->reg, temp);
}
-static void intel_pre_enable_lvds(struct intel_encoder *encoder)
-{
- struct drm_device *dev = encoder->base.dev;
- struct intel_lvds_encoder *enc = to_lvds_encoder(&encoder->base);
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- if (HAS_PCH_SPLIT(dev) || !enc->pfit_control)
- return;
-
- WARN_ON(I915_READ(PFIT_CONTROL) & PFIT_ENABLE);
- assert_pipe_disabled(dev_priv, to_intel_crtc(encoder->base.crtc)->pipe);
-
- /*
- * Enable automatic panel scaling so that non-native modes
- * fill the screen. The panel fitter should only be
- * adjusted whilst the pipe is disabled, according to
- * register description and PRM.
- */
- DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
- enc->pfit_control,
- enc->pfit_pgm_ratios);
-
- I915_WRITE(PFIT_PGM_RATIOS, enc->pfit_pgm_ratios);
- I915_WRITE(PFIT_CONTROL, enc->pfit_control);
-}
-
/**
* Sets the power state for the panel.
*/
return MODE_OK;
}
-static void
-centre_horizontally(struct drm_display_mode *mode,
- int width)
-{
- u32 border, sync_pos, blank_width, sync_width;
-
- /* keep the hsync and hblank widths constant */
- sync_width = mode->crtc_hsync_end - mode->crtc_hsync_start;
- blank_width = mode->crtc_hblank_end - mode->crtc_hblank_start;
- sync_pos = (blank_width - sync_width + 1) / 2;
-
- border = (mode->hdisplay - width + 1) / 2;
- border += border & 1; /* make the border even */
-
- mode->crtc_hdisplay = width;
- mode->crtc_hblank_start = width + border;
- mode->crtc_hblank_end = mode->crtc_hblank_start + blank_width;
-
- mode->crtc_hsync_start = mode->crtc_hblank_start + sync_pos;
- mode->crtc_hsync_end = mode->crtc_hsync_start + sync_width;
-}
-
-static void
-centre_vertically(struct drm_display_mode *mode,
- int height)
-{
- u32 border, sync_pos, blank_width, sync_width;
-
- /* keep the vsync and vblank widths constant */
- sync_width = mode->crtc_vsync_end - mode->crtc_vsync_start;
- blank_width = mode->crtc_vblank_end - mode->crtc_vblank_start;
- sync_pos = (blank_width - sync_width + 1) / 2;
-
- border = (mode->vdisplay - height + 1) / 2;
-
- mode->crtc_vdisplay = height;
- mode->crtc_vblank_start = height + border;
- mode->crtc_vblank_end = mode->crtc_vblank_start + blank_width;
-
- mode->crtc_vsync_start = mode->crtc_vblank_start + sync_pos;
- mode->crtc_vsync_end = mode->crtc_vsync_start + sync_width;
-}
-
-static inline u32 panel_fitter_scaling(u32 source, u32 target)
-{
- /*
- * Floating point operation is not supported. So the FACTOR
- * is defined, which can avoid the floating point computation
- * when calculating the panel ratio.
- */
-#define ACCURACY 12
-#define FACTOR (1 << ACCURACY)
- u32 ratio = source * FACTOR / target;
- return (FACTOR * ratio + FACTOR/2) / FACTOR;
-}
-
static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder,
struct intel_crtc_config *pipe_config)
{
struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
struct drm_display_mode *mode = &pipe_config->requested_mode;
struct intel_crtc *intel_crtc = lvds_encoder->base.new_crtc;
- u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0;
unsigned int lvds_bpp;
int pipe;
DRM_DEBUG_KMS("forcing display bpp (was %d) to LVDS (%d)\n",
pipe_config->pipe_bpp, lvds_bpp);
pipe_config->pipe_bpp = lvds_bpp;
-
- /* Make sure pre-965 set dither correctly for 18bpp panels. */
- if (INTEL_INFO(dev)->gen < 4 && lvds_bpp == 18)
- pfit_control |= PANEL_8TO6_DITHER_ENABLE;
-
}
/*
intel_connector->panel.fitting_mode,
mode, adjusted_mode);
return true;
+ } else {
+ intel_gmch_panel_fitting(intel_crtc, pipe_config,
+ intel_connector->panel.fitting_mode);
}
- /* Native modes don't need fitting */
- if (adjusted_mode->hdisplay == mode->hdisplay &&
- adjusted_mode->vdisplay == mode->vdisplay)
- goto out;
-
- /* 965+ wants fuzzy fitting */
- if (INTEL_INFO(dev)->gen >= 4)
- pfit_control |= ((intel_crtc->pipe << PFIT_PIPE_SHIFT) |
- PFIT_FILTER_FUZZY);
-
/*
* Enable automatic panel scaling for non-native modes so that they fill
* the screen. Should be enabled before the pipe is enabled, according
drm_mode_set_crtcinfo(adjusted_mode, 0);
pipe_config->timings_set = true;
- switch (intel_connector->panel.fitting_mode) {
- case DRM_MODE_SCALE_CENTER:
- /*
- * For centered modes, we have to calculate border widths &
- * heights and modify the values programmed into the CRTC.
