]> git.karo-electronics.de Git - karo-tx-linux.git/commitdiff
HID: lg4ff - Add range setting support and sysfs interface
authorMichal Malý <madcatxster@gmail.com>
Thu, 4 Aug 2011 14:20:40 +0000 (16:20 +0200)
committerJiri Kosina <jkosina@suse.cz>
Thu, 4 Aug 2011 14:45:55 +0000 (16:45 +0200)
Wheel range of certain Logitech wheels - namely Driving Force GT, Driving Force
Pro, G25 and G27 can be adjusted. Minimu is 40 degrees, maximum 900. DFGT, G25
and G27 all use a common command, DFP uses another one.  Range can be set from
userspace by writing to
"/sys/module/hid_logitech/drivers/hid:logitech/<dev>range". The driver use list
to store range of each connected wheel; it's not possible to use driver_data in
hid_device struct as it's already b hig-lg driver.

Signed-off-by: Michal Malý <madcatxster@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
drivers/hid/hid-lg.c
drivers/hid/hid-lg.h
drivers/hid/hid-lg4ff.c

index e0ae4a09425dc19ddcaa0ae6d4a60d12a6f5d13e..e7a7bd1eb34a55c9f200d92d983148ea6e317a70 100644 (file)
@@ -406,6 +406,15 @@ err_free:
        return ret;
 }
 
+static void lg_remove(struct hid_device *hdev)
+{
+       unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
+       if(quirks & LG_FF4)
+               lg4ff_deinit(hdev);
+
+       hid_hw_stop(hdev);
+}
+
 static const struct hid_device_id lg_devices[] = {
        { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER),
                .driver_data = LG_RDESC | LG_WIRELESS },
@@ -481,6 +490,7 @@ static struct hid_driver lg_driver = {
        .input_mapped = lg_input_mapped,
        .event = lg_event,
        .probe = lg_probe,
+       .remove = lg_remove,
 };
 
 static int __init lg_init(void)
index b0100ba2ae0b2f8b16b4f84b64e2f40fea7f40b6..3a3295991ab3f01221424286a07f2591082c63bd 100644 (file)
@@ -21,8 +21,10 @@ static inline int lg3ff_init(struct hid_device *hdev) { return -1; }
 
 #ifdef CONFIG_LOGIWII_FF
 int lg4ff_init(struct hid_device *hdev);
+int lg4ff_deinit(struct hid_device *hdev);
 #else
 static inline int lg4ff_init(struct hid_device *hdev) { return -1; }
+static inline int lg4ff_deinit(struct hid_device *hdev) { return -1; }
 #endif
 
 #endif
index 8eb938d7aa02c223f3a05c454ec1fbfac5e6510e..5c9eef2267ed7e21cf0cc0d53e6ab478ae378bfa 100644 (file)
 #define G27_REV_MAJ 0x12
 #define G27_REV_MIN 0x38
 
+#define to_hid_device(pdev) container_of(pdev, struct hid_device, dev)
+
+static void hid_lg4ff_set_range_dfp(struct hid_device *hid, u16 range);
+static void hid_lg4ff_set_range_g25(struct hid_device *hid, u16 range);
+static ssize_t lg4ff_range_show(struct device *dev, struct device_attribute *attr, char *buf);
+static ssize_t lg4ff_range_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count);
+
+static DEVICE_ATTR(range, S_IRWXU | S_IRWXG | S_IRWXO, lg4ff_range_show, lg4ff_range_store);
+
+static bool list_inited;
+
+struct lg4ff_device_entry {
+       char  *device_id;       /* Use name in respective kobject structure's address as the ID */
+       __u16 range;
+       __u16 min_range;
+       __u16 max_range;
+       __u8  leds;
+       struct list_head list;
+       void (*set_range)(struct hid_device *hid, u16 range);
+};
+
+static struct lg4ff_device_entry device_list;
+
 static const signed short lg4ff_wheel_effects[] = {
        FF_CONSTANT,
        FF_AUTOCENTER,
@@ -53,17 +76,18 @@ struct lg4ff_wheel {
        const signed short *ff_effects;
        const __u16 min_range;
        const __u16 max_range;
+       void (*set_range)(struct hid_device *hid, u16 range);
 };
 
