+++ /dev/null
-static int apci1564_counter_insn_config(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data)
-{
- struct apci1564_private *devpriv = dev->private;
- unsigned int chan = CR_CHAN(insn->chanspec);
- unsigned long iobase = devpriv->counters + APCI1564_COUNTER(chan);
- unsigned int ctrl;
-
- /* Stop The Timer */
- ctrl = inl(iobase + ADDI_TCW_CTRL_REG);
- ctrl &= ~(ADDI_TCW_CTRL_GATE | ADDI_TCW_CTRL_TRIG |
- ADDI_TCW_CTRL_ENA);
- outl(ctrl, iobase + ADDI_TCW_CTRL_REG);
-
- /* Set the reload value */
- outl(data[3], iobase + ADDI_TCW_RELOAD_REG);
-
- /* Set the mode */
- ctrl &= ~(ADDI_TCW_CTRL_EXT_CLK_MASK | ADDI_TCW_CTRL_MODE_MASK |
- ADDI_TCW_CTRL_TIMER_ENA | ADDI_TCW_CTRL_RESET_ENA |
- ADDI_TCW_CTRL_WARN_ENA);
- ctrl |= ADDI_TCW_CTRL_CNTR_ENA | ADDI_TCW_CTRL_MODE(data[4]);
- outl(ctrl, iobase + ADDI_TCW_CTRL_REG);
-
- /* Enable or Disable Interrupt */
- if (data[1])
- ctrl |= ADDI_TCW_CTRL_IRQ_ENA;
- else
- ctrl &= ~ADDI_TCW_CTRL_IRQ_ENA;
- outl(ctrl, iobase + ADDI_TCW_CTRL_REG);
-
- /* Set the Up/Down selection */
- if (data[6])
- ctrl |= ADDI_TCW_CTRL_CNT_UP;
- else
- ctrl &= ~ADDI_TCW_CTRL_CNT_UP;
- outl(ctrl, iobase + ADDI_TCW_CTRL_REG);
-
- return insn->n;
-}
-
-static int apci1564_counter_insn_write(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data)
-{
- struct apci1564_private *devpriv = dev->private;
- unsigned int chan = CR_CHAN(insn->chanspec);
- unsigned long iobase = devpriv->counters + APCI1564_COUNTER(chan);
- unsigned int ctrl;
-
- ctrl = inl(iobase + ADDI_TCW_CTRL_REG);
- ctrl &= ~(ADDI_TCW_CTRL_GATE | ADDI_TCW_CTRL_TRIG);
- switch (data[1]) {
- case 0: /* Stops the Counter subdevice */
- ctrl = 0;
- break;
- case 1: /* Start the Counter subdevice */
- ctrl |= ADDI_TCW_CTRL_ENA;
- break;
- case 2: /* Clears the Counter subdevice */
- ctrl |= ADDI_TCW_CTRL_GATE;
- break;
- }
- outl(ctrl, iobase + ADDI_TCW_CTRL_REG);
-
- return insn->n;
-}
-
-static int apci1564_counter_insn_read(struct comedi_device *dev,
- struct comedi_subdevice *s,
- struct comedi_insn *insn,
- unsigned int *data)
-{
- struct apci1564_private *devpriv = dev->private;
- unsigned int chan = CR_CHAN(insn->chanspec);
- unsigned long iobase = devpriv->counters + APCI1564_COUNTER(chan);
- unsigned int status;
-
- /* Read the Counter Actual Value. */
- data[0] = inl(iobase + ADDI_TCW_VAL_REG);
-
- status = inl(iobase + ADDI_TCW_STATUS_REG);
- data[1] = (status & ADDI_TCW_STATUS_SOFT_TRIG) ? 1 : 0;
- data[2] = (status & ADDI_TCW_STATUS_HARDWARE_TRIG) ? 1 : 0;
- data[3] = (status & ADDI_TCW_STATUS_SOFT_CLR) ? 1 : 0;
- data[4] = (status & ADDI_TCW_STATUS_OVERFLOW) ? 1 : 0;
-
- return insn->n;
-}
* the raw data[1] to this register along with the raw data[2] value to the
* ADDI_TCW_RELOAD_REG. If anyone tests this and can determine the actual
* timebase/reload operation please let me know.
