--- /dev/null
+/*
+ * Copyright 2007, Google Inc.
+ * Copyright 2012, Intel Inc.
+ *
+ * based on omap.c driver, which was
+ * Copyright (C) 2004 Nokia Corporation
+ * Written by Tuukka Tikkanen and Juha Yrjölä <juha.yrjola@nokia.com>
+ * Misc hacks here and there by Tony Lindgren <tony@atomide.com>
+ * Other hacks (DMA, SD, etc) by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/major.h>
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/hdreg.h>
+#include <linux/kdev_t.h>
+#include <linux/blkdev.h>
+#include <linux/mutex.h>
+#include <linux/scatterlist.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/clk.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/scatterlist.h>
+
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#define DRIVER_NAME "goldfish_mmc"
+
+#define BUFFER_SIZE 16384
+
+#define GOLDFISH_MMC_READ(host, addr) (readl(host->reg_base + addr))
+#define GOLDFISH_MMC_WRITE(host, addr, x) (writel(x, host->reg_base + addr))
+
+enum {
+ /* status register */
+ MMC_INT_STATUS = 0x00,
+ /* set this to enable IRQ */
+ MMC_INT_ENABLE = 0x04,
+ /* set this to specify buffer address */
+ MMC_SET_BUFFER = 0x08,
+
+ /* MMC command number */
+ MMC_CMD = 0x0C,
+
+ /* MMC argument */
+ MMC_ARG = 0x10,
+
+ /* MMC response (or R2 bits 0 - 31) */
+ MMC_RESP_0 = 0x14,
+
+ /* MMC R2 response bits 32 - 63 */
+ MMC_RESP_1 = 0x18,
+
+ /* MMC R2 response bits 64 - 95 */
+ MMC_RESP_2 = 0x1C,
+
+ /* MMC R2 response bits 96 - 127 */
+ MMC_RESP_3 = 0x20,
+
+ MMC_BLOCK_LENGTH = 0x24,
+ MMC_BLOCK_COUNT = 0x28,
+
+ /* MMC state flags */
+ MMC_STATE = 0x2C,
+
+ /* MMC_INT_STATUS bits */
+
+ MMC_STAT_END_OF_CMD = 1U << 0,
+ MMC_STAT_END_OF_DATA = 1U << 1,
+ MMC_STAT_STATE_CHANGE = 1U << 2,
+ MMC_STAT_CMD_TIMEOUT = 1U << 3,
+
+ /* MMC_STATE bits */
+ MMC_STATE_INSERTED = 1U << 0,
+ MMC_STATE_READ_ONLY = 1U << 1,
+};
+
+/*
+ * Command types
+ */
+#define OMAP_MMC_CMDTYPE_BC 0
+#define OMAP_MMC_CMDTYPE_BCR 1
+#define OMAP_MMC_CMDTYPE_AC 2
+#define OMAP_MMC_CMDTYPE_ADTC 3
+
+
+struct goldfish_mmc_host {
+ struct mmc_request *mrq;
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+ struct mmc_host *mmc;
+ struct device *dev;
+ unsigned char id; /* 16xx chips have 2 MMC blocks */
+ void __iomem *virt_base;
+ unsigned int phys_base;
+ int irq;
+ unsigned char bus_mode;
+ unsigned char hw_bus_mode;
+
+ unsigned int sg_len;
+ unsigned dma_done:1;
+ unsigned dma_in_use:1;
+
+ void __iomem *reg_base;
+};
+
+static inline int
+goldfish_mmc_cover_is_open(struct goldfish_mmc_host *host)
+{
+ return 0;
+}
+
+static ssize_t
+goldfish_mmc_show_cover_switch(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct goldfish_mmc_host *host = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s\n", goldfish_mmc_cover_is_open(host) ? "open" :
+ "closed");
+}
+
+static DEVICE_ATTR(cover_switch, S_IRUGO, goldfish_mmc_show_cover_switch, NULL);
+
+static void
+goldfish_mmc_start_command(struct goldfish_mmc_host *host, struct mmc_command *cmd)
+{
+ u32 cmdreg;
+ u32 resptype;
+ u32 cmdtype;
+
+ host->cmd = cmd;
+
+ resptype = 0;
+ cmdtype = 0;
+
+ /* Our hardware needs to know exact type */
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_NONE:
+ break;
+ case MMC_RSP_R1:
+ case MMC_RSP_R1B:
+ /* resp 1, 1b, 6, 7 */
+ resptype = 1;
+ break;
+ case MMC_RSP_R2:
+ resptype = 2;
+ break;
+ case MMC_RSP_R3:
+ resptype = 3;
+ break;
+ default:
+ dev_err(mmc_dev(host->mmc),
+ "Invalid response type: %04x\n", mmc_resp_type(cmd));
+ break;
+ }
+
+ if (mmc_cmd_type(cmd) == MMC_CMD_ADTC)
+ cmdtype = OMAP_MMC_CMDTYPE_ADTC;
+ else if (mmc_cmd_type(cmd) == MMC_CMD_BC)
+ cmdtype = OMAP_MMC_CMDTYPE_BC;
+ else if (mmc_cmd_type(cmd) == MMC_CMD_BCR)
+ cmdtype = OMAP_MMC_CMDTYPE_BCR;
+ else