 static const struct lg4ff_wheel lg4ff_devices[] = {
-       {USB_DEVICE_ID_LOGITECH_WHEEL,       lg4ff_wheel_effects, 40, 270},
-       {USB_DEVICE_ID_LOGITECH_MOMO_WHEEL,  lg4ff_wheel_effects, 40, 270},
-       {USB_DEVICE_ID_LOGITECH_DFP_WHEEL,   lg4ff_wheel_effects, 40, 900},
-       {USB_DEVICE_ID_LOGITECH_G25_WHEEL,   lg4ff_wheel_effects, 40, 900},
-       {USB_DEVICE_ID_LOGITECH_DFGT_WHEEL,  lg4ff_wheel_effects, 40, 900},
-       {USB_DEVICE_ID_LOGITECH_G27_WHEEL,   lg4ff_wheel_effects, 40, 900},
-       {USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2, lg4ff_wheel_effects, 40, 270},
-       {USB_DEVICE_ID_LOGITECH_WII_WHEEL,   lg4ff_wheel_effects, 40, 270}
+       {USB_DEVICE_ID_LOGITECH_WHEEL,       lg4ff_wheel_effects, 40, 270, NULL},
+       {USB_DEVICE_ID_LOGITECH_MOMO_WHEEL,  lg4ff_wheel_effects, 40, 270, NULL},
+       {USB_DEVICE_ID_LOGITECH_DFP_WHEEL,   lg4ff_wheel_effects, 40, 900, hid_lg4ff_set_range_dfp},
+       {USB_DEVICE_ID_LOGITECH_G25_WHEEL,   lg4ff_wheel_effects, 40, 900, hid_lg4ff_set_range_g25},
+       {USB_DEVICE_ID_LOGITECH_DFGT_WHEEL,  lg4ff_wheel_effects, 40, 900, hid_lg4ff_set_range_g25},
+       {USB_DEVICE_ID_LOGITECH_G27_WHEEL,   lg4ff_wheel_effects, 40, 900, hid_lg4ff_set_range_g25},
+       {USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2, lg4ff_wheel_effects, 40, 270, NULL},
+       {USB_DEVICE_ID_LOGITECH_WII_WHEEL,   lg4ff_wheel_effects, 40, 270, NULL}
 };
 
 struct lg4ff_native_cmd {
@@ -106,8 +130,7 @@ static const struct lg4ff_usb_revision lg4ff_revs[] = {
        {G27_REV_MAJ,  G27_REV_MIN,  &native_g27},      /* G27 */
 };
 
-static int hid_lg4ff_play(struct input_dev *dev, void *data,
-                        struct ff_effect *effect)
+static int hid_lg4ff_play(struct input_dev *dev, void *data, struct ff_effect *effect)
 {
        struct hid_device *hid = input_get_drvdata(dev);
        struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
@@ -151,6 +174,77 @@ static void hid_lg4ff_set_autocenter(struct input_dev *dev, u16 magnitude)
        usbhid_submit_report(hid, report, USB_DIR_OUT);
 }
 
