--- /dev/null
+/*
+ * pcc-cpufreq.txt - PCC interface documentation
+ *
+ * Copyright (C) 2009 Red Hat, Matthew Garrett <mjg@redhat.com>
+ * Copyright (C) 2009 Hewlett-Packard Development Company, L.P.
+ * Nagananda Chumbalkar <nagananda.chumbalkar@hp.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or NON
+ * INFRINGEMENT. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+
+ Processor Clocking Control Driver
+ ---------------------------------
+
+Contents:
+---------
+1. Introduction
+1.1 PCC interface
+1.1.1 Get Average Frequency
+1.1.2 Set Desired Frequency
+1.2 Platforms affected
+2. Driver and /sys details
+2.1 scaling_available_frequencies
+2.2 cpuinfo_transition_latency
+2.3 cpuinfo_cur_freq
+2.4 related_cpus
+3. Caveats
+
+1. Introduction:
+----------------
+Processor Clocking Control (PCC) is an interface between the platform
+firmware and OSPM. It is a mechanism for coordinating processor
+performance (ie: frequency) between the platform firmware and the OS.
+
+The PCC driver (pcc-cpufreq) allows OSPM to take advantage of the PCC
+interface.
+
+OS utilizes the PCC interface to inform platform firmware what frequency the
+OS wants for a logical processor. The platform firmware attempts to achieve
+the requested frequency. If the request for the target frequency could not be
+satisfied by platform firmware, then it usually means that power budget
+conditions are in place, and "power capping" is taking place.
+
+1.1 PCC interface:
+------------------
+The complete PCC specification is available here:
+http://www.acpica.org/download/Processor-Clocking-Control-v1p0.pdf
+
+PCC relies on a shared memory region that provides a channel for communication
+between the OS and platform firmware. PCC also implements a "doorbell" that
+is used by the OS to inform the platform firmware that a command has been
+sent.
+
+The ACPI PCCH() method is used to discover the location of the PCC shared
+memory region. The shared memory region header contains the "command" and
+"status" interface. PCCH() also contains details on how to access the platform
+doorbell.
+
+The following commands are supported by the PCC interface:
+* Get Average Frequency
+* Set Desired Frequency
+
+The ACPI PCCP() method is implemented for each logical processor and is
+used to discover the offsets for the input and output buffers in the shared
+memory region.
+
+When PCC mode is enabled, the platform will not expose processor performance
+or throttle states (_PSS, _TSS and related ACPI objects) to OSPM. Therefore,
+the native P-state driver (such as acpi-cpufreq for Intel, powernow-k8 for
+AMD) will not load.
+
+However, OSPM remains in control of policy. The governor (eg: "ondemand")
+computes the required performance for each processor based on server workload.
+The PCC driver fills in the command interface, and the input buffer and
+communicates the request to the platform firmware. The platform firmware is
+responsible for delivering the requested performance.
+
+Each PCC command is "global" in scope and can affect all the logical CPUs in
+the system. Therefore, PCC is capable of performing "group" updates. With PCC
+the OS is capable of getting/setting the frequency of all the logical CPUs in
+the system with a single call to the BIOS.
+
+1.1.1 Get Average Frequency:
+----------------------------
+This command is used by the OSPM to query the running frequency of the
+processor since the last time this command was completed. The output buffer
+indicates the average unhalted frequency of the logical processor expressed as
+a percentage of the nominal (ie: maximum) CPU frequency. The output buffer
+also signifies if the CPU frequency is limited by a power budget condition.
+
+1.1.2 Set Desired Frequency:
+----------------------------
+This command is used by the OSPM to communicate to the platform firmware the
+desired frequency for a logical processor. The output buffer is currently
+ignored by OSPM. The next invocation of "Get Average Frequency" will inform
+OSPM if the desired frequency was achieved or not.
+
+1.2 Platforms affected:
+-----------------------
+The PCC driver will load on any system where the platform firmware:
+* supports the PCC interface, and the associated PCCH() and PCCP() methods
+* assumes responsibility for managing the hardware clocking controls in order
+to deliver the requested processor performance
+
+Currently, certain HP ProLiant platforms implement the PCC interface. On those
+platforms PCC is the "default" choice.
+
+However, it is possible to disable this interface via a BIOS setting. In
+such an instance, as is also the case on platforms where the PCC interface
+is not implemented, the PCC driver will fail to load silently.
+
+2. Driver and /sys details:
+---------------------------
+When the driver loads, it merely prints the lowest and the highest CPU
+frequencies supported by the platform firmware.
+
+The PCC driver loads with a message such as:
+pcc-cpufreq: (v1.00.00) driver loaded with frequency limits: 1600 MHz, 2933
+MHz
+
+This means that the OPSM can request the CPU to run at any frequency in
+between the limits (1600 MHz, and 2933 MHz) specified in the message.
+
+Internally, there is no need for the driver to convert the "target" frequency
+to a corresponding P-state.
+
+The VERSION number for the driver will be of the format v.xy.ab.
+eg: 1.00.02
+ ----- --
+ | |
+ | -- this will increase with bug fixes/enhancements to the driver
+ |-- this is the version of the PCC specification the driver adheres to
+
+
+The following is a brief discussion on some of the fields exported via the
+/sys filesystem and how their values are affected by the PCC driver:
+
+2.1 scaling_available_frequencies:
+----------------------------------
+scaling_available_frequencies is not created in /sys. No intermediate
+frequencies need to be listed because the BIOS will try to achieve any
+frequency, within limits, requested by the governor. A frequency does not have
+to be strictly associated with a P-state.
+
+2.2 cpuinfo_transition_latency:
+-------------------------------
+The cpuinfo_transition_latency field is 0. The PCC specification does
+not include a field to expose this value currently.
+
+2.3 cpuinfo_cur_freq:
+---------------------
+A) Often cpuinfo_cur_freq will show a value different than what is declared
+in the scaling_available_frequencies or scaling_cur_freq, or scaling_max_freq.
+This is due to "turbo boost" available on recent Intel processors. If certain
+conditions are met the BIOS can achieve a slightly higher speed than requested
+by OSPM. An example:
+
+scaling_cur_freq : 2933000
+cpuinfo_cur_freq : 3196000
+
+B) There is a round-off error associated with the cpuinfo_cur_freq value.
+Since the driver obtains the current frequency as a "percentage" (%) of the
+nominal frequency from the BIOS, sometimes, the values displayed by
+scaling_cur_freq and cpuinfo_cur_freq may not match. An example:
+
+scaling_cur_freq : 1600000
+cpuinfo_cur_freq : 1583000
+
+In this example, the nominal frequency is 2933 MHz. The driver obtains the
+current frequency, cpuinfo_cur_freq, as 54% of the nominal frequency:
+
+ 54% of 2933 MHz = 1583 MHz
+
+Nominal frequency is the maximum frequency of the processor, and it usually
+corresponds to the frequency of the P0 P-state.