+ cmdtype = OMAP_MMC_CMDTYPE_AC;
+
+ cmdreg = cmd->opcode | (resptype << 8) | (cmdtype << 12);
+
+ if (host->bus_mode == MMC_BUSMODE_OPENDRAIN)
+ cmdreg |= 1 << 6;
+
+ if (cmd->flags & MMC_RSP_BUSY)
+ cmdreg |= 1 << 11;
+
+ if (host->data && !(host->data->flags & MMC_DATA_WRITE))
+ cmdreg |= 1 << 15;
+
+ GOLDFISH_MMC_WRITE(host, MMC_ARG, cmd->arg);
+ GOLDFISH_MMC_WRITE(host, MMC_CMD, cmdreg);
+}
+
+static void goldfish_mmc_xfer_done(struct goldfish_mmc_host *host,
+ struct mmc_data *data)
+{
+ if (host->dma_in_use) {
+ enum dma_data_direction dma_data_dir;
+
+ if (data->flags & MMC_DATA_WRITE)
+ dma_data_dir = DMA_TO_DEVICE;
+ else
+ dma_data_dir = DMA_FROM_DEVICE;
+
+ if (dma_data_dir == DMA_FROM_DEVICE) {
+ /*
+ * We don't really have DMA, so we need
+ * to copy from our platform driver buffer
+ */
+ uint8_t *dest = (uint8_t *)sg_virt(data->sg);
+ memcpy(dest, host->virt_base, data->sg->length);
+ }
+ host->data->bytes_xfered += data->sg->length;
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->sg_len,
+ dma_data_dir);
+ }
+
+ host->data = NULL;
+ host->sg_len = 0;
+
+ /*
+ * NOTE: MMC layer will sometimes poll-wait CMD13 next, issuing
+ * dozens of requests until the card finishes writing data.
+ * It'd be cheaper to just wait till an EOFB interrupt arrives...
+ */
+
+ if (!data->stop) {
+ host->mrq = NULL;
+ mmc_request_done(host->mmc, data->mrq);
+ return;
+ }
+
+ goldfish_mmc_start_command(host, data->stop);
+}
+
+static void goldfish_mmc_end_of_data(struct goldfish_mmc_host *host,
+ struct mmc_data *data)
+{
+ if (!host->dma_in_use) {
+ goldfish_mmc_xfer_done(host, data);
+ return;
+ }
+ if (host->dma_done)
+ goldfish_mmc_xfer_done(host, data);
+}
+
+static void goldfish_mmc_cmd_done(struct goldfish_mmc_host *host,
+ struct mmc_command *cmd)
+{
+ host->cmd = NULL;
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ if (cmd->flags & MMC_RSP_136) {
+ /* response type 2 */
+ cmd->resp[3] =
+ GOLDFISH_MMC_READ(host, MMC_RESP_0);
+ cmd->resp[2] =
+ GOLDFISH_MMC_READ(host, MMC_RESP_1);
+ cmd->resp[1] =
+ GOLDFISH_MMC_READ(host, MMC_RESP_2);
+ cmd->resp[0] =
+ GOLDFISH_MMC_READ(host, MMC_RESP_3);
+ } else {
+ /* response types 1, 1b, 3, 4, 5, 6 */
+ cmd->resp[0] =
+ GOLDFISH_MMC_READ(host, MMC_RESP_0);
+ }
+ }
+
+ if (host->data == NULL || cmd->error) {
+ host->mrq = NULL;
+ mmc_request_done(host->mmc, cmd->mrq);
+ }
+}
+
+static irqreturn_t goldfish_mmc_irq(int irq, void *dev_id)
+{
+ struct goldfish_mmc_host *host = (struct goldfish_mmc_host *)dev_id;
+ u16 status;
+ int end_command = 0;
+ int end_transfer = 0;
+ int transfer_error = 0;
+ int state_changed = 0;
+ int cmd_timeout = 0;
+
+ while ((status = GOLDFISH_MMC_READ(host, MMC_INT_STATUS)) != 0) {
+ GOLDFISH_MMC_WRITE(host, MMC_INT_STATUS, status);
+
+ if (status & MMC_STAT_END_OF_CMD)
+ end_command = 1;
+
+ if (status & MMC_STAT_END_OF_DATA)
+ end_transfer = 1;
+
+ if (status & MMC_STAT_STATE_CHANGE)
+ state_changed = 1;
+
+ if (status & MMC_STAT_CMD_TIMEOUT) {
+ end_command = 0;
+ cmd_timeout = 1;
+ }
+ }
+
+ if (cmd_timeout) {
+ struct mmc_request *mrq = host->mrq;
+ mrq->cmd->error = -ETIMEDOUT;
+ host->mrq = NULL;
+ mmc_request_done(host->mmc, mrq);
+ }
+
+ if (end_command)
+ goldfish_mmc_cmd_done(host, host->cmd);
+
+ if (transfer_error)
+ goldfish_mmc_xfer_done(host, host->data);
+ else if (end_transfer) {
+ host->dma_done = 1;
+ goldfish_mmc_end_of_data(host, host->data);
+ } else if (host->data != NULL) {
+ /*
+ * WORKAROUND -- after porting this driver from 2.6 to 3.4,
+ * during device initialization, cases where host->data is
+ * non-null but end_transfer is false would occur. Doing
+ * nothing in such cases results in no further interrupts,
+ * and initialization failure.
