--- /dev/null
+/*
+ * DTS File for HiSilicon Hi3798cv200 SoC.
+ *
+ * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
+ *
+ * Released under the GPLv2 only.
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <dt-bindings/clock/histb-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/ti-syscon.h>
+
+/ {
+ compatible = "hisilicon,hi3798cv200";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ };
+ };
+
+ gic: interrupt-controller@f1001000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xf1001000 0x0 0x1000>, /* GICD */
+ <0x0 0xf1002000 0x0 0x100>; /* GICC */
+ #address-cells = <0>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc: soc@f0000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0xf0000000 0x10000000>;
+
+ crg: clock-reset-controller@8a22000 {
+ compatible = "hisilicon,hi3798cv200-crg", "syscon", "simple-mfd";
+ reg = <0x8a22000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <2>;
+
+ gmacphyrst: reset-controller {
+ compatible = "ti,syscon-reset";
+ #reset-cells = <1>;
+ ti,reset-bits =
+ <0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR |
+ DEASSERT_SET|STATUS_NONE)>,
+ <0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR |
+ DEASSERT_SET|STATUS_NONE)>;
+ };
+ };
+
+ sysctrl: system-controller@8000000 {
+ compatible = "hisilicon,hi3798cv200-sysctrl", "syscon";
+ reg = <0x8000000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <2>;
+ };
+
+ uart0: serial@8b00000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x8b00000 0x1000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sysctrl HISTB_UART0_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ uart2: serial@8b02000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x8b02000 0x1000>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg HISTB_UART2_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ i2c0: i2c@8b10000 {
+ compatible = "hisilicon,hix5hd2-i2c";
+ reg = <0x8b10000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&crg HISTB_I2C0_CLK>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@8b11000 {
+ compatible = "hisilicon,hix5hd2-i2c";
+ reg = <0x8b11000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&crg HISTB_I2C1_CLK>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@8b12000 {
+ compatible = "hisilicon,hix5hd2-i2c";
+ reg = <0x8b12000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&crg HISTB_I2C2_CLK>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@8b13000 {
+ compatible = "hisilicon,hix5hd2-i2c";
+ reg = <0x8b13000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&crg HISTB_I2C3_CLK>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@8b14000 {
+ compatible = "hisilicon,hix5hd2-i2c";
+ reg = <0x8b14000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&crg HISTB_I2C4_CLK>;
+ status = "disabled";
+ };
+
+ spi0: spi@8b1a000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x8b1a000 0x1000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ num-cs = <1>;
+ cs-gpios = <&gpio7 1 0>;
+ clocks = <&crg HISTB_SPI0_CLK>;
+ clock-names = "apb_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ emmc: mmc@9830000 {
+ compatible = "snps,dw-mshc";
+ reg = <0x9830000 0x10000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg HISTB_MMC_CIU_CLK>,
+ <&crg HISTB_MMC_BIU_CLK>;
+ clock-names = "ciu", "biu";
+ };
+
+ gpio0: gpio@8b20000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8b20000 0x1000>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio1: gpio@8b21000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8b21000 0x1000>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio2: gpio@8b22000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8b22000 0x1000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio3: gpio@8b23000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8b23000 0x1000>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio4: gpio@8b24000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8b24000 0x1000>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio5: gpio@8004000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8004000 0x1000>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio6: gpio@8b26000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8b26000 0x1000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio7: gpio@8b27000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8b27000 0x1000>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio8: gpio@8b28000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8b28000 0x1000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio9: gpio@8b29000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8b29000 0x1000>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio10: gpio@8b2a000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8b2a000 0x1000>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio11: gpio@8b2b000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8b2b000 0x1000>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio12: gpio@8b2c000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x8b2c000 0x1000>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&crg HISTB_APB_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gmac0: ethernet@9840000 {
+ compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
+ reg = <0x9840000 0x1000>,
+ <0x984300c 0x4>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg HISTB_ETH0_MAC_CLK>,
+ <&crg HISTB_ETH0_MACIF_CLK>;
+ clock-names = "mac_core", "mac_ifc";
+ resets = <&crg 0xcc 8>,
+ <&crg 0xcc 10>,
+ <&gmacphyrst 0>;
+ reset-names = "mac_core", "mac_ifc", "phy";
+ status = "disabled";
+ };
+
+ gmac1: ethernet@9841000 {
+ compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
+ reg = <0x9841000 0x1000>,
+ <0x9843010 0x4>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg HISTB_ETH1_MAC_CLK>,
+ <&crg HISTB_ETH1_MACIF_CLK>;
+ clock-names = "mac_core", "mac_ifc";
+ resets = <&crg 0xcc 9>,
+ <&crg 0xcc 11>,
+ <&gmacphyrst 1>;
+ reset-names = "mac_core", "mac_ifc", "phy";
+ status = "disabled";
+ };
+
+ ir: ir@8001000 {
+ compatible = "hisilicon,hix5hd2-ir";
+ reg = <0x8001000 0x1000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sysctrl HISTB_IR_CLK>;
+ status = "disabled";
+ };
+ };
+};
projects / karo-tx-linux.git / commitdiff