bool "Comedi PCI drivers"
depends on PCI
---help---
- Enable comedi PCI drivers to be built
-
- Note that the answer to this question won't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about PCI comedi drivers.
+ Enable support for comedi PCI drivers.
if COMEDI_PCI_DRIVERS
comedi-y := comedi_fops.o range.o drivers.o \
comedi_buf.o
+comedi-$(CONFIG_COMEDI_PCI_DRIVERS) += comedi_pci.o
comedi-$(CONFIG_COMEDI_USB_DRIVERS) += comedi_usb.o
comedi-$(CONFIG_PROC_FS) += proc.o
comedi-$(CONFIG_COMPAT) += comedi_compat32.o
--- /dev/null
+/*
+ * comedi_pci.c
+ * Comedi PCI driver specific functions.
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 1997-2000 David A. Schleef <ds@schleef.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/pci.h>
+
+#include "comedidev.h"
+
+/**
+ * comedi_to_pci_dev() - comedi_device pointer to pci_dev pointer.
+ * @dev: comedi_device struct
+ */
+struct pci_dev *comedi_to_pci_dev(struct comedi_device *dev)
+{
+ return dev->hw_dev ? to_pci_dev(dev->hw_dev) : NULL;
+}
+EXPORT_SYMBOL_GPL(comedi_to_pci_dev);
+
+/**
+ * comedi_pci_enable() - Enable the PCI device and request the regions.
+ * @pcidev: pci_dev struct
+ * @res_name: name for the requested reqource
+ */
+int comedi_pci_enable(struct pci_dev *pcidev, const char *res_name)
+{
+ int rc;
+
+ rc = pci_enable_device(pcidev);
+ if (rc < 0)
+ return rc;
+
+ rc = pci_request_regions(pcidev, res_name);
+ if (rc < 0)
+ pci_disable_device(pcidev);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(comedi_pci_enable);
+
+/**
+ * comedi_pci_disable() - Release the regions and disable the PCI device.
+ * @pcidev: pci_dev struct
+ *
+ * This must be matched with a previous successful call to comedi_pci_enable().
+ */
+void comedi_pci_disable(struct pci_dev *pcidev)
+{
+ pci_release_regions(pcidev);
+ pci_disable_device(pcidev);
+}
+EXPORT_SYMBOL_GPL(comedi_pci_disable);
+
+/**
+ * comedi_pci_auto_config() - Configure/probe a comedi PCI driver.
+ * @pcidev: pci_dev struct
+ * @driver: comedi_driver struct
+ *
+ * Typically called from the pci_driver (*probe) function.
+ */
+int comedi_pci_auto_config(struct pci_dev *pcidev,
+ struct comedi_driver *driver)
+{
+ return comedi_auto_config(&pcidev->dev, driver, 0);
+}
+EXPORT_SYMBOL_GPL(comedi_pci_auto_config);
+
+/**
+ * comedi_pci_auto_unconfig() - Unconfigure/remove a comedi PCI driver.
+ * @pcidev: pci_dev struct
+ *
+ * Typically called from the pci_driver (*remove) function.
+ */
+void comedi_pci_auto_unconfig(struct pci_dev *pcidev)
+{
+ comedi_auto_unconfig(&pcidev->dev);
+}
+EXPORT_SYMBOL_GPL(comedi_pci_auto_unconfig);
+
+/**
+ * comedi_pci_driver_register() - Register a comedi PCI driver.
+ * @comedi_driver: comedi_driver struct
+ * @pci_driver: pci_driver struct
+ *
+ * This function is used for the module_init() of comedi PCI drivers.
+ * Do not call it directly, use the module_comedi_pci_driver() helper
+ * macro instead.
+ */
+int comedi_pci_driver_register(struct comedi_driver *comedi_driver,
+ struct pci_driver *pci_driver)
+{
+ int ret;
+
+ ret = comedi_driver_register(comedi_driver);
+ if (ret < 0)
+ return ret;
+
+ ret = pci_register_driver(pci_driver);
+ if (ret < 0) {
+ comedi_driver_unregister(comedi_driver);
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(comedi_pci_driver_register);
+
+/**
+ * comedi_pci_driver_unregister() - Unregister a comedi PCI driver.