+
+2.4 related_cpus:
+-----------------
+The related_cpus field is identical to affected_cpus.
+
+affected_cpus : 4
+related_cpus : 4
+
+Currently, the PCC driver does not evaluate _PSD. The platforms that support
+PCC do not implement SW_ALL. So OSPM doesn't need to perform any coordination
+to ensure that the same frequency is requested of all dependent CPUs.
+
+3. Caveats:
+-----------
+The "cpufreq_stats" module in its present form cannot be loaded and
+expected to work with the PCC driver. Since the "cpufreq_stats" module
+provides information wrt each P-state, it is not applicable to the PCC driver.
RPM_SUSPENDED, which means that each device is initially regarded by the
PM core as 'suspended', regardless of its real hardware status
+ unsigned int runtime_auto;
+ - if set, indicates that the user space has allowed the device driver to
+ power manage the device at run time via the /sys/devices/.../power/control
+ interface; it may only be modified with the help of the pm_runtime_allow()
+ and pm_runtime_forbid() helper functions
+
All of the above fields are members of the 'power' member of 'struct device'.
4. Run-time PM Device Helper Functions
'power.runtime_error' is set or 'power.disable_depth' is greater than
zero)
+ bool pm_runtime_suspended(struct device *dev);
+ - return true if the device's runtime PM status is 'suspended', or false
+ otherwise
+
+ void pm_runtime_allow(struct device *dev);
+ - set the power.runtime_auto flag for the device and decrease its usage
+ counter (used by the /sys/devices/.../power/control interface to
+ effectively allow the device to be power managed at run time)
+
+ void pm_runtime_forbid(struct device *dev);
+ - unset the power.runtime_auto flag for the device and increase its usage
+ counter (used by the /sys/devices/.../power/control interface to
+ effectively prevent the device from being power managed at run time)
+
It is safe to execute the following helper functions from interrupt context:
pm_request_idle()
finished, so the PM core uses pm_runtime_idle_sync() to invoke the
subsystem-level idle callback for the device at that time.
+The user space can effectively disallow the driver of the device to power manage
+it at run time by changing the value of its /sys/devices/.../power/control
+attribute to "on", which causes pm_runtime_forbid() to be called. In principle,
+this mechanism may also be used by the driver to effectively turn off the
+run-time power management of the device until the user space turns it on.
+Namely, during the initialization the driver can make sure that the run-time PM
+status of the device is 'active' and call pm_runtime_forbid(). It should be
+noted, however, that if the user space has already intentionally changed the
+value of /sys/devices/.../power/control to "auto" to allow the driver to power
+manage the device at run time, the driver may confuse it by using
+pm_runtime_forbid() this way.
+
6. Run-time PM and System Sleep
Run-time PM and system sleep (i.e., system suspend and hibernation, also known
->prepare() callback and decrements it after calling the ->complete() callback.
Hence disabling run-time PM temporarily like this will not cause any run-time
suspend callbacks to be lost.
+
+7. Generic subsystem callbacks
+
+Subsystems may wish to conserve code space by using the set of generic power
+management callbacks provided by the PM core, defined in
+driver/base/power/generic_ops.c:
+
+ int pm_generic_runtime_idle(struct device *dev);
+ - invoke the ->runtime_idle() callback provided by the driver of this
+ device, if defined, and call pm_runtime_suspend() for this device if the
+ return value is 0 or the callback is not defined
+
+ int pm_generic_runtime_suspend(struct device *dev);
+ - invoke the ->runtime_suspend() callback provided by the driver of this
+ device and return its result, or return -EINVAL if not defined
+
+ int pm_generic_runtime_resume(struct device *dev);
+ - invoke the ->runtime_resume() callback provided by the driver of this
+ device and return its result, or return -EINVAL if not defined
+
+ int pm_generic_suspend(struct device *dev);
+ - if the device has not been suspended at run time, invoke the ->suspend()
+ callback provided by its driver and return its result, or return 0 if not
+ defined
+
+ int pm_generic_resume(struct device *dev);
+ - invoke the ->resume() callback provided by the driver of this device and,
+ if successful, change the device's runtime PM status to 'active'
+
+ int pm_generic_freeze(struct device *dev);
+ - if the device has not been suspended at run time, invoke the ->freeze()
+ callback provided by its driver and return its result, or return 0 if not
+ defined
+
+ int pm_generic_thaw(struct device *dev);
+ - if the device has not been suspended at run time, invoke the ->thaw()
+ callback provided by its driver and return its result, or return 0 if not
+ defined
+
+ int pm_generic_poweroff(struct device *dev);
+ - if the device has not been suspended at run time, invoke the ->poweroff()
+ callback provided by its driver and return its result, or return 0 if not
+ defined
+
+ int pm_generic_restore(struct device *dev);
+ - invoke the ->restore() callback provided by the driver of this device and,
+ if successful, change the device's runtime PM status to 'active'
+
+These functions can be assigned to the ->runtime_idle(), ->runtime_suspend(),
+->runtime_resume(), ->suspend(), ->resume(), ->freeze(), ->thaw(), ->poweroff(),
+or ->restore() callback pointers in the subsystem-level dev_pm_ops structures.
+
+If a subsystem wishes to use all of them at the same time, it can simply assign
+the GENERIC_SUBSYS_PM_OPS macro, defined in include/linux/pm.h, to its
+dev_pm_ops structure pointer.
+
+Device drivers that wish to use the same function as a system suspend, freeze,
+poweroff and run-time suspend callback, and similarly for system resume, thaw,
+restore, and run-time resume, can achieve this with the help of the
+UNIVERSAL_DEV_PM_OPS macro defined in include/linux/pm.h (possibly setting its
+last argument to NULL).
comment "CPUFreq processor drivers"
+config X86_PCC_CPUFREQ
+ tristate "Processor Clocking Control interface driver"
+ depends on ACPI && ACPI_PROCESSOR
+ help
+ This driver adds support for the PCC interface.
+
+ For details, take a look at:
+ <file:Documentation/cpu-freq/pcc-cpufreq.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pcc-cpufreq.
+
+ If in doubt, say N.
