]> git.karo-electronics.de Git - karo-tx-linux.git/commitdiff
spi/mpc8xxx: rename spi_mpc8xxx.c to spi_fsl_spi.c
authorMingkai Hu <Mingkai.hu@freescale.com>
Tue, 12 Oct 2010 10:18:30 +0000 (18:18 +0800)
committerGrant Likely <grant.likely@secretlab.ca>
Wed, 13 Oct 2010 03:38:12 +0000 (21:38 -0600)
This will pave the way to refactor out the common code which can be used
by the eSPI controller driver, and rename the SPI controller dirver to the
file spi_fsl_spi.c.

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
drivers/spi/Kconfig
drivers/spi/Makefile
drivers/spi/spi_fsl_spi.c [moved from drivers/spi/spi_mpc8xxx.c with 100% similarity]

index d966de1afc52f57a74d7c3d4834933f2901bcb87..e8f02a6f2d233f4f69700c8e73bc008063c95612 100644 (file)
@@ -182,12 +182,13 @@ config SPI_MPC512x_PSC
          This enables using the Freescale MPC5121 Programmable Serial
          Controller in SPI master mode.
 
-config SPI_MPC8xxx
-       tristate "Freescale MPC8xxx SPI controller"
+config SPI_FSL_SPI
+       tristate "Freescale SPI controller"
        depends on FSL_SOC
        help
-         This enables using the Freescale MPC8xxx SPI controllers in master
-         mode.
+         This enables using the Freescale SPI controllers in master mode.
+         MPC83xx platform uses the controller in cpu mode or CPM/QE mode.
+         MPC8569 uses the controller in QE mode, MPC8610 in cpu mode.
 
 config SPI_OMAP_UWIRE
        tristate "OMAP1 MicroWire"
index f32d11e1ffecc150e88548aa3c5a2c7f72088de3..c6a56c7988235e7836298912062cdec4372dfb6f 100644 (file)
@@ -32,7 +32,7 @@ obj-$(CONFIG_SPI_PL022)                       += amba-pl022.o
 obj-$(CONFIG_SPI_MPC512x_PSC)          += mpc512x_psc_spi.o
 obj-$(CONFIG_SPI_MPC52xx_PSC)          += mpc52xx_psc_spi.o
 obj-$(CONFIG_SPI_MPC52xx)              += mpc52xx_spi.o
-obj-$(CONFIG_SPI_MPC8xxx)              += spi_mpc8xxx.o
+obj-$(CONFIG_SPI_FSL_SPI)              += spi_fsl_spi.o
 obj-$(CONFIG_SPI_PPC4xx)               += spi_ppc4xx.o
 obj-$(CONFIG_SPI_S3C24XX_GPIO)         += spi_s3c24xx_gpio.o
 obj-$(CONFIG_SPI_S3C24XX)              += spi_s3c24xx_hw.o