- */
- centre_horizontally(adjusted_mode, mode->hdisplay);
- centre_vertically(adjusted_mode, mode->vdisplay);
- border = LVDS_BORDER_ENABLE;
- break;
-
- case DRM_MODE_SCALE_ASPECT:
- /* Scale but preserve the aspect ratio */
- if (INTEL_INFO(dev)->gen >= 4) {
- u32 scaled_width = adjusted_mode->hdisplay * mode->vdisplay;
- u32 scaled_height = mode->hdisplay * adjusted_mode->vdisplay;
-
- /* 965+ is easy, it does everything in hw */
- if (scaled_width > scaled_height)
- pfit_control |= PFIT_ENABLE | PFIT_SCALING_PILLAR;
- else if (scaled_width < scaled_height)
- pfit_control |= PFIT_ENABLE | PFIT_SCALING_LETTER;
- else if (adjusted_mode->hdisplay != mode->hdisplay)
- pfit_control |= PFIT_ENABLE | PFIT_SCALING_AUTO;
- } else {
- u32 scaled_width = adjusted_mode->hdisplay * mode->vdisplay;
- u32 scaled_height = mode->hdisplay * adjusted_mode->vdisplay;
- /*
- * For earlier chips we have to calculate the scaling
- * ratio by hand and program it into the
- * PFIT_PGM_RATIO register
- */
- if (scaled_width > scaled_height) { /* pillar */
- centre_horizontally(adjusted_mode, scaled_height / mode->vdisplay);
-
- border = LVDS_BORDER_ENABLE;
- if (mode->vdisplay != adjusted_mode->vdisplay) {
- u32 bits = panel_fitter_scaling(mode->vdisplay, adjusted_mode->vdisplay);
- pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
- bits << PFIT_VERT_SCALE_SHIFT);
- pfit_control |= (PFIT_ENABLE |
- VERT_INTERP_BILINEAR |
- HORIZ_INTERP_BILINEAR);
- }
- } else if (scaled_width < scaled_height) { /* letter */
- centre_vertically(adjusted_mode, scaled_width / mode->hdisplay);
-
- border = LVDS_BORDER_ENABLE;
- if (mode->hdisplay != adjusted_mode->hdisplay) {
- u32 bits = panel_fitter_scaling(mode->hdisplay, adjusted_mode->hdisplay);
- pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
- bits << PFIT_VERT_SCALE_SHIFT);
- pfit_control |= (PFIT_ENABLE |
- VERT_INTERP_BILINEAR |
- HORIZ_INTERP_BILINEAR);
- }
- } else
- /* Aspects match, Let hw scale both directions */
- pfit_control |= (PFIT_ENABLE |
- VERT_AUTO_SCALE | HORIZ_AUTO_SCALE |
- VERT_INTERP_BILINEAR |
- HORIZ_INTERP_BILINEAR);
- }
- break;
-
- case DRM_MODE_SCALE_FULLSCREEN:
- /*
- * Full scaling, even if it changes the aspect ratio.
- * Fortunately this is all done for us in hw.