+
config X86_ACPI_CPUFREQ
tristate "ACPI Processor P-States driver"
select CPU_FREQ_TABLE
obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o
obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o
+obj-$(CONFIG_X86_PCC_CPUFREQ) += pcc-cpufreq.o
obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o
obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o
obj-$(CONFIG_X86_LONGHAUL) += longhaul.o
--- /dev/null
+/*
+ * pcc-cpufreq.c - Processor Clocking Control firmware cpufreq interface
+ *
+ * Copyright (C) 2009 Red Hat, Matthew Garrett <mjg@redhat.com>
+ * Copyright (C) 2009 Hewlett-Packard Development Company, L.P.
+ * Nagananda Chumbalkar <nagananda.chumbalkar@hp.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or NON
+ * INFRINGEMENT. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/sched.h>
+#include <linux/cpufreq.h>
+#include <linux/compiler.h>
+
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+
+#include <acpi/processor.h>
+
+#define PCC_VERSION "1.00.00"
+#define POLL_LOOPS 300
+
+#define CMD_COMPLETE 0x1
+#define CMD_GET_FREQ 0x0
+#define CMD_SET_FREQ 0x1
+
+#define BUF_SZ 4
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+ "pcc-cpufreq", msg)
+
+struct pcc_register_resource {
+ u8 descriptor;
+ u16 length;
+ u8 space_id;
+ u8 bit_width;
+ u8 bit_offset;
+ u8 access_size;
+ u64 address;
+} __attribute__ ((packed));
+
+struct pcc_memory_resource {
+ u8 descriptor;
+ u16 length;
+ u8 space_id;
+ u8 resource_usage;
+ u8 type_specific;
+ u64 granularity;
+ u64 minimum;
+ u64 maximum;
+ u64 translation_offset;
+ u64 address_length;
+} __attribute__ ((packed));
+
+static struct cpufreq_driver pcc_cpufreq_driver;
+
+struct pcc_header {
+ u32 signature;
+ u16 length;
+ u8 major;
+ u8 minor;
+ u32 features;
+ u16 command;
+ u16 status;
+ u32 latency;
+ u32 minimum_time;
+ u32 maximum_time;
+ u32 nominal;
+ u32 throttled_frequency;
+ u32 minimum_frequency;
+};
+
+static void __iomem *pcch_virt_addr;
+static struct pcc_header __iomem *pcch_hdr;
+
+static DEFINE_SPINLOCK(pcc_lock);
+
+static struct acpi_generic_address doorbell;
+
+static u64 doorbell_preserve;
+static u64 doorbell_write;
+
+static u8 OSC_UUID[16] = {0x63, 0x9B, 0x2C, 0x9F, 0x70, 0x91, 0x49, 0x1f,
+ 0xBB, 0x4F, 0xA5, 0x98, 0x2F, 0xA1, 0xB5, 0x46};
+
+struct pcc_cpu {
+ u32 input_offset;
+ u32 output_offset;
+};
+
+static struct pcc_cpu *pcc_cpu_info;
+
+static int pcc_cpufreq_verify(struct cpufreq_policy *policy)
+{
+ cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+ policy->cpuinfo.max_freq);
+ return 0;
+}
+
+static inline void pcc_cmd(void)
+{
+ u64 doorbell_value;
+ int i;
+
+ acpi_read(&doorbell_value, &doorbell);
+ acpi_write((doorbell_value & doorbell_preserve) | doorbell_write,
+ &doorbell);
+
+ for (i = 0; i < POLL_LOOPS; i++) {
+ if (ioread16(&pcch_hdr->status) & CMD_COMPLETE)
+ break;
+ }
+}
+
+static inline void pcc_clear_mapping(void)
+{
+ if (pcch_virt_addr)
+ iounmap(pcch_virt_addr);
+ pcch_virt_addr = NULL;
+}
+
+static unsigned int pcc_get_freq(unsigned int cpu)
+{
+ struct pcc_cpu *pcc_cpu_data;
+ unsigned int curr_freq;
+ unsigned int freq_limit;
+ u16 status;
+ u32 input_buffer;
+ u32 output_buffer;
+
+ spin_lock(&pcc_lock);
+
+ dprintk("get: get_freq for CPU %d\n", cpu);
+ pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu);
+
+ input_buffer = 0x1;
+ iowrite32(input_buffer,
+ (pcch_virt_addr + pcc_cpu_data->input_offset));
+ iowrite16(CMD_GET_FREQ, &pcch_hdr->command);
+
+ pcc_cmd();
+
+ output_buffer =
+ ioread32(pcch_virt_addr + pcc_cpu_data->output_offset);
+
+ /* Clear the input buffer - we are done with the current command */
+ memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ);
+
+ status = ioread16(&pcch_hdr->status);
+ if (status != CMD_COMPLETE) {
+ dprintk("get: FAILED: for CPU %d, status is %d\n",
+ cpu, status);
+ goto cmd_incomplete;
+ }
+ iowrite16(0, &pcch_hdr->status);
+ curr_freq = (((ioread32(&pcch_hdr->nominal) * (output_buffer & 0xff))
+ / 100) * 1000);
+
+ dprintk("get: SUCCESS: (virtual) output_offset for cpu %d is "
+ "0x%x, contains a value of: 0x%x. Speed is: %d MHz\n",
+ cpu, (pcch_virt_addr + pcc_cpu_data->output_offset),
+ output_buffer, curr_freq);
+
+ freq_limit = (output_buffer >> 8) & 0xff;
+ if (freq_limit != 0xff) {
+ dprintk("get: frequency for cpu %d is being temporarily"
+ " capped at %d\n", cpu, curr_freq);
+ }
+
+ spin_unlock(&pcc_lock);
+ return curr_freq;
+
+cmd_incomplete:
+ iowrite16(0, &pcch_hdr->status);
+ spin_unlock(&pcc_lock);
+ return -EINVAL;
+}
+
+static int pcc_cpufreq_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ struct pcc_cpu *pcc_cpu_data;
+ struct cpufreq_freqs freqs;
+ u16 status;
+ u32 input_buffer;
+ int cpu;
+
+ spin_lock(&pcc_lock);
+ cpu = policy->cpu;
+ pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu);
+
+ dprintk("target: CPU %d should go to target freq: %d "
+ "(virtual) input_offset is 0x%x\n",
+ cpu, target_freq,
+ (pcch_virt_addr + pcc_cpu_data->input_offset));
+
+ freqs.new = target_freq;
+ freqs.cpu = cpu;
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ input_buffer = 0x1 | (((target_freq * 100)
+ / (ioread32(&pcch_hdr->nominal) * 1000)) << 8);
+ iowrite32(input_buffer,
+ (pcch_virt_addr + pcc_cpu_data->input_offset));
+ iowrite16(CMD_SET_FREQ, &pcch_hdr->command);
+
+ pcc_cmd();
+
+ /* Clear the input buffer - we are done with the current command */
+ memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ);
