info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info) {
dev_err(&pdev->dev, "unable to allocate memory\n");
- ret = -ENOMEM;
- goto err_nomem;
+ return -ENOMEM;
}
platform_set_drvdata(pdev, info);
res2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (!res1 || !res2) {
dev_err(&pdev->dev, "resource missing\n");
- ret = -EINVAL;
- goto err_nomem;
+ return -EINVAL;
}
vaddr = devm_ioremap_resource(&pdev->dev, res1);
- if (IS_ERR(vaddr)) {
- ret = PTR_ERR(vaddr);
- goto err_ioremap;
- }
+ if (IS_ERR(vaddr))
+ return PTR_ERR(vaddr);
+
base = devm_ioremap_resource(&pdev->dev, res2);
- if (IS_ERR(base)) {
- ret = PTR_ERR(base);
- goto err_ioremap;
- }
+ if (IS_ERR(base))
+ return PTR_ERR(base);
info->dev = &pdev->dev;
info->base = base;
spin_unlock_irq(&davinci_nand_lock);
if (ret == -EBUSY)
- goto err_ecc;
+ return ret;
info->chip.ecc.calculate = nand_davinci_calculate_4bit;
info->chip.ecc.correct = nand_davinci_correct_4bit;
info->chip.ecc.strength = pdata->ecc_bits;
break;
default:
- ret = -EINVAL;
- goto err_ecc;
+ return -EINVAL;
}
info->chip.ecc.mode = ecc_mode;
if (IS_ERR(info->clk)) {
ret = PTR_ERR(info->clk);
dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
- goto err_clk;
+ return ret;
}
ret = clk_prepare_enable(info->clk);
info->core_chipsel);
if (ret < 0) {
dev_dbg(&pdev->dev, "NAND timing values setup fail\n");
- goto err_timing;
+ goto err;
}
spin_lock_irq(&davinci_nand_lock);
ret = nand_scan_ident(&info->mtd, pdata->mask_chipsel ? 2 : 1, NULL);
if (ret < 0) {
dev_dbg(&pdev->dev, "no NAND chip(s) found\n");
- goto err_scan;
+ goto err;
}
/* Update ECC layout if needed ... for 1-bit HW ECC, the default
if (!chunks || info->mtd.oobsize < 16) {
dev_dbg(&pdev->dev, "too small\n");
ret = -EINVAL;
- goto err_scan;
+ goto err;
}
/* For small page chips, preserve the manufacturer's
dev_warn(&pdev->dev, "no 4-bit ECC support yet "
"for 4KiB-page NAND\n");
ret = -EIO;
- goto err_scan;
+ goto err;
syndrome_done:
info->chip.ecc.layout = &info->ecclayout;
ret = nand_scan_tail(&info->mtd);
if (ret < 0)
- goto err_scan;
+ goto err;
if (pdata->parts)
ret = mtd_device_parse_register(&info->mtd, NULL, NULL,
NULL, 0);
}
if (ret < 0)
- goto err_scan;
+ goto err;
val = davinci_nand_readl(info, NRCSR_OFFSET);
dev_info(&pdev->dev, "controller rev. %d.%d\n",
return 0;
-err_scan:
-err_timing:
+err:
clk_disable_unprepare(info->clk);
err_clk_enable:
if (ecc_mode == NAND_ECC_HW_SYNDROME)
ecc4_busy = false;
spin_unlock_irq(&davinci_nand_lock);
-
-err_ecc:
-err_clk:
-err_ioremap:
-err_nomem:
return ret;
}