+ * @comedi_driver: comedi_driver struct
+ * @pci_driver: pci_driver struct
+ *
+ * This function is used for the module_exit() of comedi PCI drivers.
+ * Do not call it directly, use the module_comedi_pci_driver() helper
+ * macro instead.
+ */
+void comedi_pci_driver_unregister(struct comedi_driver *comedi_driver,
+ struct pci_driver *pci_driver)
+{
+ pci_unregister_driver(pci_driver);
+ comedi_driver_unregister(comedi_driver);
+}
+EXPORT_SYMBOL_GPL(comedi_pci_driver_unregister);
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/timer.h>
-#include <linux/pci.h>
#include "comedi.h"
COMEDI_MINORVERSION, COMEDI_MICROVERSION)
#define COMEDI_RELEASE VERSION
-/*
- * PCI Vendor IDs not in <linux/pci_ids.h>
- */
-#define PCI_VENDOR_ID_KOLTER 0x1001
-#define PCI_VENDOR_ID_ICP 0x104c
-#define PCI_VENDOR_ID_AMCC 0x10e8
-#define PCI_VENDOR_ID_DT 0x1116
-#define PCI_VENDOR_ID_IOTECH 0x1616
-#define PCI_VENDOR_ID_CONTEC 0x1221
-#define PCI_VENDOR_ID_CB 0x1307 /* Measurement Computing */
-#define PCI_VENDOR_ID_ADVANTECH 0x13fe
-#define PCI_VENDOR_ID_MEILHAUS 0x1402
-#define PCI_VENDOR_ID_RTD 0x1435
-#define PCI_VENDOR_ID_ADLINK 0x144a
-#define PCI_VENDOR_ID_AMPLICON 0x14dc
-
#define COMEDI_NUM_MINORS 0x100
#define COMEDI_NUM_BOARD_MINORS 0x30
#define COMEDI_FIRST_SUBDEVICE_MINOR COMEDI_NUM_BOARD_MINORS
module_driver(__comedi_driver, comedi_driver_register, \
comedi_driver_unregister)
-int comedi_pci_enable(struct pci_dev *, const char *);
-void comedi_pci_disable(struct pci_dev *);
-
-int comedi_pci_driver_register(struct comedi_driver *, struct pci_driver *);
-void comedi_pci_driver_unregister(struct comedi_driver *, struct pci_driver *);
-
-/**
- * module_comedi_pci_driver() - Helper macro for registering a comedi PCI driver
- * @__comedi_driver: comedi_driver struct
- * @__pci_driver: pci_driver struct
- *
- * Helper macro for comedi PCI drivers which do not do anything special
- * in module init/exit. This eliminates a lot of boilerplate. Each
- * module may only use this macro once, and calling it replaces
- * module_init() and module_exit()
- */
-#define module_comedi_pci_driver(__comedi_driver, __pci_driver) \
- module_driver(__comedi_driver, comedi_pci_driver_register, \
- comedi_pci_driver_unregister, &(__pci_driver))
-
struct pcmcia_driver;
int comedi_pcmcia_driver_register(struct comedi_driver *,
put_device(old_hw_dev);
}
-static inline struct pci_dev *comedi_to_pci_dev(struct comedi_device *dev)
-{
- return dev->hw_dev ? to_pci_dev(dev->hw_dev) : NULL;
-}
-
unsigned int comedi_buf_write_alloc(struct comedi_async *, unsigned int);
unsigned int comedi_buf_write_free(struct comedi_async *, unsigned int);
struct comedi_driver *driver, unsigned long context);
void comedi_auto_unconfig(struct device *hardware_device);
-static inline int comedi_pci_auto_config(struct pci_dev *pcidev,
- struct comedi_driver *driver)
+#ifdef CONFIG_COMEDI_PCI_DRIVERS
+
+/* comedi_pci.c - comedi PCI driver specific functions */
