<http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
+config ARCH_NUC93X
+ bool "Nuvoton NUC93X CPU"
+ select CPU_ARM926T
+ select HAVE_CLK
+ select COMMON_CLKDEV
+ help
+ Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a
+ low-power and high performance MPEG-4/JPEG multimedia controller chip.
+
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
select CPU_ARM926T
source "arch/arm/mach-mmp/Kconfig"
+source "arch/arm/mach-nuc93x/Kconfig"
+
source "arch/arm/mach-sa1100/Kconfig"
source "arch/arm/plat-omap/Kconfig"
machine-$(CONFIG_ARCH_U8500) := ux500
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_W90X900) := w90x900
+machine-$(CONFIG_ARCH_NUC93X) := nuc93x
machine-$(CONFIG_FOOTBRIDGE) := footbridge
machine-$(CONFIG_ARCH_MXC91231) := mxc91231
* We don't need to sync the DMA buffer since
* it was allocated via the coherent allocators.
*/
- dma_cache_maint(ptr, size, dir);
+ __dma_single_cpu_to_dev(ptr, size, dir);
}
return dma_addr;
__cpuc_flush_dcache_area(ptr, size);
}
free_safe_buffer(dev->archdata.dmabounce, buf);
+ } else {
+ __dma_single_dev_to_cpu(dma_to_virt(dev, dma_addr), size, dir);
}
}
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
-static void vic_ack_irq(unsigned int irq)
-{
- void __iomem *base = get_irq_chip_data(irq);
- irq &= 31;
- writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
- /* moreover, clear the soft-triggered, in case it was the reason */
- writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
-}
-
-static void vic_mask_irq(unsigned int irq)
-{
- void __iomem *base = get_irq_chip_data(irq);
- irq &= 31;
- writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
-}
-
-static void vic_unmask_irq(unsigned int irq)
-{
- void __iomem *base = get_irq_chip_data(irq);
- irq &= 31;
- writel(1 << irq, base + VIC_INT_ENABLE);
-}
-
-/**
- * vic_init2 - common initialisation code
- * @base: Base of the VIC.
- *
- * Common initialisation code for registeration
- * and resume.
-*/
-static void vic_init2(void __iomem *base)
-{
- int i;
-
- for (i = 0; i < 16; i++) {
- void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
- writel(VIC_VECT_CNTL_ENABLE | i, reg);
- }
-
- writel(32, base + VIC_PL190_DEF_VECT_ADDR);
-}
-
#if defined(CONFIG_PM)
/**
* struct vic_device - VIC PM device
/* we cannot allocate memory when VICs are initially registered */
static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
+static int vic_id;
+
static inline struct vic_device *to_vic(struct sys_device *sys)
{
return container_of(sys, struct vic_device, sysdev);
}
+#endif /* CONFIG_PM */
-static int vic_id;
+/**
+ * vic_init2 - common initialisation code
+ * @base: Base of the VIC.
+ *
+ * Common initialisation code for registeration
+ * and resume.
+*/
+static void vic_init2(void __iomem *base)
+{
+ int i;
+
+ for (i = 0; i < 16; i++) {
+ void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+ writel(VIC_VECT_CNTL_ENABLE | i, reg);
+ }
+
+ writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+}
+#if defined(CONFIG_PM)
static int vic_class_resume(struct sys_device *dev)
{
struct vic_device *vic = to_vic(dev);
.resume = vic_class_resume,
};
-/**
- * vic_pm_register - Register a VIC for later power management control
- * @base: The base address of the VIC.
- * @irq: The base IRQ for the VIC.
- * @resume_sources: bitmask of interrupts allowed for resume sources.
- *
- * Register the VIC with the system device tree so that it can be notified
- * of suspend and resume requests and ensure that the correct actions are
- * taken to re-instate the settings on resume.
- */
-static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
-{
- struct vic_device *v;
-
- if (vic_id >= ARRAY_SIZE(vic_devices))
- printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
- else {
- v = &vic_devices[vic_id];
- v->base = base;
- v->resume_sources = resume_sources;
- v->irq = irq;
- vic_id++;
- }
-}
-
/**
* vic_pm_init - initicall to register VIC pm
*
return 0;
}
-
late_initcall(vic_pm_init);
+/**
+ * vic_pm_register - Register a VIC for later power management control
+ * @base: The base address of the VIC.
+ * @irq: The base IRQ for the VIC.
+ * @resume_sources: bitmask of interrupts allowed for resume sources.
+ *
+ * Register the VIC with the system device tree so that it can be notified
+ * of suspend and resume requests and ensure that the correct actions are
+ * taken to re-instate the settings on resume.
+ */
+static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
+{
+ struct vic_device *v;
+
+ if (vic_id >= ARRAY_SIZE(vic_devices))
+ printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
+ else {
+ v = &vic_devices[vic_id];
+ v->base = base;
+ v->resume_sources = resume_sources;
+ v->irq = irq;
+ vic_id++;
+ }
+}
+#else
+static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
+#endif /* CONFIG_PM */
+
+static void vic_ack_irq(unsigned int irq)
+{
+ void __iomem *base = get_irq_chip_data(irq);
+ irq &= 31;
+ writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+ /* moreover, clear the soft-triggered, in case it was the reason */
+ writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
+}
+
+static void vic_mask_irq(unsigned int irq)
+{
+ void __iomem *base = get_irq_chip_data(irq);
+ irq &= 31;
+ writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+}
+
+static void vic_unmask_irq(unsigned int irq)
+{
+ void __iomem *base = get_irq_chip_data(irq);
+ irq &= 31;
+ writel(1 << irq, base + VIC_INT_ENABLE);
+}
+
+#if defined(CONFIG_PM)
static struct vic_device *vic_from_irq(unsigned int irq)
{
struct vic_device *v = vic_devices;
return 0;
}
-
#else
-static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
-
#define vic_set_wake NULL
#endif /* CONFIG_PM */
.set_wake = vic_set_wake,
};
-/* The PL190 cell from ARM has been modified by ST, so handle both here */
-static void vik_init_st(void __iomem *base, unsigned int irq_start,
- u32 vic_sources);
+/*
+ * The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
+ * The original cell has 32 interrupts, while the modified one has 64,
+ * replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case
+ * the probe function is called twice, with base set to offset 000
+ * and 020 within the page. We call this "second block".
+ */
+static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
+ u32 vic_sources)
+{
+ unsigned int i;
+ int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
+
+ /* Disable all interrupts initially. */
+
+ writel(0, base + VIC_INT_SELECT);
+ writel(0, base + VIC_INT_ENABLE);
+ writel(~0, base + VIC_INT_ENABLE_CLEAR);
+ writel(0, base + VIC_IRQ_STATUS);
+ writel(0, base + VIC_ITCR);
+ writel(~0, base + VIC_INT_SOFT_CLEAR);
+
+ /*
+ * Make sure we clear all existing interrupts. The vector registers
+ * in this cell are after the second block of general registers,
+ * so we can address them using standard offsets, but only from
+ * the second base address, which is 0x20 in the page
+ */
+ if (vic_2nd_block) {
+ writel(0, base + VIC_PL190_VECT_ADDR);
+ for (i = 0; i < 19; i++) {
+ unsigned int value;
+
+ value = readl(base + VIC_PL190_VECT_ADDR);
+ writel(value, base + VIC_PL190_VECT_ADDR);
+ }
+ /* ST has 16 vectors as well, but we don't enable them by now */
+ for (i = 0; i < 16; i++) {
+ void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+ writel(0, reg);
+ }
+
+ writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+ }
+
+ for (i = 0; i < 32; i++) {
+ if (vic_sources & (1 << i)) {
+ unsigned int irq = irq_start + i;
+
+ set_irq_chip(irq, &vic_chip);
+ set_irq_chip_data(irq, base);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+ }
+}
/**
* vic_init - initialise a vectored interrupt controller
switch(vendor) {
case AMBA_VENDOR_ST:
- vik_init_st(base, irq_start, vic_sources);
+ vic_init_st(base, irq_start, vic_sources);
return;
default:
printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
vic_pm_register(base, irq_start, resume_sources);
}
-
-/*
- * The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
- * The original cell has 32 interrupts, while the modified one has 64,
- * replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case
- * the probe function is called twice, with base set to offset 000
- * and 020 within the page. We call this "second block".
- */
-static void __init vik_init_st(void __iomem *base, unsigned int irq_start,
- u32 vic_sources)
-{
- unsigned int i;
- int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
-
- /* Disable all interrupts initially. */
-
- writel(0, base + VIC_INT_SELECT);
- writel(0, base + VIC_INT_ENABLE);
- writel(~0, base + VIC_INT_ENABLE_CLEAR);
- writel(0, base + VIC_IRQ_STATUS);
- writel(0, base + VIC_ITCR);
- writel(~0, base + VIC_INT_SOFT_CLEAR);
-
- /*
- * Make sure we clear all existing interrupts. The vector registers
- * in this cell are after the second block of general registers,
- * so we can address them using standard offsets, but only from
- * the second base address, which is 0x20 in the page
- */
- if (vic_2nd_block) {
- writel(0, base + VIC_PL190_VECT_ADDR);
- for (i = 0; i < 19; i++) {
- unsigned int value;
-
- value = readl(base + VIC_PL190_VECT_ADDR);
- writel(value, base + VIC_PL190_VECT_ADDR);
- }
- /* ST has 16 vectors as well, but we don't enable them by now */
- for (i = 0; i < 16; i++) {
- void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
- writel(0, reg);
- }
-
- writel(32, base + VIC_PL190_DEF_VECT_ADDR);
- }
-
- for (i = 0; i < 32; i++) {
- if (vic_sources & (1 << i)) {
- unsigned int irq = irq_start + i;
-
- set_irq_chip(irq, &vic_chip);
- set_irq_chip_data(irq, base);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
- }
-}
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28-rc7
+# Fri Dec 5 10:58:47 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-AT572D940HF"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+# CONFIG_TASK_DELAY_ACCT is not set
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_FREEZER is not set
+# CONFIG_CGROUP_DEVICE is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+# CONFIG_USER_SCHED is not set
+CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUP_CPUACCT=y
+# CONFIG_RESOURCE_COUNTERS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_MARKERS=y
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_ARCH_AT572D940HF=y
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT572D940HF Board Type
+#
+CONFIG_MACH_AT572D940HFEB=y
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
+CONFIG_NUM_SERIAL=3
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_RESOURCES_64BIT=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="mem=48M console=ttyS0 initrd=0x21100000,3145728 root=/dev/ram0 rw ip=172.16.1.181"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+CONFIG_NET_TCPPROBE=m
+# CONFIG_HAMRADIO is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_DEBUG_DEVICES=y
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=1
+CONFIG_MTD_CONCAT=m
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_MTD_OOPS=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x4000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+CONFIG_MTD_PLATRAM=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=m
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+CONFIG_MTD_M25P80=m
+CONFIG_M25PXX_USE_FAST_READ=y
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
+# CONFIG_MTD_NAND_ATMEL is not set
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
+CONFIG_ATMEL_SSC=m
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=m
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+CONFIG_WLAN_PRE80211=y
+CONFIG_STRIP=m
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_USB_ZD1201=m
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_DM9601=m
+# CONFIG_USB_NET_SMSC95XX is not set
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_LKKBD=m
+CONFIG_KEYBOARD_XTKBD=m
+CONFIG_KEYBOARD_NEWTON=m
+CONFIG_KEYBOARD_STOWAWAY=m
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+# CONFIG_MOUSE_BCM5974 is not set
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_N_HDLC=m
+# CONFIG_RISCOM8 is not set
+CONFIG_SPECIALIX=m
+CONFIG_RIO=m
+# CONFIG_RIO_OLDPCI is not set
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_NVRAM=m
+CONFIG_R3964=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_TCG_TPM=m
+CONFIG_TCG_NSC=m
+CONFIG_TCG_ATMEL=m
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+CONFIG_DS1682=m
+# CONFIG_AT24 is not set
+CONFIG_SENSORS_EEPROM=m
+CONFIG_SENSORS_PCF8574=m
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+CONFIG_SENSORS_PCF8591=m
+CONFIG_SENSORS_MAX6875=m
+CONFIG_SENSORS_TSL2550=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_BITBANG=m
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_AT25=m
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+# CONFIG_SND_PCM_OSS_PLUGINS is not set
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+# CONFIG_SND_AT73C213 is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_BRIGHT=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DELL=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+CONFIG_USB_SERIAL_SPCP8X5=m
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=m
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_MIDI_GADGET=m
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=m
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+CONFIG_RTC_DRV_DS1305=y
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_JBD_DEBUG=y
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+CONFIG_REISERFS_CHECK=y
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+# CONFIG_JFFS2_CMODE_PRIORITY is not set
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_CMODE_FAVOURLZO=y
+# CONFIG_UBIFS_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_LDM_PARTITION=y
+CONFIG_LDM_DEBUG=y
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_SECURITYFS=y
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
* DMA Cache Coherency
* ===================
*
- * dma_inv_range(start, end)
- *
- * Invalidate (discard) the specified virtual address range.
- * May not write back any entries. If 'start' or 'end'
- * are not cache line aligned, those lines must be written
- * back.
- * - start - virtual start address
- * - end - virtual end address
- *
- * dma_clean_range(start, end)
- *
- * Clean (write back) the specified virtual address range.
- * - start - virtual start address
- * - end - virtual end address
- *
* dma_flush_range(start, end)
*
* Clean and invalidate the specified virtual address range.
void (*coherent_user_range)(unsigned long, unsigned long);
void (*flush_kern_dcache_area)(void *, size_t);
- void (*dma_inv_range)(const void *, const void *);
- void (*dma_clean_range)(const void *, const void *);
+ void (*dma_map_area)(const void *, size_t, int);
+ void (*dma_unmap_area)(const void *, size_t, int);
+
void (*dma_flush_range)(const void *, const void *);
};
* is visible to DMA, or data written by DMA to system memory is
* visible to the CPU.
*/
-#define dmac_inv_range cpu_cache.dma_inv_range
-#define dmac_clean_range cpu_cache.dma_clean_range
+#define dmac_map_area cpu_cache.dma_map_area
+#define dmac_unmap_area cpu_cache.dma_unmap_area
#define dmac_flush_range cpu_cache.dma_flush_range
#else
* is visible to DMA, or data written by DMA to system memory is
* visible to the CPU.
*/
-#define dmac_inv_range __glue(_CACHE,_dma_inv_range)
-#define dmac_clean_range __glue(_CACHE,_dma_clean_range)
+#define dmac_map_area __glue(_CACHE,_dma_map_area)
+#define dmac_unmap_area __glue(_CACHE,_dma_unmap_area)
#define dmac_flush_range __glue(_CACHE,_dma_flush_range)
-extern void dmac_inv_range(const void *, const void *);
-extern void dmac_clean_range(const void *, const void *);
+extern void dmac_map_area(const void *, size_t, int);
+extern void dmac_unmap_area(const void *, size_t, int);
extern void dmac_flush_range(const void *, const void *);
#endif
* processes address space. Really, we want to allow our "user
* space" model to handle this.
*/
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
- do { \
- memcpy(dst, src, len); \
- flush_ptrace_access(vma, page, vaddr, dst, len, 1);\
- } while (0)
-
+extern void copy_to_user_page(struct vm_area_struct *, struct page *,
+ unsigned long, void *, const void *, unsigned long);
#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
do { \
memcpy(dst, src, len); \
}
}
-static inline void
-vivt_flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
- unsigned long uaddr, void *kaddr,
- unsigned long len, int write)
-{
- if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
- unsigned long addr = (unsigned long)kaddr;
- __cpuc_coherent_kern_range(addr, addr + len);
- }
-}
-
#ifndef CONFIG_CPU_CACHE_VIPT
#define flush_cache_mm(mm) \
vivt_flush_cache_mm(mm)
vivt_flush_cache_range(vma,start,end)
#define flush_cache_page(vma,addr,pfn) \
vivt_flush_cache_page(vma,addr,pfn)
-#define flush_ptrace_access(vma,page,ua,ka,len,write) \
- vivt_flush_ptrace_access(vma,page,ua,ka,len,write)
#else
extern void flush_cache_mm(struct mm_struct *mm);
extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn);
-extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
- unsigned long uaddr, void *kaddr,
- unsigned long len, int write);
#endif
#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
#endif
/*
- * DMA-consistent mapping functions. These allocate/free a region of
- * uncached, unwrite-buffered mapped memory space for use with DMA
- * devices. This is the "generic" version. The PCI specific version
- * is in pci.h
+ * The DMA API is built upon the notion of "buffer ownership". A buffer
+ * is either exclusively owned by the CPU (and therefore may be accessed
+ * by it) or exclusively owned by the DMA device. These helper functions
+ * represent the transitions between these two ownership states.
*
- * Note: Drivers should NOT use this function directly, as it will break
- * platforms with CONFIG_DMABOUNCE.
- * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
+ * Note, however, that on later ARMs, this notion does not work due to
+ * speculative prefetches. We model our approach on the assumption that
+ * the CPU does do speculative prefetches, which means we clean caches
+ * before transfers and delay cache invalidation until transfer completion.
+ *
+ * Private support functions: these are not part of the API and are
+ * liable to change. Drivers must not use these.
*/
-extern void dma_cache_maint(const void *kaddr, size_t size, int rw);
-extern void dma_cache_maint_page(struct page *page, unsigned long offset,
- size_t size, int rw);
+static inline void __dma_single_cpu_to_dev(const void *kaddr, size_t size,
+ enum dma_data_direction dir)
+{
+ extern void ___dma_single_cpu_to_dev(const void *, size_t,
+ enum dma_data_direction);
+
+ if (!arch_is_coherent())
+ ___dma_single_cpu_to_dev(kaddr, size, dir);
+}
+
+static inline void __dma_single_dev_to_cpu(const void *kaddr, size_t size,
+ enum dma_data_direction dir)
+{
+ extern void ___dma_single_dev_to_cpu(const void *, size_t,
+ enum dma_data_direction);
+
+ if (!arch_is_coherent())
+ ___dma_single_dev_to_cpu(kaddr, size, dir);
+}
+
+static inline void __dma_page_cpu_to_dev(struct page *page, unsigned long off,
+ size_t size, enum dma_data_direction dir)
+{
+ extern void ___dma_page_cpu_to_dev(struct page *, unsigned long,
+ size_t, enum dma_data_direction);
+
+ if (!arch_is_coherent())
+ ___dma_page_cpu_to_dev(page, off, size, dir);
+}
+
+static inline void __dma_page_dev_to_cpu(struct page *page, unsigned long off,
+ size_t size, enum dma_data_direction dir)
+{
+ extern void ___dma_page_dev_to_cpu(struct page *, unsigned long,
+ size_t, enum dma_data_direction);
+
+ if (!arch_is_coherent())
+ ___dma_page_dev_to_cpu(page, off, size, dir);
+}
/*
* Return whether the given device DMA address mask can be supported
{
BUG_ON(!valid_dma_direction(dir));
- if (!arch_is_coherent())
- dma_cache_maint(cpu_addr, size, dir);
+ __dma_single_cpu_to_dev(cpu_addr, size, dir);
return virt_to_dma(dev, cpu_addr);
}
{
BUG_ON(!valid_dma_direction(dir));
- if (!arch_is_coherent())
- dma_cache_maint_page(page, offset, size, dir);
+ __dma_page_cpu_to_dev(page, offset, size, dir);
return page_to_dma(dev, page) + offset;
}
static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
size_t size, enum dma_data_direction dir)
{
- /* nothing to do */
+ __dma_single_dev_to_cpu(dma_to_virt(dev, handle), size, dir);
}
/**
static inline void dma_unmap_page(struct device *dev, dma_addr_t handle,
size_t size, enum dma_data_direction dir)
{
- /* nothing to do */
+ __dma_page_dev_to_cpu(dma_to_page(dev, handle), handle & ~PAGE_MASK,
+ size, dir);
}
#endif /* CONFIG_DMABOUNCE */
{
BUG_ON(!valid_dma_direction(dir));
- dmabounce_sync_for_cpu(dev, handle, offset, size, dir);
+ if (!dmabounce_sync_for_cpu(dev, handle, offset, size, dir))
+ return;
+
+ __dma_single_dev_to_cpu(dma_to_virt(dev, handle) + offset, size, dir);
}
static inline void dma_sync_single_range_for_device(struct device *dev,
if (!dmabounce_sync_for_device(dev, handle, offset, size, dir))
return;
- if (!arch_is_coherent())
- dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
+ __dma_single_cpu_to_dev(dma_to_virt(dev, handle) + offset, size, dir);
}
static inline void dma_sync_single_for_cpu(struct device *dev,
#endif
struct page;
+struct vm_area_struct;
struct cpu_user_fns {
void (*cpu_clear_user_highpage)(struct page *page, unsigned long vaddr);
void (*cpu_copy_user_highpage)(struct page *to, struct page *from,
- unsigned long vaddr);
+ unsigned long vaddr, struct vm_area_struct *vma);
};
#ifdef MULTI_USER
extern void __cpu_clear_user_highpage(struct page *page, unsigned long vaddr);
extern void __cpu_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr);
+ unsigned long vaddr, struct vm_area_struct *vma);
#endif
#define clear_user_highpage(page,vaddr) \
#define __HAVE_ARCH_COPY_USER_HIGHPAGE
#define copy_user_highpage(to,from,vaddr,vma) \
- __cpu_copy_user_highpage(to, from, vaddr)
+ __cpu_copy_user_highpage(to, from, vaddr, vma)
#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE)
extern void copy_page(void *to, const void *from);
return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
}
+static inline int cache_ops_need_broadcast(void)
+{
+ return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 1;
+}
+
#endif
*/
#include <linux/sched.h>
#include <linux/mm.h>
+#include <linux/dma-mapping.h>
#include <asm/mach/arch.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
#ifdef MULTI_PABORT
DEFINE(PROCESSOR_PABT_FUNC, offsetof(struct processor, _prefetch_abort));
#endif
+ BLANK();
+ DEFINE(DMA_BIDIRECTIONAL, DMA_BIDIRECTIONAL);
+ DEFINE(DMA_TO_DEVICE, DMA_TO_DEVICE);
+ DEFINE(DMA_FROM_DEVICE, DMA_FROM_DEVICE);
return 0;
}
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL
+config ARCH_AT572D940HF
+ bool "AT572D940HF"
+ select CPU_ARM926T
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+
config ARCH_AT91X40
bool "AT91x40"
# ----------------------------------------------------------
+if ARCH_AT572D940HF
+
+comment "AT572D940HF Board Type"
+
+config MACH_AT572D940HFEB
+ bool "AT572D940HF-EK"
+ depends on ARCH_AT572D940HF
+ select HAVE_AT91_DATAFLASH_CARD
+ select HAVE_NAND_ATMEL_BUSWIDTH_16
+ help
+ Select this if you are using Atmel's AT572D940HF-EK evaluation kit.
