]> git.karo-electronics.de Git - linux-beck.git/commitdiff
sis5513: add ->udma_filter method for chipset_family >= ATA_133
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Thu, 11 Oct 2007 21:53:59 +0000 (23:53 +0200)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Thu, 11 Oct 2007 21:53:59 +0000 (23:53 +0200)
* Add sis5513_ata133_udma_filter() for chipset_family >= ATA_133,
  use it to filter UDMA6 mode if ATA133 bit is disabled.

* Remove no longer needed UDMA6 limiting logic from sis5513_tune_chipset().

* Bump driver version.

There should be no functionality changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/pci/sis5513.c

index 26f24802d3e895445711f639f00d4f832d1fe212..1da037f1394e5a71b8cc4a58975ae834aaf4d206 100644 (file)
@@ -1,5 +1,5 @@
 /*
- * linux/drivers/ide/pci/sis5513.c     Version 0.25    Jun 10, 2007
+ * linux/drivers/ide/pci/sis5513.c     Version 0.26    Jul 7, 2007
  *
  * Copyright (C) 1999-2000     Andre Hedrick <andre@linux-ide.org>
  * Copyright (C) 2002          Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer
@@ -582,9 +582,6 @@ static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed)
                                        regdw |= (unsigned long)cycle_time_value[ATA_133][speed-XFER_UDMA_0] << 4;
                                        regdw |= (unsigned long)cvs_time_value[ATA_133][speed-XFER_UDMA_0] << 8;
                                } else {
-                               /* if ATA133 disable, we should not set speed above UDMA5 */
-                                       if (speed > XFER_UDMA_5)
-                                               speed = XFER_UDMA_5;
                                        regdw |= (unsigned long)cycle_time_value[ATA_100][speed-XFER_UDMA_0] << 4;
                                        regdw |= (unsigned long)cvs_time_value[ATA_100][speed-XFER_UDMA_0] << 8;
                                }
@@ -640,6 +637,20 @@ static int sis5513_config_xfer_rate(ide_drive_t *drive)
        return -1;
 }
 
+static u8 sis5513_ata133_udma_filter(ide_drive_t *drive)
+{
+       struct pci_dev *dev = drive->hwif->pci_dev;
+       int drive_pci;
+       u32 reg54 = 0, regdw = 0;
+
+       pci_read_config_dword(dev, 0x54, &reg54);
+       drive_pci = ((reg54 & 0x40000000) ? 0x70 : 0x40) + drive->dn * 4;
+       pci_read_config_dword(dev, drive_pci, &regdw);
+
+       /* if ATA133 disable, we should not set speed above UDMA5 */
+       return (regdw & 0x08) ? ATA_UDMA6 : ATA_UDMA5;
+}
+
 /* Chip detection and general config */
 static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const char *name)
 {
@@ -847,6 +858,9 @@ static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif)
        hwif->tuneproc = &sis5513_tuneproc;
        hwif->speedproc = &sis5513_tune_chipset;
 
+       if (chipset_family >= ATA_133)
+               hwif->udma_filter = sis5513_ata133_udma_filter;
+
        if (!(hwif->dma_base)) {
                hwif->drives[0].autotune = 1;
                hwif->drives[1].autotune = 1;