+
+/*
+ * PCI Vendor IDs not in <linux/pci_ids.h>
+ */
+#define PCI_VENDOR_ID_KOLTER 0x1001
+#define PCI_VENDOR_ID_ICP 0x104c
+#define PCI_VENDOR_ID_AMCC 0x10e8
+#define PCI_VENDOR_ID_DT 0x1116
+#define PCI_VENDOR_ID_IOTECH 0x1616
+#define PCI_VENDOR_ID_CONTEC 0x1221
+#define PCI_VENDOR_ID_CB 0x1307 /* Measurement Computing */
+#define PCI_VENDOR_ID_ADVANTECH 0x13fe
+#define PCI_VENDOR_ID_MEILHAUS 0x1402
+#define PCI_VENDOR_ID_RTD 0x1435
+#define PCI_VENDOR_ID_ADLINK 0x144a
+#define PCI_VENDOR_ID_AMPLICON 0x14dc
+
+struct pci_dev;
+struct pci_driver;
+
+struct pci_dev *comedi_to_pci_dev(struct comedi_device *);
+
+int comedi_pci_enable(struct pci_dev *, const char *);
+void comedi_pci_disable(struct pci_dev *);
+
+int comedi_pci_auto_config(struct pci_dev *, struct comedi_driver *);
+void comedi_pci_auto_unconfig(struct pci_dev *);
+
+int comedi_pci_driver_register(struct comedi_driver *, struct pci_driver *);
+void comedi_pci_driver_unregister(struct comedi_driver *, struct pci_driver *);
+
+/**
+ * module_comedi_pci_driver() - Helper macro for registering a comedi PCI driver
+ * @__comedi_driver: comedi_driver struct
+ * @__pci_driver: pci_driver struct
+ *
+ * Helper macro for comedi PCI drivers which do not do anything special
+ * in module init/exit. This eliminates a lot of boilerplate. Each
+ * module may only use this macro once, and calling it replaces
+ * module_init() and module_exit()
+ */
+#define module_comedi_pci_driver(__comedi_driver, __pci_driver) \
+ module_driver(__comedi_driver, comedi_pci_driver_register, \
+ comedi_pci_driver_unregister, &(__pci_driver))
+
+#else
+
+/*
+ * Some of the comedi mixed ISA/PCI drivers call the PCI specific
+ * functions. Provide some dummy functions if CONFIG_COMEDI_PCI_DRIVERS
+ * is not enabled.
+ */
+
+static inline struct pci_dev *comedi_to_pci_dev(struct comedi_device *dev)
+{
+ return NULL;
+}
+
+static inline int comedi_pci_enable(struct pci_dev *dev, const char *name)
+{
+ return -ENOSYS;
+}
+
+static inline void comedi_pci_disable(struct pci_dev *dev)
{
- return comedi_auto_config(&pcidev->dev, driver, 0);
}
-void comedi_pci_auto_unconfig(struct pci_dev *pcidev);
+#endif /* CONFIG_COMEDI_PCI_DRIVERS */
#ifdef CONFIG_COMEDI_USB_DRIVERS
#include <linux/device.h>
#include <linux/module.h>
-#include <linux/pci.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
#include <linux/errno.h>
}
EXPORT_SYMBOL_GPL(comedi_auto_unconfig);
-/**
- * comedi_pci_enable() - Enable the PCI device and request the regions.
- * @pdev: pci_dev struct
- * @res_name: name for the requested reqource
- */
-int comedi_pci_enable(struct pci_dev *pdev, const char *res_name)
-{
- int rc;
-
- rc = pci_enable_device(pdev);
- if (rc < 0)
- return rc;
-
- rc = pci_request_regions(pdev, res_name);
- if (rc < 0)
- pci_disable_device(pdev);
-
- return rc;
-}
-EXPORT_SYMBOL_GPL(comedi_pci_enable);
-
-/**
- * comedi_pci_disable() - Release the regions and disable the PCI device.