+ <http://www.atmel.com/products/diopsis/default.asp>
+
+endif
+
+# ----------------------------------------------------------
+
if ARCH_AT91X40
comment "AT91X40 Board Type"
obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT572D940HF) += at572d940hf.o at91sam926x_time.o at572d940hf_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
# AT91RM9200 board-specific support
# AT91CAP9 board-specific support
obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
+# AT572D940HF board-specific support
+obj-$(CONFIG_MACH_AT572D940HFEB) += board-at572d940hf_ek.o
+
# AT91X40 board-specific support
obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
--- /dev/null
+/*
+ * arch/arm/mach-at91/at572d940hf.c
+ *
+ * Antonio R. Costa <costa.antonior@gmail.com>
+ * Copyright (C) 2008 Atmel
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/at572d940hf.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at572d940hf_io_desc[] __initdata = {
+ {
+ .virtual = AT91_VA_BASE_SYS,
+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_IO_VIRT_BASE - AT572D940HF_SRAM_SIZE,
+ .pfn = __phys_to_pfn(AT572D940HF_SRAM_BASE),
+ .length = AT572D940HF_SRAM_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+/* --------------------------------------------------------------------
+ * Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+ .name = "pioA_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_PIOA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+ .name = "pioB_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_PIOB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+ .name = "pioC_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_PIOC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk macb_clk = {
+ .name = "macb_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_EMAC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_US0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_US1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_US2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc_clk = {
+ .name = "mci_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_MCI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk udc_clk = {
+ .name = "udc_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_UDP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi0_clk = {
+ .name = "twi0_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_TWI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+ .name = "spi0_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_SPI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+ .name = "spi1_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_SPI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc0_clk = {
+ .name = "ssc0_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_SSC0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc1_clk = {
+ .name = "ssc1_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_SSC1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc2_clk = {
+ .name = "ssc2_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_SSC2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc0_clk = {
+ .name = "tc0_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_TC0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+ .name = "tc1_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_TC1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+ .name = "tc2_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_TC2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+ .name = "ohci_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_UHP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc3_clk = {
+ .name = "ssc3_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_SSC3,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi1_clk = {
+ .name = "twi1_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_TWI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk can0_clk = {
+ .name = "can0_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_CAN0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk can1_clk = {
+ .name = "can1_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_CAN1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mAgicV_clk = {
+ .name = "mAgicV_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_MSIRQ0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
+
+static struct clk *periph_clocks[] __initdata = {
+ &pioA_clk,
+ &pioB_clk,
+ &pioC_clk,
+ &macb_clk,
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &mmc_clk,
+ &udc_clk,
+ &twi0_clk,
+ &spi0_clk,
+ &spi1_clk,
+ &ssc0_clk,
+ &ssc1_clk,
+ &ssc2_clk,
+ &tc0_clk,
+ &tc1_clk,
+ &tc2_clk,
+ &ohci_clk,
+ &ssc3_clk,
+ &twi1_clk,
+ &can0_clk,
+ &can1_clk,
+ &mAgicV_clk,
+ /* irq0 .. irq2 */
+};
+
+/*
+ * The five programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+ .name = "pck0",
+ .pmc_mask = AT91_PMC_PCK0,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 0,
+};
+static struct clk pck1 = {
+ .name = "pck1",
+ .pmc_mask = AT91_PMC_PCK1,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 1,
+};
+static struct clk pck2 = {
+ .name = "pck2",
+ .pmc_mask = AT91_PMC_PCK2,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 2,
+};
+static struct clk pck3 = {
+ .name = "pck3",
+ .pmc_mask = AT91_PMC_PCK3,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 3,
+};
+
+static struct clk mAgicV_mem_clk = {
+ .name = "mAgicV_mem_clk",
+ .pmc_mask = AT91_PMC_PCK4,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 4,
+};
+
+/* HClocks */
+static struct clk hck0 = {
+ .name = "hck0",
+ .pmc_mask = AT91_PMC_HCK0,
+ .type = CLK_TYPE_SYSTEM,
+ .id = 0,
+};
+static struct clk hck1 = {
+ .name = "hck1",
+ .pmc_mask = AT91_PMC_HCK1,
+ .type = CLK_TYPE_SYSTEM,
+ .id = 1,
+};
+
+static void __init at572d940hf_register_clocks(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+ clk_register(periph_clocks[i]);
+
+ clk_register(&pck0);
+ clk_register(&pck1);
+ clk_register(&pck2);
+ clk_register(&pck3);
+ clk_register(&mAgicV_mem_clk);
+
+ clk_register(&hck0);
+ clk_register(&hck1);
+}
+
+/* --------------------------------------------------------------------
+ * GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at572d940hf_gpio[] = {
+ {
+ .id = AT572D940HF_ID_PIOA,
+ .offset = AT91_PIOA,
+ .clock = &pioA_clk,
+ }, {
+ .id = AT572D940HF_ID_PIOB,
+ .offset = AT91_PIOB,
+ .clock = &pioB_clk,
+ }, {
+ .id = AT572D940HF_ID_PIOC,
+ .offset = AT91_PIOC,
+ .clock = &pioC_clk,
+ }
+};
+
+static void at572d940hf_reset(void)
+{
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+
+/* --------------------------------------------------------------------
+ * AT572D940HF processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at572d940hf_initialize(unsigned long main_clock)
+{
+ /* Map peripherals */
+ iotable_init(at572d940hf_io_desc, ARRAY_SIZE(at572d940hf_io_desc));
+
+ at91_arch_reset = at572d940hf_reset;
+ at91_extern_irq = (1 << AT572D940HF_ID_IRQ0) | (1 << AT572D940HF_ID_IRQ1)
+ | (1 << AT572D940HF_ID_IRQ2);
+
+ /* Init clock subsystem */
+ at91_clock_init(main_clock);
+
+ /* Register the processor-specific clocks */
+ at572d940hf_register_clocks();
+
+ /* Register GPIO subsystem */
+ at91_gpio_init(at572d940hf_gpio, 3);
+}
+
+/* --------------------------------------------------------------------
+ * Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at572d940hf_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller */
+ 7, /* System Peripherals */
+ 0, /* Parallel IO Controller A */
+ 0, /* Parallel IO Controller B */
+ 0, /* Parallel IO Controller C */
+ 3, /* Ethernet */
+ 6, /* USART 0 */
+ 6, /* USART 1 */
+ 6, /* USART 2 */
+ 0, /* Multimedia Card Interface */
+ 4, /* USB Device Port */
+ 0, /* Two-Wire Interface 0 */
+ 6, /* Serial Peripheral Interface 0 */
+ 6, /* Serial Peripheral Interface 1 */
+ 5, /* Serial Synchronous Controller 0 */
+ 5, /* Serial Synchronous Controller 1 */
+ 5, /* Serial Synchronous Controller 2 */
+ 0, /* Timer Counter 0 */
+ 0, /* Timer Counter 1 */
+ 0, /* Timer Counter 2 */
+ 3, /* USB Host port */
+ 3, /* Serial Synchronous Controller 3 */
+ 0, /* Two-Wire Interface 1 */
+ 0, /* CAN Controller 0 */
+ 0, /* CAN Controller 1 */
+ 0, /* mAgicV HALT line */
+ 0, /* mAgicV SIRQ0 line */
+ 0, /* mAgicV exception line */
+ 0, /* mAgicV end of DMA line */
+ 0, /* Advanced Interrupt Controller */
+ 0, /* Advanced Interrupt Controller */
+ 0, /* Advanced Interrupt Controller */
+};
+
+void __init at572d940hf_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+ if (!priority)
+ priority = at572d940hf_default_irq_priority;
+
+ /* Initialize the AIC interrupt controller */
+ at91_aic_init(priority);
+
+ /* Enable GPIO interrupts */
+ at91_gpio_irq_setup();
+}
+
--- /dev/null
+/*
+ * arch/arm/mach-at91/at572d940hf_devices.c
+ *
+ * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com>
+ * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ * Copyright (C) 2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at572d940hf.h>
+#include <mach/at572d940hf_matrix.h>
+#include <mach/at91sam9_smc.h>
+
+#include "generic.h"
+#include "sam9_smc.h"
+
+
+/* --------------------------------------------------------------------
+ * USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+ [0] = {
+ .start = AT572D940HF_UHP_BASE,
+ .end = AT572D940HF_UHP_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_UHP,
+ .end = AT572D940HF_ID_UHP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_usbh_device = {
+ .name = "at91_ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &usbh_data,
+ },
+ .resource = usbh_resources,
+ .num_resources = ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+ if (!data)
+ return;
+
+ usbh_data = *data;
+ platform_device_register(&at572d940hf_usbh_device);
+
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * USB Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_USB_GADGET_AT91
+static struct at91_udc_data udc_data;
+
+static struct resource udc_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_UDP,
+ .end = AT572D940HF_BASE_UDP + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_UDP,
+ .end = AT572D940HF_ID_UDP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_udc_device = {
+ .name = "at91_udc",
+ .id = -1,
+ .dev = {
+ .platform_data = &udc_data,
+ },
+ .resource = udc_resources,
+ .num_resources = ARRAY_SIZE(udc_resources),
+};
+
+void __init at91_add_device_udc(struct at91_udc_data *data)
+{
+ if (!data)
+ return;
+
+ if (data->vbus_pin) {
+ at91_set_gpio_input(data->vbus_pin, 0);
+ at91_set_deglitch(data->vbus_pin, 1);
+ }
+
+ /* Pullup pin is handled internally */
+
+ udc_data = *data;
+ platform_device_register(&at572d940hf_udc_device);
+}
+#else
+void __init at91_add_device_udc(struct at91_udc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = DMA_BIT_MASK(32);
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_EMAC,
+ .end = AT572D940HF_BASE_EMAC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_EMAC,
+ .end = AT572D940HF_ID_EMAC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_eth_device = {
+ .name = "macb",
+ .id = -1,
+ .dev = {
+ .dma_mask = ð_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = ð_data,
+ },
+ .resource = eth_resources,
+ .num_resources = ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+ if (!data)
+ return;
+
+ if (data->phy_irq_pin) {
+ at91_set_gpio_input(data->phy_irq_pin, 0);
+ at91_set_deglitch(data->phy_irq_pin, 1);
+ }
+
+ /* Only RMII is supported */
+ data->is_rmii = 1;
+
+ /* Pins used for RMII */
+ at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXCK_EREFCK */
+ at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PA18, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PA19, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PA20, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PA23, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PA21, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PA22, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PA13, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PA14, 0); /* EMDC */
+
+ eth_data = *data;
+ platform_device_register(&at572d940hf_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
+static struct at91_mmc_data mmc_data;
+
+static struct resource mmc_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_MCI,
+ .end = AT572D940HF_BASE_MCI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_MCI,
+ .end = AT572D940HF_ID_MCI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_mmc_device = {
+ .name = "at91_mci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &mmc_data,
+ },
+ .resource = mmc_resources,
+ .num_resources = ARRAY_SIZE(mmc_resources),
+};
+
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+{
+ if (!data)
+ return;
+
+ /* input/irq */
+ if (data->det_pin) {
+ at91_set_gpio_input(data->det_pin, 1);
+ at91_set_deglitch(data->det_pin, 1);
+ }
+ if (data->wp_pin)
+ at91_set_gpio_input(data->wp_pin, 1);
+ if (data->vcc_pin)
+ at91_set_gpio_output(data->vcc_pin, 0);
+
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PC22, 0);
+
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PC23, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PC24, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PC25, 1);
+ at91_set_A_periph(AT91_PIN_PC26, 1);
+ at91_set_A_periph(AT91_PIN_PC27, 1);
+ }
+
+ mmc_data = *data;
+ platform_device_register(&at572d940hf_mmc_device);
+}
+#else
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
+
+#define NAND_BASE AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+ {
+ .start = NAND_BASE,
+ .end = NAND_BASE + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at572d940hf_nand_device = {
+ .name = "atmel_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &nand_data,
+ },
+ .resource = nand_resources,
+ .num_resources = ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct atmel_nand_data *data)
+{
+ unsigned long csa;
+
+ if (!data)
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+
+ /* enable pin */
+ if (data->enable_pin)
+ at91_set_gpio_output(data->enable_pin, 1);
+
+ /* ready/busy pin */
+ if (data->rdy_pin)
+ at91_set_gpio_input(data->rdy_pin, 1);
+
+ /* card detect pin */
+ if (data->det_pin)
+ at91_set_gpio_input(data->det_pin, 1);
+
+ at91_set_A_periph(AT91_PIN_PB28, 0); /* A[22] */
+ at91_set_B_periph(AT91_PIN_PA28, 0); /* NANDOE */
+ at91_set_B_periph(AT91_PIN_PA29, 0); /* NANDWE */
+
+ nand_data = *data;
+ platform_device_register(&at572d940hf_nand_device);
+}
+
+#else
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data pdata = {
+ .sda_pin = AT91_PIN_PC7,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PC8,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+};
+
+static struct platform_device at572d940hf_twi_device {
+ .name = "i2c-gpio",
+ .id = -1,
+ .dev.platform_data = &pdata,
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+ at91_set_GPIO_periph(AT91_PIN_PC7, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PC7, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PA8, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PC8, 1);
+
+ i2c_register_board_info(0, devices, nr_devices);
+ platform_device_register(&at572d940hf_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi0_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_TWI0,
+ .end = AT572D940HF_BASE_TWI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_TWI0,
+ .end = AT572D940HF_ID_TWI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_twi0_device = {
+ .name = "at91_i2c",
+ .id = 0,
+ .resource = twi0_resources,
+ .num_resources = ARRAY_SIZE(twi0_resources),
+};
+
+static struct resource twi1_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_TWI1,
+ .end = AT572D940HF_BASE_TWI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_TWI1,
+ .end = AT572D940HF_ID_TWI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_twi1_device = {
+ .name = "at91_i2c",
+ .id = 1,
+ .resource = twi1_resources,
+ .num_resources = ARRAY_SIZE(twi1_resources),
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+ /* pins used for TWI0 interface */
+ at91_set_A_periph(AT91_PIN_PC7, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PC7, 1);
+
+ at91_set_A_periph(AT91_PIN_PC8, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PC8, 1);
+
+ /* pins used for TWI1 interface */
+ at91_set_A_periph(AT91_PIN_PC20, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PC20, 1);
+
+ at91_set_A_periph(AT91_PIN_PC21, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PC21, 1);
+
+ i2c_register_board_info(0, devices, nr_devices);
+ platform_device_register(&at572d940hf_twi0_device);
+ platform_device_register(&at572d940hf_twi1_device);
+}
+#else
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+static struct resource spi0_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_SPI0,
+ .end = AT572D940HF_BASE_SPI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_SPI0,
+ .end = AT572D940HF_ID_SPI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_spi0_device = {
+ .name = "atmel_spi",
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi0_resources,
+ .num_resources = ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
+
+static struct resource spi1_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_SPI1,
+ .end = AT572D940HF_BASE_SPI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_SPI1,
+ .end = AT572D940HF_ID_SPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_spi1_device = {
+ .name = "atmel_spi",
+ .id = 1,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi1_resources,
+ .num_resources = ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PC3, AT91_PIN_PC4, AT91_PIN_PC5, AT91_PIN_PC6 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+ int i;
+ unsigned long cs_pin;
+ short enable_spi0 = 0;
+ short enable_spi1 = 0;
+
+ /* Choose SPI chip-selects */
+ for (i = 0; i < nr_devices; i++) {
+ if (devices[i].controller_data)
+ cs_pin = (unsigned long) devices[i].controller_data;
+ else if (devices[i].bus_num == 0)
+ cs_pin = spi0_standard_cs[devices[i].chip_select];
+ else
+ cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+ if (devices[i].bus_num == 0)
+ enable_spi0 = 1;
+ else
+ enable_spi1 = 1;
+
+ /* enable chip-select pin */
+ at91_set_gpio_output(cs_pin, 1);
+
+ /* pass chip-select pin to driver */
+ devices[i].controller_data = (void *) cs_pin;
+ }
+
+ spi_register_board_info(devices, nr_devices);
+
+ /* Configure SPI bus(es) */
+ if (enable_spi0) {
+ at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
+
+ at91_clock_associate("spi0_clk", &at572d940hf_spi0_device.dev, "spi_clk");
+ platform_device_register(&at572d940hf_spi0_device);
+ }
+ if (enable_spi1) {
+ at91_set_A_periph(AT91_PIN_PC0, 0); /* SPI1_MISO */
+ at91_set_A_periph(AT91_PIN_PC1, 0); /* SPI1_MOSI */
+ at91_set_A_periph(AT91_PIN_PC2, 0); /* SPI1_SPCK */
+
+ at91_clock_associate("spi1_clk", &at572d940hf_spi1_device.dev, "spi_clk");
+ platform_device_register(&at572d940hf_spi1_device);
+ }
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Timer/Counter blocks
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_ATMEL_TCLIB
+
+static struct resource tcb_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_TCB,
+ .end = AT572D940HF_BASE_TCB + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_TC0,
+ .end = AT572D940HF_ID_TC0,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = AT572D940HF_ID_TC1,
+ .end = AT572D940HF_ID_TC1,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = AT572D940HF_ID_TC2,
+ .end = AT572D940HF_ID_TC2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_tcb_device = {
+ .name = "atmel_tcb",
+ .id = 0,
+ .resource = tcb_resources,
+ .num_resources = ARRAY_SIZE(tcb_resources),
+};
+
+static void __init at91_add_device_tc(void)
+{
+ /* this chip has a separate clock and irq for each TC channel */
+ at91_clock_associate("tc0_clk", &at572d940hf_tcb_device.dev, "t0_clk");
+ at91_clock_associate("tc1_clk", &at572d940hf_tcb_device.dev, "t1_clk");
+ at91_clock_associate("tc2_clk", &at572d940hf_tcb_device.dev, "t2_clk");
+ platform_device_register(&at572d940hf_tcb_device);
+}
+#else
+static void __init at91_add_device_tc(void) { }
+#endif
+
+
+/* --------------------------------------------------------------------
+ * RTT
+ * -------------------------------------------------------------------- */
+
+static struct resource rtt_resources[] = {
+ {
+ .start = AT91_BASE_SYS + AT91_RTT,
+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at572d940hf_rtt_device = {
+ .name = "at91_rtt",
+ .id = 0,
+ .resource = rtt_resources,
+ .num_resources = ARRAY_SIZE(rtt_resources),
+};
+
+static void __init at91_add_device_rtt(void)
+{
+ platform_device_register(&at572d940hf_rtt_device);
+}
+
+
+/* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
+static struct platform_device at572d940hf_wdt_device = {
+ .name = "at91_wdt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+ platform_device_register(&at572d940hf_wdt_device);
+}
+#else
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+ [0] = {
+ .start = AT91_VA_BASE_SYS + AT91_DBGU,
+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_ID_SYS,
+ .end = AT91_ID_SYS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data dbgu_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at572d940hf_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
+ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
+}
+
+static struct resource uart0_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_US0,
+ .end = AT572D940HF_BASE_US0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_US0,
+ .end = AT572D940HF_ID_US0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart0_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at572d940hf_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PA8, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PA10, 0); /* RTS0 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PA9, 0); /* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_US1,
+ .end = AT572D940HF_BASE_US1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_US1,
+ .end = AT572D940HF_ID_US1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart1_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at572d940hf_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PC10, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PC9 , 0); /* RXD1 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PC12, 0); /* RTS1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_US2,
+ .end = AT572D940HF_BASE_US2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_US2,
+ .end = AT572D940HF_ID_US2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart2_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at572d940hf_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PC15, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PC14, 0); /* RXD2 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PC17, 0); /* RTS2 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PC16, 0); /* CTS2 */
+}
+
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+struct platform_device *atmel_default_console_device; /* the serial console device */
+
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at572d940hf_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT572D940HF_ID_US0:
+ pdev = &at572d940hf_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT572D940HF_ID_US1:
+ pdev = &at572d940hf_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT572D940HF_ID_US2:
+ pdev = &at572d940hf_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+}
+
+void __init at91_add_device_serial(void)
+{
+ int i;
+
+ for (i = 0; i < ATMEL_MAX_UART; i++) {
+ if (at91_uarts[i])
+ platform_device_register(at91_uarts[i]);
+ }
+
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+#else
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * mAgic
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_MAGICV
+static struct resource mAgic_resources[] = {
+ {
+ .start = AT91_MAGIC_PM_BASE,
+ .end = AT91_MAGIC_PM_BASE + AT91_MAGIC_PM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = AT91_MAGIC_DM_I_BASE,
+ .end = AT91_MAGIC_DM_I_BASE + AT91_MAGIC_DM_I_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = AT91_MAGIC_DM_F_BASE,
+ .end = AT91_MAGIC_DM_F_BASE + AT91_MAGIC_DM_F_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = AT91_MAGIC_DM_DB_BASE,
+ .end = AT91_MAGIC_DM_DB_BASE + AT91_MAGIC_DM_DB_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = AT91_MAGIC_REGS_BASE,
+ .end = AT91_MAGIC_REGS_BASE + AT91_MAGIC_REGS_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = AT91_MAGIC_EXTPAGE_BASE,
+ .end = AT91_MAGIC_EXTPAGE_BASE + AT91_MAGIC_EXTPAGE_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = AT572D940HF_ID_MSIRQ0,
+ .end = AT572D940HF_ID_MSIRQ0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AT572D940HF_ID_MHALT,
+ .end = AT572D940HF_ID_MHALT,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AT572D940HF_ID_MEXC,
+ .end = AT572D940HF_ID_MEXC,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AT572D940HF_ID_MEDMA,
+ .end = AT572D940HF_ID_MEDMA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mAgic_device = {
+ .name = "mAgic",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(mAgic_resources),
+ .resource = mAgic_resources,
+};
+
+void __init at91_add_device_mAgic(void)
+{
+ platform_device_register(&mAgic_device);
+}
+#else
+void __init at91_add_device_mAgic(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+ at91_add_device_rtt();
+ at91_add_device_watchdog();
+ at91_add_device_tc();
+ return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/board-at572d940hf_ek.c
+ *
+ * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com>
+ * Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ds1305.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init eb_map_io(void)
+{
+ /* Initialize processor: 12.500 MHz crystal */
+ at572d940hf_initialize(12000000);
+
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx & Tx only) */
+ at91_register_uart(AT572D940HF_ID_US0, 1, 0);
+
+ /* USART1 on ttyS2. (Rx & Tx only) */
+ at91_register_uart(AT572D940HF_ID_US1, 2, 0);
+
+ /* USART2 on ttyS3. (Tx & Rx only */
+ at91_register_uart(AT572D940HF_ID_US2, 3, 0);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init eb_init_irq(void)
+{
+ at572d940hf_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host Port
+ */
+static struct at91_usbh_data __initdata eb_usbh_data = {
+ .ports = 2,
+};
+
+
+/*
+ * USB Device Port
+ */
+static struct at91_udc_data __initdata eb_udc_data = {
+ .vbus_pin = 0, /* no VBUS detection,UDC always on */
+ .pullup_pin = 0, /* pull-up driven by UDC */
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata eb_mmc_data = {
+ .wire4 = 1,
+/* .det_pin = ... not connected */
+/* .wp_pin = ... not connected */
+/* .vcc_pin = ... not connected */
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata eb_eth_data = {
+ .phy_irq_pin = AT91_PIN_PB25,
+ .is_rmii = 1,
+};
+
+/*
+ * NOR flash
+ */
+
+static struct mtd_partition eb_nor_partitions[] = {
+ {
+ .name = "Raw Environment",
+ .offset = 0,
+ .size = SZ_4M,
+ .mask_flags = 0,
+ },
+ {
+ .name = "OS FS",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 3 * SZ_1M,
+ .mask_flags = 0,
+ },
+ {
+ .name = "APP FS",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ },
+};
+
+static void nor_flash_set_vpp(struct map_info* mi, int i) {
+};
+
+static struct physmap_flash_data nor_flash_data = {
+ .width = 4,
+ .parts = eb_nor_partitions,
+ .nr_parts = ARRAY_SIZE(eb_nor_partitions),
+ .set_vpp = nor_flash_set_vpp,
+};
+
+static struct resource nor_flash_resources[] = {
+ {
+ .start = AT91_CHIPSELECT_0,
+ .end = AT91_CHIPSELECT_0 + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &nor_flash_data,
+ },
+ .resource = nor_flash_resources,
+ .num_resources = ARRAY_SIZE(nor_flash_resources),
+};
+
+static struct sam9_smc_config __initdata eb_nor_smc_config = {
+ .ncs_read_setup = 1,
+ .nrd_setup = 1,
+ .ncs_write_setup = 1,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 7,
+ .nrd_pulse = 7,
+ .ncs_write_pulse = 7,
+ .nwe_pulse = 7,
+
+ .read_cycle = 9,
+ .write_cycle = 9,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_32,
+ .tdf_cycles = 1,
+};
+
+static void __init eb_add_device_nor(void)
+{
+ /* configure chip-select 0 (NOR) */
+ sam9_smc_configure(0, &eb_nor_smc_config);
+ platform_device_register(&nor_flash);
+}
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata eb_nand_partition[] = {
+ {
+ .name = "Partition 1",
+ .offset = 0,
+ .size = SZ_16M,
+ },
+ {
+ .name = "Partition 2",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(eb_nand_partition);
+ return eb_nand_partition;
+}
+
+static struct atmel_nand_data __initdata eb_nand_data = {
+ .ale = 22,
+ .cle = 21,
+/* .det_pin = ... not connected */
+/* .rdy_pin = AT91_PIN_PC16, */
+ .enable_pin = AT91_PIN_PA15,
+ .partition_info = nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+ .bus_width_16 = 1,
+#else
+ .bus_width_16 = 0,
+#endif
+};
+
+static struct sam9_smc_config __initdata eb_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 0,
+ .ncs_write_setup = 1,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 3,
+ .nrd_pulse = 3,
+ .ncs_write_pulse = 3,
+ .nwe_pulse = 3,
+
+ .read_cycle = 5,
+ .write_cycle = 5,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+ .tdf_cycles = 12,
+};
+
+static void __init eb_add_device_nand(void)
+{
+ /* setup bus-width (8 or 16) */
+ if (eb_nand_data.bus_width_16)
+ eb_nand_smc_config.mode |= AT91_SMC_DBW_16;
+ else
+ eb_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &eb_nand_smc_config);
+
+ at91_add_device_nand(&eb_nand_data);
+}
+
+
+/*
+ * SPI devices
+ */
+static struct resource rtc_resources[] = {
+ [0] = {
+ .start = AT572D940HF_ID_IRQ1,
+ .end = AT572D940HF_ID_IRQ1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct ds1305_platform_data ds1306_data = {
+ .is_ds1306 = true,
+ .en_1hz = false,
+};
+
+static struct spi_board_info eb_spi_devices[] = {
+ { /* RTC Dallas DS1306 */
+ .modalias = "rtc-ds1305",
+ .chip_select = 3,
+ .mode = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA,
+ .max_speed_hz = 500000,
+ .bus_num = 0,
+ .irq = AT572D940HF_ID_IRQ1,
+ .platform_data = (void *) &ds1306_data,
+ },
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+ { /* Dataflash card */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+#endif
+};
+
+static void __init eb_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* USB Host */
+ at91_add_device_usbh(&eb_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&eb_udc_data);
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+ /* NOR */
+ eb_add_device_nor();
+ /* NAND */
+ eb_add_device_nand();
+ /* SPI */
+ at91_add_device_spi(eb_spi_devices, ARRAY_SIZE(eb_spi_devices));
+ /* MMC */
+ at91_add_device_mmc(0, &eb_mmc_data);
+ /* Ethernet */
+ at91_add_device_eth(&eb_eth_data);
+ /* mAgic */
+ at91_add_device_mAgic();
+}
+
+MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB")
+ /* Maintainer: Atmel <costa.antonior@gmail.com> */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = eb_map_io,
+ .init_irq = eb_init_irq,
+ .init_machine = eb_board_init,
+MACHINE_END
#include <mach/cpu.h>
#include "clock.h"
+#include "generic.h"
/*
at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() ||
cpu_is_at91sam9263() || cpu_is_at91sam9g20() ||
- cpu_is_at91sam9g10()) {
+ cpu_is_at91sam9g10() || cpu_is_at572d940hf()) {
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
udpck.pmc_mask = AT91SAM926x_PMC_UDP;
} else if (cpu_is_at91cap9()) {
/*
* USB HS clock init
*/
- if (cpu_has_utmi())
+ if (cpu_has_utmi()) {
/*
* multiplier is hard-wired to 40
* (obtain the USB High Speed 480 MHz when input is 12 MHz)
*/
utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
+ }
/*
* USB FS clock init
mck.rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ?
freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
} else {
- mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
+ mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
}
/* Register the PMC's standard clocks */
struct clk *parent;
u32 pmc_mask;
void (*mode)(struct clk *, int);
- unsigned id:2; /* PCK0..3, or 32k/main/a/b */
+ unsigned id:3; /* PCK0..4, or 32k/main/a/b */
unsigned type; /* clock type */
u16 users;
};
extern void __init at91sam9g45_initialize(unsigned long main_clock);
extern void __init at91x40_initialize(unsigned long main_clock);
extern void __init at91cap9_initialize(unsigned long main_clock);
+extern void __init at572d940hf_initialize(unsigned long main_clock);
/* Interrupts */
extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
extern void __init at91sam9g45_init_interrupts(unsigned int priority[]);
extern void __init at91x40_init_interrupts(unsigned int priority[]);
extern void __init at91cap9_init_interrupts(unsigned int priority[]);
+extern void __init at572d940hf_init_interrupts(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[]);
/* Timer */
--- /dev/null
+/*
+ * include/mach/at572d940hf.h
+ *
+ * Antonio R. Costa <costa.antonior@gmail.com>
+ * Copyright (C) 2008 Atmel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef AT572D940HF_H
+#define AT572D940HF_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripherals */
+#define AT572D940HF_ID_PIOA 2 /* Parallel IO Controller A */
+#define AT572D940HF_ID_PIOB 3 /* Parallel IO Controller B */
+#define AT572D940HF_ID_PIOC 4 /* Parallel IO Controller C */
+#define AT572D940HF_ID_EMAC 5 /* MACB ethernet controller */
+#define AT572D940HF_ID_US0 6 /* USART 0 */
+#define AT572D940HF_ID_US1 7 /* USART 1 */
+#define AT572D940HF_ID_US2 8 /* USART 2 */
+#define AT572D940HF_ID_MCI 9 /* Multimedia Card Interface */
+#define AT572D940HF_ID_UDP 10 /* USB Device Port */
+#define AT572D940HF_ID_TWI0 11 /* Two-Wire Interface 0 */
+#define AT572D940HF_ID_SPI0 12 /* Serial Peripheral Interface 0 */
+#define AT572D940HF_ID_SPI1 13 /* Serial Peripheral Interface 1 */
+#define AT572D940HF_ID_SSC0 14 /* Serial Synchronous Controller 0 */
+#define AT572D940HF_ID_SSC1 15 /* Serial Synchronous Controller 1 */
+#define AT572D940HF_ID_SSC2 16 /* Serial Synchronous Controller 2 */
+#define AT572D940HF_ID_TC0 17 /* Timer Counter 0 */
+#define AT572D940HF_ID_TC1 18 /* Timer Counter 1 */
+#define AT572D940HF_ID_TC2 19 /* Timer Counter 2 */
+#define AT572D940HF_ID_UHP 20 /* USB Host port */
+#define AT572D940HF_ID_SSC3 21 /* Serial Synchronous Controller 3 */
+#define AT572D940HF_ID_TWI1 22 /* Two-Wire Interface 1 */
+#define AT572D940HF_ID_CAN0 23 /* CAN Controller 0 */
+#define AT572D940HF_ID_CAN1 24 /* CAN Controller 1 */
+#define AT572D940HF_ID_MHALT 25 /* mAgicV HALT line */
+#define AT572D940HF_ID_MSIRQ0 26 /* mAgicV SIRQ0 line */
+#define AT572D940HF_ID_MEXC 27 /* mAgicV exception line */
+#define AT572D940HF_ID_MEDMA 28 /* mAgicV end of DMA line */
+#define AT572D940HF_ID_IRQ0 29 /* External Interrupt Source (IRQ0) */
+#define AT572D940HF_ID_IRQ1 30 /* External Interrupt Source (IRQ1) */
+#define AT572D940HF_ID_IRQ2 31 /* External Interrupt Source (IRQ2) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT572D940HF_BASE_TCB 0xfffa0000
+#define AT572D940HF_BASE_TC0 0xfffa0000
+#define AT572D940HF_BASE_TC1 0xfffa0040
+#define AT572D940HF_BASE_TC2 0xfffa0080
+#define AT572D940HF_BASE_UDP 0xfffa4000
+#define AT572D940HF_BASE_MCI 0xfffa8000
+#define AT572D940HF_BASE_TWI0 0xfffac000
+#define AT572D940HF_BASE_US0 0xfffb0000
+#define AT572D940HF_BASE_US1 0xfffb4000
+#define AT572D940HF_BASE_US2 0xfffb8000
+#define AT572D940HF_BASE_SSC0 0xfffbc000
+#define AT572D940HF_BASE_SSC1 0xfffc0000
+#define AT572D940HF_BASE_SSC2 0xfffc4000
+#define AT572D940HF_BASE_SPI0 0xfffc8000
+#define AT572D940HF_BASE_SPI1 0xfffcc000
+#define AT572D940HF_BASE_SSC3 0xfffd0000
+#define AT572D940HF_BASE_TWI1 0xfffd4000
+#define AT572D940HF_BASE_EMAC 0xfffd8000
+#define AT572D940HF_BASE_CAN0 0xfffdc000
+#define AT572D940HF_BASE_CAN1 0xfffe0000
+#define AT91_BASE_SYS 0xffffea00
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+
+#define AT91_USART0 AT572D940HF_ID_US0
+#define AT91_USART1 AT572D940HF_ID_US1
+#define AT91_USART2 AT572D940HF_ID_US2
+
+
+/*
+ * Internal Memory.
+ */
+#define AT572D940HF_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+#define AT572D940HF_SRAM_SIZE (48 * SZ_1K) /* Internal SRAM size (48Kb) */
+
+#define AT572D940HF_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT572D940HF_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
+
+#define AT572D940HF_UHP_BASE 0x00500000 /* USB Host controller */
+
+
+#endif
--- /dev/null
+/*
+ * include/mach//at572d940hf_matrix.h
+ *
+ * Antonio R. Costa <costa.antonior@gmail.com>
+ * Copyright (C) 2008 Atmel
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef AT572D940HF_MATRIX_H
+#define AT572D940HF_MATRIX_H
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (0x7 << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+
+#define AT91_MATRIX_SFR0 (AT91_MATRIX + 0x110) /* Special Function Register 0 */
+#define AT91_MATRIX_SFR1 (AT91_MATRIX + 0x114) /* Special Function Register 1 */
+#define AT91_MATRIX_SFR2 (AT91_MATRIX + 0x118) /* Special Function Register 2 */
+#define AT91_MATRIX_SFR3 (AT91_MATRIX + 0x11C) /* Special Function Register 3 */
+#define AT91_MATRIX_SFR4 (AT91_MATRIX + 0x120) /* Special Function Register 4 */
+#define AT91_MATRIX_SFR5 (AT91_MATRIX + 0x124) /* Special Function Register 5 */
+#define AT91_MATRIX_SFR6 (AT91_MATRIX + 0x128) /* Special Function Register 6 */
+#define AT91_MATRIX_SFR7 (AT91_MATRIX + 0x12C) /* Special Function Register 7 */
+#define AT91_MATRIX_SFR8 (AT91_MATRIX + 0x130) /* Special Function Register 8 */
+#define AT91_MATRIX_SFR9 (AT91_MATRIX + 0x134) /* Special Function Register 9 */
+#define AT91_MATRIX_SFR10 (AT91_MATRIX + 0x138) /* Special Function Register 10 */
+#define AT91_MATRIX_SFR11 (AT91_MATRIX + 0x13C) /* Special Function Register 11 */
+#define AT91_MATRIX_SFR12 (AT91_MATRIX + 0x140) /* Special Function Register 12 */
+#define AT91_MATRIX_SFR13 (AT91_MATRIX + 0x144) /* Special Function Register 13 */
+#define AT91_MATRIX_SFR14 (AT91_MATRIX + 0x148) /* Special Function Register 14 */
+#define AT91_MATRIX_SFR15 (AT91_MATRIX + 0x14C) /* Special Function Register 15 */
+
+
+/*
+ * The following registers / bits are not defined in the Datasheet (Revision A)
+ */
+
+#define AT91_MATRIX_TCR (AT91_MATRIX + 0x100) /* TCM Configuration Register */
+#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
+#define AT91_MATRIX_ITCM_0 (0 << 0)
+#define AT91_MATRIX_ITCM_16 (5 << 0)
+#define AT91_MATRIX_ITCM_32 (6 << 0)
+#define AT91_MATRIX_ITCM_64 (7 << 0)
+#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
+#define AT91_MATRIX_DTCM_0 (0 << 4)
+#define AT91_MATRIX_DTCM_16 (5 << 4)
+#define AT91_MATRIX_DTCM_32 (6 << 4)
+#define AT91_MATRIX_DTCM_64 (7 << 4)
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+
+#endif
#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */
#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */
+#define AT91_PMC_PCK4 (1 << 12) /* Programmable Clock 4 [AT572D940HF only] */
#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */
#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */
extern void __init at91_add_device_eth(struct at91_eth_data *data);
#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \
- || defined(CONFIG_ARCH_AT91SAM9G45)
+ || defined(CONFIG_ARCH_AT91SAM9G45) || defined(CONFIG_ARCH_AT572D940HF)
#define eth_platform_data at91_eth_data
#endif
extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
+ /* AT572D940HF DSP */
+extern void __init at91_add_device_mAgic(void);
+
/* FIXME: this needs a better location, but gets stuff building again */
extern int at91_suspend_entering_slow_clock(void);
#define ARCH_ID_AT91SAM9XE256 0x329a93a0
#define ARCH_ID_AT91SAM9XE512 0x329aa3a0
+#define ARCH_ID_AT572D940HF 0x0e0303e0
+
#define ARCH_ID_AT91M40800 0x14080044
#define ARCH_ID_AT91R40807 0x44080746
#define ARCH_ID_AT91M40807 0x14080745
#define cpu_is_at91cap9_revC() (0)
#endif
+#ifdef CONFIG_ARCH_AT572D940HF
+#define cpu_is_at572d940hf() (at91_cpu_identify() == ARCH_ID_AT572D940HF)
+#else
+#define cpu_is_at572d940hf() (0)
+#endif
+
/*
* Since this is ARM, we will never run on any AVR32 CPU. But these
* definitions may reduce clutter in common drivers.
#include <mach/at91cap9.h>
#elif defined(CONFIG_ARCH_AT91X40)
#include <mach/at91x40.h>
+#elif defined(CONFIG_ARCH_AT572D940HF)
+#include <mach/at572d940hf.h>
#else
#error "Unsupported AT91 processor"
#endif
#define AT91X40_MASTER_CLOCK 40000000
#define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK)
+#elif defined(CONFIG_ARCH_AT572D940HF)
+
+#define AT572D940HF_MASTER_CLOCK 80000000
+#define CLOCK_TICK_RATE (AT572D940HF_MASTER_CLOCK/16)
+
#endif
#endif
Say 'Y' here if you want your kernel to support the
Contec Micro9-Slim board.
+config MACH_SIM_ONE
+ bool "Support Simplemachines Sim.One board"
+ depends on EP93XX_SDCE0_PHYS_OFFSET
+ help
+ Say 'Y' here if you want your kernel to support the
+ Simplemachines Sim.One board.
+
+config MACH_SNAPPER_CL15
+ bool "Support Bluewater Systems Snapper CL15 Module"
+ depends on EP93XX_SDCE0_PHYS_OFFSET
+ help
+ Say 'Y' here if you want your kernel to support the Bluewater
+ Systems Snapper CL15 Module.
+
config MACH_TS72XX
bool "Support Technologic Systems TS-72xx SBC"
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o
obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o
obj-$(CONFIG_MACH_MICRO9) += micro9.o
+obj-$(CONFIG_MACH_SIM_ONE) += simone.o
+obj-$(CONFIG_MACH_SNAPPER_CL15) += snappercl15.o
obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
* your option) any later version.
*/
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/err.h>
u32 value;
int i;
- value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
- if (!(value & 0x00800000)) { /* PLL1 bypassed? */
+ /* Determine the bootloader configured pll1 rate */
+ value = __raw_readl(EP93XX_SYSCON_CLKSET1);
+ if (!(value & EP93XX_SYSCON_CLKSET1_NBYP1))
clk_pll1.rate = clk_xtali.rate;
- } else {
+ else
clk_pll1.rate = calc_pll_rate(value);
- }
+
+ /* Initialize the pll1 derived clocks */
clk_f.rate = clk_pll1.rate / fclk_divisors[(value >> 25) & 0x7];
clk_h.rate = clk_pll1.rate / hclk_divisors[(value >> 20) & 0x7];
clk_p.rate = clk_h.rate / pclk_divisors[(value >> 18) & 0x3];
ep93xx_dma_clock_init();
- value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
- if (!(value & 0x00080000)) { /* PLL2 bypassed? */
+ /* Determine the bootloader configured pll2 rate */
+ value = __raw_readl(EP93XX_SYSCON_CLKSET2);
+ if (!(value & EP93XX_SYSCON_CLKSET2_NBYP2))
clk_pll2.rate = clk_xtali.rate;
- } else if (value & 0x00040000) { /* PLL2 enabled? */
+ else if (value & EP93XX_SYSCON_CLKSET2_PLL2_EN)
clk_pll2.rate = calc_pll_rate(value);
- } else {
+ else
clk_pll2.rate = 0;
- }
+
+ /* Initialize the pll2 derived clocks */
clk_usb_host.rate = clk_pll2.rate / (((value >> 28) & 0xf) + 1);
- printk(KERN_INFO "ep93xx: PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
+ pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
clk_pll1.rate / 1000000, clk_pll2.rate / 1000000);
- printk(KERN_INFO "ep93xx: FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
+ pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
clk_f.rate / 1000000, clk_h.rate / 1000000,
clk_p.rate / 1000000);
* your option) any later version.
*/
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/timex.h>
+#include <linux/irq.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
* to use this timer for something else. We also use timer 4 for keeping
* track of lost jiffies.
*/
-static unsigned int last_jiffy_time;
-
+#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
+#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
+#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
+#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08)
+#define EP93XX_TIMER123_CONTROL_ENABLE (1 << 7)
+#define EP93XX_TIMER123_CONTROL_MODE (1 << 6)
+#define EP93XX_TIMER123_CONTROL_CLKSEL (1 << 3)
+#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c)
+#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20)
+#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24)
+#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28)
+#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c)
+#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60)
+#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64)
+#define EP93XX_TIMER4_VALUE_HIGH_ENABLE (1 << 8)
+#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80)
+#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84)
+#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
+#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
+
+#define EP93XX_TIMER123_CLOCK 508469
+#define EP93XX_TIMER4_CLOCK 983040
+
+#define TIMER1_RELOAD ((EP93XX_TIMER123_CLOCK / HZ) - 1)
#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ)
+static unsigned int last_jiffy_time;
+
static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
{
+ /* Writing any value clears the timer interrupt */
__raw_writel(1, EP93XX_TIMER1_CLEAR);
+
+ /* Recover lost jiffies */
while ((signed long)
(__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time)
>= TIMER4_TICKS_PER_JIFFY) {
static void __init ep93xx_timer_init(void)
{
+ u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
+ EP93XX_TIMER123_CONTROL_CLKSEL;
+
/* Enable periodic HZ timer. */
- __raw_writel(0x48, EP93XX_TIMER1_CONTROL);
- __raw_writel((508469 / HZ) - 1, EP93XX_TIMER1_LOAD);
- __raw_writel(0xc8, EP93XX_TIMER1_CONTROL);
+ __raw_writel(tmode, EP93XX_TIMER1_CONTROL);
+ __raw_writel(TIMER1_RELOAD, EP93XX_TIMER1_LOAD);
+ __raw_writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE,
+ EP93XX_TIMER1_CONTROL);
/* Enable lost jiffy timer. */
- __raw_writel(0x100, EP93XX_TIMER4_VALUE_HIGH);
+ __raw_writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
+ EP93XX_TIMER4_VALUE_HIGH);
setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
}
};
-/*************************************************************************
- * GPIO handling for EP93xx
- *************************************************************************/
-static unsigned char gpio_int_unmasked[3];
-static unsigned char gpio_int_enabled[3];
-static unsigned char gpio_int_type1[3];
-static unsigned char gpio_int_type2[3];
-static unsigned char gpio_int_debounce[3];
-
-/* Port ordering is: A B F */
-static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c };
-static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 };
-static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 };
-static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 };
-static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 };
-
-void ep93xx_gpio_update_int_params(unsigned port)
-{
- BUG_ON(port > 2);
-
- __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port]));
-
- __raw_writeb(gpio_int_type2[port],
- EP93XX_GPIO_REG(int_type2_register_offset[port]));
-
- __raw_writeb(gpio_int_type1[port],
- EP93XX_GPIO_REG(int_type1_register_offset[port]));
-
- __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port],
- EP93XX_GPIO_REG(int_en_register_offset[port]));
-}
-
-void ep93xx_gpio_int_mask(unsigned line)
-{
- gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
-}
-
-void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
-{
- int line = irq_to_gpio(irq);
- int port = line >> 3;
- int port_mask = 1 << (line & 7);
-
- if (enable)
- gpio_int_debounce[port] |= port_mask;
- else
- gpio_int_debounce[port] &= ~port_mask;
-
- __raw_writeb(gpio_int_debounce[port],
- EP93XX_GPIO_REG(int_debounce_register_offset[port]));
-}
-EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
-
/*************************************************************************
* EP93xx IRQ handling
*************************************************************************/
-static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- unsigned char status;
- int i;
-
- status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
- for (i = 0; i < 8; i++) {
- if (status & (1 << i)) {
- int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i;
- generic_handle_irq(gpio_irq);
- }
- }
-
- status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
- for (i = 0; i < 8; i++) {
- if (status & (1 << i)) {
- int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
- generic_handle_irq(gpio_irq);
- }
- }
-}
-
-static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- /*
- * map discontiguous hw irq range to continous sw irq range:
- *
- * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7})
- */
- int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */
- int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx;
-
- generic_handle_irq(gpio_irq);
-}
-
-static void ep93xx_gpio_irq_ack(unsigned int irq)
-{
- int line = irq_to_gpio(irq);
- int port = line >> 3;
- int port_mask = 1 << (line & 7);
-
- if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
- gpio_int_type2[port] ^= port_mask; /* switch edge direction */
- ep93xx_gpio_update_int_params(port);
- }
-
- __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
-}
-
-static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
-{
- int line = irq_to_gpio(irq);
- int port = line >> 3;
- int port_mask = 1 << (line & 7);
-
- if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
- gpio_int_type2[port] ^= port_mask; /* switch edge direction */
-
- gpio_int_unmasked[port] &= ~port_mask;
- ep93xx_gpio_update_int_params(port);
-
- __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
-}
-
-static void ep93xx_gpio_irq_mask(unsigned int irq)
-{
- int line = irq_to_gpio(irq);
- int port = line >> 3;
-
- gpio_int_unmasked[port] &= ~(1 << (line & 7));
- ep93xx_gpio_update_int_params(port);
-}
-
-static void ep93xx_gpio_irq_unmask(unsigned int irq)
-{
- int line = irq_to_gpio(irq);
- int port = line >> 3;
-
- gpio_int_unmasked[port] |= 1 << (line & 7);
- ep93xx_gpio_update_int_params(port);
-}
-
-
-/*
- * gpio_int_type1 controls whether the interrupt is level (0) or
- * edge (1) triggered, while gpio_int_type2 controls whether it
- * triggers on low/falling (0) or high/rising (1).
- */
-static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
-{
- struct irq_desc *desc = irq_desc + irq;
- const int gpio = irq_to_gpio(irq);
- const int port = gpio >> 3;
- const int port_mask = 1 << (gpio & 7);
-
- gpio_direction_input(gpio);
-
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- gpio_int_type1[port] |= port_mask;
- gpio_int_type2[port] |= port_mask;
- desc->handle_irq = handle_edge_irq;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- gpio_int_type1[port] |= port_mask;
- gpio_int_type2[port] &= ~port_mask;
- desc->handle_irq = handle_edge_irq;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- gpio_int_type1[port] &= ~port_mask;
- gpio_int_type2[port] |= port_mask;
- desc->handle_irq = handle_level_irq;
- break;
- case IRQ_TYPE_LEVEL_LOW:
- gpio_int_type1[port] &= ~port_mask;
- gpio_int_type2[port] &= ~port_mask;
- desc->handle_irq = handle_level_irq;
- break;
- case IRQ_TYPE_EDGE_BOTH:
- gpio_int_type1[port] |= port_mask;
- /* set initial polarity based on current input level */
- if (gpio_get_value(gpio))
- gpio_int_type2[port] &= ~port_mask; /* falling */
- else
- gpio_int_type2[port] |= port_mask; /* rising */
- desc->handle_irq = handle_edge_irq;
- break;
- default:
- pr_err("ep93xx: failed to set irq type %d for gpio %d\n",
- type, gpio);
- return -EINVAL;
- }
-
- gpio_int_enabled[port] |= port_mask;
-
- desc->status &= ~IRQ_TYPE_SENSE_MASK;
- desc->status |= type & IRQ_TYPE_SENSE_MASK;
-
- ep93xx_gpio_update_int_params(port);
-
- return 0;
-}
-
-static struct irq_chip ep93xx_gpio_irq_chip = {
- .name = "GPIO",
- .ack = ep93xx_gpio_irq_ack,
- .mask_ack = ep93xx_gpio_irq_mask_ack,
- .mask = ep93xx_gpio_irq_mask,
- .unmask = ep93xx_gpio_irq_unmask,
- .set_type = ep93xx_gpio_irq_type,
-};
-
+extern void ep93xx_gpio_init_irq(void);
void __init ep93xx_init_irq(void)
{
- int gpio_irq;
-
vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
- for (gpio_irq = gpio_to_irq(0);
- gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
- set_irq_chip(gpio_irq, &ep93xx_gpio_irq_chip);
- set_irq_handler(gpio_irq, handle_level_irq);
- set_irq_flags(gpio_irq, IRQF_VALID);
- }
-
- set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler);
+ ep93xx_gpio_init_irq();
}
* CMOS driver.
*/
if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT)
- pr_warning("ep93xx: sda != EEDAT, open drain has no effect\n");
+ pr_warning("sda != EEDAT, open drain has no effect\n");
if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK)
- pr_warning("ep93xx: scl != EECLK, open drain has no effect\n");
+ pr_warning("scl != EECLK, open drain has no effect\n");
__raw_writel((data->sda_is_open_drain << 1) |
(data->scl_is_open_drain << 0),
* with this implementation.