+
+ status = ioread16(&pcch_hdr->status);
+ if (status != CMD_COMPLETE) {
+ dprintk("target: FAILED for cpu %d, with status: 0x%x\n",
+ cpu, status);
+ goto cmd_incomplete;
+ }
+ iowrite16(0, &pcch_hdr->status);
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ dprintk("target: was SUCCESSFUL for cpu %d\n", cpu);
+ spin_unlock(&pcc_lock);
+
+ return 0;
+
+cmd_incomplete:
+ iowrite16(0, &pcch_hdr->status);
+ spin_unlock(&pcc_lock);
+ return -EINVAL;
+}
+
+static int pcc_get_offset(int cpu)
+{
+ acpi_status status;
+ struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+ union acpi_object *pccp, *offset;
+ struct pcc_cpu *pcc_cpu_data;
+ struct acpi_processor *pr;
+ int ret = 0;
+
+ pr = per_cpu(processors, cpu);
+ pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu);
+
+ status = acpi_evaluate_object(pr->handle, "PCCP", NULL, &buffer);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ pccp = buffer.pointer;
+ if (!pccp || pccp->type != ACPI_TYPE_PACKAGE) {
+ ret = -ENODEV;
+ goto out_free;
+ };
+
+ offset = &(pccp->package.elements[0]);
+ if (!offset || offset->type != ACPI_TYPE_INTEGER) {
+ ret = -ENODEV;
+ goto out_free;
+ }
+
+ pcc_cpu_data->input_offset = offset->integer.value;
+
+ offset = &(pccp->package.elements[1]);
+ if (!offset || offset->type != ACPI_TYPE_INTEGER) {
+ ret = -ENODEV;
+ goto out_free;
+ }
+
+ pcc_cpu_data->output_offset = offset->integer.value;
+
+ memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ);
+ memset_io((pcch_virt_addr + pcc_cpu_data->output_offset), 0, BUF_SZ);
+
+ dprintk("pcc_get_offset: for CPU %d: pcc_cpu_data "
+ "input_offset: 0x%x, pcc_cpu_data output_offset: 0x%x\n",
+ cpu, pcc_cpu_data->input_offset, pcc_cpu_data->output_offset);
+out_free:
+ kfree(buffer.pointer);
+ return ret;
+}
+
+static int __init pcc_cpufreq_do_osc(acpi_handle *handle)
+{
+ acpi_status status;
+ struct acpi_object_list input;
+ struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
+ union acpi_object in_params[4];
+ union acpi_object *out_obj;
+ u32 capabilities[2];
+ u32 errors;
+ u32 supported;
+ int ret = 0;
+
+ input.count = 4;
+ input.pointer = in_params;
+ input.count = 4;
+ input.pointer = in_params;
+ in_params[0].type = ACPI_TYPE_BUFFER;
+ in_params[0].buffer.length = 16;
+ in_params[0].buffer.pointer = OSC_UUID;
+ in_params[1].type = ACPI_TYPE_INTEGER;
+ in_params[1].integer.value = 1;
+ in_params[2].type = ACPI_TYPE_INTEGER;
+ in_params[2].integer.value = 2;
+ in_params[3].type = ACPI_TYPE_BUFFER;
+ in_params[3].buffer.length = 8;
+ in_params[3].buffer.pointer = (u8 *)&capabilities;
+
+ capabilities[0] = OSC_QUERY_ENABLE;
+ capabilities[1] = 0x1;
+
+ status = acpi_evaluate_object(*handle, "_OSC", &input, &output);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ if (!output.length)
+ return -ENODEV;
+
+ out_obj = output.pointer;
+ if (out_obj->type != ACPI_TYPE_BUFFER) {
+ ret = -ENODEV;
+ goto out_free;
+ }
+
+ errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0);
+ if (errors) {
+ ret = -ENODEV;
+ goto out_free;
+ }
+
+ supported = *((u32 *)(out_obj->buffer.pointer + 4));
+ if (!(supported & 0x1)) {
+ ret = -ENODEV;
+ goto out_free;
+ }
+
+ kfree(output.pointer);
+ capabilities[0] = 0x0;
+ capabilities[1] = 0x1;
+
+ status = acpi_evaluate_object(*handle, "_OSC", &input, &output);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ if (!output.length)
+ return -ENODEV;
+
+ out_obj = output.pointer;
+ if (out_obj->type != ACPI_TYPE_BUFFER) {
+ ret = -ENODEV;
+ goto out_free;
+ }
+
+ errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0);
+ if (errors) {
+ ret = -ENODEV;
+ goto out_free;
+ }
+
+ supported = *((u32 *)(out_obj->buffer.pointer + 4));
+ if (!(supported & 0x1)) {
+ ret = -ENODEV;
+ goto out_free;
+ }
+
+out_free:
+ kfree(output.pointer);
+ return ret;
+}
+
+static int __init pcc_cpufreq_probe(void)
+{
+ acpi_status status;
+ struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
+ struct pcc_memory_resource *mem_resource;
+ struct pcc_register_resource *reg_resource;
+ union acpi_object *out_obj, *member;
+ acpi_handle handle, osc_handle;
+ int ret = 0;
+
+ status = acpi_get_handle(NULL, "\\_SB", &handle);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ status = acpi_get_handle(handle, "_OSC", &osc_handle);
+ if (ACPI_SUCCESS(status)) {
+ ret = pcc_cpufreq_do_osc(&osc_handle);
+ if (ret)
+ dprintk("probe: _OSC evaluation did not succeed\n");
+ /* Firmware's use of _OSC is optional */
+ ret = 0;
+ }
+
+ status = acpi_evaluate_object(handle, "PCCH", NULL, &output);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ out_obj = output.pointer;
+ if (out_obj->type != ACPI_TYPE_PACKAGE) {
+ ret = -ENODEV;
+ goto out_free;
+ }
+
+ member = &out_obj->package.elements[0];
+ if (member->type != ACPI_TYPE_BUFFER) {
+ ret = -ENODEV;
+ goto out_free;
+ }
+
+ mem_resource = (struct pcc_memory_resource *)member->buffer.pointer;
+
+ dprintk("probe: mem_resource descriptor: 0x%x,"
+ " length: %d, space_id: %d, resource_usage: %d,"
+ " type_specific: %d, granularity: 0x%llx,"
+ " minimum: 0x%llx, maximum: 0x%llx,"
+ " translation_offset: 0x%llx, address_length: 0x%llx\n",
+ mem_resource->descriptor, mem_resource->length,
+ mem_resource->space_id, mem_resource->resource_usage,
+ mem_resource->type_specific, mem_resource->granularity,
+ mem_resource->minimum, mem_resource->maximum,
+ mem_resource->translation_offset,
