mtd: denali: remove unnecessary casts

Useless casts result in unreadable source code.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 20823df2c1bf8fadf809be9969f19b636b86ad1a..60134394bae4ea2f197554b91fe8073e2905b686 100644 (file)
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -423,10 +423,10 @@ static void find_valid_banks(struct denali_nand_info *denali)
 
        denali->total_used_banks = 1;
        for (i = 0; i < denali->max_banks; i++) {
-               index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 0), 0x90);
-               index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 1), 0);
+               index_addr(denali, MODE_11 | (i << 24) | 0, 0x90);
+               index_addr(denali, MODE_11 | (i << 24) | 1, 0);
                index_addr_read_data(denali,
-                               (uint32_t)(MODE_11 | (i << 24) | 2), &id[i]);
+                               MODE_11 | (i << 24) | 2, &id[i]);
 
                dev_dbg(denali->dev,
                        "Return 1st ID for bank[%d]: %x\n", i, id[i]);
@@ -510,9 +510,9 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
         * For some NAND chips, controller can't report the correct
         * device ID by reading from DEVICE_ID register
         */
-       addr = (uint32_t)MODE_11 | BANK(denali->flash_bank);
-       index_addr(denali, (uint32_t)addr | 0, 0x90);
-       index_addr(denali, (uint32_t)addr | 1, 0);
+       addr = MODE_11 | BANK(denali->flash_bank);
+       index_addr(denali, addr | 0, 0x90);
+       index_addr(denali, addr | 1, 0);
        for (i = 0; i < 8; i++)
                index_addr_read_data(denali, addr | 2, &id_bytes[i]);
        maf_id = id_bytes[0];
@@ -782,14 +782,14 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
        } else if (op == DENALI_WRITE && access_type == SPARE_ACCESS) {
                /* read spare area */
                cmd = MODE_10 | addr;
-               index_addr(denali, (uint32_t)cmd, access_type);
+               index_addr(denali, cmd, access_type);
 
                cmd = MODE_01 | addr;
                iowrite32(cmd, denali->flash_mem);
        } else if (op == DENALI_READ) {
                /* setup page read request for access type */
                cmd = MODE_10 | addr;
-               index_addr(denali, (uint32_t)cmd, access_type);
+               index_addr(denali, cmd, access_type);
 
                /*
                 * page 33 of the NAND controller spec indicates we should not
@@ -800,7 +800,7 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
                        cmd = MODE_01 | addr;
                        iowrite32(cmd, denali->flash_mem);
                } else {
-                       index_addr(denali, (uint32_t)cmd,
+                       index_addr(denali, cmd,
                                        PIPELINE_ACCESS | op | page_count);
 
                        /*
@@ -929,7 +929,7 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
                 */
                addr = BANK(denali->flash_bank) | denali->page;
                cmd = MODE_10 | addr;
-               index_addr(denali, (uint32_t)cmd, MAIN_ACCESS);
+               index_addr(denali, cmd, MAIN_ACCESS);
        }
 }
 
@@ -1035,7 +1035,7 @@ static void denali_setup_dma(struct denali_nand_info *denali, int op)
 {
        uint32_t mode;
        const int page_count = 1;
-       dma_addr_t addr = denali->buf.dma_buf;
+       uint32_t addr = denali->buf.dma_buf;
 
        mode = MODE_10 | BANK(denali->flash_bank);
 
@@ -1045,10 +1045,10 @@ static void denali_setup_dma(struct denali_nand_info *denali, int op)
        index_addr(denali, mode | denali->page, 0x2000 | op | page_count);
 
        /* 2. set memory high address bits 23:8 */
-       index_addr(denali, mode | ((uint16_t)(addr >> 16) << 8), 0x2200);
+       index_addr(denali, mode | ((addr >> 16) << 8), 0x2200);
 
        /* 3. set memory low address bits 23:8 */
-       index_addr(denali, mode | ((uint16_t)addr << 8), 0x2300);
+       index_addr(denali, mode | ((addr & 0xff) << 8), 0x2300);
 
        /* 4. interrupt when complete, burst len = 64 bytes */
        index_addr(denali, mode | 0x14000, 0x2400);
@@ -1287,7 +1287,7 @@ static int denali_erase(struct mtd_info *mtd, int page)
 
        /* setup page read request for access type */
        cmd = MODE_10 | BANK(denali->flash_bank) | page;
-       index_addr(denali, (uint32_t)cmd, 0x1);
+       index_addr(denali, cmd, 0x1);
 
        /* wait for erase to complete or failure to occur */
        irq_status = wait_for_irq(denali, INTR_STATUS__ERASE_COMP |
@@ -1317,12 +1317,12 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
                 * e.g. some of Micron MT29F32G08QAA MLC NAND chips
                 * So here we send READID cmd to NAND insteand
                 */
-               addr = (uint32_t)MODE_11 | BANK(denali->flash_bank);
-               index_addr(denali, (uint32_t)addr | 0, 0x90);
-               index_addr(denali, (uint32_t)addr | 1, 0);
+               addr = MODE_11 | BANK(denali->flash_bank);
+               index_addr(denali, addr | 0, 0x90);
+               index_addr(denali, addr | 1, 0);
                for (i = 0; i < 8; i++) {
                        index_addr_read_data(denali,
-                                               (uint32_t)addr | 2,
+                                               addr | 2,
                                                &id);
                        write_byte_to_buf(denali, id);
                }