- * @pdev: pci_dev struct
- *
- * This must be matched with a previous successful call to comedi_pci_enable().
- */
-void comedi_pci_disable(struct pci_dev *pdev)
-{
- pci_release_regions(pdev);
- pci_disable_device(pdev);
-}
-EXPORT_SYMBOL_GPL(comedi_pci_disable);
-
-int comedi_pci_driver_register(struct comedi_driver *comedi_driver,
- struct pci_driver *pci_driver)
-{
- int ret;
-
- ret = comedi_driver_register(comedi_driver);
- if (ret < 0)
- return ret;
-
- ret = pci_register_driver(pci_driver);
- if (ret < 0) {
- comedi_driver_unregister(comedi_driver);
- return ret;
- }
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(comedi_pci_driver_register);
-
-void comedi_pci_driver_unregister(struct comedi_driver *comedi_driver,
- struct pci_driver *pci_driver)
-{
- pci_unregister_driver(pci_driver);
- comedi_driver_unregister(comedi_driver);
-}
-EXPORT_SYMBOL_GPL(comedi_pci_driver_unregister);
-
-void comedi_pci_auto_unconfig(struct pci_dev *pcidev)
-{
- comedi_auto_unconfig(&pcidev->dev);
-}
-EXPORT_SYMBOL_GPL(comedi_pci_auto_unconfig);
-
#if IS_ENABLED(CONFIG_PCMCIA)
int comedi_pcmcia_driver_register(struct comedi_driver *comedi_driver,
struct pcmcia_driver *pcmcia_driver)
Configuration Options: not applicable, uses PCI auto config
*/
+#include <linux/pci.h>
+
#include "../comedidev.h"
#include "8255.h"
+#include <linux/pci.h>
+
#include "../comedidev.h"
#include "comedi_fc.h"
#include "amcc_s5933.h"
* source code.
*/
+#include <linux/pci.h>
#include <linux/interrupt.h>
#include "../comedidev.h"
+#include <linux/pci.h>
+
#include "../comedidev.h"
#include "comedi_fc.h"
#include "amcc_s5933.h"
* this source code.
*/
+#include <linux/pci.h>
+
#include "../comedidev.h"
#include "addi_watchdog.h"
#include "comedi_fc.h"
+#include <linux/pci.h>
+
#include "../comedidev.h"
#include "comedi_fc.h"
#include "amcc_s5933.h"
* this source code.
*/
+#include <linux/pci.h>
+
#include "../comedidev.h"
/*
+#include <linux/pci.h>
+
#include <asm/i387.h>
#include "../comedidev.h"
* this source code.
*/
+#include <linux/pci.h>
#include <linux/interrupt.h>
#include "../comedidev.h"
* this source code.
*/
+#include <linux/pci.h>
+
#include "../comedidev.h"
#include "addi_watchdog.h"
+#include <linux/pci.h>
+
#include "../comedidev.h"
#include "comedi_fc.h"
#include "amcc_s5933.h"
+#include <linux/pci.h>
+
#include <asm/i387.h>
#include "../comedidev.h"
* this source code.
*/
+#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
+#include <linux/pci.h>
+
#include "../comedidev.h"
#include "comedi_fc.h"
#include "amcc_s5933.h"
- adl_pci9118.c
*/
+#include <linux/pci.h>
+
#include "../comedidev.h"
/*
Configuration Options: not applicable
*/
+#include <linux/pci.h>
+
#include "../comedidev.h"
/*
Configuration Options: not applicable, uses PCI auto config
*/
-#include "../comedidev.h"
#include <linux/kernel.h>
+#include <linux/pci.h>
#include <linux/delay.h>
+
+#include "../comedidev.h"
#include "comedi_fc.h"
#include "8253.h"
*/
-#include "../comedidev.h"
-
+#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include "../comedidev.h"
+
#include "8253.h"
#include "comedi_fc.h"
* attachment if necessary, and possibly to set other options supported by
* manual attachment.