+ mem_resource->address_length);
+
+ if (mem_resource->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) {
+ ret = -ENODEV;
+ goto out_free;
+ }
+
+ pcch_virt_addr = ioremap_nocache(mem_resource->minimum,
+ mem_resource->address_length);
+ if (pcch_virt_addr == NULL) {
+ dprintk("probe: could not map shared mem region\n");
+ goto out_free;
+ }
+ pcch_hdr = pcch_virt_addr;
+
+ dprintk("probe: PCCH header (virtual) addr: 0x%p\n", pcch_hdr);
+ dprintk("probe: PCCH header is at physical address: 0x%llx,"
+ " signature: 0x%x, length: %d bytes, major: %d, minor: %d,"
+ " supported features: 0x%x, command field: 0x%x,"
+ " status field: 0x%x, nominal latency: %d us\n",
+ mem_resource->minimum, ioread32(&pcch_hdr->signature),
+ ioread16(&pcch_hdr->length), ioread8(&pcch_hdr->major),
+ ioread8(&pcch_hdr->minor), ioread32(&pcch_hdr->features),
+ ioread16(&pcch_hdr->command), ioread16(&pcch_hdr->status),
+ ioread32(&pcch_hdr->latency));
+
+ dprintk("probe: min time between commands: %d us,"
+ " max time between commands: %d us,"
+ " nominal CPU frequency: %d MHz,"
+ " minimum CPU frequency: %d MHz,"
+ " minimum CPU frequency without throttling: %d MHz\n",
+ ioread32(&pcch_hdr->minimum_time),
+ ioread32(&pcch_hdr->maximum_time),
+ ioread32(&pcch_hdr->nominal),
+ ioread32(&pcch_hdr->throttled_frequency),
+ ioread32(&pcch_hdr->minimum_frequency));
+
+ member = &out_obj->package.elements[1];
+ if (member->type != ACPI_TYPE_BUFFER) {
+ ret = -ENODEV;
+ goto pcch_free;
+ }
+
+ reg_resource = (struct pcc_register_resource *)member->buffer.pointer;
+
+ doorbell.space_id = reg_resource->space_id;
+ doorbell.bit_width = reg_resource->bit_width;
+ doorbell.bit_offset = reg_resource->bit_offset;
+ doorbell.access_width = 64;
+ doorbell.address = reg_resource->address;
+
+ dprintk("probe: doorbell: space_id is %d, bit_width is %d, "
+ "bit_offset is %d, access_width is %d, address is 0x%llx\n",
+ doorbell.space_id, doorbell.bit_width, doorbell.bit_offset,
+ doorbell.access_width, reg_resource->address);
+
+ member = &out_obj->package.elements[2];
+ if (member->type != ACPI_TYPE_INTEGER) {
+ ret = -ENODEV;
+ goto pcch_free;
+ }
+
+ doorbell_preserve = member->integer.value;
+
+ member = &out_obj->package.elements[3];
+ if (member->type != ACPI_TYPE_INTEGER) {
+ ret = -ENODEV;
+ goto pcch_free;
+ }
+
+ doorbell_write = member->integer.value;
+
+ dprintk("probe: doorbell_preserve: 0x%llx,"
+ " doorbell_write: 0x%llx\n",
+ doorbell_preserve, doorbell_write);
+
+ pcc_cpu_info = alloc_percpu(struct pcc_cpu);
+ if (!pcc_cpu_info) {
+ ret = -ENOMEM;
+ goto pcch_free;
+ }
+
+ printk(KERN_DEBUG "pcc-cpufreq: (v%s) driver loaded with frequency"
+ " limits: %d MHz, %d MHz\n", PCC_VERSION,
+ ioread32(&pcch_hdr->minimum_frequency),
+ ioread32(&pcch_hdr->nominal));
+ kfree(output.pointer);
+ return ret;
+pcch_free:
+ pcc_clear_mapping();
+out_free:
+ kfree(output.pointer);
+ return ret;
+}
+
+static int pcc_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+ unsigned int cpu = policy->cpu;
+ unsigned int result = 0;
+
+ if (!pcch_virt_addr) {
+ result = -1;
+ goto pcch_null;
+ }
+
+ result = pcc_get_offset(cpu);
+ if (result) {
+ dprintk("init: PCCP evaluation failed\n");
+ goto free;
+ }
+
+ policy->max = policy->cpuinfo.max_freq =
+ ioread32(&pcch_hdr->nominal) * 1000;
+ policy->min = policy->cpuinfo.min_freq =
+ ioread32(&pcch_hdr->minimum_frequency) * 1000;
+ policy->cur = pcc_get_freq(cpu);
+
+ dprintk("init: policy->max is %d, policy->min is %d\n",
+ policy->max, policy->min);
+
+ return 0;
+free:
+ pcc_clear_mapping();
+ free_percpu(pcc_cpu_info);
+pcch_null:
+ return result;
+}
+
+static int pcc_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+ return 0;
+}
+
+static struct cpufreq_driver pcc_cpufreq_driver = {
+ .flags = CPUFREQ_CONST_LOOPS,
+ .get = pcc_get_freq,
+ .verify = pcc_cpufreq_verify,
+ .target = pcc_cpufreq_target,
+ .init = pcc_cpufreq_cpu_init,
+ .exit = pcc_cpufreq_cpu_exit,
+ .name = "pcc-cpufreq",
+ .owner = THIS_MODULE,
+};
+
+static int __init pcc_cpufreq_init(void)
+{
+ int ret;
+
+ if (acpi_disabled)
+ return 0;
+
+ ret = pcc_cpufreq_probe();
+ if (ret) {
+ dprintk("pcc_cpufreq_init: PCCH evaluation failed\n");
+ return ret;
+ }
+
+ ret = cpufreq_register_driver(&pcc_cpufreq_driver);
+
+ return ret;
+}
+
+static void __exit pcc_cpufreq_exit(void)
+{
+ cpufreq_unregister_driver(&pcc_cpufreq_driver);
+
+ pcc_clear_mapping();
+
+ free_percpu(pcc_cpu_info);
+}
+
+MODULE_AUTHOR("Matthew Garrett, Naga Chumbalkar");
+MODULE_VERSION(PCC_VERSION);
+MODULE_DESCRIPTION("Processor Clocking Control interface driver");
+MODULE_LICENSE("GPL");
+
+late_initcall(pcc_cpufreq_init);
+module_exit(pcc_cpufreq_exit);
#endif
DEFINE_PER_CPU(struct acpi_processor *, processors);
+EXPORT_PER_CPU_SYMBOL(processors);
+
struct acpi_processor_errata errata __read_mostly;
/* --------------------------------------------------------------------------
obj-$(CONFIG_PM) += sysfs.o
obj-$(CONFIG_PM_SLEEP) += main.o
obj-$(CONFIG_PM_RUNTIME) += runtime.o
+obj-$(CONFIG_PM_OPS) += generic_ops.o
obj-$(CONFIG_PM_TRACE_RTC) += trace.o
ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
--- /dev/null
+/*
+ * drivers/base/power/generic_ops.c - Generic PM callbacks for subsystems
+ *
+ * Copyright (c) 2010 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+
+#ifdef CONFIG_PM_RUNTIME
+/**
+ * pm_generic_runtime_idle - Generic runtime idle callback for subsystems.