+ *
+ * The counter subdevice also does not use an async command. All control is
+ * handled by the (*insn_config).
+ *
+ * FIXME: The operation of the counters is not really described in the
+ * datasheet I have. The (*insn_config) needs more work.
*/
#include <linux/module.h>
unsigned int ctrl; /* interrupt mode OR (edge) . AND (level) */
};
-#include "addi-data/hwdrv_apci1564.c"
-
static int apci1564_reset(struct comedi_device *dev)
{
struct apci1564_private *devpriv = dev->private;
return insn->n;
}
+static int apci1564_counter_insn_config(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ struct apci1564_private *devpriv = dev->private;
+ unsigned int chan = CR_CHAN(insn->chanspec);
+ unsigned long iobase = devpriv->counters + APCI1564_COUNTER(chan);
+ unsigned int val;
+
+ switch (data[0]) {
+ case INSN_CONFIG_ARM:
+ val = inl(iobase + ADDI_TCW_CTRL_REG);
+ val |= ADDI_TCW_CTRL_IRQ_ENA | ADDI_TCW_CTRL_CNTR_ENA;
+ outl(data[1], iobase + ADDI_TCW_RELOAD_REG);
+ outl(val, iobase + ADDI_TCW_CTRL_REG);
+ break;
+ case INSN_CONFIG_DISARM:
+ val = inl(iobase + ADDI_TCW_CTRL_REG);
+ val &= ~(ADDI_TCW_CTRL_IRQ_ENA | ADDI_TCW_CTRL_CNTR_ENA);
+ outl(val, iobase + ADDI_TCW_CTRL_REG);
+ break;
+ case INSN_CONFIG_SET_COUNTER_MODE:
+ /*
+ * FIXME: The counter operation is not described in the
+ * datasheet. For now just write the raw data[1] value to
+ * the control register.
+ */
+ outl(data[1], iobase + ADDI_TCW_CTRL_REG);
+ break;
+ case INSN_CONFIG_GET_COUNTER_STATUS:
+ data[1] = 0;
+ val = inl(iobase + ADDI_TCW_CTRL_REG);
+ if (val & ADDI_TCW_CTRL_IRQ_ENA)
+ data[1] |= COMEDI_COUNTER_ARMED;
+ if (val & ADDI_TCW_CTRL_CNTR_ENA)
+ data[1] |= COMEDI_COUNTER_COUNTING;
+ val = inl(iobase + ADDI_TCW_STATUS_REG);
+ if (val & ADDI_TCW_STATUS_OVERFLOW)
+ data[1] |= COMEDI_COUNTER_TERMINAL_COUNT;
+ data[2] = COMEDI_COUNTER_ARMED | COMEDI_COUNTER_COUNTING |
+ COMEDI_COUNTER_TERMINAL_COUNT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return insn->n;
+}
+
+static int apci1564_counter_insn_write(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ struct apci1564_private *devpriv = dev->private;
+ unsigned int chan = CR_CHAN(insn->chanspec);
+ unsigned long iobase = devpriv->counters + APCI1564_COUNTER(chan);
+
+ /* just write the last last to the reload register */
+ if (insn->n) {
+ unsigned int val = data[insn->n - 1];
+
+ outl(val, iobase + ADDI_TCW_RELOAD_REG);
+ }
+
+ return insn->n;
+}
+
+static int apci1564_counter_insn_read(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ struct apci1564_private *devpriv = dev->private;
+ unsigned int chan = CR_CHAN(insn->chanspec);
+ unsigned long iobase = devpriv->counters + APCI1564_COUNTER(chan);
+ int i;
+
+ /* return the actual value of the counter */
+ for (i = 0; i < insn->n; i++)
+ data[i] = inl(iobase + ADDI_TCW_VAL_REG);
+
+ return insn->n;
+}
+
static int apci1564_auto_attach(struct comedi_device *dev,
unsigned long context_unused)
{