*/
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/err.h>
switch (m2p_channel_state(ch)) {
case STATE_IDLE:
- pr_crit("m2p_irq: dma interrupt without a dma buffer\n");
+ pr_crit("dma interrupt without a dma buffer\n");
BUG();
break;
break;
case STATE_NEXT:
- pr_crit("m2p_irq: dma interrupt while next\n");
+ pr_crit("dma interrupt while next\n");
BUG();
break;
}
}
}
+
+/*************************************************************************
+ * EDB93xx pwm
+ *************************************************************************/
+static void __init edb93xx_register_pwm(void)
+{
+ if (machine_is_edb9301() ||
+ machine_is_edb9302() || machine_is_edb9302a()) {
+ /* EP9301 and EP9302 only have pwm.1 (EGPIO14) */
+ ep93xx_register_pwm(0, 1);
+ } else if (machine_is_edb9307() || machine_is_edb9307a()) {
+ /* EP9307 only has pwm.0 (PWMOUT) */
+ ep93xx_register_pwm(1, 0);
+ } else {
+ /* EP9312 and EP9315 have both */
+ ep93xx_register_pwm(1, 1);
+ }
+}
+
+
static void __init edb93xx_init_machine(void)
{
ep93xx_init_devices();
edb93xx_register_flash();
ep93xx_register_eth(&edb93xx_eth_data, 1);
edb93xx_register_i2c();
+ edb93xx_register_pwm();
}
* published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/seq_file.h>
#include <mach/hardware.h>
+/*************************************************************************
+ * GPIO handling for EP93xx
+ *************************************************************************/
+static unsigned char gpio_int_unmasked[3];
+static unsigned char gpio_int_enabled[3];
+static unsigned char gpio_int_type1[3];
+static unsigned char gpio_int_type2[3];
+static unsigned char gpio_int_debounce[3];
+
+/* Port ordering is: A B F */
+static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c };
+static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 };
+static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 };
+static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 };
+static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 };
+
+void ep93xx_gpio_update_int_params(unsigned port)
+{
+ BUG_ON(port > 2);
+
+ __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port]));
+
+ __raw_writeb(gpio_int_type2[port],
+ EP93XX_GPIO_REG(int_type2_register_offset[port]));
+
+ __raw_writeb(gpio_int_type1[port],
+ EP93XX_GPIO_REG(int_type1_register_offset[port]));
+
+ __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port],
+ EP93XX_GPIO_REG(int_en_register_offset[port]));
+}
+
+void ep93xx_gpio_int_mask(unsigned line)
+{
+ gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
+}
+
+void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
+{
+ int line = irq_to_gpio(irq);
+ int port = line >> 3;
+ int port_mask = 1 << (line & 7);
+
+ if (enable)
+ gpio_int_debounce[port] |= port_mask;
+ else
+ gpio_int_debounce[port] &= ~port_mask;
+
+ __raw_writeb(gpio_int_debounce[port],
+ EP93XX_GPIO_REG(int_debounce_register_offset[port]));
+}
+EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
+
+static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned char status;
+ int i;
+
+ status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
+ for (i = 0; i < 8; i++) {
+ if (status & (1 << i)) {
+ int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i;
+ generic_handle_irq(gpio_irq);
+ }
+ }
+
+ status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
+ for (i = 0; i < 8; i++) {
+ if (status & (1 << i)) {
+ int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
+ generic_handle_irq(gpio_irq);
+ }
+ }
+}
+
+static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ /*
+ * map discontiguous hw irq range to continous sw irq range:
+ *
+ * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7})
+ */
+ int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */
+ int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx;
+
+ generic_handle_irq(gpio_irq);
+}
+
+static void ep93xx_gpio_irq_ack(unsigned int irq)
+{
+ int line = irq_to_gpio(irq);
+ int port = line >> 3;
+ int port_mask = 1 << (line & 7);
+
+ if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
+ gpio_int_type2[port] ^= port_mask; /* switch edge direction */
+ ep93xx_gpio_update_int_params(port);
+ }
+
+ __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
+}
+
+static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
+{
+ int line = irq_to_gpio(irq);
+ int port = line >> 3;
+ int port_mask = 1 << (line & 7);
+
+ if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
+ gpio_int_type2[port] ^= port_mask; /* switch edge direction */
+
+ gpio_int_unmasked[port] &= ~port_mask;
+ ep93xx_gpio_update_int_params(port);
+
+ __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
+}
+
+static void ep93xx_gpio_irq_mask(unsigned int irq)
+{
+ int line = irq_to_gpio(irq);
+ int port = line >> 3;
+
+ gpio_int_unmasked[port] &= ~(1 << (line & 7));
+ ep93xx_gpio_update_int_params(port);
+}
+
+static void ep93xx_gpio_irq_unmask(unsigned int irq)
+{
+ int line = irq_to_gpio(irq);
+ int port = line >> 3;
+
+ gpio_int_unmasked[port] |= 1 << (line & 7);
+ ep93xx_gpio_update_int_params(port);
+}
+
+/*
+ * gpio_int_type1 controls whether the interrupt is level (0) or
+ * edge (1) triggered, while gpio_int_type2 controls whether it
+ * triggers on low/falling (0) or high/rising (1).
+ */
+static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
+{
+ struct irq_desc *desc = irq_desc + irq;
+ const int gpio = irq_to_gpio(irq);
+ const int port = gpio >> 3;
+ const int port_mask = 1 << (gpio & 7);
+
+ gpio_direction_input(gpio);
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ gpio_int_type1[port] |= port_mask;
+ gpio_int_type2[port] |= port_mask;
+ desc->handle_irq = handle_edge_irq;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ gpio_int_type1[port] |= port_mask;
+ gpio_int_type2[port] &= ~port_mask;
+ desc->handle_irq = handle_edge_irq;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ gpio_int_type1[port] &= ~port_mask;
+ gpio_int_type2[port] |= port_mask;
+ desc->handle_irq = handle_level_irq;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ gpio_int_type1[port] &= ~port_mask;
+ gpio_int_type2[port] &= ~port_mask;
+ desc->handle_irq = handle_level_irq;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ gpio_int_type1[port] |= port_mask;
+ /* set initial polarity based on current input level */
+ if (gpio_get_value(gpio))
+ gpio_int_type2[port] &= ~port_mask; /* falling */
+ else
+ gpio_int_type2[port] |= port_mask; /* rising */
+ desc->handle_irq = handle_edge_irq;
+ break;
+ default:
+ pr_err("failed to set irq type %d for gpio %d\n", type, gpio);
+ return -EINVAL;
+ }
+
+ gpio_int_enabled[port] |= port_mask;
+
+ desc->status &= ~IRQ_TYPE_SENSE_MASK;
+ desc->status |= type & IRQ_TYPE_SENSE_MASK;
+
+ ep93xx_gpio_update_int_params(port);
+
+ return 0;
+}
+
+static struct irq_chip ep93xx_gpio_irq_chip = {
+ .name = "GPIO",
+ .ack = ep93xx_gpio_irq_ack,
+ .mask_ack = ep93xx_gpio_irq_mask_ack,
+ .mask = ep93xx_gpio_irq_mask,
+ .unmask = ep93xx_gpio_irq_unmask,
+ .set_type = ep93xx_gpio_irq_type,
+};
+
+void __init ep93xx_gpio_init_irq(void)
+{
+ int gpio_irq;
+
+ for (gpio_irq = gpio_to_irq(0);
+ gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
+ set_irq_chip(gpio_irq, &ep93xx_gpio_irq_chip);
+ set_irq_handler(gpio_irq, handle_level_irq);
+ set_irq_flags(gpio_irq, IRQF_VALID);
+ }
+
+ set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler);
+}
+
+
+/*************************************************************************
+ * gpiolib interface for EP93xx on-chip GPIOs
+ *************************************************************************/
struct ep93xx_gpio_chip {
struct gpio_chip chip;
#define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip)
-/* From core.c */
-extern void ep93xx_gpio_int_mask(unsigned line);
-extern void ep93xx_gpio_update_int_params(unsigned port);
-
static int ep93xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
/* APB peripherals */
#define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000)
-#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
-#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
-#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
-#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08)
-#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c)
-#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20)
-#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24)
-#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28)
-#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c)
-#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60)
-#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64)
-#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80)
-#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84)
-#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
-#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000)
#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 (1<<16)
#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08)
#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c)
-#define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20)
-#define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24)
+#define EP93XX_SYSCON_CLKSET1 EP93XX_SYSCON_REG(0x20)
+#define EP93XX_SYSCON_CLKSET1_NBYP1 (1<<23)
+#define EP93XX_SYSCON_CLKSET2 EP93XX_SYSCON_REG(0x24)
+#define EP93XX_SYSCON_CLKSET2_NBYP2 (1<<19)
+#define EP93XX_SYSCON_CLKSET2_PLL2_EN (1<<18)
#define EP93XX_SYSCON_DEVCFG EP93XX_SYSCON_REG(0x80)
#define EP93XX_SYSCON_DEVCFG_SWRST (1<<31)
#define EP93XX_SYSCON_DEVCFG_D1ONG (1<<30)
--- /dev/null
+/*
+ * arch/arm/mach-ep93xx/simone.c
+ * Simplemachines Sim.One support.
+ *
+ * Copyright (C) 2010 Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * Based on the 2.6.24.7 support:
+ * Copyright (C) 2009 Simplemachines
+ * MMC support by Peter Ivanov <ivanovp@gmail.com>, 2007
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/fb.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data simone_flash_data = {
+ .width = 2,
+};
+
+static struct resource simone_flash_resource = {
+ .start = EP93XX_CS6_PHYS_BASE,
+ .end = EP93XX_CS6_PHYS_BASE + SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device simone_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .num_resources = 1,
+ .resource = &simone_flash_resource,
+ .dev = {
+ .platform_data = &simone_flash_data,
+ },
+};
+
+static struct ep93xx_eth_data simone_eth_data = {
+ .phy_id = 1,
+};
+
+static struct ep93xxfb_mach_info simone_fb_info = {
+ .num_modes = EP93XXFB_USE_MODEDB,
+ .bpp = 16,
+ .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
+};
+
+static struct i2c_gpio_platform_data simone_i2c_gpio_data = {
+ .sda_pin = EP93XX_GPIO_LINE_EEDAT,
+ .sda_is_open_drain = 0,
+ .scl_pin = EP93XX_GPIO_LINE_EECLK,
+ .scl_is_open_drain = 0,
+ .udelay = 0,
+ .timeout = 0,
+};
+
+static struct i2c_board_info __initdata simone_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("ds1337", 0x68),
+ },
+};
+
+static void __init simone_init_machine(void)
+{
+ ep93xx_init_devices();
+
+ platform_device_register(&simone_flash);
+ ep93xx_register_eth(&simone_eth_data, 1);
+ ep93xx_register_fb(&simone_fb_info);
+ ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info,
+ ARRAY_SIZE(simone_i2c_board_info));
+}
+
+MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
+/* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = simone_init_machine,
+MACHINE_END
--- /dev/null
+/*
+ * arch/arm/mach-ep93xx/snappercl15.c
+ * Bluewater Systems Snapper CL15 system module
+ *
+ * Copyright (C) 2009 Bluewater Systems Ltd
+ * Author: Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * NAND code adapted from driver by:
+ * Andre Renaud <andre@bluewatersys.com>
+ * James R. McKaskill
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/fb.h>
+
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+
+#include <mach/hardware.h>
+#include <mach/fb.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#define SNAPPERCL15_NAND_BASE (EP93XX_CS7_PHYS_BASE + SZ_16M)
+
+#define SNAPPERCL15_NAND_WPN (1 << 8) /* Write protect (active low) */
+#define SNAPPERCL15_NAND_ALE (1 << 9) /* Address latch */
+#define SNAPPERCL15_NAND_CLE (1 << 10) /* Command latch */
+#define SNAPPERCL15_NAND_CEN (1 << 11) /* Chip enable (active low) */
+#define SNAPPERCL15_NAND_RDY (1 << 14) /* Device ready */
+
+#define NAND_CTRL_ADDR(chip) (chip->IO_ADDR_W + 0x40)
+
+static void snappercl15_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd->priv;
+ static u16 nand_state = SNAPPERCL15_NAND_WPN;
+ u16 set;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ set = SNAPPERCL15_NAND_CEN | SNAPPERCL15_NAND_WPN;
+
+ if (ctrl & NAND_NCE)
+ set &= ~SNAPPERCL15_NAND_CEN;
+ if (ctrl & NAND_CLE)
+ set |= SNAPPERCL15_NAND_CLE;
+ if (ctrl & NAND_ALE)
+ set |= SNAPPERCL15_NAND_ALE;
+
+ nand_state &= ~(SNAPPERCL15_NAND_CEN |
+ SNAPPERCL15_NAND_CLE |
+ SNAPPERCL15_NAND_ALE);
+ nand_state |= set;
+ __raw_writew(nand_state, NAND_CTRL_ADDR(chip));
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ __raw_writew((cmd & 0xff) | nand_state, chip->IO_ADDR_W);
+}
+
+static int snappercl15_nand_dev_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ return !!(__raw_readw(NAND_CTRL_ADDR(chip)) & SNAPPERCL15_NAND_RDY);
+}
+
+static const char *snappercl15_nand_part_probes[] = {"cmdlinepart", NULL};
+
+static struct mtd_partition snappercl15_nand_parts[] = {
+ {
+ .name = "Kernel",
+ .offset = 0,
+ .size = SZ_2M,
+ },
+ {
+ .name = "Filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct platform_nand_data snappercl15_nand_data = {
+ .chip = {
+ .nr_chips = 1,
+ .part_probe_types = snappercl15_nand_part_probes,
+ .partitions = snappercl15_nand_parts,
+ .nr_partitions = ARRAY_SIZE(snappercl15_nand_parts),
+ .options = NAND_NO_AUTOINCR,
+ .chip_delay = 25,
+ },
+ .ctrl = {
+ .dev_ready = snappercl15_nand_dev_ready,
+ .cmd_ctrl = snappercl15_nand_cmd_ctrl,
+ },
+};
+
+static struct resource snappercl15_nand_resource[] = {
+ {
+ .start = SNAPPERCL15_NAND_BASE,
+ .end = SNAPPERCL15_NAND_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device snappercl15_nand_device = {
+ .name = "gen_nand",
+ .id = -1,
+ .dev.platform_data = &snappercl15_nand_data,
+ .resource = snappercl15_nand_resource,
+ .num_resources = ARRAY_SIZE(snappercl15_nand_resource),
+};
+
+static struct ep93xx_eth_data snappercl15_eth_data = {
+ .phy_id = 1,
+};
+
+static struct i2c_gpio_platform_data snappercl15_i2c_gpio_data = {
+ .sda_pin = EP93XX_GPIO_LINE_EEDAT,
+ .sda_is_open_drain = 0,
+ .scl_pin = EP93XX_GPIO_LINE_EECLK,
+ .scl_is_open_drain = 0,
+ .udelay = 0,
+ .timeout = 0,
+};
+
+static struct i2c_board_info __initdata snappercl15_i2c_data[] = {
+ {
+ /* Audio codec */
+ I2C_BOARD_INFO("tlv320aic23", 0x1a),
+ },
+};
+
+static struct ep93xxfb_mach_info snappercl15_fb_info = {
+ .num_modes = EP93XXFB_USE_MODEDB,
+ .bpp = 16,
+};
+
+static void __init snappercl15_init_machine(void)
+{
+ ep93xx_init_devices();
+ ep93xx_register_eth(&snappercl15_eth_data, 1);
+ ep93xx_register_i2c(&snappercl15_i2c_gpio_data, snappercl15_i2c_data,
+ ARRAY_SIZE(snappercl15_i2c_data));
+ ep93xx_register_fb(&snappercl15_fb_info);
+ platform_device_register(&snappercl15_nand_device);
+}
+
+MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
+ /* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = snappercl15_init_machine,
+MACHINE_END
clocksource_register(&clocksource_ixp4xx);
}
+/*
+ * sched_clock()
+ */
+unsigned long long sched_clock(void)
+{
+ cycle_t cyc = ixp4xx_get_cycles(NULL);
+ struct clocksource *cs = &clocksource_ixp4xx;
+
+ return clocksource_cyc2ns(cyc, cs->mult, cs->shift);
+}
+
/*
* clockevents
*/
--- /dev/null
+if ARCH_NUC93X
+
+config CPU_NUC932
+ bool
+ help
+ Support for NUC932 of Nuvoton NUC93X CPUs.
+
+menu "NUC932 Machines"
+
+config MACH_NUC932EVB
+ bool "Nuvoton NUC932 Evaluation Board"
+ default y
+ select CPU_NUC932
+ help
+ Say Y here if you are using the Nuvoton NUC932EVB
+
+endmenu
+
+endif
--- /dev/null
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y := irq.o time.o dev.o cpu.o clock.o
+# NUC932 CPU support files
+
+obj-$(CONFIG_CPU_NUC932) += nuc932.o
+
+# machine support
+
+obj-$(CONFIG_MACH_NUC932EVB) += mach-nuc932evb.o
--- /dev/null
+zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+
--- /dev/null
+/*
+ * linux/arch/arm/mach-nuc93x/clock.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#include "clock.h"
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (clk->enabled++ == 0)
+ (clk->enable)(clk, 1);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ WARN_ON(clk->enabled == 0);
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (--clk->enabled == 0)
+ (clk->enable)(clk, 0);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return 27000000;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void nuc93x_clk_enable(struct clk *clk, int enable)
+{
+ unsigned int clocks = clk->cken;
+ unsigned long clken;
+
+ clken = __raw_readl(NUC93X_VA_CLKPWR);
+
+ if (enable)
+ clken |= clocks;
+ else
+ clken &= ~clocks;
+
+ __raw_writel(clken, NUC93X_VA_CLKPWR);
+}
+
+void clks_register(struct clk_lookup *clks, size_t num)
+{
+ int i;
+
+ for (i = 0; i < num; i++)
+ clkdev_add(&clks[i]);
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-nuc93x/clock.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <asm/clkdev.h>
+
+void nuc93x_clk_enable(struct clk *clk, int enable);
+void clks_register(struct clk_lookup *clks, size_t num);
+
+struct clk {
+ unsigned long cken;
+ unsigned int enabled;
+ void (*enable)(struct clk *, int enable);
+};
+
+#define DEFINE_CLK(_name, _ctrlbit) \
+struct clk clk_##_name = { \
+ .enable = nuc93x_clk_enable, \
+ .cken = (1 << _ctrlbit), \
+ }
+
+#define DEF_CLKLOOK(_clk, _devname, _conname) \
+ { \
+ .clk = _clk, \
+ .dev_id = _devname, \
+ .con_id = _conname, \
+ }
+
--- /dev/null
+/*
+ * linux/arch/arm/mach-nuc93x/cpu.c
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC93x series cpu common support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/serial_8250.h>
+#include <linux/delay.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-ebi.h>
+
+#include "cpu.h"
+#include "clock.h"
+
+/* Initial IO mappings */
+
+static struct map_desc nuc93x_iodesc[] __initdata = {
+ IODESC_ENT(IRQ),
+ IODESC_ENT(GCR),
+ IODESC_ENT(UART),
+ IODESC_ENT(TIMER),
+ IODESC_ENT(EBI),
+};
+
+/* Initial nuc932 clock declarations. */
+static DEFINE_CLK(audio, 2);
+static DEFINE_CLK(sd, 3);
+static DEFINE_CLK(jpg, 4);
+static DEFINE_CLK(video, 5);
+static DEFINE_CLK(vpost, 6);
+static DEFINE_CLK(2d, 7);
+static DEFINE_CLK(gpu, 8);
+static DEFINE_CLK(gdma, 9);
+static DEFINE_CLK(adc, 10);
+static DEFINE_CLK(uart, 11);
+static DEFINE_CLK(spi, 12);
+static DEFINE_CLK(pwm, 13);
+static DEFINE_CLK(timer, 14);
+static DEFINE_CLK(wdt, 15);
+static DEFINE_CLK(ac97, 16);
+static DEFINE_CLK(i2s, 16);
+static DEFINE_CLK(usbck, 17);
+static DEFINE_CLK(usb48, 18);
+static DEFINE_CLK(usbh, 19);
+static DEFINE_CLK(i2c, 20);
+static DEFINE_CLK(ext, 0);
+
+static struct clk_lookup nuc932_clkregs[] = {
+ DEF_CLKLOOK(&clk_audio, "nuc932-audio", NULL),
+ DEF_CLKLOOK(&clk_sd, "nuc932-sd", NULL),
+ DEF_CLKLOOK(&clk_jpg, "nuc932-jpg", "NULL"),
+ DEF_CLKLOOK(&clk_video, "nuc932-video", "NULL"),
+ DEF_CLKLOOK(&clk_vpost, "nuc932-vpost", NULL),
+ DEF_CLKLOOK(&clk_2d, "nuc932-2d", NULL),
+ DEF_CLKLOOK(&clk_gpu, "nuc932-gpu", NULL),
+ DEF_CLKLOOK(&clk_gdma, "nuc932-gdma", "NULL"),
+ DEF_CLKLOOK(&clk_adc, "nuc932-adc", NULL),
+ DEF_CLKLOOK(&clk_uart, NULL, "uart"),
+ DEF_CLKLOOK(&clk_spi, "nuc932-spi", NULL),
+ DEF_CLKLOOK(&clk_pwm, "nuc932-pwm", NULL),
+ DEF_CLKLOOK(&clk_timer, NULL, "timer"),
+ DEF_CLKLOOK(&clk_wdt, "nuc932-wdt", NULL),
+ DEF_CLKLOOK(&clk_ac97, "nuc932-ac97", NULL),
+ DEF_CLKLOOK(&clk_i2s, "nuc932-i2s", NULL),
+ DEF_CLKLOOK(&clk_usbck, "nuc932-usbck", NULL),
+ DEF_CLKLOOK(&clk_usb48, "nuc932-usb48", NULL),
+ DEF_CLKLOOK(&clk_usbh, "nuc932-usbh", NULL),
+ DEF_CLKLOOK(&clk_i2c, "nuc932-i2c", NULL),
+ DEF_CLKLOOK(&clk_ext, NULL, "ext"),
+};
+
+/* Initial serial platform data */
+
+struct plat_serial8250_port nuc93x_uart_data[] = {
+ NUC93X_8250PORT(UART0),
+ {},
+};
+
+struct platform_device nuc93x_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = nuc93x_uart_data,
+ },
+};
+
+/*Init NUC93x evb io*/
+
+void __init nuc93x_map_io(struct map_desc *mach_desc, int mach_size)
+{
+ unsigned long idcode = 0x0;
+
+ iotable_init(mach_desc, mach_size);
+ iotable_init(nuc93x_iodesc, ARRAY_SIZE(nuc93x_iodesc));
+
+ idcode = __raw_readl(NUC93XPDID);
+ if (idcode == NUC932_CPUID)
+ printk(KERN_INFO "CPU type 0x%08lx is NUC910\n", idcode);
+ else
+ printk(KERN_ERR "CPU type detect error!\n");
+
+}
+
+/*Init NUC93x clock*/
+
+void __init nuc93x_init_clocks(void)
+{
+ clks_register(nuc932_clkregs, ARRAY_SIZE(nuc932_clkregs));
+}
+
--- /dev/null
+/*
+ * arch/arm/mach-nuc93x/cpu.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Header file for NUC93X CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define IODESC_ENT(y) \
+{ \
+ .virtual = (unsigned long)NUC93X_VA_##y, \
+ .pfn = __phys_to_pfn(NUC93X_PA_##y), \
+ .length = NUC93X_SZ_##y, \
+ .type = MT_DEVICE, \
+}
+
+#define NUC93X_8250PORT(name) \
+{ \
+ .membase = name##_BA, \
+ .mapbase = name##_PA, \
+ .irq = IRQ_##name, \
+ .uartclk = 57139200, \
+ .regshift = 2, \
+ .iotype = UPIO_MEM, \
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
+}
+
+/*Cpu identifier register*/
+
+#define NUC93XPDID NUC93X_VA_GCR
+#define NUC932_CPUID 0x29550091
+
+/* extern file from cpu.c */
+
+extern void nuc93x_clock_source(struct device *dev, unsigned char *src);
+extern void nuc93x_init_clocks(void);
+extern void nuc93x_map_io(struct map_desc *mach_desc, int mach_size);
+extern void nuc93x_board_init(struct platform_device **device, int size);
+extern struct platform_device nuc93x_serial_device;
+
--- /dev/null
+/*
+ * linux/arch/arm/mach-nuc93x/dev.c
+ *
+ * Copyright (C) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include "cpu.h"
+
+/*Here should be your evb resourse,such as LCD*/
+
+static struct platform_device *nuc93x_public_dev[] __initdata = {
+ &nuc93x_serial_device,
+};
+
+/* Provide adding specific CPU platform devices API */
+
+void __init nuc93x_board_init(struct platform_device **device, int size)
+{
+ platform_add_devices(device, size);
+ platform_add_devices(nuc93x_public_dev, ARRAY_SIZE(nuc93x_public_dev));
+}
+
--- /dev/null
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
--- /dev/null
+/*
+ * arch/arm/mach-nuc93x/include/mach/entry-macro.S
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ */
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ mov \base, #AIC_BA
+
+ ldr \irqnr, [ \base, #AIC_IPER]
+ ldr \irqnr, [ \base, #AIC_ISNR]
+ cmp \irqnr, #0
+
+ .endm
+
+ /* currently don't need an disable_fiq macro */
+
+ .macro disable_fiq
+ .endm
--- /dev/null
+/*
+ * arch/arm/mach-nuc93x/include/mach/hardware.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_HARDWARE_H */
--- /dev/null
+/*
+ * arch/arm/mach-nuc93x/include/mach/io.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+
+#define __mem_pci(a) (a)
+#define __io(a) __typesafe_io(a)
+
+#endif
--- /dev/null
+/*
+ * arch/arm/mach-nuc93x/include/mach/irqs.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define NUC93X_IRQ(x) (x)
+
+/* Main cpu interrupts */
+
+#define IRQ_WDT NUC93X_IRQ(1)
+#define IRQ_IRQ0 NUC93X_IRQ(2)
+#define IRQ_IRQ1 NUC93X_IRQ(3)
+#define IRQ_IRQ2 NUC93X_IRQ(4)
+#define IRQ_IRQ3 NUC93X_IRQ(5)
+#define IRQ_USBH NUC93X_IRQ(6)
+#define IRQ_APU NUC93X_IRQ(7)
+#define IRQ_VPOST NUC93X_IRQ(8)
+#define IRQ_ADC NUC93X_IRQ(9)
+#define IRQ_UART0 NUC93X_IRQ(10)
+#define IRQ_TIMER0 NUC93X_IRQ(11)
+#define IRQ_GPU0 NUC93X_IRQ(12)
+#define IRQ_GPU1 NUC93X_IRQ(13)
+#define IRQ_GPU2 NUC93X_IRQ(14)
+#define IRQ_GPU3 NUC93X_IRQ(15)
+#define IRQ_GPU4 NUC93X_IRQ(16)
+#define IRQ_VIN NUC93X_IRQ(17)
+#define IRQ_USBD NUC93X_IRQ(18)
+#define IRQ_VRAMLD NUC93X_IRQ(19)
+#define IRQ_GDMA0 NUC93X_IRQ(20)
+#define IRQ_GDMA1 NUC93X_IRQ(21)
+#define IRQ_SDIO NUC93X_IRQ(22)
+#define IRQ_FMI NUC93X_IRQ(22)
+#define IRQ_JPEG NUC93X_IRQ(23)
+#define IRQ_SPI0 NUC93X_IRQ(24)
+#define IRQ_SPI1 NUC93X_IRQ(25)
+#define IRQ_RTC NUC93X_IRQ(26)
+#define IRQ_PWM0 NUC93X_IRQ(27)
+#define IRQ_PWM1 NUC93X_IRQ(28)
+#define IRQ_PWM2 NUC93X_IRQ(29)
+#define IRQ_PWM3 NUC93X_IRQ(30)
+#define IRQ_I2SAC97 NUC93X_IRQ(31)
+#define IRQ_CAP0 IRQ_PWM0
+#define IRQ_CAP1 IRQ_PWM1
+#define IRQ_CAP2 IRQ_PWM2
+#define IRQ_CAP3 IRQ_PWM3
+#define NR_IRQS (IRQ_I2SAC97 + 1)
+
+#endif /* __ASM_ARCH_IRQ_H */
--- /dev/null
+/*
+ * arch/arm/mach-nuc93x/include/mach/map.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H
+
+#define MAP_OFFSET (0xfff00000)
+#define CLK_OFFSET (0x10)
+
+#ifndef __ASSEMBLY__
+#define NUC93X_ADDR(x) ((void __iomem *)(0xF0000000 + ((x)&(~MAP_OFFSET))))
+#else
+#define NUC93X_ADDR(x) (0xF0000000 + ((x)&(~MAP_OFFSET)))
+#endif
+
+ /*
+ * nuc932 hardware register definition
+ */
+
+#define NUC93X_PA_IRQ (0xFFF83000)
+#define NUC93X_PA_GCR (0xFFF00000)
+#define NUC93X_PA_EBI (0xFFF01000)
+#define NUC93X_PA_UART (0xFFF80000)
+#define NUC93X_PA_TIMER (0xFFF81000)
+#define NUC93X_PA_GPIO (0xFFF84000)
+#define NUC93X_PA_GDMA (0xFFF03000)
+#define NUC93X_PA_USBHOST (0xFFF0d000)
+#define NUC93X_PA_I2C (0xFFF89000)
+#define NUC93X_PA_LCD (0xFFF06000)
+#define NUC93X_PA_GE (0xFFF05000)
+#define NUC93X_PA_ADC (0xFFF85000)
+#define NUC93X_PA_RTC (0xFFF87000)
+#define NUC93X_PA_PWM (0xFFF82000)
+#define NUC93X_PA_ACTL (0xFFF0a000)
+#define NUC93X_PA_USBDEV (0xFFF0C000)
+#define NUC93X_PA_JEPEG (0xFFF0e000)
+#define NUC93X_PA_CACHE_T (0xFFF60000)
+#define NUC93X_PA_VRAM (0xFFF0b000)
+#define NUC93X_PA_DMAC (0xFFF09000)
+#define NUC93X_PA_I2SM (0xFFF08000)
+#define NUC93X_PA_CACHE (0xFFF02000)
+#define NUC93X_PA_GPU (0xFFF04000)
+#define NUC93X_PA_VIDEOIN (0xFFF07000)
+#define NUC93X_PA_SPI0 (0xFFF86000)
+#define NUC93X_PA_SPI1 (0xFFF88000)
+
+ /*
+ * nuc932 virtual address mapping.
+ * interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+
+#define NUC93X_VA_IRQ NUC93X_ADDR(0x00000000)
+#define NUC93X_SZ_IRQ SZ_4K
+
+#define NUC93X_VA_GCR NUC93X_ADDR(NUC93X_PA_IRQ)
+#define NUC93X_VA_CLKPWR (NUC93X_VA_GCR+CLK_OFFSET)
+#define NUC93X_SZ_GCR SZ_4K
+
+/* EBI management */
+
+#define NUC93X_VA_EBI NUC93X_ADDR(NUC93X_PA_EBI)
+#define NUC93X_SZ_EBI SZ_4K
+
+/* UARTs */
+
+#define NUC93X_VA_UART NUC93X_ADDR(NUC93X_PA_UART)
+#define NUC93X_SZ_UART SZ_4K
+
+/* Timers */
+
+#define NUC93X_VA_TIMER NUC93X_ADDR(NUC93X_PA_TIMER)
+#define NUC93X_SZ_TIMER SZ_4K
+
+/* GPIO ports */
+
+#define NUC93X_VA_GPIO NUC93X_ADDR(NUC93X_PA_GPIO)
+#define NUC93X_SZ_GPIO SZ_4K
+
+/* GDMA control */
+
+#define NUC93X_VA_GDMA NUC93X_ADDR(NUC93X_PA_GDMA)
+#define NUC93X_SZ_GDMA SZ_4K
+
+/* I2C hardware controller */
+
+#define NUC93X_VA_I2C NUC93X_ADDR(NUC93X_PA_I2C)
+#define NUC93X_SZ_I2C SZ_4K
+
+/* LCD controller*/
+
+#define NUC93X_VA_LCD NUC93X_ADDR(NUC93X_PA_LCD)
+#define NUC93X_SZ_LCD SZ_4K
+
+/* 2D controller*/
+
+#define NUC93X_VA_GE NUC93X_ADDR(NUC93X_PA_GE)
+#define NUC93X_SZ_GE SZ_4K
+
+/* ADC */
+
+#define NUC93X_VA_ADC NUC93X_ADDR(NUC93X_PA_ADC)
+#define NUC93X_SZ_ADC SZ_4K
+
+/* RTC */
+
+#define NUC93X_VA_RTC NUC93X_ADDR(NUC93X_PA_RTC)
+#define NUC93X_SZ_RTC SZ_4K
+
+/* Pulse Width Modulation(PWM) Registers */
+
+#define NUC93X_VA_PWM NUC93X_ADDR(NUC93X_PA_PWM)
+#define NUC93X_SZ_PWM SZ_4K
+
+/* Audio Controller controller */
+
+#define NUC93X_VA_ACTL NUC93X_ADDR(NUC93X_PA_ACTL)
+#define NUC93X_SZ_ACTL SZ_4K
+
+/* USB Device port */
+
+#define NUC93X_VA_USBDEV NUC93X_ADDR(NUC93X_PA_USBDEV)
+#define NUC93X_SZ_USBDEV SZ_4K
+
+/* USB host controller*/
+#define NUC93X_VA_USBHOST NUC93X_ADDR(NUC93X_PA_USBHOST)
+#define NUC93X_SZ_USBHOST SZ_4K
+
+#endif /* __ASM_ARCH_MAP_H */
--- /dev/null
+/*
+ * arch/arm/mach-nuc93x/include/mach/memory.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#endif
--- /dev/null
+/*
+ * arch/arm/mach-nuc93x/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H
+
+/* Clock Control Registers */
+#define CLK_BA NUC93X_VA_CLKPWR
+#define REG_CLKEN (CLK_BA + 0x00)
+#define REG_CLKSEL (CLK_BA + 0x04)
+#define REG_CLKDIV (CLK_BA + 0x08)
+#define REG_PLLCON0 (CLK_BA + 0x0C)
+#define REG_PLLCON1 (CLK_BA + 0x10)
+#define REG_PMCON (CLK_BA + 0x14)
+#define REG_IRQWAKECON (CLK_BA + 0x18)
+#define REG_IRQWAKEFLAG (CLK_BA + 0x1C)
+#define REG_IPSRST (CLK_BA + 0x20)
+#define REG_CLKEN1 (CLK_BA + 0x24)
+#define REG_CLKDIV1 (CLK_BA + 0x28)
+
+/* Define PLL freq setting */
+#define PLL_DISABLE 0x12B63
+#define PLL_66MHZ 0x2B63
+#define PLL_100MHZ 0x4F64
+#define PLL_120MHZ 0x4F63
+#define PLL_166MHZ 0x4124
+#define PLL_200MHZ 0x4F24
+
+/* Define AHB:CPUFREQ ratio */
+#define AHB_CPUCLK_1_1 0x00
+#define AHB_CPUCLK_1_2 0x01
+#define AHB_CPUCLK_1_4 0x02
+#define AHB_CPUCLK_1_8 0x03
+
+/* Define APB:AHB ratio */
+#define APB_AHB_1_2 0x01
+#define APB_AHB_1_4 0x02
+#define APB_AHB_1_8 0x03
+
+/* Define clock skew */
+#define DEFAULTSKEW 0x48
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
--- /dev/null
+/*
+ * arch/arm/mach-nuc93x/include/mach/regs-ebi.h
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_EBI_H
+#define __ASM_ARCH_REGS_EBI_H
+
+/* EBI Control Registers */
+
+#define EBI_BA NUC93X_VA_EBI
+#define REG_EBICON (EBI_BA + 0x00)
+#define REG_ROMCON (EBI_BA + 0x04)
+#define REG_SDCONF0 (EBI_BA + 0x08)
+#define REG_SDCONF1 (EBI_BA + 0x0C)
+#define REG_SDTIME0 (EBI_BA + 0x10)
+#define REG_SDTIME1 (EBI_BA + 0x14)
+#define REG_EXT0CON (EBI_BA + 0x18)
+#define REG_EXT1CON (EBI_BA + 0x1C)
+#define REG_EXT2CON (EBI_BA + 0x20)
+#define REG_EXT3CON (EBI_BA + 0x24)
+#define REG_EXT4CON (EBI_BA + 0x28)
+#define REG_CKSKEW (EBI_BA + 0x2C)
+
+#endif /* __ASM_ARCH_REGS_EBI_H */
--- /dev/null
+/*
+ * arch/arm/mach-nuc93x/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef ___ASM_ARCH_REGS_IRQ_H
+#define ___ASM_ARCH_REGS_IRQ_H
+
+/* Advance Interrupt Controller (AIC) Registers */
+
+#define AIC_BA NUC93X_VA_IRQ
+
+#define REG_AIC_IRQSC (AIC_BA+0x80)
+#define REG_AIC_GEN (AIC_BA+0x84)
+#define REG_AIC_GASR (AIC_BA+0x88)
+#define REG_AIC_GSCR (AIC_BA+0x8C)
+#define REG_AIC_IRSR (AIC_BA+0x100)
+#define REG_AIC_IASR (AIC_BA+0x104)
+#define REG_AIC_ISR (AIC_BA+0x108)
+#define REG_AIC_IPER (AIC_BA+0x10C)
+#define REG_AIC_ISNR (AIC_BA+0x110)
+#define REG_AIC_IMR (AIC_BA+0x114)
+#define REG_AIC_OISR (AIC_BA+0x118)
+#define REG_AIC_MECR (AIC_BA+0x120)
+#define REG_AIC_MDCR (AIC_BA+0x124)
+#define REG_AIC_SSCR (AIC_BA+0x128)
+#define REG_AIC_SCCR (AIC_BA+0x12C)
+#define REG_AIC_EOSCR (AIC_BA+0x130)
+#define AIC_IPER (0x10C)
+#define AIC_ISNR (0x110)
+
+#endif /* ___ASM_ARCH_REGS_IRQ_H */
--- /dev/null
+/*
+ * arch/arm/mach-nuc93x/include/mach/regs-serial.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARM_REGS_SERIAL_H
+#define __ASM_ARM_REGS_SERIAL_H
+
+#define UART0_BA NUC93X_VA_UART
+#define UART1_BA (NUC93X_VA_UART+0x100)
+
+#define UART0_PA NUC93X_PA_UART
+#define UART1_PA (NUC93X_PA_UART+0x100)
+
+
+#ifndef __ASSEMBLY__
+
+struct nuc93x_uart_clksrc {
+ const char *name;
+ unsigned int divisor;
+ unsigned int min_baud;
+ unsigned int max_baud;
+};
+
+struct nuc93x_uartcfg {
+ unsigned char hwport;
+ unsigned char unused;
+ unsigned short flags;
+ unsigned long uart_flags;
+
+ unsigned long ucon;
+ unsigned long ulcon;
+ unsigned long ufcon;
+
+ struct nuc93x_uart_clksrc *clocks;
+ unsigned int clocks_size;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_ARM_REGS_SERIAL_H */
+
--- /dev/null
+/*
+ * arch/arm/mach-nuc93x/include/mach/regs-timer.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_TIMER_H
+#define __ASM_ARCH_REGS_TIMER_H
+
+/* Timer Registers */
+
+#define TMR_BA NUC93X_VA_TIMER
+#define REG_TCSR0 (TMR_BA+0x00)
+#define REG_TICR0 (TMR_BA+0x08)
+#define REG_TDR0 (TMR_BA+0x10)
+#define REG_TISR (TMR_BA+0x18)
+#define REG_WTCR (TMR_BA+0x1C)
+
+#endif /* __ASM_ARCH_REGS_TIMER_H */
--- /dev/null
+/*
+ * arch/arm/machnuc93x/include/mach/system.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/system.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <asm/proc-fns.h>
+
+static void arch_idle(void)
+{
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+ cpu_reset(0);
+}
+
--- /dev/null
+/*
+ * arch/arm/mach-nuc93x/include/mach/timex.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/timex.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE Now, I don't use it. */
+
+#define CLOCK_TICK_RATE 27000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
--- /dev/null
+/*
+ * arch/arm/mach-nuc93x/include/mach/uncompress.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+/* Defines for UART registers */
+
+#include <mach/regs-serial.h>
+#include <mach/map.h>
+#include <linux/serial_reg.h>
+
+#define arch_decomp_wdog()
+
+#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
+static u32 * uart_base = (u32 *)UART0_PA;
+
+static void putc(int ch)
+{
+ /* Check THRE and TEMT bits before we transmit the character.
+ */
+ while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+ barrier();
+
+ *uart_base = ch;
+}
+
+static inline void flush(void)
+{
+}
+
+static void arch_decomp_setup(void)
+{
+}
+
+#endif/* __ASM_NUC93X_UNCOMPRESS_H */
--- /dev/null
+/*
+ * arch/arm/mach-nuc93x/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/vmalloc.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
--- /dev/null
+/*
+ * linux/arch/arm/mach-nuc93x/irq.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+
+static void nuc93x_irq_mask(unsigned int irq)
+{
+ __raw_writel(1 << irq, REG_AIC_MDCR);
+}
+
+/*
+ * By the w90p910 spec,any irq,only write 1
+ * to REG_AIC_EOSCR for ACK
+ */
+
+static void nuc93x_irq_ack(unsigned int irq)
+{
+ __raw_writel(0x01, REG_AIC_EOSCR);
+}
+
+static void nuc93x_irq_unmask(unsigned int irq)
+{
+ __raw_writel(1 << irq, REG_AIC_MECR);
+
+}
+
+static struct irq_chip nuc93x_irq_chip = {
+ .ack = nuc93x_irq_ack,
+ .mask = nuc93x_irq_mask,
+ .unmask = nuc93x_irq_unmask,
+};
+
+void __init nuc93x_init_irq(void)
+{
+ int irqno;
+
+ __raw_writel(0xFFFFFFFE, REG_AIC_MDCR);
+
+ for (irqno = IRQ_WDT; irqno <= NR_IRQS; irqno++) {
+ set_irq_chip(irqno, &nuc93x_irq_chip);
+ set_irq_handler(irqno, handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc910evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc932.h"
+
+static void __init nuc932evb_map_io(void)
+{
+ nuc932_map_io();
+ nuc932_init_clocks();
+ nuc932_init_uartclk();
+}
+
+static void __init nuc932evb_init(void)
+{
+ nuc932_board_init();
+}
+
+MACHINE_START(NUC932EVB, "NUC932EVB")
+ /* Maintainer: Wan ZongShun */
+ .phys_io = NUC93X_PA_UART,
+ .io_pg_offst = (((u32)NUC93X_VA_UART) >> 18) & 0xfffc,
+ .boot_params = 0,
+ .map_io = nuc932evb_map_io,
+ .init_irq = nuc93x_init_irq,
+ .init_machine = nuc932evb_init,
+ .timer = &nuc93x_timer,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-nuc93x/nuc932.c
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC932 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+
+#include "cpu.h"
+#include "clock.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc932_dev[] __initdata = {
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc932evb_iodesc[] __initdata = {
+};
+
+/*Init NUC932 evb io*/
+
+void __init nuc932_map_io(void)
+{
+ nuc93x_map_io(nuc932evb_iodesc, ARRAY_SIZE(nuc932evb_iodesc));
+}
+
+/*Init NUC932 clock*/
+
+void __init nuc932_init_clocks(void)
+{
+ nuc93x_init_clocks();
+}
+
+/*enable NUC932 uart clock*/
+
+void __init nuc932_init_uartclk(void)
+{
+ struct clk *ck_uart = clk_get(NULL, "uart");
+ BUG_ON(IS_ERR(ck_uart));
+
+ clk_enable(ck_uart);
+}
+
+/*Init NUC932 board info*/
+
+void __init nuc932_board_init(void)
+{
+ nuc93x_board_init(nuc932_dev, ARRAY_SIZE(nuc932_dev));
+}
--- /dev/null
+/*
+ * arch/arm/mach-nuc93x/nuc932.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC93x CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc93x_init_irq(void);
+extern struct sys_timer nuc93x_timer;
+
+/* extern file from nuc932.c */
+
+extern void nuc932_board_init(void);
+extern void nuc932_init_clocks(void);
+extern void nuc932_map_io(void);
+extern void nuc932_init_uartclk(void);
--- /dev/null
+/*
+ * linux/arch/arm/mach-nuc93x/time.c
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+
+#include <mach/system.h>
+#include <mach/map.h>
+#include <mach/regs-timer.h>
+
+#define RESETINT 0x01
+#define PERIOD (0x01 << 27)
+#define ONESHOT (0x00 << 27)
+#define COUNTEN (0x01 << 30)
+#define INTEN (0x01 << 29)
+
+#define TICKS_PER_SEC 100
+#define PRESCALE 0x63 /* Divider = prescale + 1 */
+
+unsigned int timer0_load;
+
+static unsigned long nuc93x_gettimeoffset(void)
+{
+ return 0;
+}
+
+/*IRQ handler for the timer*/
+
+static irqreturn_t nuc93x_timer_interrupt(int irq, void *dev_id)
+{
+ timer_tick();
+ __raw_writel(0x01, REG_TISR); /* clear TIF0 */
+ return IRQ_HANDLED;
+}
+
+static struct irqaction nuc93x_timer_irq = {
+ .name = "nuc93x Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = nuc93x_timer_interrupt,
+};
+
+/*Set up timer reg.*/
+
+static void nuc93x_timer_setup(void)
+{
+ struct clk *ck_ext = clk_get(NULL, "ext");
+ struct clk *ck_timer = clk_get(NULL, "timer");
+ unsigned int rate, val = 0;
+
+ BUG_ON(IS_ERR(ck_ext) || IS_ERR(ck_timer));
+
+ clk_enable(ck_timer);
+ rate = clk_get_rate(ck_ext);
+ clk_put(ck_ext);
+ rate = rate / (PRESCALE + 0x01);
+
+ /* set a known state */
+ __raw_writel(0x00, REG_TCSR0);
+ __raw_writel(RESETINT, REG_TISR);
+
+ timer0_load = (rate / TICKS_PER_SEC);
+ __raw_writel(timer0_load, REG_TICR0);
+
+ val |= (PERIOD | COUNTEN | INTEN | PRESCALE);;
+ __raw_writel(val, REG_TCSR0);
+
+}
+
+static void __init nuc93x_timer_init(void)
+{
+ nuc93x_timer_setup();
+ setup_irq(IRQ_TIMER0, &nuc93x_timer_irq);
+}
+
+struct sys_timer nuc93x_timer = {
+ .init = nuc93x_timer_init,
+ .offset = nuc93x_gettimeoffset,
+ .resume = nuc93x_timer_setup
+};
static unsigned long clk_round_rate_mclk(struct clk *clk, unsigned long rate)
{
- if (rate >= 18900000)
+ if (rate <= 18900000)
return 18900000;
- if (rate >= 20800000)
+ if (rate <= 20800000)
return 20800000;
- if (rate >= 23100000)
+ if (rate <= 23100000)
return 23100000;
- if (rate >= 26000000)
+ if (rate <= 26000000)
return 26000000;
- if (rate >= 29700000)
+ if (rate <= 29700000)
return 29700000;
- if (rate >= 34700000)
+ if (rate <= 34700000)
return 34700000;
- if (rate >= 41600000)
+ if (rate <= 41600000)
return 41600000;
- if (rate >= 52000000)
+ if (rate <= 52000000)
return 52000000;
return -EINVAL;
}
static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate)
{
- if (rate >= 13000000)
+ if (rate <= 13000000)
return 13000000;
- if (rate >= 52000000)
+ if (rate <= 52000000)
return 52000000;
- if (rate >= 104000000)
+ if (rate <= 104000000)
return 104000000;
- if (rate >= 208000000)
+ if (rate <= 208000000)
return 208000000;
return -EINVAL;
}
* arch/arm/mach-u300/core.c
*
*
- * Copyright (C) 2007-2009 ST-Ericsson AB
+ * Copyright (C) 2007-2010 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* Core platform support, IRQ handling and device definitions.
* Author: Linus Walleij <linus.walleij@stericsson.com>
#include <linux/amba/bus.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <mach/coh901318.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <mach/hardware.h>
#include <mach/syscon.h>
+#include <mach/dma_channels.h>
#include "clock.h"
#include "mmc.h"
},
};
+static struct resource dma_resource[] = {
+ {
+ .start = U300_DMAC_BASE,
+ .end = U300_DMAC_BASE + PAGE_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_U300_DMA,
+ .end = IRQ_U300_DMA,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+#ifdef CONFIG_MACH_U300_BS335
+/* points out all dma slave channels.