- */
- if (mode->vdisplay != adjusted_mode->vdisplay ||
- mode->hdisplay != adjusted_mode->hdisplay) {
- pfit_control |= PFIT_ENABLE;
- if (INTEL_INFO(dev)->gen >= 4)
- pfit_control |= PFIT_SCALING_AUTO;
- else
- pfit_control |= (VERT_AUTO_SCALE |
- VERT_INTERP_BILINEAR |
- HORIZ_AUTO_SCALE |
- HORIZ_INTERP_BILINEAR);
- }
- break;
-
- default:
- break;
- }
-
-out:
- /* If not enabling scaling, be consistent and always use 0. */
- if ((pfit_control & PFIT_ENABLE) == 0) {
- pfit_control = 0;
- pfit_pgm_ratios = 0;
- }
-
- if (pfit_control != lvds_encoder->pfit_control ||
- pfit_pgm_ratios != lvds_encoder->pfit_pgm_ratios) {
- lvds_encoder->pfit_control = pfit_control;
- lvds_encoder->pfit_pgm_ratios = pfit_pgm_ratios;
- }
- dev_priv->lvds_border_bits = border;
-
/*
* XXX: It would be nice to support lower refresh rates on the
* panels to reduce power consumption, and perhaps match the
lvds_encoder->attached_connector = lvds_connector;
- if (!HAS_PCH_SPLIT(dev)) {
- lvds_encoder->pfit_control = I915_READ(PFIT_CONTROL);
- }
-
intel_encoder = &lvds_encoder->base;
encoder = &intel_encoder->base;
intel_connector = &lvds_connector->base;
DRM_MODE_ENCODER_LVDS);
intel_encoder->enable = intel_enable_lvds;
- intel_encoder->pre_enable = intel_pre_enable_lvds;
intel_encoder->pre_pll_enable = intel_pre_pll_enable_lvds;
intel_encoder->compute_config = intel_lvds_compute_config;
intel_encoder->disable = intel_disable_lvds;
dev_priv->pch_pf_size = (width << 16) | height;
}
+static void
+centre_horizontally(struct drm_display_mode *mode,
+ int width)
+{
+ u32 border, sync_pos, blank_width, sync_width;
+
+ /* keep the hsync and hblank widths constant */
+ sync_width = mode->crtc_hsync_end - mode->crtc_hsync_start;
+ blank_width = mode->crtc_hblank_end - mode->crtc_hblank_start;
+ sync_pos = (blank_width - sync_width + 1) / 2;
+
+ border = (mode->hdisplay - width + 1) / 2;
+ border += border & 1; /* make the border even */
+
+ mode->crtc_hdisplay = width;
+ mode->crtc_hblank_start = width + border;
+ mode->crtc_hblank_end = mode->crtc_hblank_start + blank_width;
+
+ mode->crtc_hsync_start = mode->crtc_hblank_start + sync_pos;
+ mode->crtc_hsync_end = mode->crtc_hsync_start + sync_width;
+}
+
+static void
+centre_vertically(struct drm_display_mode *mode,
+ int height)
+{
+ u32 border, sync_pos, blank_width, sync_width;
+
+ /* keep the vsync and vblank widths constant */
+ sync_width = mode->crtc_vsync_end - mode->crtc_vsync_start;
+ blank_width = mode->crtc_vblank_end - mode->crtc_vblank_start;
+ sync_pos = (blank_width - sync_width + 1) / 2;
+
+ border = (mode->vdisplay - height + 1) / 2;
+
+ mode->crtc_vdisplay = height;
+ mode->crtc_vblank_start = height + border;
+ mode->crtc_vblank_end = mode->crtc_vblank_start + blank_width;
+
+ mode->crtc_vsync_start = mode->crtc_vblank_start + sync_pos;
+ mode->crtc_vsync_end = mode->crtc_vsync_start + sync_width;
+}
+
+static inline u32 panel_fitter_scaling(u32 source, u32 target)
+{
+ /*
+ * Floating point operation is not supported. So the FACTOR
+ * is defined, which can avoid the floating point computation
+ * when calculating the panel ratio.
+ */
+#define ACCURACY 12
+#define FACTOR (1 << ACCURACY)
+ u32 ratio = source * FACTOR / target;
+ return (FACTOR * ratio + FACTOR/2) / FACTOR;
+}
+
+void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc,
+ struct intel_crtc_config *pipe_config,
+ int fitting_mode)
+{
+ struct drm_device *dev = intel_crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0;
+ struct drm_display_mode *mode, *adjusted_mode;
+
+ mode = &pipe_config->requested_mode;
+ adjusted_mode = &pipe_config->adjusted_mode;
+
+ /* Native modes don't need fitting */
+ if (adjusted_mode->hdisplay == mode->hdisplay &&
+ adjusted_mode->vdisplay == mode->vdisplay)
+ goto out;
+
+ switch (fitting_mode) {
+ case DRM_MODE_SCALE_CENTER:
+ /*
+ * For centered modes, we have to calculate border widths &
+ * heights and modify the values programmed into the CRTC.