+/* Sends command to set range compatible with G25/G27/Driving Force GT */
+static void hid_lg4ff_set_range_g25(struct hid_device *hid, u16 range)
+{
+       struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
+       struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
+       dbg_hid("G25/G27/DFGT: setting range to %u\n", range);
+
+       report->field[0]->value[0] = 0xf8;
+       report->field[0]->value[1] = 0x81;
+       report->field[0]->value[2] = range & 0x00ff;
+       report->field[0]->value[3] = (range & 0xff00) >> 8;
+       report->field[0]->value[4] = 0x00;
+       report->field[0]->value[5] = 0x00;
+       report->field[0]->value[6] = 0x00;
+
+       usbhid_submit_report(hid, report, USB_DIR_OUT);
+}
+
+/* Sends commands to set range compatible with Driving Force Pro wheel */
+static void hid_lg4ff_set_range_dfp(struct hid_device *hid, __u16 range)
+{
+       struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
+       struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
+       int start_left, start_right, full_range;
+       dbg_hid("Driving Force Pro: setting range to %u\n", range);
+
+       /* Prepare "coarse" limit command */
+       report->field[0]->value[0] = 0xf8;
+       report->field[0]->value[1] = 0x00;      /* Set later */
+       report->field[0]->value[2] = 0x00;
+       report->field[0]->value[3] = 0x00;
+       report->field[0]->value[4] = 0x00;
+       report->field[0]->value[5] = 0x00;
+       report->field[0]->value[6] = 0x00;
+
+       if (range > 200) {
+               report->field[0]->value[1] = 0x03;
+               full_range = 900;
+       } else {
+               report->field[0]->value[1] = 0x02;
+               full_range = 200;
+       }
+       usbhid_submit_report(hid, report, USB_DIR_OUT);
+
+       /* Prepare "fine" limit command */
+       report->field[0]->value[0] = 0x81;
+       report->field[0]->value[1] = 0x0b;
+       report->field[0]->value[2] = 0x00;
+       report->field[0]->value[3] = 0x00;
+       report->field[0]->value[4] = 0x00;
+       report->field[0]->value[5] = 0x00;
+       report->field[0]->value[6] = 0x00;
+
+       if (range == 200 || range == 900) {     /* Do not apply any fine limit */
+               usbhid_submit_report(hid, report, USB_DIR_OUT);
+               return;
+       }
+
+       /* Construct fine limit command */
+       start_left = (((full_range - range + 1) * 2047) / full_range);
+       start_right = 0xfff - start_left;
+
+       report->field[0]->value[2] = start_left >> 4;
+       report->field[0]->value[3] = start_right >> 4;
+       report->field[0]->value[4] = 0xff;
+       report->field[0]->value[5] = (start_right & 0xe) << 4 | (start_left & 0xe);
+       report->field[0]->value[6] = 0xff;
+
+       usbhid_submit_report(hid, report, USB_DIR_OUT);
+}
+
 static void hid_lg4ff_switch_native(struct hid_device *hid, const struct lg4ff_native_cmd *cmd)
 {
        struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
@@ -166,6 +260,60 @@ static void hid_lg4ff_switch_native(struct hid_device *hid, const struct lg4ff_n
        }
 }
 
+/* Read current range and display it in terminal */
+static ssize_t lg4ff_range_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+       struct lg4ff_device_entry *entry = 0;
+       struct list_head *h;
+       struct hid_device *hid = to_hid_device(dev);
+       size_t count;
+
+       list_for_each(h, &device_list.list) {
+               entry = list_entry(h, struct lg4ff_device_entry, list);
+               if (strcmp(entry->device_id, (&hid->dev)->kobj.name) == 0)
+                       break;
+       }
+       if (h == &device_list.list) {
+               dbg_hid("Device not found!");
+               return 0;
+       }
+
+       count = scnprintf(buf, PAGE_SIZE, "%u\n", entry->range);
+       return count;
+}
+
+/* Set range to user specified value, call appropriate function
+ * according to the type of the wheel */
+static ssize_t lg4ff_range_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+       struct lg4ff_device_entry *entry = 0;
+       struct list_head *h;
+       struct hid_device *hid = to_hid_device(dev);
+       __u16 range = simple_strtoul(buf, NULL, 10);
+
+       list_for_each(h, &device_list.list) {
+               entry = list_entry(h, struct lg4ff_device_entry, list);
+               if (strcmp(entry->device_id, (&hid->dev)->kobj.name) == 0)
+                       break;
+       }
+       if (h == &device_list.list) {
+               dbg_hid("Device not found!");
+               return count;
+       }
+
+       if (range == 0)
+               range = entry->max_range;
+
+       /* Check if the wheel supports range setting
+        * and that the range is within limits for the wheel */
+       if (entry->set_range != NULL && range >= entry->min_range && range <= entry->max_range) {
+               entry->set_range(hid, range);
+               entry->range = range;
+       }
+
+       return count;
+}
+
 int lg4ff_init(struct hid_device *hid)
 {
        struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list);
@@ -173,7 +321,8 @@ int lg4ff_init(struct hid_device *hid)
        struct input_dev *dev = hidinput->input;
        struct hid_report *report;
        struct hid_field *field;
-       struct usb_device_descriptor *udesc = 0;
+       struct lg4ff_device_entry *entry;
+       struct usb_device_descriptor *udesc;
        int error, i, j;
        __u16 bcdDevice, rev_maj, rev_min;
 