+ * TODO -- find the real cause.
+ */
+ host->dma_done = 1;
+ goldfish_mmc_end_of_data(host, host->data);
+ }
+
+ if (state_changed) {
+ u32 state = GOLDFISH_MMC_READ(host, MMC_STATE);
+ pr_info("%s: Card detect now %d\n", __func__,
+ (state & MMC_STATE_INSERTED));
+ mmc_detect_change(host->mmc, 0);
+ }
+
+ if (!end_command && !end_transfer &&
+ !transfer_error && !state_changed && !cmd_timeout) {
+ status = GOLDFISH_MMC_READ(host, MMC_INT_STATUS);
+ dev_info(mmc_dev(host->mmc),"spurious irq 0x%04x\n", status);
+ if (status != 0) {
+ GOLDFISH_MMC_WRITE(host, MMC_INT_STATUS, status);
+ GOLDFISH_MMC_WRITE(host, MMC_INT_ENABLE, 0);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void goldfish_mmc_prepare_data(struct goldfish_mmc_host *host,
+ struct mmc_request *req)
+{
+ struct mmc_data *data = req->data;
+ int block_size;
+ unsigned sg_len;
+ enum dma_data_direction dma_data_dir;
+
+ host->data = data;
+ if (data == NULL) {
+ GOLDFISH_MMC_WRITE(host, MMC_BLOCK_LENGTH, 0);
+ GOLDFISH_MMC_WRITE(host, MMC_BLOCK_COUNT, 0);
+ host->dma_in_use = 0;
+ return;
+ }
+
+ block_size = data->blksz;
+
+ GOLDFISH_MMC_WRITE(host, MMC_BLOCK_COUNT, data->blocks - 1);
+ GOLDFISH_MMC_WRITE(host, MMC_BLOCK_LENGTH, block_size - 1);
+
+ /*
+ * Cope with calling layer confusion; it issues "single
+ * block" writes using multi-block scatterlists.
+ */
+ sg_len = (data->blocks == 1) ? 1 : data->sg_len;
+
+ if (data->flags & MMC_DATA_WRITE)
+ dma_data_dir = DMA_TO_DEVICE;
+ else
+ dma_data_dir = DMA_FROM_DEVICE;
+
+ host->sg_len = dma_map_sg(mmc_dev(host->mmc), data->sg,
+ sg_len, dma_data_dir);
+ host->dma_done = 0;
+ host->dma_in_use = 1;
+
+ if (dma_data_dir == DMA_TO_DEVICE) {
+ /*
+ * We don't really have DMA, so we need to copy to our
+ * platform driver buffer
+ */
+ const uint8_t *src = (uint8_t *)sg_virt(data->sg);
+ memcpy(host->virt_base, src, data->sg->length);
+ }
+}
+
+static void goldfish_mmc_request(struct mmc_host *mmc, struct mmc_request *req)
+{
+ struct goldfish_mmc_host *host = mmc_priv(mmc);
+
+ WARN_ON(host->mrq != NULL);
+
+ host->mrq = req;
+ goldfish_mmc_prepare_data(host, req);
+ goldfish_mmc_start_command(host, req->cmd);
+
+ /*
+ * This is to avoid accidentally being detected as an SDIO card
+ * in mmc_attach_sdio().