*/
-#include "../comedidev.h"
+#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/gfp.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include "../comedidev.h"
+
#include "amcc_s5933.h"
#include "8253.h"
#include "comedi_fc.h"
device will be used.
*/
+#include <linux/pci.h>
#include <linux/interrupt.h>
#include "../comedidev.h"
3. Implement calibration.
*/
+#include <linux/pci.h>
+
#include "../comedidev.h"
/* all the registers for the pci1723 board */
*/
-#include "../comedidev.h"
-
+#include <linux/pci.h>
#include <linux/delay.h>
+#include "../comedidev.h"
+
#include "8255.h"
#include "8253.h"
* order they appear in the channel list.
*/
+#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
unused.
*/
+#include <linux/pci.h>
#include <linux/interrupt.h>
#include "../comedidev.h"
The state of the outputs can be read.
*/
+#include <linux/pci.h>
+
#include "../comedidev.h"
#define PC263_DRIVER_NAME "amplc_pc263"
correctly.
*/
+#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
for (or detection of) various hardware problems added by Ian Abbott.
*/
-#include "../comedidev.h"
-
+#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include "../comedidev.h"
+
#include "comedi_fc.h"
#include "8253.h"
#include "8255.h"
analog triggering on 1602 series
*/
-#include "../comedidev.h"
+#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include "../comedidev.h"
+
#include "8253.h"
#include "8255.h"
#include "amcc_s5933.h"
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-#include "../comedidev.h"
+#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include "../comedidev.h"
+
#include "8253.h"
#include "8255.h"
#include "plx9080.h"
* Only simple analog output writing is supported.
*/
+#include <linux/pci.h>
+
#include "../comedidev.h"
#include "comedi_fc.h"
See http://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf for more details.
*/
-#include "../comedidev.h"
-
+#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include "../comedidev.h"
+
#include "plx9052.h"
#include "8255.h"
-Calin Culianu <calin@ajvar.org>
*/
+#include <linux/pci.h>
+
#include "../comedidev.h"
#include "8255.h"
Configuration Options: not applicable, uses comedi PCI auto config
*/
+#include <linux/pci.h>
+
#include "../comedidev.h"
#define PCI_DEVICE_ID_PIO1616L 0x8172
*/
-#include "../comedidev.h"
-
+#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/firmware.h>
+#include "../comedidev.h"
+
#include "8255.h"
#define DAQBOARD2000_FIRMWARE "daqboard2000_firmware.bin"
* driver.
*/
-#include "../comedidev.h"
-
+#include <linux/pci.h>
#include <linux/delay.h>
+#include "../comedidev.h"
+
#include "8255.h"
#include "8253.h"
#include "das08.h"
Command support does not exist, but could be added for this board.
*/
-#include "../comedidev.h"
-
#include <linux/delay.h>
-#include <linux/pci.h>
#include <linux/slab.h>
+#include "../comedidev.h"
+
#include "das08.h"
/* pcmcia includes */
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
+
#include <asm/dma.h>
+
#include "../comedidev.h"
#include "8253.h"
#define DEBUG 1
+#include <linux/pci.h>
+#include <linux/delay.h>
#include <linux/interrupt.h>
+
#include "../comedidev.h"
-#include <linux/delay.h>
#include "comedi_fc.h"
their cards in their manuals.
*/
-#include "../comedidev.h"
+#include <linux/pci.h>
#include <linux/mutex.h>
+#include "../comedidev.h"
+
#define READ_TIMEOUT 50
static const struct comedi_lrange range_pci1050_ai = { 3, {
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/pci.h>
+#include <linux/delay.h>
#include <linux/interrupt.h>
+
#include "../comedidev.h"
-#include <linux/delay.h>
#include "plx9080.h"
#include "comedi_fc.h"
Configuration options: not applicable, uses PCI auto config
*/
+#include <linux/pci.h>
+#include <linux/delay.h>
#include <linux/interrupt.h>
-#include "../comedidev.h"
-#include <linux/delay.h>
-#include <linux/pci.h>
+#include "../comedidev.h"
#define PCI_DEVICE_ID_ICP_MULTI 0x8000
* comedi_nonfree_firmware tarball. The file is called "jr3pci.idm".