+ * Syntax is [A1, B1, A2, B2, .... ,-1,-1]
+ * Select all channels from A to B, end of list is marked with -1,-1
+ */
+static int dma_slave_channels[] = {
+ U300_DMA_MSL_TX_0, U300_DMA_SPI_RX,
+ U300_DMA_UART1_TX, U300_DMA_UART1_RX, -1, -1};
+
+/* points out all dma memcpy channels. */
+static int dma_memcpy_channels[] = {
+ U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_8, -1, -1};
+
+#else /* CONFIG_MACH_U300_BS335 */
+
+static int dma_slave_channels[] = {U300_DMA_MSL_TX_0, U300_DMA_SPI_RX, -1, -1};
+static int dma_memcpy_channels[] = {
+ U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_10, -1, -1};
+
+#endif
+
+/** register dma for memory access
+ *
+ * active 1 means dma intends to access memory
+ * 0 means dma wont access memory
+ */
+static void coh901318_access_memory_state(struct device *dev, bool active)
+{
+}
+
+#define flags_memcpy_config (COH901318_CX_CFG_CH_DISABLE | \
+ COH901318_CX_CFG_RM_MEMORY_TO_MEMORY | \
+ COH901318_CX_CFG_LCR_DISABLE | \
+ COH901318_CX_CFG_TC_IRQ_ENABLE | \
+ COH901318_CX_CFG_BE_IRQ_ENABLE)
+#define flags_memcpy_lli_chained (COH901318_CX_CTRL_TC_ENABLE | \
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
+ COH901318_CX_CTRL_MASTER_MODE_M1RW | \
+ COH901318_CX_CTRL_TCP_DISABLE | \
+ COH901318_CX_CTRL_TC_IRQ_DISABLE | \
+ COH901318_CX_CTRL_HSP_DISABLE | \
+ COH901318_CX_CTRL_HSS_DISABLE | \
+ COH901318_CX_CTRL_DDMA_LEGACY | \
+ COH901318_CX_CTRL_PRDD_SOURCE)
+#define flags_memcpy_lli (COH901318_CX_CTRL_TC_ENABLE | \
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
+ COH901318_CX_CTRL_MASTER_MODE_M1RW | \
+ COH901318_CX_CTRL_TCP_DISABLE | \
+ COH901318_CX_CTRL_TC_IRQ_DISABLE | \
+ COH901318_CX_CTRL_HSP_DISABLE | \
+ COH901318_CX_CTRL_HSS_DISABLE | \
+ COH901318_CX_CTRL_DDMA_LEGACY | \
+ COH901318_CX_CTRL_PRDD_SOURCE)
+#define flags_memcpy_lli_last (COH901318_CX_CTRL_TC_ENABLE | \
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
+ COH901318_CX_CTRL_MASTER_MODE_M1RW | \
+ COH901318_CX_CTRL_TCP_DISABLE | \
+ COH901318_CX_CTRL_TC_IRQ_ENABLE | \
+ COH901318_CX_CTRL_HSP_DISABLE | \
+ COH901318_CX_CTRL_HSS_DISABLE | \
+ COH901318_CX_CTRL_DDMA_LEGACY | \
+ COH901318_CX_CTRL_PRDD_SOURCE)
+
+const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
+ {
+ .number = U300_DMA_MSL_TX_0,
+ .name = "MSL TX 0",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x20,
+ },
+ {
+ .number = U300_DMA_MSL_TX_1,
+ .name = "MSL TX 1",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x20,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ },
+ {
+ .number = U300_DMA_MSL_TX_2,
+ .name = "MSL TX 2",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x20,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .desc_nbr_max = 10,
+ },
+ {
+ .number = U300_DMA_MSL_TX_3,
+ .name = "MSL TX 3",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x20,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ },
+ {
+ .number = U300_DMA_MSL_TX_4,
+ .name = "MSL TX 4",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x20,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ },
+ {
+ .number = U300_DMA_MSL_TX_5,
+ .name = "MSL TX 5",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x20,
+ },
+ {
+ .number = U300_DMA_MSL_TX_6,
+ .name = "MSL TX 6",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x20,
+ },
+ {
+ .number = U300_DMA_MSL_RX_0,
+ .name = "MSL RX 0",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x220,
+ },
+ {
+ .number = U300_DMA_MSL_RX_1,
+ .name = "MSL RX 1",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x220,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_MSL_RX_2,
+ .name = "MSL RX 2",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x220,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_MSL_RX_3,
+ .name = "MSL RX 3",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x220,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_MSL_RX_4,
+ .name = "MSL RX 4",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x220,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_MSL_RX_5,
+ .name = "MSL RX 5",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x220,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_MSL_RX_6,
+ .name = "MSL RX 6",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x220,
+ },
+ {
+ .number = U300_DMA_MMCSD_RX_TX,
+ .name = "MMCSD RX TX",
+ .priority_high = 0,
+ .dev_addr = U300_MMCSD_BASE + 0x080,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY,
+
+ },
+ {
+ .number = U300_DMA_MSPRO_TX,
+ .name = "MSPRO TX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_MSPRO_RX,
+ .name = "MSPRO RX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_UART0_TX,
+ .name = "UART0 TX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_UART0_RX,
+ .name = "UART0 RX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_APEX_TX,
+ .name = "APEX TX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_APEX_RX,
+ .name = "APEX RX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_PCM_I2S0_TX,
+ .name = "PCM I2S0 TX",
+ .priority_high = 1,
+ .dev_addr = U300_PCM_I2S0_BASE + 0x14,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ },
+ {
+ .number = U300_DMA_PCM_I2S0_RX,
+ .name = "PCM I2S0 RX",
+ .priority_high = 1,
+ .dev_addr = U300_PCM_I2S0_BASE + 0x10,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_PCM_I2S1_TX,
+ .name = "PCM I2S1 TX",
+ .priority_high = 1,
+ .dev_addr = U300_PCM_I2S1_BASE + 0x14,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ },
+ {
+ .number = U300_DMA_PCM_I2S1_RX,
+ .name = "PCM I2S1 RX",
+ .priority_high = 1,
+ .dev_addr = U300_PCM_I2S1_BASE + 0x10,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_XGAM_CDI,
+ .name = "XGAM CDI",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_XGAM_PDI,
+ .name = "XGAM PDI",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_SPI_TX,
+ .name = "SPI TX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_SPI_RX,
+ .name = "SPI RX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_0,
+ .name = "GENERAL 00",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_1,
+ .name = "GENERAL 01",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_2,
+ .name = "GENERAL 02",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_3,
+ .name = "GENERAL 03",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_4,
+ .name = "GENERAL 04",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_5,
+ .name = "GENERAL 05",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_6,
+ .name = "GENERAL 06",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_7,
+ .name = "GENERAL 07",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_8,
+ .name = "GENERAL 08",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+#ifdef CONFIG_MACH_U300_BS335
+ {
+ .number = U300_DMA_UART1_TX,
+ .name = "UART1 TX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_UART1_RX,
+ .name = "UART1 RX",
+ .priority_high = 0,
+ }
+#else
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_9,
+ .name = "GENERAL 09",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_10,
+ .name = "GENERAL 10",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ }
+#endif
+};
+
+
+static struct coh901318_platform coh901318_platform = {
+ .chans_slave = dma_slave_channels,
+ .chans_memcpy = dma_memcpy_channels,
+ .access_memory_state = coh901318_access_memory_state,
+ .chan_conf = chan_config,
+ .max_channels = U300_DMA_CHANNELS,
+};
+
static struct platform_device wdog_device = {
- .name = "wdog",
+ .name = "coh901327_wdog",
.id = -1,
.num_resources = ARRAY_SIZE(wdog_resources),
.resource = wdog_resources,
.resource = ave_resources,
};
+static struct platform_device dma_device = {
+ .name = "coh901318",
+ .id = -1,
+ .resource = dma_resource,
+ .num_resources = ARRAY_SIZE(dma_resource),
+ .dev = {
+ .platform_data = &coh901318_platform,
+ .coherent_dma_mask = ~0,
+ },
+};
+
/*
* Notice that AMBA devices are initialized before platform devices.
*
*/
static struct platform_device *platform_devs[] __initdata = {
+ &dma_device,
&i2c0_device,
&i2c1_device,
&keypad_device,
for (i = 0; i < U300_GPIO_MAX; i++) {
val = 0;
for (j = 0; j < 8; j++)
- val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP)) << j;
+ val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP) << j);
local_irq_save(flags);
writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING);
local_irq_restore(flags);
--- /dev/null
+/*
+ *
+ * arch/arm/mach-u300/include/mach/dma_channels.h
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Map file for the U300 dma driver.
+ * Author: Per Friden <per.friden@stericsson.com>
+ */
+
+#ifndef DMA_CHANNELS_H
+#define DMA_CHANNELS_H
+
+#define U300_DMA_MSL_TX_0 0
+#define U300_DMA_MSL_TX_1 1
+#define U300_DMA_MSL_TX_2 2
+#define U300_DMA_MSL_TX_3 3
+#define U300_DMA_MSL_TX_4 4
+#define U300_DMA_MSL_TX_5 5
+#define U300_DMA_MSL_TX_6 6
+#define U300_DMA_MSL_RX_0 7
+#define U300_DMA_MSL_RX_1 8
+#define U300_DMA_MSL_RX_2 9
+#define U300_DMA_MSL_RX_3 10
+#define U300_DMA_MSL_RX_4 11
+#define U300_DMA_MSL_RX_5 12
+#define U300_DMA_MSL_RX_6 13
+#define U300_DMA_MMCSD_RX_TX 14
+#define U300_DMA_MSPRO_TX 15
+#define U300_DMA_MSPRO_RX 16
+#define U300_DMA_UART0_TX 17
+#define U300_DMA_UART0_RX 18
+#define U300_DMA_APEX_TX 19
+#define U300_DMA_APEX_RX 20
+#define U300_DMA_PCM_I2S0_TX 21
+#define U300_DMA_PCM_I2S0_RX 22
+#define U300_DMA_PCM_I2S1_TX 23
+#define U300_DMA_PCM_I2S1_RX 24
+#define U300_DMA_XGAM_CDI 25
+#define U300_DMA_XGAM_PDI 26
+#define U300_DMA_SPI_TX 27
+#define U300_DMA_SPI_RX 28
+#define U300_DMA_GENERAL_PURPOSE_0 29
+#define U300_DMA_GENERAL_PURPOSE_1 30
+#define U300_DMA_GENERAL_PURPOSE_2 31
+#define U300_DMA_GENERAL_PURPOSE_3 32
+#define U300_DMA_GENERAL_PURPOSE_4 33
+#define U300_DMA_GENERAL_PURPOSE_5 34
+#define U300_DMA_GENERAL_PURPOSE_6 35
+#define U300_DMA_GENERAL_PURPOSE_7 36
+#define U300_DMA_GENERAL_PURPOSE_8 37
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_DMA_UART1_TX 38
+#define U300_DMA_UART1_RX 39
+#else
+#define U300_DMA_GENERAL_PURPOSE_9 38
+#define U300_DMA_GENERAL_PURPOSE_10 39
+#endif
+
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_DMA_DEVICE_CHANNELS 32
+#else
+#define U300_DMA_DEVICE_CHANNELS 30
+#endif
+#define U300_DMA_CHANNELS 40
+
+
+#endif /* DMA_CHANNELS_H */
#include <asm/mach/arch.h>
#include <plat/mtu.h>
+#include <plat/i2c.h>
#include <mach/hardware.h>
#include <mach/setup.h>
.periphid = SSP_PER_ID,
};
+static struct amba_device pl031_device = {
+ .dev = {
+ .init_name = "pl031",
+ },
+ .res = {
+ .start = U8500_RTC_BASE,
+ .end = U8500_RTC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_RTC_RTT, NO_IRQ},
+};
+
+#define U8500_I2C_RESOURCES(id, size) \
+static struct resource u8500_i2c_resources_##id[] = { \
+ [0] = { \
+ .start = U8500_I2C##id##_BASE, \
+ .end = U8500_I2C##id##_BASE + size - 1, \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ [1] = { \
+ .start = IRQ_I2C##id, \
+ .end = IRQ_I2C##id, \
+ .flags = IORESOURCE_IRQ \
+ } \
+}
+
+U8500_I2C_RESOURCES(0, SZ_4K);
+U8500_I2C_RESOURCES(1, SZ_4K);
+U8500_I2C_RESOURCES(2, SZ_4K);
+U8500_I2C_RESOURCES(3, SZ_4K);
+
+#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
+static struct nmk_i2c_controller u8500_i2c_##id = { \
+ /* \
+ * slave data setup time, which is \
+ * 250 ns,100ns,10ns which is 14,6,2 \
+ * respectively for a 48 Mhz \
+ * i2c clock \
+ */ \
+ .slsu = _slsu, \
+ /* Tx FIFO threshold */ \
+ .tft = _tft, \
+ /* Rx FIFO threshold */ \
+ .rft = _rft, \
+ /* std. mode operation */ \
+ .clk_freq = clk, \
+ .sm = _sm, \
+}
+
+/*
+ * The board uses 4 i2c controllers, initialize all of
+ * them with slave data setup time of 250 ns,
+ * Tx & Rx FIFO threshold values as 1 and standard
+ * mode of operation
+ */
+U8500_I2C_CONTROLLER(0, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+U8500_I2C_CONTROLLER(1, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+U8500_I2C_CONTROLLER(2, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+U8500_I2C_CONTROLLER(3, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+
+#define U8500_I2C_PDEVICE(cid) \
+static struct platform_device i2c_controller##cid = { \
+ .name = "nmk-i2c", \
+ .id = cid, \
+ .num_resources = 2, \
+ .resource = u8500_i2c_resources_##cid, \
+ .dev = { \
+ .platform_data = &u8500_i2c_##cid \
+ } \
+}
+
+U8500_I2C_PDEVICE(0);
+U8500_I2C_PDEVICE(1);
+U8500_I2C_PDEVICE(2);
+U8500_I2C_PDEVICE(3);
+
static struct amba_device *amba_devs[] __initdata = {
&uart0_device,
&uart1_device,
&uart2_device,
&pl022_device,
+ &pl031_device,
+};
+
+/* add any platform devices here - TODO */
+static struct platform_device *platform_devs[] __initdata = {
+ &i2c_controller0,
+ &i2c_controller1,
+ &i2c_controller2,
+ &i2c_controller3,
};
static void __init u8500_timer_init(void)
for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
amba_device_register(amba_devs[i], &iomem_resource);
+ platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+
spi_register_board_info(u8500_spi_devices,
ARRAY_SIZE(u8500_spi_devices));
/* minimum static i/o mapping required to boot U8500 platforms */
static struct map_desc u8500_io_desc[] __initdata = {
+ __IO_DEV_DESC(U8500_UART2_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
* published by the Free Software Foundation.
*
*/
+#include <mach/hardware.h>
+
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @MMU enabled?
- moveq \rx, #0x80000000 @MMU off, Physical address
- movne \rx, #0xF0000000 @MMU on, Virtual address
- orr \rx, \rx, #0x7000
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =U8500_UART2_BASE @ no, physical address
+ ldrne \rx, =IO_ADDRESS(U8500_UART2_BASE) @ yes, virtual address
.endm
#include <asm/hardware/debug-pl01x.S>
IODESC_ENT(UART),
IODESC_ENT(TIMER),
IODESC_ENT(EBI),
+ IODESC_ENT(GPIO),
};
/* Initial clock declarations. */
static DEFINE_CLK(adc, 28);
static DEFINE_CLK(usi, 29);
static DEFINE_CLK(ext, 0);
+static DEFINE_CLK(timer0, 19);
+static DEFINE_CLK(timer1, 20);
+static DEFINE_CLK(timer2, 21);
+static DEFINE_CLK(timer3, 22);
+static DEFINE_CLK(timer4, 23);
static struct clk_lookup nuc900_clkregs[] = {
DEF_CLKLOOK(&clk_lcd, "nuc900-lcd", NULL),
DEF_CLKLOOK(&clk_adc, "nuc900-adc", NULL),
DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL),
DEF_CLKLOOK(&clk_ext, NULL, "ext"),
+ DEF_CLKLOOK(&clk_timer0, NULL, "timer0"),
+ DEF_CLKLOOK(&clk_timer1, NULL, "timer1"),
+ DEF_CLKLOOK(&clk_timer2, NULL, "timer2"),
+ DEF_CLKLOOK(&clk_timer3, NULL, "timer3"),
+ DEF_CLKLOOK(&clk_timer4, NULL, "timer4"),
};
/* Initial serial platform data */
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(fa_dma_inv_range)
+fa_dma_inv_range:
tst r0, #CACHE_DLINESIZE - 1
bic r0, r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D entry
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(fa_dma_clean_range)
+fa_dma_clean_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(fa_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq fa_dma_clean_range
+ bcs fa_dma_inv_range
+ b fa_dma_flush_range
+ENDPROC(fa_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(fa_dma_unmap_area)
+ mov pc, lr
+ENDPROC(fa_dma_unmap_area)
+
__INITDATA
.type fa_cache_fns, #object
.long fa_coherent_kern_range
.long fa_coherent_user_range
.long fa_flush_kern_dcache_area
- .long fa_dma_inv_range
- .long fa_dma_clean_range
+ .long fa_dma_map_area
+ .long fa_dma_unmap_area
.long fa_dma_flush_range
.size fa_cache_fns, . - fa_cache_fns
ENTRY(v3_flush_kern_dcache_area)
/* FALLTHROUGH */
-/*
- * dma_inv_range(start, end)
- *
- * Invalidate (discard) the specified virtual address range.
- * May not write back any entries. If 'start' or 'end'
- * are not cache line aligned, those lines must be written
- * back.
- *
- * - start - virtual start address
- * - end - virtual end address
- */
-ENTRY(v3_dma_inv_range)
- /* FALLTHROUGH */
-
/*
* dma_flush_range(start, end)
*
ENTRY(v3_dma_flush_range)
mov r0, #0
mcr p15, 0, r0, c7, c0, 0 @ flush ID cache
+ mov pc, lr
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v3_dma_unmap_area)
+ teq r2, #DMA_TO_DEVICE
+ bne v3_dma_flush_range
/* FALLTHROUGH */
/*
- * dma_clean_range(start, end)
- *
- * Clean (write back) the specified virtual address range.
- *
- * - start - virtual start address
- * - end - virtual end address
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
*/
-ENTRY(v3_dma_clean_range)
+ENTRY(v3_dma_map_area)
mov pc, lr
+ENDPROC(v3_dma_unmap_area)
+ENDPROC(v3_dma_map_area)
__INITDATA
.long v3_coherent_kern_range
.long v3_coherent_user_range
.long v3_flush_kern_dcache_area
- .long v3_dma_inv_range
- .long v3_dma_clean_range
+ .long v3_dma_map_area
+ .long v3_dma_unmap_area
.long v3_dma_flush_range
.size v3_cache_fns, . - v3_cache_fns
ENTRY(v4_flush_kern_dcache_area)
/* FALLTHROUGH */
-/*
- * dma_inv_range(start, end)
- *
- * Invalidate (discard) the specified virtual address range.
- * May not write back any entries. If 'start' or 'end'
- * are not cache line aligned, those lines must be written
- * back.
- *
- * - start - virtual start address
- * - end - virtual end address
- */
-ENTRY(v4_dma_inv_range)
- /* FALLTHROUGH */
-
/*
* dma_flush_range(start, end)
*
mov r0, #0
mcr p15, 0, r0, c7, c7, 0 @ flush ID cache
#endif
+ mov pc, lr
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v4_dma_unmap_area)
+ teq r2, #DMA_TO_DEVICE
+ bne v4_dma_flush_range
/* FALLTHROUGH */
/*
- * dma_clean_range(start, end)
- *
- * Clean (write back) the specified virtual address range.
- *
- * - start - virtual start address
- * - end - virtual end address
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
*/
-ENTRY(v4_dma_clean_range)
+ENTRY(v4_dma_map_area)
mov pc, lr
+ENDPROC(v4_dma_unmap_area)
+ENDPROC(v4_dma_map_area)
__INITDATA
.long v4_coherent_kern_range
.long v4_coherent_user_range
.long v4_flush_kern_dcache_area
- .long v4_dma_inv_range
- .long v4_dma_clean_range
+ .long v4_dma_map_area
+ .long v4_dma_unmap_area
.long v4_dma_flush_range
.size v4_cache_fns, . - v4_cache_fns
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(v4wb_dma_inv_range)
+v4wb_dma_inv_range:
tst r0, #CACHE_DLINESIZE - 1
bic r0, r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(v4wb_dma_clean_range)
+v4wb_dma_clean_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
.globl v4wb_dma_flush_range
.set v4wb_dma_flush_range, v4wb_coherent_kern_range
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v4wb_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq v4wb_dma_clean_range
+ bcs v4wb_dma_inv_range
+ b v4wb_dma_flush_range
+ENDPROC(v4wb_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v4wb_dma_unmap_area)
+ mov pc, lr
+ENDPROC(v4wb_dma_unmap_area)
+
__INITDATA
.type v4wb_cache_fns, #object
.long v4wb_coherent_kern_range
.long v4wb_coherent_user_range
.long v4wb_flush_kern_dcache_area
- .long v4wb_dma_inv_range
- .long v4wb_dma_clean_range
+ .long v4wb_dma_map_area
+ .long v4wb_dma_unmap_area
.long v4wb_dma_flush_range
.size v4wb_cache_fns, . - v4wb_cache_fns
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(v4wt_dma_inv_range)
+v4wt_dma_inv_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
- /* FALLTHROUGH */
-
-/*
- * dma_clean_range(start, end)
- *
- * Clean the specified virtual address range.
- *
- * - start - virtual start address
- * - end - virtual end address
- */
-ENTRY(v4wt_dma_clean_range)
mov pc, lr
/*
.globl v4wt_dma_flush_range
.equ v4wt_dma_flush_range, v4wt_dma_inv_range
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v4wt_dma_unmap_area)
+ add r1, r1, r0
+ teq r2, #DMA_TO_DEVICE
+ bne v4wt_dma_inv_range
+ /* FALLTHROUGH */
+
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v4wt_dma_map_area)
+ mov pc, lr
+ENDPROC(v4wt_dma_unmap_area)
+ENDPROC(v4wt_dma_map_area)
+
__INITDATA
.type v4wt_cache_fns, #object
.long v4wt_coherent_kern_range
.long v4wt_coherent_user_range
.long v4wt_flush_kern_dcache_area
- .long v4wt_dma_inv_range
- .long v4wt_dma_clean_range
+ .long v4wt_dma_map_area
+ .long v4wt_dma_unmap_area
.long v4wt_dma_flush_range
.size v4wt_cache_fns, . - v4wt_cache_fns
* - start - virtual start address of region
* - end - virtual end address of region
*/
-ENTRY(v6_dma_inv_range)
+v6_dma_inv_range:
tst r0, #D_CACHE_LINE_SIZE - 1
bic r0, r0, #D_CACHE_LINE_SIZE - 1
#ifdef HARVARD_CACHE
* - start - virtual start address of region
* - end - virtual end address of region
*/
-ENTRY(v6_dma_clean_range)
+v6_dma_clean_range:
bic r0, r0, #D_CACHE_LINE_SIZE - 1
1:
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v6_dma_map_area)
+ add r1, r1, r0
+ teq r2, #DMA_FROM_DEVICE
+ beq v6_dma_inv_range
+ b v6_dma_clean_range
+ENDPROC(v6_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v6_dma_unmap_area)
+ add r1, r1, r0
+ teq r2, #DMA_TO_DEVICE
+ bne v6_dma_inv_range
+ mov pc, lr
+ENDPROC(v6_dma_unmap_area)
+
__INITDATA
.type v6_cache_fns, #object
.long v6_coherent_kern_range
.long v6_coherent_user_range
.long v6_flush_kern_dcache_area
- .long v6_dma_inv_range
- .long v6_dma_clean_range
+ .long v6_dma_map_area
+ .long v6_dma_unmap_area
.long v6_dma_flush_range
.size v6_cache_fns, . - v6_cache_fns
* - start - virtual start address of region
* - end - virtual end address of region
*/
-ENTRY(v7_dma_inv_range)
+v7_dma_inv_range:
dcache_line_size r2, r3
sub r3, r2, #1
tst r0, r3
* - start - virtual start address of region
* - end - virtual end address of region
*/
-ENTRY(v7_dma_clean_range)
+v7_dma_clean_range:
dcache_line_size r2, r3
sub r3, r2, #1
bic r0, r0, r3
mov pc, lr
ENDPROC(v7_dma_flush_range)
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v7_dma_map_area)
+ add r1, r1, r0
+ teq r2, #DMA_FROM_DEVICE
+ beq v7_dma_inv_range
+ b v7_dma_clean_range
+ENDPROC(v7_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v7_dma_unmap_area)
+ add r1, r1, r0
+ teq r2, #DMA_TO_DEVICE
+ bne v7_dma_inv_range
+ mov pc, lr
+ENDPROC(v7_dma_unmap_area)
+
__INITDATA
.type v7_cache_fns, #object
.long v7_coherent_kern_range
.long v7_coherent_user_range
.long v7_flush_kern_dcache_area
- .long v7_dma_inv_range
- .long v7_dma_clean_range
+ .long v7_dma_map_area
+ .long v7_dma_unmap_area
.long v7_dma_flush_range
.size v7_cache_fns, . - v7_cache_fns
}
void feroceon_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto, *kfrom;
kto = kmap_atomic(to, KM_USER0);
kfrom = kmap_atomic(from, KM_USER1);
+ flush_cache_page(vma, vaddr, page_to_pfn(from));
feroceon_copy_user_page(kto, kfrom);
kunmap_atomic(kfrom, KM_USER1);
kunmap_atomic(kto, KM_USER0);
}
void v3_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto, *kfrom;
}
void v4_mc_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto = kmap_atomic(to, KM_USER1);
}
void v4wb_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto, *kfrom;
kto = kmap_atomic(to, KM_USER0);
kfrom = kmap_atomic(from, KM_USER1);
+ flush_cache_page(vma, vaddr, page_to_pfn(from));
v4wb_copy_user_page(kto, kfrom);
kunmap_atomic(kfrom, KM_USER1);
kunmap_atomic(kto, KM_USER0);
}
void v4wt_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto, *kfrom;
* attack the kernel's existing mapping of these pages.
*/
static void v6_copy_user_highpage_nonaliasing(struct page *to,
- struct page *from, unsigned long vaddr)
+ struct page *from, unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto, *kfrom;
* Copy the page, taking account of the cache colour.