+ * @dev: Device to handle.
+ *
+ * If PM operations are defined for the @dev's driver and they include
+ * ->runtime_idle(), execute it and return its error code, if nonzero.
+ * Otherwise, execute pm_runtime_suspend() for the device and return 0.
+ */
+int pm_generic_runtime_idle(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+ if (pm && pm->runtime_idle) {
+ int ret = pm->runtime_idle(dev);
+ if (ret)
+ return ret;
+ }
+
+ pm_runtime_suspend(dev);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_runtime_idle);
+
+/**
+ * pm_generic_runtime_suspend - Generic runtime suspend callback for subsystems.
+ * @dev: Device to suspend.
+ *
+ * If PM operations are defined for the @dev's driver and they include
+ * ->runtime_suspend(), execute it and return its error code. Otherwise,
+ * return -EINVAL.
+ */
+int pm_generic_runtime_suspend(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+ int ret;
+
+ ret = pm && pm->runtime_suspend ? pm->runtime_suspend(dev) : -EINVAL;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pm_generic_runtime_suspend);
+
+/**
+ * pm_generic_runtime_resume - Generic runtime resume callback for subsystems.
+ * @dev: Device to resume.
+ *
+ * If PM operations are defined for the @dev's driver and they include
+ * ->runtime_resume(), execute it and return its error code. Otherwise,
+ * return -EINVAL.
+ */
+int pm_generic_runtime_resume(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+ int ret;
+
+ ret = pm && pm->runtime_resume ? pm->runtime_resume(dev) : -EINVAL;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pm_generic_runtime_resume);
+#endif /* CONFIG_PM_RUNTIME */
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * __pm_generic_call - Generic suspend/freeze/poweroff/thaw subsystem callback.
+ * @dev: Device to handle.
+ * @event: PM transition of the system under way.
+ *
+ * If the device has not been suspended at run time, execute the
+ * suspend/freeze/poweroff/thaw callback provided by its driver, if defined, and
+ * return its error code. Otherwise, return zero.
+ */
+static int __pm_generic_call(struct device *dev, int event)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+ int (*callback)(struct device *);
+
+ if (!pm || pm_runtime_suspended(dev))
+ return 0;
+
+ switch (event) {
+ case PM_EVENT_SUSPEND:
+ callback = pm->suspend;
+ break;
+ case PM_EVENT_FREEZE:
+ callback = pm->freeze;
+ break;
+ case PM_EVENT_HIBERNATE:
+ callback = pm->poweroff;
+ break;
+ case PM_EVENT_THAW:
+ callback = pm->thaw;
+ break;
+ default:
+ callback = NULL;
+ break;
+ }
+
+ return callback ? callback(dev) : 0;
+}
+
+/**
+ * pm_generic_suspend - Generic suspend callback for subsystems.
+ * @dev: Device to suspend.
+ */
+int pm_generic_suspend(struct device *dev)
+{
+ return __pm_generic_call(dev, PM_EVENT_SUSPEND);
+}
+EXPORT_SYMBOL_GPL(pm_generic_suspend);
+
+/**
+ * pm_generic_freeze - Generic freeze callback for subsystems.
+ * @dev: Device to freeze.
+ */
+int pm_generic_freeze(struct device *dev)
+{
+ return __pm_generic_call(dev, PM_EVENT_FREEZE);
+}
+EXPORT_SYMBOL_GPL(pm_generic_freeze);
+
+/**
+ * pm_generic_poweroff - Generic poweroff callback for subsystems.
+ * @dev: Device to handle.
+ */
+int pm_generic_poweroff(struct device *dev)
+{
+ return __pm_generic_call(dev, PM_EVENT_HIBERNATE);
+}
+EXPORT_SYMBOL_GPL(pm_generic_poweroff);
+
+/**
+ * pm_generic_thaw - Generic thaw callback for subsystems.
+ * @dev: Device to thaw.
+ */
+int pm_generic_thaw(struct device *dev)
+{
+ return __pm_generic_call(dev, PM_EVENT_THAW);
+}
+EXPORT_SYMBOL_GPL(pm_generic_thaw);
+
+/**
+ * __pm_generic_resume - Generic resume/restore callback for subsystems.
+ * @dev: Device to handle.
+ * @event: PM transition of the system under way.
+ *
+ * Execute the resume/resotre callback provided by the @dev's driver, if
+ * defined. If it returns 0, change the device's runtime PM status to 'active'.
+ * Return the callback's error code.
+ */
+static int __pm_generic_resume(struct device *dev, int event)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+ int (*callback)(struct device *);
+ int ret;
+
+ if (!pm)
+ return 0;
+
+ switch (event) {
+ case PM_EVENT_RESUME:
+ callback = pm->resume;
+ break;
+ case PM_EVENT_RESTORE:
+ callback = pm->restore;
+ break;
+ default:
+ callback = NULL;
+ break;
+ }
+
+ if (!callback)
+ return 0;
+
+ ret = callback(dev);
+ if (!ret) {
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ }
+
+ return ret;
+}
+
+/**
+ * pm_generic_resume - Generic resume callback for subsystems.
+ * @dev: Device to resume.
+ */
+int pm_generic_resume(struct device *dev)
+{
+ return __pm_generic_resume(dev, PM_EVENT_RESUME);
+}
+EXPORT_SYMBOL_GPL(pm_generic_resume);
+
+/**
+ * pm_generic_restore - Generic restore callback for subsystems.
+ * @dev: Device to restore.