*/
-#include "../comedidev.h"
-
+#include <linux/kernel.h>
+#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/ctype.h>
#include <linux/firmware.h>
#include <linux/jiffies.h>
#include <linux/slab.h>
#include <linux/timer.h>
-#include <linux/kernel.h>
+
+#include "../comedidev.h"
+
#include "jr3_pci.h"
#define PCI_VENDOR_ID_JR3 0x1762
Kolter Electronic PCI Counter Card.
*/
+#include <linux/pci.h>
+
#include "../comedidev.h"
#define CNT_CARD_DEVICE_ID 0x0014
*/
-#include <linux/interrupt.h>
-#include "../comedidev.h"
-
+#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/spinlock.h>
+#include "../comedidev.h"
+
#include "comedi_fc.h"
#include "8253.h"
* Analog Input, Analog Output, Digital I/O
*/
+#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/firmware.h>
+
#include "../comedidev.h"
#define ME2600_FIRMWARE "me2600_firmware.bin"
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-#include "mite.h"
+#include <linux/pci.h>
-#include "comedi_fc.h"
#include "../comedidev.h"
+#include "comedi_fc.h"
+#include "mite.h"
#define PCI_MITE_SIZE 4096
#define PCI_DAQ_SIZE 4096
#define DEBUG 1
#define DEBUG_FLAGS
+#include <linux/pci.h>
#include <linux/interrupt.h>
+
#include "../comedidev.h"
#include "comedi_fc.h"
#define DEBUG 1
#define DEBUG_FLAGS
+
+#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
+
#include "../comedidev.h"
#include "comedi_fc.h"
*/
+#include <linux/pci.h>
#include <linux/interrupt.h>
+
#include "../comedidev.h"
+
#include "mite.h"
#include "ni_tio.h"
*/
+#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
+
#include "../comedidev.h"
#include "mite.h"
*/
+#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/io.h>
+#include <linux/delay.h>
+
#include "../comedidev.h"
-#include <linux/delay.h>
#include <asm/dma.h>
#include "8253.h"
/* #define DEBUG 1 */
/* #define DEBUG_FLAGS */
+#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/firmware.h>
+
#include "../comedidev.h"
#include "comedi_fc.h"
*/
+#include <linux/delay.h>
+#include <linux/delay.h>
+
#include "../comedidev.h"
#include <asm/byteorder.h>
-#include <linux/delay.h>
#include "ni_stc.h"
#include "mite.h"
#include "../comedidev.h"
-#include <linux/pci.h> /* for PCI devices */
-
#define CHANS 8
#define IOSIZE 16
#define LSB(x) ((unsigned char)((x) & 0xff))
#include <linux/interrupt.h>
#include <linux/slab.h>
-#include <linux/pci.h>
#include "../comedidev.h"
+
#include "comedi_fc.h"
/* This stuff is all from pcmuio.c -- it refers to the DIO subdevices only */
#include <linux/interrupt.h>
#include <linux/slab.h>
-#include <linux/pci.h>
#include "../comedidev.h"
+
#include "comedi_fc.h"
#define CHANS_PER_PORT 8
*/
-#include <linux/interrupt.h>
+#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/interrupt.h>
#include "../comedidev.h"
comedi_do_insn(cf,&insn); //executing configuration
*/
+#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/types.h>
* options that are used with comedi_config.
*/
-#include "../comedidev.h"
+#include <linux/pci.h>
-#include <linux/pci.h> /* for PCI devices */
+#include "../comedidev.h"
#include "comedi_fc.h"
projects / linux-beck.git / commitdiff