*/
static void v6_copy_user_highpage_aliasing(struct page *to,
- struct page *from, unsigned long vaddr)
+ struct page *from, unsigned long vaddr, struct vm_area_struct *vma)
{
unsigned int offset = CACHE_COLOUR(vaddr);
unsigned long kfrom, kto;
}
void xsc3_mc_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto, *kfrom;
kto = kmap_atomic(to, KM_USER0);
kfrom = kmap_atomic(from, KM_USER1);
+ flush_cache_page(vma, vaddr, page_to_pfn(from));
xsc3_mc_copy_user_page(kto, kfrom);
kunmap_atomic(kfrom, KM_USER1);
kunmap_atomic(kto, KM_USER0);
}
void xscale_mc_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto = kmap_atomic(to, KM_USER1);
* platforms with CONFIG_DMABOUNCE.
* Use the driver DMA support - see dma-mapping.h (dma_sync_*)
*/
-void dma_cache_maint(const void *start, size_t size, int direction)
+void ___dma_single_cpu_to_dev(const void *kaddr, size_t size,
+ enum dma_data_direction dir)
{
- void (*inner_op)(const void *, const void *);
- void (*outer_op)(unsigned long, unsigned long);
-
- BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(start + size - 1));
-
- switch (direction) {
- case DMA_FROM_DEVICE: /* invalidate only */
- inner_op = dmac_inv_range;
- outer_op = outer_inv_range;
- break;
- case DMA_TO_DEVICE: /* writeback only */
- inner_op = dmac_clean_range;
- outer_op = outer_clean_range;
- break;
- case DMA_BIDIRECTIONAL: /* writeback and invalidate */
- inner_op = dmac_flush_range;
- outer_op = outer_flush_range;
- break;
- default:
- BUG();
- }
+ unsigned long paddr;
+
+ BUG_ON(!virt_addr_valid(kaddr) || !virt_addr_valid(kaddr + size - 1));
+
+ dmac_map_area(kaddr, size, dir);
- inner_op(start, start + size);
- outer_op(__pa(start), __pa(start) + size);
+ paddr = __pa(kaddr);
+ if (dir == DMA_FROM_DEVICE) {
+ outer_inv_range(paddr, paddr + size);
+ } else {
+ outer_clean_range(paddr, paddr + size);
+ }
+ /* FIXME: non-speculating: flush on bidirectional mappings? */
}
-EXPORT_SYMBOL(dma_cache_maint);
+EXPORT_SYMBOL(___dma_single_cpu_to_dev);
-static void dma_cache_maint_contiguous(struct page *page, unsigned long offset,
- size_t size, int direction)
+void ___dma_single_dev_to_cpu(const void *kaddr, size_t size,
+ enum dma_data_direction dir)
{
- void *vaddr;
- unsigned long paddr;
- void (*inner_op)(const void *, const void *);
- void (*outer_op)(unsigned long, unsigned long);
-
- switch (direction) {
- case DMA_FROM_DEVICE: /* invalidate only */
- inner_op = dmac_inv_range;
- outer_op = outer_inv_range;
- break;
- case DMA_TO_DEVICE: /* writeback only */
- inner_op = dmac_clean_range;
- outer_op = outer_clean_range;
- break;
- case DMA_BIDIRECTIONAL: /* writeback and invalidate */
- inner_op = dmac_flush_range;
- outer_op = outer_flush_range;
- break;
- default:
- BUG();
- }
+ BUG_ON(!virt_addr_valid(kaddr) || !virt_addr_valid(kaddr + size - 1));
- if (!PageHighMem(page)) {
- vaddr = page_address(page) + offset;
- inner_op(vaddr, vaddr + size);
- } else {
- vaddr = kmap_high_get(page);
- if (vaddr) {
- vaddr += offset;
- inner_op(vaddr, vaddr + size);
- kunmap_high(page);
- }
+ /* FIXME: non-speculating: not required */
+ /* don't bother invalidating if DMA to device */
+ if (dir != DMA_TO_DEVICE) {
+ unsigned long paddr = __pa(kaddr);
+ outer_inv_range(paddr, paddr + size);
}
- paddr = page_to_phys(page) + offset;
- outer_op(paddr, paddr + size);
+ dmac_unmap_area(kaddr, size, dir);
}
+EXPORT_SYMBOL(___dma_single_dev_to_cpu);
-void dma_cache_maint_page(struct page *page, unsigned long offset,
- size_t size, int dir)
+static void dma_cache_maint_page(struct page *page, unsigned long offset,
+ size_t size, enum dma_data_direction dir,
+ void (*op)(const void *, size_t, int))
{
/*
* A single sg entry may refer to multiple physically contiguous
size_t left = size;
do {
size_t len = left;
- if (PageHighMem(page) && len + offset > PAGE_SIZE) {
- if (offset >= PAGE_SIZE) {
- page += offset / PAGE_SIZE;
- offset %= PAGE_SIZE;
+ void *vaddr;
+
+ if (PageHighMem(page)) {
+ if (len + offset > PAGE_SIZE) {
+ if (offset >= PAGE_SIZE) {
+ page += offset / PAGE_SIZE;
+ offset %= PAGE_SIZE;
+ }
+ len = PAGE_SIZE - offset;
}
- len = PAGE_SIZE - offset;
+ vaddr = kmap_high_get(page);
+ if (vaddr) {
+ vaddr += offset;
+ op(vaddr, len, dir);
+ kunmap_high(page);
+ }
+ } else {
+ vaddr = page_address(page) + offset;
+ op(vaddr, len, dir);
}
- dma_cache_maint_contiguous(page, offset, len, dir);
offset = 0;
page++;
left -= len;
} while (left);
}
-EXPORT_SYMBOL(dma_cache_maint_page);
+
+void ___dma_page_cpu_to_dev(struct page *page, unsigned long off,
+ size_t size, enum dma_data_direction dir)
+{
+ unsigned long paddr;
+
+ dma_cache_maint_page(page, off, size, dir, dmac_map_area);
+
+ paddr = page_to_phys(page) + off;
+ if (dir == DMA_FROM_DEVICE) {
+ outer_inv_range(paddr, paddr + size);
+ } else {
+ outer_clean_range(paddr, paddr + size);
+ }
+ /* FIXME: non-speculating: flush on bidirectional mappings? */
+}
+EXPORT_SYMBOL(___dma_page_cpu_to_dev);
+
+void ___dma_page_dev_to_cpu(struct page *page, unsigned long off,
+ size_t size, enum dma_data_direction dir)
+{
+ unsigned long paddr = page_to_phys(page) + off;
+
+ /* FIXME: non-speculating: not required */
+ /* don't bother invalidating if DMA to device */
+ if (dir != DMA_TO_DEVICE)
+ outer_inv_range(paddr, paddr + size);
+
+ dma_cache_maint_page(page, off, size, dir, dmac_unmap_area);
+}
+EXPORT_SYMBOL(___dma_page_dev_to_cpu);
/**
* dma_map_sg - map a set of SG buffers for streaming mode DMA
int i;
for_each_sg(sg, s, nents, i) {
- dmabounce_sync_for_cpu(dev, sg_dma_address(s), 0,
- sg_dma_len(s), dir);
+ if (!dmabounce_sync_for_cpu(dev, sg_dma_address(s), 0,
+ sg_dma_len(s), dir))
+ continue;
+
+ __dma_page_dev_to_cpu(sg_page(s), s->offset,
+ s->length, dir);
}
}
EXPORT_SYMBOL(dma_sync_sg_for_cpu);
sg_dma_len(s), dir))
continue;
- if (!arch_is_coherent())
- dma_cache_maint_page(sg_page(s), s->offset,
- s->length, dir);
+ __dma_page_cpu_to_dev(sg_page(s), s->offset,
+ s->length, dir);
}
}
EXPORT_SYMBOL(dma_sync_sg_for_device);
#include <asm/cacheflush.h>
#include <asm/cachetype.h>
+#include <asm/smp_plat.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
if (vma->vm_flags & VM_EXEC && icache_is_vivt_asid_tagged())
__flush_icache_all();
}
+#else
+#define flush_pfn_alias(pfn,vaddr) do { } while (0)
+#endif
+#ifdef CONFIG_SMP
+static void flush_ptrace_access_other(void *args)
+{
+ __flush_icache_all();
+}
+#endif
+
+static
void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
- unsigned long uaddr, void *kaddr,
- unsigned long len, int write)
+ unsigned long uaddr, void *kaddr, unsigned long len)
{
if (cache_is_vivt()) {
- vivt_flush_ptrace_access(vma, page, uaddr, kaddr, len, write);
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
+ unsigned long addr = (unsigned long)kaddr;
+ __cpuc_coherent_kern_range(addr, addr + len);
+ }
return;
}
}
/* VIPT non-aliasing cache */
- if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)) &&
- vma->vm_flags & VM_EXEC) {
+ if (vma->vm_flags & VM_EXEC) {
unsigned long addr = (unsigned long)kaddr;
- /* only flushing the kernel mapping on non-aliasing VIPT */
__cpuc_coherent_kern_range(addr, addr + len);
+#ifdef CONFIG_SMP
+ if (cache_ops_need_broadcast())
+ smp_call_function(flush_ptrace_access_other,
+ NULL, 1);
+#endif
}
}
-#else
-#define flush_pfn_alias(pfn,vaddr) do { } while (0)
+
+/*
+ * Copy user data from/to a page which is mapped into a different
+ * processes address space. Really, we want to allow our "user
+ * space" model to handle this.
+ *
+ * Note that this code needs to run on the current CPU.
+ */
+void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+ unsigned long uaddr, void *dst, const void *src,
+ unsigned long len)
+{
+#ifdef CONFIG_SMP
+ preempt_disable();
#endif
+ memcpy(dst, src, len);
+ flush_ptrace_access(vma, page, uaddr, dst, len);
+#ifdef CONFIG_SMP
+ preempt_enable();
+#endif
+}
void __flush_dcache_page(struct address_space *mapping, struct page *page)
{
*
* (same as v4wb)
*/
-ENTRY(arm1020_dma_inv_range)
+arm1020_dma_inv_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
tst r0, #CACHE_DLINESIZE - 1
*
* (same as v4wb)
*/
-ENTRY(arm1020_dma_clean_range)
+arm1020_dma_clean_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
bic r0, r0, #CACHE_DLINESIZE - 1
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1020_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm1020_dma_clean_range
+ bcs arm1020_dma_inv_range
+ b arm1020_dma_flush_range
+ENDPROC(arm1020_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1020_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm1020_dma_unmap_area)
+
ENTRY(arm1020_cache_fns)
.long arm1020_flush_kern_cache_all
.long arm1020_flush_user_cache_all
.long arm1020_coherent_kern_range
.long arm1020_coherent_user_range
.long arm1020_flush_kern_dcache_area
- .long arm1020_dma_inv_range
- .long arm1020_dma_clean_range
+ .long arm1020_dma_map_area
+ .long arm1020_dma_unmap_area
.long arm1020_dma_flush_range
.align 5
*
* (same as v4wb)
*/
-ENTRY(arm1020e_dma_inv_range)
+arm1020e_dma_inv_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
tst r0, #CACHE_DLINESIZE - 1
*
* (same as v4wb)
*/
-ENTRY(arm1020e_dma_clean_range)
+arm1020e_dma_clean_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
bic r0, r0, #CACHE_DLINESIZE - 1
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1020e_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm1020e_dma_clean_range
+ bcs arm1020e_dma_inv_range
+ b arm1020e_dma_flush_range
+ENDPROC(arm1020e_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1020e_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm1020e_dma_unmap_area)
+
ENTRY(arm1020e_cache_fns)
.long arm1020e_flush_kern_cache_all
.long arm1020e_flush_user_cache_all
.long arm1020e_coherent_kern_range
.long arm1020e_coherent_user_range
.long arm1020e_flush_kern_dcache_area
- .long arm1020e_dma_inv_range
- .long arm1020e_dma_clean_range
+ .long arm1020e_dma_map_area
+ .long arm1020e_dma_unmap_area
.long arm1020e_dma_flush_range
.align 5
*
* (same as v4wb)
*/
-ENTRY(arm1022_dma_inv_range)
+arm1022_dma_inv_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
tst r0, #CACHE_DLINESIZE - 1
*
* (same as v4wb)
*/
-ENTRY(arm1022_dma_clean_range)
+arm1022_dma_clean_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
bic r0, r0, #CACHE_DLINESIZE - 1
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1022_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm1022_dma_clean_range
+ bcs arm1022_dma_inv_range
+ b arm1022_dma_flush_range
+ENDPROC(arm1022_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1022_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm1022_dma_unmap_area)
+
ENTRY(arm1022_cache_fns)
.long arm1022_flush_kern_cache_all
.long arm1022_flush_user_cache_all
.long arm1022_coherent_kern_range
.long arm1022_coherent_user_range
.long arm1022_flush_kern_dcache_area
- .long arm1022_dma_inv_range
- .long arm1022_dma_clean_range
+ .long arm1022_dma_map_area
+ .long arm1022_dma_unmap_area
.long arm1022_dma_flush_range
.align 5
*
* (same as v4wb)
*/
-ENTRY(arm1026_dma_inv_range)
+arm1026_dma_inv_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
tst r0, #CACHE_DLINESIZE - 1
*
* (same as v4wb)
*/
-ENTRY(arm1026_dma_clean_range)
+arm1026_dma_clean_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
bic r0, r0, #CACHE_DLINESIZE - 1
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1026_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm1026_dma_clean_range
+ bcs arm1026_dma_inv_range
+ b arm1026_dma_flush_range
+ENDPROC(arm1026_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1026_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm1026_dma_unmap_area)
+
ENTRY(arm1026_cache_fns)
.long arm1026_flush_kern_cache_all
.long arm1026_flush_user_cache_all
.long arm1026_coherent_kern_range
.long arm1026_coherent_user_range
.long arm1026_flush_kern_dcache_area
- .long arm1026_dma_inv_range
- .long arm1026_dma_clean_range
+ .long arm1026_dma_map_area
+ .long arm1026_dma_unmap_area
.long arm1026_dma_flush_range
.align 5
*
* (same as v4wb)
*/
-ENTRY(arm920_dma_inv_range)
+arm920_dma_inv_range:
tst r0, #CACHE_DLINESIZE - 1
bic r0, r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
*
* (same as v4wb)
*/
-ENTRY(arm920_dma_clean_range)
+arm920_dma_clean_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm920_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm920_dma_clean_range
+ bcs arm920_dma_inv_range
+ b arm920_dma_flush_range
+ENDPROC(arm920_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm920_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm920_dma_unmap_area)
+
ENTRY(arm920_cache_fns)
.long arm920_flush_kern_cache_all
.long arm920_flush_user_cache_all
.long arm920_coherent_kern_range
.long arm920_coherent_user_range
.long arm920_flush_kern_dcache_area
- .long arm920_dma_inv_range
- .long arm920_dma_clean_range
+ .long arm920_dma_map_area
+ .long arm920_dma_unmap_area
.long arm920_dma_flush_range
#endif
*
* (same as v4wb)
*/
-ENTRY(arm922_dma_inv_range)
+arm922_dma_inv_range:
tst r0, #CACHE_DLINESIZE - 1
bic r0, r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
*
* (same as v4wb)
*/
-ENTRY(arm922_dma_clean_range)
+arm922_dma_clean_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm922_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm922_dma_clean_range
+ bcs arm922_dma_inv_range
+ b arm922_dma_flush_range
+ENDPROC(arm922_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm922_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm922_dma_unmap_area)
+
ENTRY(arm922_cache_fns)
.long arm922_flush_kern_cache_all
.long arm922_flush_user_cache_all
.long arm922_coherent_kern_range
.long arm922_coherent_user_range
.long arm922_flush_kern_dcache_area
- .long arm922_dma_inv_range
- .long arm922_dma_clean_range
+ .long arm922_dma_map_area
+ .long arm922_dma_unmap_area
.long arm922_dma_flush_range
#endif
*
* (same as v4wb)
*/
-ENTRY(arm925_dma_inv_range)
+arm925_dma_inv_range:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
tst r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
*
* (same as v4wb)
*/
-ENTRY(arm925_dma_clean_range)
+arm925_dma_clean_range:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm925_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm925_dma_clean_range
+ bcs arm925_dma_inv_range
+ b arm925_dma_flush_range
+ENDPROC(arm925_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm925_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm925_dma_unmap_area)
+
ENTRY(arm925_cache_fns)
.long arm925_flush_kern_cache_all
.long arm925_flush_user_cache_all
.long arm925_coherent_kern_range
.long arm925_coherent_user_range
.long arm925_flush_kern_dcache_area
- .long arm925_dma_inv_range
- .long arm925_dma_clean_range
+ .long arm925_dma_map_area
+ .long arm925_dma_unmap_area
.long arm925_dma_flush_range
ENTRY(cpu_arm925_dcache_clean_area)
*
* (same as v4wb)
*/
-ENTRY(arm926_dma_inv_range)
+arm926_dma_inv_range:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
tst r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
*
* (same as v4wb)
*/
-ENTRY(arm926_dma_clean_range)
+arm926_dma_clean_range:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm926_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm926_dma_clean_range
+ bcs arm926_dma_inv_range
+ b arm926_dma_flush_range
+ENDPROC(arm926_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm926_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm926_dma_unmap_area)
+
ENTRY(arm926_cache_fns)
.long arm926_flush_kern_cache_all
.long arm926_flush_user_cache_all
.long arm926_coherent_kern_range
.long arm926_coherent_user_range
.long arm926_flush_kern_dcache_area
- .long arm926_dma_inv_range
- .long arm926_dma_clean_range
+ .long arm926_dma_map_area
+ .long arm926_dma_unmap_area
.long arm926_dma_flush_range
ENTRY(cpu_arm926_dcache_clean_area)
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(arm940_dma_inv_range)
+arm940_dma_inv_range:
mov ip, #0
mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments
1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(arm940_dma_clean_range)
+arm940_dma_clean_range:
ENTRY(cpu_arm940_dcache_clean_area)
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm940_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm940_dma_clean_range
+ bcs arm940_dma_inv_range
+ b arm940_dma_flush_range
+ENDPROC(arm940_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm940_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm940_dma_unmap_area)
+
ENTRY(arm940_cache_fns)
.long arm940_flush_kern_cache_all
.long arm940_flush_user_cache_all
.long arm940_coherent_kern_range
.long arm940_coherent_user_range
.long arm940_flush_kern_dcache_area
- .long arm940_dma_inv_range
- .long arm940_dma_clean_range
+ .long arm940_dma_map_area
+ .long arm940_dma_unmap_area
.long arm940_dma_flush_range
__INIT
* - end - virtual end address
* (same as arm926)
*/
-ENTRY(arm946_dma_inv_range)
+arm946_dma_inv_range:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
tst r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
*
* (same as arm926)
*/
-ENTRY(arm946_dma_clean_range)
+arm946_dma_clean_range:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm946_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm946_dma_clean_range
+ bcs arm946_dma_inv_range
+ b arm946_dma_flush_range
+ENDPROC(arm946_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm946_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm946_dma_unmap_area)
+
ENTRY(arm946_cache_fns)
.long arm946_flush_kern_cache_all
.long arm946_flush_user_cache_all
.long arm946_coherent_kern_range
.long arm946_coherent_user_range
.long arm946_flush_kern_dcache_area
- .long arm946_dma_inv_range
- .long arm946_dma_clean_range
+ .long arm946_dma_map_area
+ .long arm946_dma_unmap_area
.long arm946_dma_flush_range
* (same as v4wb)
*/
.align 5
-ENTRY(feroceon_dma_inv_range)
+feroceon_dma_inv_range:
tst r0, #CACHE_DLINESIZE - 1
bic r0, r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
mov pc, lr
.align 5
-ENTRY(feroceon_range_dma_inv_range)
+feroceon_range_dma_inv_range:
mrs r2, cpsr
tst r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
* (same as v4wb)
*/
.align 5
-ENTRY(feroceon_dma_clean_range)
+feroceon_dma_clean_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
mov pc, lr
.align 5
-ENTRY(feroceon_range_dma_clean_range)
+feroceon_range_dma_clean_range:
mrs r2, cpsr
cmp r1, r0
subne r1, r1, #1 @ top address is inclusive
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(feroceon_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq feroceon_dma_clean_range
+ bcs feroceon_dma_inv_range
+ b feroceon_dma_flush_range
+ENDPROC(feroceon_dma_map_area)
+
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(feroceon_range_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq feroceon_range_dma_clean_range
+ bcs feroceon_range_dma_inv_range
+ b feroceon_range_dma_flush_range
+ENDPROC(feroceon_range_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(feroceon_dma_unmap_area)
+ mov pc, lr
+ENDPROC(feroceon_dma_unmap_area)
+
ENTRY(feroceon_cache_fns)
.long feroceon_flush_kern_cache_all
.long feroceon_flush_user_cache_all
.long feroceon_coherent_kern_range
.long feroceon_coherent_user_range
.long feroceon_flush_kern_dcache_area
- .long feroceon_dma_inv_range
- .long feroceon_dma_clean_range
+ .long feroceon_dma_map_area
+ .long feroceon_dma_unmap_area
.long feroceon_dma_flush_range
ENTRY(feroceon_range_cache_fns)
.long feroceon_coherent_kern_range
.long feroceon_coherent_user_range
.long feroceon_range_flush_kern_dcache_area
- .long feroceon_range_dma_inv_range
- .long feroceon_range_dma_clean_range
+ .long feroceon_range_dma_map_area
+ .long feroceon_dma_unmap_area
.long feroceon_range_dma_flush_range
.align 5
*
* (same as v4wb)
*/
-ENTRY(mohawk_dma_inv_range)
+mohawk_dma_inv_range:
tst r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
tst r1, #CACHE_DLINESIZE - 1
*
* (same as v4wb)
*/
-ENTRY(mohawk_dma_clean_range)
+mohawk_dma_clean_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(mohawk_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq mohawk_dma_clean_range
+ bcs mohawk_dma_inv_range
+ b mohawk_dma_flush_range
+ENDPROC(mohawk_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(mohawk_dma_unmap_area)
+ mov pc, lr
+ENDPROC(mohawk_dma_unmap_area)
+
ENTRY(mohawk_cache_fns)
.long mohawk_flush_kern_cache_all
.long mohawk_flush_user_cache_all
.long mohawk_coherent_kern_range
.long mohawk_coherent_user_range
.long mohawk_flush_kern_dcache_area
- .long mohawk_dma_inv_range
- .long mohawk_dma_clean_range
+ .long mohawk_dma_map_area
+ .long mohawk_dma_unmap_area
.long mohawk_dma_flush_range
ENTRY(cpu_mohawk_dcache_clean_area)
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(xsc3_dma_inv_range)
+xsc3_dma_inv_range:
tst r0, #CACHELINESIZE - 1
bic r0, r0, #CACHELINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean L1 D line
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(xsc3_dma_clean_range)
+xsc3_dma_clean_range:
bic r0, r0, #CACHELINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line
add r0, r0, #CACHELINESIZE
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(xsc3_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq xsc3_dma_clean_range
+ bcs xsc3_dma_inv_range
+ b xsc3_dma_flush_range
+ENDPROC(xsc3_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(xsc3_dma_unmap_area)
+ mov pc, lr
+ENDPROC(xsc3_dma_unmap_area)
+
ENTRY(xsc3_cache_fns)
.long xsc3_flush_kern_cache_all
.long xsc3_flush_user_cache_all
.long xsc3_coherent_kern_range
.long xsc3_coherent_user_range
.long xsc3_flush_kern_dcache_area
- .long xsc3_dma_inv_range
- .long xsc3_dma_clean_range
+ .long xsc3_dma_map_area
+ .long xsc3_dma_unmap_area
.long xsc3_dma_flush_range
ENTRY(cpu_xsc3_dcache_clean_area)
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(xscale_dma_inv_range)
+xscale_dma_inv_range:
tst r0, #CACHELINESIZE - 1
bic r0, r0, #CACHELINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(xscale_dma_clean_range)
+xscale_dma_clean_range:
bic r0, r0, #CACHELINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHELINESIZE
mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(xscale_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq xscale_dma_clean_range
+ bcs xscale_dma_inv_range
+ b xscale_dma_flush_range
+ENDPROC(xscale_dma_map_area)
+
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(xscale_dma_a0_map_area)
+ add r1, r1, r0
+ teq r2, #DMA_TO_DEVICE
+ beq xscale_dma_clean_range
+ b xscale_dma_flush_range
+ENDPROC(xscsale_dma_a0_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(xscale_dma_unmap_area)
+ mov pc, lr
+ENDPROC(xscale_dma_unmap_area)
+
ENTRY(xscale_cache_fns)
.long xscale_flush_kern_cache_all
.long xscale_flush_user_cache_all
.long xscale_coherent_kern_range
.long xscale_coherent_user_range
.long xscale_flush_kern_dcache_area
- .long xscale_dma_inv_range
- .long xscale_dma_clean_range
+ .long xscale_dma_map_area
+ .long xscale_dma_unmap_area
.long xscale_dma_flush_range
/*
.long xscale_coherent_kern_range
.long xscale_coherent_user_range
.long xscale_flush_kern_dcache_area
- .long xscale_dma_flush_range
- .long xscale_dma_clean_range
+ .long xscale_dma_a0_map_area
+ .long xscale_dma_unmap_area
.long xscale_dma_flush_range
ENTRY(cpu_xscale_dcache_clean_area)
--- /dev/null
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+#ifndef __PLAT_I2C_H
+#define __PLAT_I2C_H
+
+enum i2c_freq_mode {
+ I2C_FREQ_MODE_STANDARD, /* up to 100 Kb/s */
+ I2C_FREQ_MODE_FAST, /* up to 400 Kb/s */
+ I2C_FREQ_MODE_FAST_PLUS, /* up to 1 Mb/s */
+ I2C_FREQ_MODE_HIGH_SPEED /* up to 3.4 Mb/s */
+};
+
+/**
+ * struct nmk_i2c_controller - client specific controller configuration
+ * @clk_freq: clock frequency for the operation mode
+ * @slsu: Slave data setup time in ns.