@@ -195,7 +344,7 @@ int lg4ff_init(struct hid_device *hid)
                hid_err(hid, "NULL field\n");
                return -1;
        }
-       
+
        /* Check what wheel has been connected */
        for (i = 0; i < ARRAY_SIZE(lg4ff_devices); i++) {
                if (hid->product == lg4ff_devices[i].product_id) {
@@ -244,7 +393,66 @@ int lg4ff_init(struct hid_device *hid)
        if (test_bit(FF_AUTOCENTER, dev->ffbit))
                dev->ff->set_autocenter = hid_lg4ff_set_autocenter;
 
+               /* Initialize device_list if this is the first device to handle by lg4ff */
+       if (!list_inited) {
+               INIT_LIST_HEAD(&device_list.list);
+               list_inited = 1;
+       }
+
+       /* Add the device to device_list */
+       entry = (struct lg4ff_device_entry *)kzalloc(sizeof(struct lg4ff_device_entry), GFP_KERNEL);
+       if (!entry) {
+               hid_err(hid, "Cannot add device, insufficient memory.\n");
+               return -ENOMEM;
+       }
+       entry->device_id = (char *)kzalloc(strlen((&hid->dev)->kobj.name) + 1, GFP_KERNEL);
+       if (!entry->device_id) {
+               hid_err(hid, "Cannot set device_id, insufficient memory.\n");
+               return -ENOMEM;
+       }
+       strcpy(entry->device_id, (&hid->dev)->kobj.name);
+       entry->min_range = lg4ff_devices[i].min_range;
+       entry->max_range = lg4ff_devices[i].max_range;
+       entry->set_range = lg4ff_devices[i].set_range;
+       list_add(&entry->list, &device_list.list);
+
+       /* Create sysfs interface */
+       error = device_create_file(&hid->dev, &dev_attr_range);
+       if (error)
+               return error;
+       dbg_hid("sysfs interface created\n");
+
+       /* Set the maximum range to start with */
+       entry->range = entry->max_range;
+       if (entry->set_range != NULL)
+               entry->set_range(hid, entry->range);
+
        hid_info(hid, "Force feedback for Logitech Speed Force Wireless by Simon Wood <simon@mungewell.org>\n");
        return 0;
 }
 
+int lg4ff_deinit(struct hid_device *hid)
+{
+       bool found = 0;
+       struct lg4ff_device_entry *entry;
+       struct list_head *h, *g;
+       list_for_each_safe(h, g, &device_list.list) {
+               entry = list_entry(h, struct lg4ff_device_entry, list);
+               if (strcmp(entry->device_id, (&hid->dev)->kobj.name) == 0) {
+                       list_del(h);
+                       kfree(entry->device_id);
+                       kfree(entry);
+                       found = 1;
+                       break;
+               }
+       }
+
+       if (!found) {
+               dbg_hid("Device entry not found!\n");
+               return -1;
+       }
+
+       device_remove_file(&hid->dev, &dev_attr_range);
+       dbg_hid("Device successfully unregistered\n");
+       return 0;
+}