#define BTUSB_SWAVE 0x1000
#define BTUSB_INTEL_NEW 0x2000
#define BTUSB_AMP 0x4000
+#define BTUSB_QCA_ROME 0x8000
static const struct usb_device_id btusb_table[] = {
/* Generic Bluetooth USB device */
{ USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
+ /* QCA ROME chipset */
+ { USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME},
+ { USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME},
+
/* Broadcom BCM2035 */
{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
return 0;
}
+#define QCA_DFU_PACKET_LEN 4096
+
+#define QCA_GET_TARGET_VERSION 0x09
+#define QCA_CHECK_STATUS 0x05
+#define QCA_DFU_DOWNLOAD 0x01
+
+#define QCA_SYSCFG_UPDATED 0x40
+#define QCA_PATCH_UPDATED 0x80
+#define QCA_DFU_TIMEOUT 3000
+
+struct qca_version {
+ __le32 rom_version;
+ __le32 patch_version;
+ __le32 ram_version;
+ __le32 ref_clock;
+ __u8 reserved[4];
+} __packed;
+
+struct qca_rampatch_version {
+ __le16 rom_version;
+ __le16 patch_version;
+} __packed;
+
+struct qca_device_info {
+ __le32 rom_version;
+ __u8 rampatch_hdr; /* length of header in rampatch */
+ __u8 nvm_hdr; /* length of header in NVM */
+ __u8 ver_offset; /* offset of version structure in rampatch */
+};
+
+static const struct qca_device_info qca_devices_table[] = {
+ { 0x00000100, 20, 4, 10 }, /* Rome 1.0 */
+ { 0x00000101, 20, 4, 10 }, /* Rome 1.1 */
+ { 0x00000201, 28, 4, 18 }, /* Rome 2.1 */
+ { 0x00000300, 28, 4, 18 }, /* Rome 3.0 */
+ { 0x00000302, 28, 4, 18 }, /* Rome 3.2 */
+};
+
+static int btusb_qca_send_vendor_req(struct hci_dev *hdev, u8 request,
+ void *data, u16 size)
+{
+ struct btusb_data *btdata = hci_get_drvdata(hdev);
+ struct usb_device *udev = btdata->udev;
+ int pipe, err;
+ u8 *buf;
+
+ buf = kmalloc(size, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ /* Found some of USB hosts have IOT issues with ours so that we should
+ * not wait until HCI layer is ready.
+ */
+ pipe = usb_rcvctrlpipe(udev, 0);
+ err = usb_control_msg(udev, pipe, request, USB_TYPE_VENDOR | USB_DIR_IN,
+ 0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
+ if (err < 0) {
+ BT_ERR("%s: Failed to access otp area (%d)", hdev->name, err);
+ goto done;
+ }
+
+ memcpy(data, buf, size);
+
+done:
+ kfree(buf);
+
+ return err;
+}
+
+static int btusb_setup_qca_download_fw(struct hci_dev *hdev,
+ const struct firmware *firmware,
+ size_t hdr_size)
+{
+ struct btusb_data *btdata = hci_get_drvdata(hdev);
+ struct usb_device *udev = btdata->udev;
+ size_t count, size, sent = 0;
+ int pipe, len, err;
+ u8 *buf;
+
+ buf = kmalloc(QCA_DFU_PACKET_LEN, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ count = firmware->size;
+
+ size = min_t(size_t, count, hdr_size);
+ memcpy(buf, firmware->data, size);
+
+ /* USB patches should go down to controller through USB path
+ * because binary format fits to go down through USB channel.
+ * USB control path is for patching headers and USB bulk is for
+ * patch body.