+ */
+ centre_horizontally(adjusted_mode, mode->hdisplay);
+ centre_vertically(adjusted_mode, mode->vdisplay);
+ border = LVDS_BORDER_ENABLE;
+ break;
+ case DRM_MODE_SCALE_ASPECT:
+ /* Scale but preserve the aspect ratio */
+ if (INTEL_INFO(dev)->gen >= 4) {
+ u32 scaled_width = adjusted_mode->hdisplay *
+ mode->vdisplay;
+ u32 scaled_height = mode->hdisplay *
+ adjusted_mode->vdisplay;
+
+ /* 965+ is easy, it does everything in hw */
+ if (scaled_width > scaled_height)
+ pfit_control |= PFIT_ENABLE |
+ PFIT_SCALING_PILLAR;
+ else if (scaled_width < scaled_height)
+ pfit_control |= PFIT_ENABLE |
+ PFIT_SCALING_LETTER;
+ else if (adjusted_mode->hdisplay != mode->hdisplay)
+ pfit_control |= PFIT_ENABLE | PFIT_SCALING_AUTO;
+ } else {
+ u32 scaled_width = adjusted_mode->hdisplay *
+ mode->vdisplay;
+ u32 scaled_height = mode->hdisplay *
+ adjusted_mode->vdisplay;
+ /*
+ * For earlier chips we have to calculate the scaling
+ * ratio by hand and program it into the
+ * PFIT_PGM_RATIO register
+ */
+ if (scaled_width > scaled_height) { /* pillar */
+ centre_horizontally(adjusted_mode,
+ scaled_height /
+ mode->vdisplay);
+
+ border = LVDS_BORDER_ENABLE;
+ if (mode->vdisplay != adjusted_mode->vdisplay) {
+ u32 bits = panel_fitter_scaling(mode->vdisplay, adjusted_mode->vdisplay);
+ pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
+ bits << PFIT_VERT_SCALE_SHIFT);
+ pfit_control |= (PFIT_ENABLE |
+ VERT_INTERP_BILINEAR |
+ HORIZ_INTERP_BILINEAR);
+ }
+ } else if (scaled_width < scaled_height) { /* letter */
+ centre_vertically(adjusted_mode,
+ scaled_width /
+ mode->hdisplay);
+
+ border = LVDS_BORDER_ENABLE;
+ if (mode->hdisplay != adjusted_mode->hdisplay) {
+ u32 bits = panel_fitter_scaling(mode->hdisplay, adjusted_mode->hdisplay);
+ pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
+ bits << PFIT_VERT_SCALE_SHIFT);
+ pfit_control |= (PFIT_ENABLE |
+ VERT_INTERP_BILINEAR |
+ HORIZ_INTERP_BILINEAR);
+ }
+ } else {
+ /* Aspects match, Let hw scale both directions */
+ pfit_control |= (PFIT_ENABLE |
+ VERT_AUTO_SCALE | HORIZ_AUTO_SCALE |
+ VERT_INTERP_BILINEAR |
+ HORIZ_INTERP_BILINEAR);
+ }
+ }
+ break;
+ default:
+ case DRM_MODE_SCALE_FULLSCREEN:
+ /*
+ * Full scaling, even if it changes the aspect ratio.
+ * Fortunately this is all done for us in hw.
+ */
+ if (mode->vdisplay != adjusted_mode->vdisplay ||
+ mode->hdisplay != adjusted_mode->hdisplay) {
+ pfit_control |= PFIT_ENABLE;
+ if (INTEL_INFO(dev)->gen >= 4)
+ pfit_control |= PFIT_SCALING_AUTO;
+ else
+ pfit_control |= (VERT_AUTO_SCALE |
+ VERT_INTERP_BILINEAR |
+ HORIZ_AUTO_SCALE |
+ HORIZ_INTERP_BILINEAR);
+ }
+ break;
+ }
+
+ /* 965+ wants fuzzy fitting */
+ /* FIXME: handle multiple panels by failing gracefully */
+ if (INTEL_INFO(dev)->gen >= 4)
+ pfit_control |= ((intel_crtc->pipe << PFIT_PIPE_SHIFT) |
+ PFIT_FILTER_FUZZY);
+
+out:
+ if ((pfit_control & PFIT_ENABLE) == 0) {
+ pfit_control = 0;
+ pfit_pgm_ratios = 0;
+ }
+
+ /* Make sure pre-965 set dither correctly for 18bpp panels. */
+ if (INTEL_INFO(dev)->gen < 4 && pipe_config->pipe_bpp == 18)
+ pfit_control |= PANEL_8TO6_DITHER_ENABLE;
+
+ if (pfit_control != pipe_config->pfit_control ||
+ pfit_pgm_ratios != pipe_config->pfit_pgm_ratios) {
+ pipe_config->pfit_control = pfit_control;
+ pipe_config->pfit_pgm_ratios = pfit_pgm_ratios;
+ }
+ dev_priv->lvds_border_bits = border;
+}
+
static int is_backlight_combination_mode(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
projects / linux-beck.git / commitdiff