+ */
+ if (req->cmd->opcode == SD_IO_SEND_OP_COND &&
+ req->cmd->flags == (MMC_RSP_SPI_R4 | MMC_RSP_R4 | MMC_CMD_BCR))
+ req->cmd->error = -EINVAL;
+}
+
+static void goldfish_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct goldfish_mmc_host *host = mmc_priv(mmc);
+
+ host->bus_mode = ios->bus_mode;
+ host->hw_bus_mode = host->bus_mode;
+}
+
+static int goldfish_mmc_get_ro(struct mmc_host *mmc)
+{
+ uint32_t state;
+ struct goldfish_mmc_host *host = mmc_priv(mmc);
+
+ state = GOLDFISH_MMC_READ(host, MMC_STATE);
+ return ((state & MMC_STATE_READ_ONLY) != 0);
+}
+
+static const struct mmc_host_ops goldfish_mmc_ops = {
+ .request = goldfish_mmc_request,
+ .set_ios = goldfish_mmc_set_ios,
+ .get_ro = goldfish_mmc_get_ro,
+};
+
+static int goldfish_mmc_probe(struct platform_device *pdev)
+{
+ struct mmc_host *mmc;
+ struct goldfish_mmc_host *host = NULL;
+ struct resource *res;
+ int ret = 0;
+ int irq;
+ dma_addr_t buf_addr;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ irq = platform_get_irq(pdev, 0);
+ if (res == NULL || irq < 0)
+ return -ENXIO;
+
+ mmc = mmc_alloc_host(sizeof(struct goldfish_mmc_host), &pdev->dev);
+ if (mmc == NULL) {
+ ret = -ENOMEM;
+ goto err_alloc_host_failed;
+ }
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+
+ pr_err("mmc: Mapping %lX to %lX\n", (long)res->start, (long)res->end);
+ host->reg_base = ioremap(res->start, res->end - res->start + 1);
+ if (host->reg_base == NULL) {
+ ret = -ENOMEM;
+ goto ioremap_failed;
+ }
+ host->virt_base = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE,
+ &buf_addr, GFP_KERNEL);
+
+ if (host->virt_base == 0) {
+ ret = -ENOMEM;
+ goto dma_alloc_failed;
+ }
+ host->phys_base = buf_addr;
+
+ host->id = pdev->id;
+ host->irq = irq;
+
+ mmc->ops = &goldfish_mmc_ops;
+ mmc->f_min = 400000;
+ mmc->f_max = 24000000;
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+ mmc->caps = MMC_CAP_4_BIT_DATA;
+
+ /* Use scatterlist DMA to reduce per-transfer costs.
+ * NOTE max_seg_size assumption that small blocks aren't
+ * normally used (except e.g. for reading SD registers).
+ */
+ mmc->max_segs = 32;
+ mmc->max_blk_size = 2048; /* MMC_BLOCK_LENGTH is 11 bits (+1) */
+ mmc->max_blk_count = 2048; /* MMC_BLOCK_COUNT is 11 bits (+1) */
+ mmc->max_req_size = BUFFER_SIZE;
+ mmc->max_seg_size = mmc->max_req_size;
+
+ ret = request_irq(host->irq, goldfish_mmc_irq, 0, DRIVER_NAME, host);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed IRQ Adding goldfish MMC\n");
+ goto err_request_irq_failed;
+ }
+
+ host->dev = &pdev->dev;
+ platform_set_drvdata(pdev, host);
+
+ ret = device_create_file(&pdev->dev, &dev_attr_cover_switch);
+ if (ret)
+ dev_warn(mmc_dev(host->mmc),
+ "Unable to create sysfs attributes\n");
+
+ GOLDFISH_MMC_WRITE(host, MMC_SET_BUFFER, host->phys_base);
+ GOLDFISH_MMC_WRITE(host, MMC_INT_ENABLE,
+ MMC_STAT_END_OF_CMD | MMC_STAT_END_OF_DATA |
+ MMC_STAT_STATE_CHANGE | MMC_STAT_CMD_TIMEOUT);
+
+ mmc_add_host(mmc);
+ return 0;
+
+err_request_irq_failed:
+ dma_free_coherent(&pdev->dev, BUFFER_SIZE, host->virt_base,
+ host->phys_base);
+dma_alloc_failed:
+ iounmap(host->reg_base);
+ioremap_failed:
+ mmc_free_host(host->mmc);
+err_alloc_host_failed:
+ return ret;
+}
+
+static int goldfish_mmc_remove(struct platform_device *pdev)
+{
+ struct goldfish_mmc_host *host = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ BUG_ON(host == NULL);
+
+ mmc_remove_host(host->mmc);
+ free_irq(host->irq, host);
+ dma_free_coherent(&pdev->dev, BUFFER_SIZE, host->virt_base, host->phys_base);
+ iounmap(host->reg_base);
+ mmc_free_host(host->mmc);
+ return 0;
+}
+
+static struct platform_driver goldfish_mmc_driver = {
+ .probe = goldfish_mmc_probe,
+ .remove = goldfish_mmc_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ },
+};
+
+module_platform_driver(goldfish_mmc_driver);
+MODULE_LICENSE("GPL v2");
projects / karo-tx-linux.git / commitdiff