+ */
+int pm_generic_restore(struct device *dev)
+{
+ return __pm_generic_resume(dev, PM_EVENT_RESTORE);
+}
+EXPORT_SYMBOL_GPL(pm_generic_restore);
+#endif /* CONFIG_PM_SLEEP */
+
+struct dev_pm_ops generic_subsys_pm_ops = {
+#ifdef CONFIG_PM_SLEEP
+ .suspend = pm_generic_suspend,
+ .resume = pm_generic_resume,
+ .freeze = pm_generic_freeze,
+ .thaw = pm_generic_thaw,
+ .poweroff = pm_generic_poweroff,
+ .restore = pm_generic_restore,
+#endif
+#ifdef CONFIG_PM_RUNTIME
+ .runtime_suspend = pm_generic_runtime_suspend,
+ .runtime_resume = pm_generic_runtime_resume,
+ .runtime_idle = pm_generic_runtime_idle,
+#endif
+};
+EXPORT_SYMBOL_GPL(generic_subsys_pm_ops);
depends on (AGP || AGP=n) && PCI && !EMULATED_CMPXCHG && MMU
select I2C
select I2C_ALGOBIT
- select LIST_SORT
help
Kernel-level support for the Direct Rendering Infrastructure (DRI)
introduced in XFree86 4.0. If you say Y here, you need to select
* However, these will come from functions that return ptrs to each of them.
*/
-static DECLARE_WAIT_QUEUE_HEAD(deviceconndiscwq);
-/* guarded by usbfs_mutex */
-static unsigned int conndiscevcnt;
-
-/* this struct stores the poll state for <mountpoint>/devices pollers */
-struct usb_device_status {
- unsigned int lastev;
+/*
+ * Wait for an connect/disconnect event to happen. We initialize
+ * the event counter with an odd number, and each event will increment
+ * the event counter by two, so it will always _stay_ odd. That means
+ * that it will never be zero, so "event 0" will never match a current
+ * event, and thus 'poll' will always trigger as readable for the first
+ * time it gets called.
+ */
+static struct device_connect_event {
+ atomic_t count;
+ wait_queue_head_t wait;
+} device_event = {
+ .count = ATOMIC_INIT(1),
+ .wait = __WAIT_QUEUE_HEAD_INITIALIZER(device_event.wait)
};
struct class_info {
void usbfs_conn_disc_event(void)
{
- mutex_lock(&usbfs_mutex);
- conndiscevcnt++;
- mutex_unlock(&usbfs_mutex);
- wake_up(&deviceconndiscwq);
+ atomic_add(2, &device_event.count);
+ wake_up(&device_event.wait);
}
static const char *class_decode(const int class)
static unsigned int usb_device_poll(struct file *file,
struct poll_table_struct *wait)
{
- struct usb_device_status *st;
- unsigned int mask = 0;
-
- mutex_lock(&usbfs_mutex);
- st = file->private_data;
- if (!st) {
- st = kmalloc(sizeof(struct usb_device_status), GFP_KERNEL);
- if (!st) {
- mutex_unlock(&usbfs_mutex);
- return POLLIN;
- }
-
- st->lastev = conndiscevcnt;
- file->private_data = st;
- mask = POLLIN;
- }
+ unsigned int event_count;
- if (file->f_mode & FMODE_READ)
- poll_wait(file, &deviceconndiscwq, wait);
- if (st->lastev != conndiscevcnt)
- mask |= POLLIN;
- st->lastev = conndiscevcnt;
- mutex_unlock(&usbfs_mutex);
- return mask;
-}
+ poll_wait(file, &device_event.wait, wait);
-static int usb_device_open(struct inode *inode, struct file *file)
-{
- file->private_data = NULL;
- return 0;
-}
+ event_count = atomic_read(&device_event.count);
+ if (file->f_version != event_count) {
+ file->f_version = event_count;
+ return POLLIN | POLLRDNORM;
+ }
-static int usb_device_release(struct inode *inode, struct file *file)
-{
- kfree(file->private_data);
- file->private_data = NULL;
return 0;
}
.llseek = usb_device_lseek,
.read = usb_device_read,
.poll = usb_device_poll,
- .open = usb_device_open,
- .release = usb_device_release,
};
goto out_req_regions;
pci_set_drvdata(pci_dev, vp_dev);
+ pci_set_master(pci_dev);
/* we use the subsystem vendor/device id as the virtio vendor/device
* id. this allows us to use the same PCI vendor/device id for all
select CRYPTO if UBIFS_FS_ZLIB
select CRYPTO_LZO if UBIFS_FS_LZO
select CRYPTO_DEFLATE if UBIFS_FS_ZLIB
- select LIST_SORT
depends on MTD_UBI
help
UBIFS is a file system for flash devices which works on top of UBI.
int (*runtime_idle)(struct device *dev);
};
+#ifdef CONFIG_PM_SLEEP
+#define SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
+ .suspend = suspend_fn, \
+ .resume = resume_fn, \
+ .freeze = suspend_fn, \
+ .thaw = resume_fn, \
+ .poweroff = suspend_fn, \
+ .restore = resume_fn,
+#else
+#define SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
+#endif
+
+#ifdef CONFIG_PM_RUNTIME
+#define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \
+ .runtime_suspend = suspend_fn, \
+ .runtime_resume = resume_fn, \
+ .runtime_idle = idle_fn,
+#else
+#define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn)
+#endif
+
/*
* Use this if you want to use the same suspend and resume callbacks for suspend
* to RAM and hibernation.
*/
#define SIMPLE_DEV_PM_OPS(name, suspend_fn, resume_fn) \
const struct dev_pm_ops name = { \
- .suspend = suspend_fn, \
- .resume = resume_fn, \
- .freeze = suspend_fn, \
- .thaw = resume_fn, \
- .poweroff = suspend_fn, \
- .restore = resume_fn, \
+ SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
+}
+
+/*
+ * Use this for defining a set of PM operations to be used in all situations
+ * (sustem suspend, hibernation or runtime PM).
+ */
+#define UNIVERSAL_DEV_PM_OPS(name, suspend_fn, resume_fn, idle_fn) \
+const struct dev_pm_ops name = { \
+ SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
+ SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \
}
+/*
+ * Use this for subsystems (bus types, device types, device classes) that don't
+ * need any special suspend/resume handling in addition to invoking the PM
+ * callbacks provided by device drivers supporting both the system sleep PM and
+ * runtime PM, make the pm member point to generic_subsys_pm_ops.
