m68knommu: make 532x UART platform addressing consistent

If we make all UART addressing consistent across all ColdFire family members
then we will be able to remove the duplicated plaform data and use a single
setup for all.

So modify the ColdFire 532x UART addressing so that:

. UARTs are numbered from 0 up
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
index ba4cc784f574a41837cf7a4ade8a3a6656917c96..f963d64c94e35d48accdc95ac52f716a39d85201 100644 (file)
--- a/arch/m68k/include/asm/m532xsim.h
+++ b/arch/m68k/include/asm/m532xsim.h
@@ -25,6 +25,10 @@
 #define MCFINT_UART2        28          /* Interrupt number for UART2 */
 #define MCFINT_QSPI         31          /* Interrupt number for QSPI */
 
+#define MCF_IRQ_UART0       (MCFINT_VECBASE + MCFINT_UART0)
+#define MCF_IRQ_UART1       (MCFINT_VECBASE + MCFINT_UART1)
+#define MCF_IRQ_UART2       (MCFINT_VECBASE + MCFINT_UART2)
+
 #define MCF_WTM_WCR    MCF_REG16(0xFC098000)
 
 /*
@@ -82,9 +86,9 @@
 /*
  *  UART module.
  */
-#define MCFUART_BASE1          0xFC060000      /* Base address of UART1 */
-#define MCFUART_BASE2          0xFC064000      /* Base address of UART2 */
-#define MCFUART_BASE3          0xFC068000      /* Base address of UART3 */
+#define MCFUART_BASE0          0xFC060000      /* Base address of UART1 */
+#define MCFUART_BASE1          0xFC064000      /* Base address of UART2 */
+#define MCFUART_BASE2          0xFC068000      /* Base address of UART3 */
 
 /*
  *  Timer module.

diff --git a/arch/m68k/platform/532x/config.c b/arch/m68k/platform/532x/config.c
index 3558a620a00cbba39842493e7c47f85dce821a27..ac86896c4fa2955e597e56a3a834d238d15646b1 100644 (file)
--- a/arch/m68k/platform/532x/config.c
+++ b/arch/m68k/platform/532x/config.c
@@ -35,16 +35,16 @@
 
 static struct mcf_platform_uart m532x_uart_platform[] = {
        {
-               .mapbase        = MCFUART_BASE1,
-               .irq            = MCFINT_VECBASE + MCFINT_UART0,
+               .mapbase        = MCFUART_BASE0,
+               .irq            = MCF_IRQ_UART0,
        },
        {
-               .mapbase        = MCFUART_BASE2,
-               .irq            = MCFINT_VECBASE + MCFINT_UART1,
+               .mapbase        = MCFUART_BASE1,
+               .irq            = MCF_IRQ_UART1,
        },
        {
-               .mapbase        = MCFUART_BASE3,
-               .irq            = MCFINT_VECBASE + MCFINT_UART2,
+               .mapbase        = MCFUART_BASE2,
+               .irq            = MCF_IRQ_UART2,
        },
        { },
 };