+ */
+ pipe = usb_sndctrlpipe(udev, 0);
+ err = usb_control_msg(udev, pipe, QCA_DFU_DOWNLOAD, USB_TYPE_VENDOR,
+ 0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
+ if (err < 0) {
+ BT_ERR("%s: Failed to send headers (%d)", hdev->name, err);
+ goto done;
+ }
+
+ sent += size;
+ count -= size;
+
+ while (count) {
+ size = min_t(size_t, count, QCA_DFU_PACKET_LEN);
+
+ memcpy(buf, firmware->data + sent, size);
+
+ pipe = usb_sndbulkpipe(udev, 0x02);
+ err = usb_bulk_msg(udev, pipe, buf, size, &len,
+ QCA_DFU_TIMEOUT);
+ if (err < 0) {
+ BT_ERR("%s: Failed to send body at %zd of %zd (%d)",
+ hdev->name, sent, firmware->size, err);
+ break;
+ }
+
+ if (size != len) {
+ BT_ERR("%s: Failed to get bulk buffer", hdev->name);
+ err = -EILSEQ;
+ break;
+ }
+
+ sent += size;
+ count -= size;
+ }
+
+done:
+ kfree(buf);
+ return err;
+}
+
+static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev,
+ struct qca_version *ver,
+ const struct qca_device_info *info)
+{
+ struct qca_rampatch_version *rver;
+ const struct firmware *fw;
+ char fwname[64];
+ int err;
+
+ snprintf(fwname, sizeof(fwname), "qca/rampatch_usb_%08x.bin",
+ le32_to_cpu(ver->rom_version));
+
+ err = request_firmware(&fw, fwname, &hdev->dev);
+ if (err) {
+ BT_ERR("%s: failed to request rampatch file: %s (%d)",
+ hdev->name, fwname, err);
+ return err;
+ }
+
+ BT_INFO("%s: using rampatch file: %s", hdev->name, fwname);
+ rver = (struct qca_rampatch_version *)(fw->data + info->ver_offset);
+ BT_INFO("%s: QCA: patch rome 0x%x build 0x%x, firmware rome 0x%x "
+ "build 0x%x", hdev->name, le16_to_cpu(rver->rom_version),
+ le16_to_cpu(rver->patch_version), le32_to_cpu(ver->rom_version),
+ le32_to_cpu(ver->patch_version));
+
+ if (rver->rom_version != ver->rom_version ||
+ rver->patch_version <= ver->patch_version) {
+ BT_ERR("%s: rampatch file version did not match with firmware",
+ hdev->name);
+ err = -EINVAL;
+ goto done;
+ }
+
+ err = btusb_setup_qca_download_fw(hdev, fw, info->rampatch_hdr);
+
+done:
+ release_firmware(fw);
+
+ return err;
+}
+
+static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
+ struct qca_version *ver,
+ const struct qca_device_info *info)
+{
+ const struct firmware *fw;
+ char fwname[64];
+ int err;
+
+ snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
+ le32_to_cpu(ver->rom_version));
+
+ err = request_firmware(&fw, fwname, &hdev->dev);
+ if (err) {
+ BT_ERR("%s: failed to request NVM file: %s (%d)",
+ hdev->name, fwname, err);
+ return err;
+ }
+
+ BT_INFO("%s: using NVM file: %s", hdev->name, fwname);
+
+ err = btusb_setup_qca_download_fw(hdev, fw, info->nvm_hdr);
+
+ release_firmware(fw);
+
+ return err;
+}
+
+static int btusb_setup_qca(struct hci_dev *hdev)
+{
+ const struct qca_device_info *info = NULL;
+ struct qca_version ver;
+ u8 status;
+ int i, err;
+
+ err = btusb_qca_send_vendor_req(hdev, QCA_GET_TARGET_VERSION, &ver,
+ sizeof(ver));
+ if (err < 0)
+ return err;
+
+ for (i = 0; i < ARRAY_SIZE(qca_devices_table); i++) {
+ if (ver.rom_version == qca_devices_table[i].rom_version)
+ info = &qca_devices_table[i];
+ }
+ if (!info) {
+ BT_ERR("%s: don't support firmware rome 0x%x", hdev->name,
+ le32_to_cpu(ver.rom_version));
+ return -ENODEV;
+ }
+
+ err = btusb_qca_send_vendor_req(hdev, QCA_CHECK_STATUS, &status,
+ sizeof(status));
+ if (err < 0)
+ return err;
+
+ if (!(status & QCA_PATCH_UPDATED)) {
+ err = btusb_setup_qca_load_rampatch(hdev, &ver, info);
+ if (err < 0)
+ return err;
+ }
+
+ if (!(status & QCA_SYSCFG_UPDATED)) {
+ err = btusb_setup_qca_load_nvm(hdev, &ver, info);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
static int btusb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
}
+ if (id->driver_info & BTUSB_QCA_ROME) {
+ data->setup_on_usb = btusb_setup_qca;
+ hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
+ }
+
if (id->driver_info & BTUSB_AMP) {
/* AMP controllers do not support SCO packets */
data->isoc = NULL;
projects / karo-tx-linux.git / commitdiff