+ */
+#ifdef CONFIG_PM_OPS
+extern struct dev_pm_ops generic_subsys_pm_ops;
+#define GENERIC_SUBSYS_PM_OPS (&generic_subsys_pm_ops)
+#else
+#define GENERIC_SUBSYS_PM_OPS NULL
+#endif
+
/**
* PM_EVENT_ messages
*
dev->power.run_wake = enable;
}
+static inline bool pm_runtime_suspended(struct device *dev)
+{
+ return dev->power.runtime_status == RPM_SUSPENDED;
+}
+
#else /* !CONFIG_PM_RUNTIME */
static inline int pm_runtime_idle(struct device *dev) { return -ENOSYS; }
static inline void pm_runtime_put_noidle(struct device *dev) {}
static inline bool device_run_wake(struct device *dev) { return false; }
static inline void device_set_run_wake(struct device *dev, bool enable) {}
+static inline bool pm_runtime_suspended(struct device *dev) { return false; }
#endif /* !CONFIG_PM_RUNTIME */
config TEXTSEARCH_FSM
tristate
-config LIST_SORT
- boolean
-
config BTREE
boolean
obj-y += bcd.o div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \
bust_spinlocks.o hexdump.o kasprintf.o bitmap.o scatterlist.o \
- string_helpers.o gcd.o
+ string_helpers.o gcd.o list_sort.o
ifeq ($(CONFIG_DEBUG_KOBJECT),y)
CFLAGS_kobject.o += -DDEBUG
lib-$(CONFIG_GENERIC_FIND_NEXT_BIT) += find_next_bit.o
obj-$(CONFIG_GENERIC_FIND_LAST_BIT) += find_last_bit.o
obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o
-obj-$(CONFIG_LIST_SORT) += list_sort.o
obj-$(CONFIG_LOCK_KERNEL) += kernel_lock.o
obj-$(CONFIG_BTREE) += btree.o
obj-$(CONFIG_DEBUG_PREEMPT) += smp_processor_id.o
#define PLUS 4 /* show plus */
#define SPACE 8 /* space if plus */
#define LEFT 16 /* left justified */
-#define SMALL 32 /* Must be 32 == 0x20 */
-#define SPECIAL 64 /* 0x */
+#define SMALL 32 /* use lowercase in hex (must be 32 == 0x20) */
+#define SPECIAL 64 /* prefix hex with "0x", octal with "0" */
enum format_type {
FORMAT_TYPE_NONE, /* Just a string part */
};
struct printf_spec {
- enum format_type type;
- int flags; /* flags to number() */
- int field_width; /* width of output field */
- int base;
- int precision; /* # of digits/chars */
- int qualifier;
+ u16 type;
+ s16 field_width; /* width of output field */
+ u8 flags; /* flags to number() */
+ u8 base;
+ s8 precision; /* # of digits/chars */
+ u8 qualifier;
};
static char *number(char *buf, char *end, unsigned long long num,
#ifndef MEM_RSRC_PRINTK_SIZE
#define MEM_RSRC_PRINTK_SIZE 10
#endif
- struct printf_spec hex_spec = {
+ static const struct printf_spec io_spec = {
.base = 16,
+ .field_width = IO_RSRC_PRINTK_SIZE,
.precision = -1,
.flags = SPECIAL | SMALL | ZEROPAD,
};
- struct printf_spec dec_spec = {
+ static const struct printf_spec mem_spec = {
+ .base = 16,
+ .field_width = MEM_RSRC_PRINTK_SIZE,
+ .precision = -1,
+ .flags = SPECIAL | SMALL | ZEROPAD,
+ };
+ static const struct printf_spec dec_spec = {
.base = 10,
.precision = -1,
.flags = 0,
};
- struct printf_spec str_spec = {
+ static const struct printf_spec str_spec = {
.field_width = -1,
.precision = 10,
.flags = LEFT,
};
- struct printf_spec flag_spec = {
+ static const struct printf_spec flag_spec = {
.base = 16,
.precision = -1,
.flags = SPECIAL | SMALL,
2*RSRC_BUF_SIZE + FLAG_BUF_SIZE + RAW_BUF_SIZE)];
char *p = sym, *pend = sym + sizeof(sym);
- int size = -1, addr = 0;
int decode = (fmt[0] == 'R') ? 1 : 0;
-
- if (res->flags & IORESOURCE_IO) {
- size = IO_RSRC_PRINTK_SIZE;
- addr = 1;
- } else if (res->flags & IORESOURCE_MEM) {
- size = MEM_RSRC_PRINTK_SIZE;
- addr = 1;
- }
+ const struct printf_spec *specp;
*p++ = '[';
- if (res->flags & IORESOURCE_IO)
+ if (res->flags & IORESOURCE_IO) {
p = string(p, pend, "io ", str_spec);
- else if (res->flags & IORESOURCE_MEM)
+ specp = &io_spec;
+ } else if (res->flags & IORESOURCE_MEM) {
p = string(p, pend, "mem ", str_spec);
- else if (res->flags & IORESOURCE_IRQ)
+ specp = &mem_spec;
+ } else if (res->flags & IORESOURCE_IRQ) {
p = string(p, pend, "irq ", str_spec);
- else if (res->flags & IORESOURCE_DMA)
+ specp = &dec_spec;
+ } else if (res->flags & IORESOURCE_DMA) {
p = string(p, pend, "dma ", str_spec);
- else {
+ specp = &dec_spec;
+ } else {
p = string(p, pend, "??? ", str_spec);
+ specp = &mem_spec;
decode = 0;
}
- hex_spec.field_width = size;
- p = number(p, pend, res->start, addr ? hex_spec : dec_spec);
+ p = number(p, pend, res->start, *specp);
if (res->start != res->end) {
*p++ = '-';
- p = number(p, pend, res->end, addr ? hex_spec : dec_spec);
+ p = number(p, pend, res->end, *specp);
}
if (decode) {
if (res->flags & IORESOURCE_MEM_64)
break;
case FORMAT_TYPE_NRCHARS: {
- int qualifier = spec.qualifier;
+ u8 qualifier = spec.qualifier;
if (qualifier == 'l') {
long *ip = va_arg(args, long *);
case FORMAT_TYPE_NRCHARS: {
/* skip %n 's argument */
- int qualifier = spec.qualifier;
+ u8 qualifier = spec.qualifier;
void *skip_arg;
if (qualifier == 'l')
skip_arg = va_arg(args, long *);
char *next;
char digit;
int num = 0;
- int qualifier, base, field_width;
+ u8 qualifier;
+ u8 base;
+ s16 field_width;
bool is_sign;
while (*fmt && *str) {
{
char *s = (char *)va_arg(args, char *);
if (field_width == -1)
- field_width = INT_MAX;
+ field_width = SHORT_MAX;
/* first, skip leading white space in buffer */
str = skip_spaces(str);
projects / linux-beck.git / commitdiff