To compile this driver as a module, choose M here: the module
will be called sis900. This is recommended.
-config SUNDANCE
- tristate "Sundance Alta support"
- depends on NET_PCI && PCI
- select CRC32
- select MII
- help
- This driver is for the Sundance "Alta" chip.
- More specific information and updates are available from
- <http://www.scyld.com/network/sundance.html>.
-
-config SUNDANCE_MMIO
- bool "Use MMIO instead of PIO"
- depends on SUNDANCE
- help
- Enable memory-mapped I/O for interaction with Sundance NIC registers.
- Do NOT enable this by default, PIO (enabled when MMIO is disabled)
- is known to solve bugs on certain chips.
-
- If unsure, say N.
-
config TLAN
tristate "TI ThunderLAN support"
depends on NET_PCI && (PCI || EISA)
the questions about this class of network devices. If you say Y, you
will be asked for your specific device in the following questions.
-config DE600
- tristate "D-Link DE600 pocket adapter support"
- depends on NET_POCKET && PARPORT
- ---help---
- This is a network (Ethernet) device which attaches to your parallel
- port. Read <file:Documentation/networking/DLINK.txt> as well as the
- Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>, if you want to use
- this. It is possible to have several devices share a single parallel
- port and it is safe to compile the corresponding drivers into the
- kernel.
-
- To compile this driver as a module, choose M here: the module
- will be called de600.
-
-config DE620
- tristate "D-Link DE620 pocket adapter support"
- depends on NET_POCKET && PARPORT
- ---help---
- This is a network (Ethernet) device which attaches to your parallel
- port. Read <file:Documentation/networking/DLINK.txt> as well as the
- Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>, if you want to use
- this. It is possible to have several devices share a single parallel
- port and it is safe to compile the corresponding drivers into the
- kernel.
-
- To compile this driver as a module, choose M here: the module
- will be called de620.
-
config SGISEEQ
tristate "SGI Seeq ethernet controller support"
depends on SGI_HAS_SEEQ
if NETDEV_1000
-config DL2K
- tristate "DL2000/TC902x-based Gigabit Ethernet support"
- depends on PCI
- select CRC32
- help
- This driver supports DL2000/TC902x-based Gigabit ethernet cards,
- which includes
- D-Link DGE-550T Gigabit Ethernet Adapter.
- D-Link DL2000-based Gigabit Ethernet Adapter.
- Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
-
- To compile this driver as a module, choose M here: the
- module will be called dl2k.
-
config IP1000
tristate "IP1000 Gigabit Ethernet support"
depends on PCI && EXPERIMENTAL
# end link order section
#
-obj-$(CONFIG_SUNDANCE) += sundance.o
obj-$(CONFIG_HAMACHI) += hamachi.o
obj-$(CONFIG_NET) += Space.o loopback.o
obj-$(CONFIG_SEEQ8005) += seeq8005.o
obj-$(CONFIG_IFB) += ifb.o
obj-$(CONFIG_MACVLAN) += macvlan.o
obj-$(CONFIG_MACVTAP) += macvtap.o
-obj-$(CONFIG_DE600) += de600.o
-obj-$(CONFIG_DE620) += de620.o
obj-$(CONFIG_DEFXX) += defxx.o
obj-$(CONFIG_SGISEEQ) += sgiseeq.o
obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
obj-$(CONFIG_TUN) += tun.o
obj-$(CONFIG_VETH) += veth.o
obj-$(CONFIG_NET_NETX) += netx-eth.o
-obj-$(CONFIG_DL2K) += dl2k.o
obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
obj-$(CONFIG_DM9000) += dm9000.o
source "drivers/net/ethernet/brocade/Kconfig"
source "drivers/net/ethernet/chelsio/Kconfig"
source "drivers/net/ethernet/cisco/Kconfig"
+source "drivers/net/ethernet/dlink/Kconfig"
source "drivers/net/ethernet/emulex/Kconfig"
source "drivers/net/ethernet/neterion/Kconfig"
source "drivers/net/ethernet/faraday/Kconfig"
obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/
+obj-$(CONFIG_NET_VENDOR_DLINK) += dlink/
obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/
obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/
obj-$(CONFIG_NET_VENDOR_FARADAY) += faraday/
--- /dev/null
+#
+# D-Link device configuration
+#
+
+config NET_VENDOR_DLINK
+ bool "D-Link devices"
+ depends on PCI || PARPORT
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about D-Link devices. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_DLINK
+
+config DE600
+ tristate "D-Link DE600 pocket adapter support"
+ depends on PARPORT
+ ---help---
+ This is a network (Ethernet) device which attaches to your parallel
+ port. Read <file:Documentation/networking/DLINK.txt> as well as the
+ Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, if you want to use
+ this. It is possible to have several devices share a single parallel
+ port and it is safe to compile the corresponding drivers into the
+ kernel.
+
+ To compile this driver as a module, choose M here: the module
+ will be called de600.
+
+config DE620
+ tristate "D-Link DE620 pocket adapter support"
+ depends on PARPORT
+ ---help---
+ This is a network (Ethernet) device which attaches to your parallel
+ port. Read <file:Documentation/networking/DLINK.txt> as well as the
+ Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, if you want to use
+ this. It is possible to have several devices share a single parallel
+ port and it is safe to compile the corresponding drivers into the
+ kernel.
+
+ To compile this driver as a module, choose M here: the module
+ will be called de620.
+
+config DL2K
+ tristate "DL2000/TC902x-based Gigabit Ethernet support"
+ depends on PCI
+ select CRC32
+ ---help---
+ This driver supports DL2000/TC902x-based Gigabit ethernet cards,
+ which includes
+ D-Link DGE-550T Gigabit Ethernet Adapter.
+ D-Link DL2000-based Gigabit Ethernet Adapter.
+ Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dl2k.
+
+config SUNDANCE
+ tristate "Sundance Alta support"
+ depends on PCI
+ select CRC32
+ select MII
+ ---help---
+ This driver is for the Sundance "Alta" chip.
+ More specific information and updates are available from
+ <http://www.scyld.com/network/sundance.html>.
+
+config SUNDANCE_MMIO
+ bool "Use MMIO instead of PIO"
+ depends on SUNDANCE
+ ---help---
+ Enable memory-mapped I/O for interaction with Sundance NIC registers.
+ Do NOT enable this by default, PIO (enabled when MMIO is disabled)
+ is known to solve bugs on certain chips.
+
+ If unsure, say N.
+
+endif # NET_VENDOR_DLINK
--- /dev/null
+#
+# Makefile for the D-Link network device drivers.
+#
+
+obj-$(CONFIG_DE600) += de600.o
+obj-$(CONFIG_DE620) += de620.o
+obj-$(CONFIG_DL2K) += dl2k.o
+obj-$(CONFIG_SUNDANCE) += sundance.o
projects / mv-sheeva.git / commitdiff