+ * The needed setup time for three modes of operation
+ * are 250ns, 100ns and 10ns respectively thus leading
+ * to the values of 14, 6, 2 for a 48 MHz i2c clk
+ * @tft: Tx FIFO Threshold in bytes
+ * @rft: Rx FIFO Threshold in bytes
+ * @sm: speed mode
+ */
+struct nmk_i2c_controller {
+ unsigned long clk_freq;
+ unsigned short slsu;
+ unsigned char tft;
+ unsigned char rft;
+ enum i2c_freq_mode sm;
+};
+
+#endif /* __PLAT_I2C_H */
* linux/drivers/mmc/host/mmci.c - ARM PrimeCell MMCI PL180/1 driver
*
* Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ * Copyright (C) 2010 ST-Ericsson AB.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#define DRIVER_NAME "mmci-pl18x"
-#define DBG(host,fmt,args...) \
- pr_debug("%s: %s: " fmt, mmc_hostname(host->mmc), __func__ , args)
-
static unsigned int fmax = 515633;
/*
void __iomem *base;
int blksz_bits;
- DBG(host, "blksz %04x blks %04x flags %08x\n",
- data->blksz, data->blocks, data->flags);
+ dev_dbg(mmc_dev(host->mmc), "blksz %04x blks %04x flags %08x\n",
+ data->blksz, data->blocks, data->flags);
host->data = data;
host->size = data->blksz;
{
void __iomem *base = host->base;
- DBG(host, "op %02x arg %08x flags %08x\n",
+ dev_dbg(mmc_dev(host->mmc), "op %02x arg %08x flags %08x\n",
cmd->opcode, cmd->arg, cmd->flags);
if (readl(base + MMCICOMMAND) & MCI_CPSM_ENABLE) {
{
if (status & MCI_DATABLOCKEND) {
host->data_xfered += data->blksz;
+#ifdef CONFIG_ARCH_U300
+ /*
+ * On the U300 some signal or other is
+ * badly routed so that a data write does
+ * not properly terminate with a MCI_DATAEND
+ * status flag. This quirk will make writes
+ * work again.
+ */
+ if (data->flags & MMC_DATA_WRITE)
+ status |= MCI_DATAEND;
+#endif
}
if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
+ dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ (status %08x)\n", status);
if (status & MCI_DATACRCFAIL)
data->error = -EILSEQ;
else if (status & MCI_DATATIMEOUT)
status = readl(base + MMCISTATUS);
- DBG(host, "irq1 %08x\n", status);
+ dev_dbg(mmc_dev(host->mmc), "irq1 (pio) %08x\n", status);
do {
unsigned long flags;
status &= readl(host->base + MMCIMASK0);
writel(status, host->base + MMCICLEAR);
- DBG(host, "irq0 %08x\n", status);
+ dev_dbg(mmc_dev(host->mmc), "irq0 (data+cmd) %08x\n", status);
data = host->data;
if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|
WARN_ON(host->mrq != NULL);
if (mrq->data && !is_power_of_2(mrq->data->blksz)) {
- printk(KERN_ERR "%s: Unsupported block size (%d bytes)\n",
- mmc_hostname(mmc), mrq->data->blksz);
+ dev_err(mmc_dev(mmc), "unsupported block size (%d bytes)\n",
+ mrq->data->blksz);
mrq->cmd->error = -EINVAL;
mmc_request_done(mmc, mrq);
return;
host->hw_designer = amba_manf(dev);
host->hw_revision = amba_rev(dev);
- DBG(host, "designer ID = 0x%02x\n", host->hw_designer);
- DBG(host, "revision = 0x%01x\n", host->hw_revision);
+ dev_dbg(mmc_dev(mmc), "designer ID = 0x%02x\n", host->hw_designer);
+ dev_dbg(mmc_dev(mmc), "revision = 0x%01x\n", host->hw_revision);
host->clk = clk_get(&dev->dev, NULL);
if (IS_ERR(host->clk)) {
if (ret < 0)
goto clk_disable;
host->mclk = clk_get_rate(host->clk);
- DBG(host, "eventual mclk rate: %u Hz\n", host->mclk);
+ dev_dbg(mmc_dev(mmc), "eventual mclk rate: %u Hz\n",
+ host->mclk);
}
host->base = ioremap(dev->res.start, resource_size(&dev->res));
if (!host->base) {
mmc->ops = &mmci_ops;
mmc->f_min = (host->mclk + 511) / 512;
mmc->f_max = min(host->mclk, fmax);
+ dev_dbg(mmc_dev(mmc), "clocking block at %u Hz\n", mmc->f_max);
+
#ifdef CONFIG_REGULATOR
/* If we're using the regulator framework, try to fetch a regulator */
host->vcc = regulator_get(&dev->dev, "vmmc");
mmc_add_host(mmc);
- printk(KERN_INFO "%s: MMCI rev %x cfg %02x at 0x%016llx irq %d,%d\n",
+ dev_info(&dev->dev, "%s: MMCI rev %x cfg %02x at 0x%016llx irq %d,%d\n",
mmc_hostname(mmc), amba_rev(dev), amba_config(dev),
(unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]);
*
* Copyright 2006 (c) MontaVista Software, Inc.
*
+ * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ * Copyright 2010 (c) ST-Ericsson AB
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
#include <linux/interrupt.h>
#include <linux/amba/bus.h>
#include <linux/io.h>
+#include <linux/bcd.h>
+#include <linux/delay.h>
+#include <linux/version.h>
/*
* Register definitions
#define RTC_RIS 0x14 /* Raw interrupt status register */
#define RTC_MIS 0x18 /* Masked interrupt status register */
#define RTC_ICR 0x1c /* Interrupt clear register */
+/* ST variants have additional timer functionality */
+#define RTC_TDR 0x20 /* Timer data read register */
+#define RTC_TLR 0x24 /* Timer data load register */
+#define RTC_TCR 0x28 /* Timer control register */
+#define RTC_YDR 0x30 /* Year data read register */
+#define RTC_YMR 0x34 /* Year match register */
+#define RTC_YLR 0x38 /* Year data load register */
+
+#define RTC_CR_CWEN (1 << 26) /* Clockwatch enable bit */
+
+#define RTC_TCR_EN (1 << 1) /* Periodic timer enable bit */
+
+/* Common bit definitions for Interrupt status and control registers */
+#define RTC_BIT_AI (1 << 0) /* Alarm interrupt bit */
+#define RTC_BIT_PI (1 << 1) /* Periodic interrupt bit. ST variants only. */
+
+/* Common bit definations for ST v2 for reading/writing time */
+#define RTC_SEC_SHIFT 0
+#define RTC_SEC_MASK (0x3F << RTC_SEC_SHIFT) /* Second [0-59] */
+#define RTC_MIN_SHIFT 6
+#define RTC_MIN_MASK (0x3F << RTC_MIN_SHIFT) /* Minute [0-59] */
+#define RTC_HOUR_SHIFT 12
+#define RTC_HOUR_MASK (0x1F << RTC_HOUR_SHIFT) /* Hour [0-23] */
+#define RTC_WDAY_SHIFT 17
+#define RTC_WDAY_MASK (0x7 << RTC_WDAY_SHIFT) /* Day of Week [1-7] 1=Sunday */
+#define RTC_MDAY_SHIFT 20
+#define RTC_MDAY_MASK (0x1F << RTC_MDAY_SHIFT) /* Day of Month [1-31] */
+#define RTC_MON_SHIFT 25
+#define RTC_MON_MASK (0xF << RTC_MON_SHIFT) /* Month [1-12] 1=January */
+
+#define RTC_TIMER_FREQ 32768
struct pl031_local {
struct rtc_device *rtc;
void __iomem *base;
+ u8 hw_designer;
+ u8 hw_revision:4;
};
-static irqreturn_t pl031_interrupt(int irq, void *dev_id)
+static int pl031_alarm_irq_enable(struct device *dev,
+ unsigned int enabled)
+{
+ struct pl031_local *ldata = dev_get_drvdata(dev);
+ unsigned long imsc;
+
+ /* Clear any pending alarm interrupts. */
+ writel(RTC_BIT_AI, ldata->base + RTC_ICR);
+
+ imsc = readl(ldata->base + RTC_IMSC);
+
+ if (enabled == 1)
+ writel(imsc | RTC_BIT_AI, ldata->base + RTC_IMSC);
+ else
+ writel(imsc & ~RTC_BIT_AI, ldata->base + RTC_IMSC);
+
+ return 0;
+}
+
+/*
+ * Convert Gregorian date to ST v2 RTC format.
+ */
+static int pl031_stv2_tm_to_time(struct device *dev,
+ struct rtc_time *tm, unsigned long *st_time,
+ unsigned long *bcd_year)
+{
+ int year = tm->tm_year + 1900;
+ int wday = tm->tm_wday;
+
+ /* wday masking is not working in hardware so wday must be valid */
+ if (wday < -1 || wday > 6) {
+ dev_err(dev, "invalid wday value %d\n", tm->tm_wday);
+ return -EINVAL;
+ } else if (wday == -1) {
+ /* wday is not provided, calculate it here */
+ unsigned long time;
+ struct rtc_time calc_tm;
+
+ rtc_tm_to_time(tm, &time);
+ rtc_time_to_tm(time, &calc_tm);
+ wday = calc_tm.tm_wday;
+ }
+
+ *bcd_year = (bin2bcd(year % 100) | bin2bcd(year / 100) << 8);
+
+ *st_time = ((tm->tm_mon + 1) << RTC_MON_SHIFT)
+ | (tm->tm_mday << RTC_MDAY_SHIFT)
+ | ((wday + 1) << RTC_WDAY_SHIFT)
+ | (tm->tm_hour << RTC_HOUR_SHIFT)
+ | (tm->tm_min << RTC_MIN_SHIFT)
+ | (tm->tm_sec << RTC_SEC_SHIFT);
+
+ return 0;
+}
+
+/*
+ * Convert ST v2 RTC format to Gregorian date.
+ */
+static int pl031_stv2_time_to_tm(unsigned long st_time, unsigned long bcd_year,
+ struct rtc_time *tm)
+{
+ tm->tm_year = bcd2bin(bcd_year) + (bcd2bin(bcd_year >> 8) * 100);
+ tm->tm_mon = ((st_time & RTC_MON_MASK) >> RTC_MON_SHIFT) - 1;
+ tm->tm_mday = ((st_time & RTC_MDAY_MASK) >> RTC_MDAY_SHIFT);
+ tm->tm_wday = ((st_time & RTC_WDAY_MASK) >> RTC_WDAY_SHIFT) - 1;
+ tm->tm_hour = ((st_time & RTC_HOUR_MASK) >> RTC_HOUR_SHIFT);
+ tm->tm_min = ((st_time & RTC_MIN_MASK) >> RTC_MIN_SHIFT);
+ tm->tm_sec = ((st_time & RTC_SEC_MASK) >> RTC_SEC_SHIFT);
+
+ tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
+ tm->tm_year -= 1900;
+
+ return 0;
+}
+
+static int pl031_stv2_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct pl031_local *ldata = dev_get_drvdata(dev);
+
+ pl031_stv2_time_to_tm(readl(ldata->base + RTC_DR),
+ readl(ldata->base + RTC_YDR), tm);
+
+ return 0;
+}
+
+static int pl031_stv2_set_time(struct device *dev, struct rtc_time *tm)
+{
+ unsigned long time;
+ unsigned long bcd_year;
+ struct pl031_local *ldata = dev_get_drvdata(dev);
+ int ret;
+
+ ret = pl031_stv2_tm_to_time(dev, tm, &time, &bcd_year);
+ if (ret == 0) {
+ writel(bcd_year, ldata->base + RTC_YLR);
+ writel(time, ldata->base + RTC_LR);
+ }
+
+ return ret;
+}
+
+static int pl031_stv2_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
- struct rtc_device *rtc = dev_id;
+ struct pl031_local *ldata = dev_get_drvdata(dev);
+ int ret;
- rtc_update_irq(rtc, 1, RTC_AF);
+ ret = pl031_stv2_time_to_tm(readl(ldata->base + RTC_MR),
+ readl(ldata->base + RTC_YMR), &alarm->time);
- return IRQ_HANDLED;
+ alarm->pending = readl(ldata->base + RTC_RIS) & RTC_BIT_AI;
+ alarm->enabled = readl(ldata->base + RTC_IMSC) & RTC_BIT_AI;
+
+ return ret;
}
-static int pl031_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+static int pl031_stv2_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
struct pl031_local *ldata = dev_get_drvdata(dev);
+ unsigned long time;
+ unsigned long bcd_year;
+ int ret;
+
+ /* At the moment, we can only deal with non-wildcarded alarm times. */
+ ret = rtc_valid_tm(&alarm->time);
+ if (ret == 0) {
+ ret = pl031_stv2_tm_to_time(dev, &alarm->time,
+ &time, &bcd_year);
+ if (ret == 0) {
+ writel(bcd_year, ldata->base + RTC_YMR);
+ writel(time, ldata->base + RTC_MR);
+
+ pl031_alarm_irq_enable(dev, alarm->enabled);
+ }
+ }
+
+ return ret;
+}
+
+static irqreturn_t pl031_interrupt(int irq, void *dev_id)
+{
+ struct pl031_local *ldata = dev_id;
+ unsigned long rtcmis;
+ unsigned long events = 0;
+
+ rtcmis = readl(ldata->base + RTC_MIS);
+ if (rtcmis) {
+ writel(rtcmis, ldata->base + RTC_ICR);
+
+ if (rtcmis & RTC_BIT_AI)
+ events |= (RTC_AF | RTC_IRQF);
+
+ /* Timer interrupt is only available in ST variants */
+ if ((rtcmis & RTC_BIT_PI) &&
+ (ldata->hw_designer == AMBA_VENDOR_ST))
+ events |= (RTC_PF | RTC_IRQF);
+
+ rtc_update_irq(ldata->rtc, 1, events);
- switch (cmd) {
- case RTC_AIE_OFF:
- writel(1, ldata->base + RTC_MIS);
- return 0;
- case RTC_AIE_ON:
- writel(0, ldata->base + RTC_MIS);
- return 0;
+ return IRQ_HANDLED;
}
- return -ENOIOCTLCMD;
+ return IRQ_NONE;
}
static int pl031_read_time(struct device *dev, struct rtc_time *tm)
{
unsigned long time;
struct pl031_local *ldata = dev_get_drvdata(dev);
+ int ret;
- rtc_tm_to_time(tm, &time);
- writel(time, ldata->base + RTC_LR);
+ ret = rtc_tm_to_time(tm, &time);
- return 0;
+ if (ret == 0)
+ writel(time, ldata->base + RTC_LR);
+
+ return ret;
}
static int pl031_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
struct pl031_local *ldata = dev_get_drvdata(dev);
rtc_time_to_tm(readl(ldata->base + RTC_MR), &alarm->time);
- alarm->pending = readl(ldata->base + RTC_RIS);
- alarm->enabled = readl(ldata->base + RTC_IMSC);
+
+ alarm->pending = readl(ldata->base + RTC_RIS) & RTC_BIT_AI;
+ alarm->enabled = readl(ldata->base + RTC_IMSC) & RTC_BIT_AI;
return 0;
}
{
struct pl031_local *ldata = dev_get_drvdata(dev);
unsigned long time;
+ int ret;
+
+ /* At the moment, we can only deal with non-wildcarded alarm times. */
+ ret = rtc_valid_tm(&alarm->time);
+ if (ret == 0) {
+ ret = rtc_tm_to_time(&alarm->time, &time);
+ if (ret == 0) {
+ writel(time, ldata->base + RTC_MR);
+ pl031_alarm_irq_enable(dev, alarm->enabled);
+ }
+ }
+
+ return ret;
+}
+
+/* Periodic interrupt is only available in ST variants. */
+static int pl031_irq_set_state(struct device *dev, int enabled)
+{
+ struct pl031_local *ldata = dev_get_drvdata(dev);
+
+ if (enabled == 1) {
+ /* Clear any pending timer interrupt. */
+ writel(RTC_BIT_PI, ldata->base + RTC_ICR);
+
+ writel(readl(ldata->base + RTC_IMSC) | RTC_BIT_PI,
+ ldata->base + RTC_IMSC);
- rtc_tm_to_time(&alarm->time, &time);
+ /* Now start the timer */
+ writel(readl(ldata->base + RTC_TCR) | RTC_TCR_EN,
+ ldata->base + RTC_TCR);
- writel(time, ldata->base + RTC_MR);
- writel(!alarm->enabled, ldata->base + RTC_MIS);
+ } else {
+ writel(readl(ldata->base + RTC_IMSC) & (~RTC_BIT_PI),
+ ldata->base + RTC_IMSC);
+
+ /* Also stop the timer */
+ writel(readl(ldata->base + RTC_TCR) & (~RTC_TCR_EN),
+ ldata->base + RTC_TCR);
+ }
+ /* Wait at least 1 RTC32 clock cycle to ensure next access
+ * to RTC_TCR will succeed.
+ */
+ udelay(40);
return 0;
}
-static const struct rtc_class_ops pl031_ops = {
- .ioctl = pl031_ioctl,
- .read_time = pl031_read_time,
- .set_time = pl031_set_time,
- .read_alarm = pl031_read_alarm,
- .set_alarm = pl031_set_alarm,
-};
+static int pl031_irq_set_freq(struct device *dev, int freq)
+{
+ struct pl031_local *ldata = dev_get_drvdata(dev);
+
+ /* Cant set timer if it is already enabled */
+ if (readl(ldata->base + RTC_TCR) & RTC_TCR_EN) {
+ dev_err(dev, "can't change frequency while timer enabled\n");
+ return -EINVAL;
+ }
+
+ /* If self start bit in RTC_TCR is set timer will start here,
+ * but we never set that bit. Instead we start the timer when
+ * set_state is called with enabled == 1.
+ */
+ writel(RTC_TIMER_FREQ / freq, ldata->base + RTC_TLR);
+
+ return 0;
+}
static int pl031_remove(struct amba_device *adev)
{
{
int ret;
struct pl031_local *ldata;
+ struct rtc_class_ops *ops = id->data;
ret = amba_request_regions(adev, NULL);
if (ret)
goto err_req;
- ldata = kmalloc(sizeof(struct pl031_local), GFP_KERNEL);
+ ldata = kzalloc(sizeof(struct pl031_local), GFP_KERNEL);
if (!ldata) {
ret = -ENOMEM;
goto out;
}
ldata->base = ioremap(adev->res.start, resource_size(&adev->res));
+
if (!ldata->base) {
ret = -ENOMEM;
goto out_no_remap;
amba_set_drvdata(adev, ldata);
- if (request_irq(adev->irq[0], pl031_interrupt, IRQF_DISABLED,
- "rtc-pl031", ldata->rtc)) {
- ret = -EIO;
- goto out_no_irq;
- }
+ ldata->hw_designer = amba_manf(adev);
+ ldata->hw_revision = amba_rev(adev);
+
+ dev_dbg(&adev->dev, "designer ID = 0x%02x\n", ldata->hw_designer);
+ dev_dbg(&adev->dev, "revision = 0x%01x\n", ldata->hw_revision);
- ldata->rtc = rtc_device_register("pl031", &adev->dev, &pl031_ops,
- THIS_MODULE);
+ /* Enable the clockwatch on ST Variants */
+ if ((ldata->hw_designer == AMBA_VENDOR_ST) &&
+ (ldata->hw_revision > 1))
+ writel(readl(ldata->base + RTC_CR) | RTC_CR_CWEN,
+ ldata->base + RTC_CR);
+
+ ldata->rtc = rtc_device_register("pl031", &adev->dev, ops,
+ THIS_MODULE);
if (IS_ERR(ldata->rtc)) {
ret = PTR_ERR(ldata->rtc);
goto out_no_rtc;
}
+ if (request_irq(adev->irq[0], pl031_interrupt,
+ IRQF_DISABLED | IRQF_SHARED, "rtc-pl031", ldata)) {
+ ret = -EIO;
+ goto out_no_irq;
+ }
+
return 0;
-out_no_rtc:
- free_irq(adev->irq[0], ldata->rtc);
out_no_irq:
+ rtc_device_unregister(ldata->rtc);
+out_no_rtc:
iounmap(ldata->base);
amba_set_drvdata(adev, NULL);
out_no_remap:
out:
amba_release_regions(adev);
err_req:
+
return ret;
}
+/* Operations for the original ARM version */
+static struct rtc_class_ops arm_pl031_ops = {
+ .read_time = pl031_read_time,
+ .set_time = pl031_set_time,
+ .read_alarm = pl031_read_alarm,
+ .set_alarm = pl031_set_alarm,
+ .alarm_irq_enable = pl031_alarm_irq_enable,
+};
+
+/* The First ST derivative */
+static struct rtc_class_ops stv1_pl031_ops = {
+ .read_time = pl031_read_time,
+ .set_time = pl031_set_time,
+ .read_alarm = pl031_read_alarm,
+ .set_alarm = pl031_set_alarm,
+ .alarm_irq_enable = pl031_alarm_irq_enable,
+ .irq_set_state = pl031_irq_set_state,
+ .irq_set_freq = pl031_irq_set_freq,
+};
+
+/* And the second ST derivative */
+static struct rtc_class_ops stv2_pl031_ops = {
+ .read_time = pl031_stv2_read_time,
+ .set_time = pl031_stv2_set_time,
+ .read_alarm = pl031_stv2_read_alarm,
+ .set_alarm = pl031_stv2_set_alarm,
+ .alarm_irq_enable = pl031_alarm_irq_enable,
+ .irq_set_state = pl031_irq_set_state,
+ .irq_set_freq = pl031_irq_set_freq,
+};
+
static struct amba_id pl031_ids[] __initdata = {
{
.id = 0x00041031,
.mask = 0x000fffff,
+ .data = &arm_pl031_ops,
+ },
+ /* ST Micro variants */
+ {
+ .id = 0x00180031,
+ .mask = 0x00ffffff,
+ .data = &stv1_pl031_ops,
+ },
+ {
+ .id = 0x00280031,
+ .mask = 0x00ffffff,
+ .data = &stv2_pl031_ops,
},
{0, 0},
};
void *rx_end;
enum ssp_reading read;
enum ssp_writing write;
+ u32 exp_fifo_level;
};
/**
while (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
readw(SSP_DR(pl022->virtbase));
} while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_BSY) && limit--);
+
+ pl022->exp_fifo_level = 0;
+
return limit;
}
* errons in 8bit wide transfers on ARM variants (just 8 words
* FIFO, means only 8x8 = 64 bits in FIFO) at least.
*
- * FIXME: currently we have no logic to account for this.
- * perhaps there is even something broken in HW regarding
- * 8bit transfers (it doesn't fail on 16bit) so this needs
- * more investigation...
+ * To prevent this issue, the TX FIFO is only filled to the
+ * unused RX FIFO fill length, regardless of what the TX
+ * FIFO status flag indicates.
*/
dev_dbg(&pl022->adev->dev,
"%s, rx: %p, rxend: %p, tx: %p, txend: %p\n",
break;
}
pl022->rx += (pl022->cur_chip->n_bytes);
+ pl022->exp_fifo_level--;
}
/*
- * Write as much as you can, while keeping an eye on the RX FIFO!
+ * Write as much as possible up to the RX FIFO size
*/
- while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF)
+ while ((pl022->exp_fifo_level < pl022->vendor->fifodepth)
&& (pl022->tx < pl022->tx_end)) {
switch (pl022->write) {
case WRITING_NULL:
break;
}
pl022->tx += (pl022->cur_chip->n_bytes);
+ pl022->exp_fifo_level++;
/*
* This inner reader takes care of things appearing in the RX
* FIFO as we're transmitting. This will happen a lot since the
break;
}
pl022->rx += (pl022->cur_chip->n_bytes);
+ pl022->exp_fifo_level--;
}
}
/*
projects / mv-sheeva.git / commitdiff