ARM: ux500: Remove redundant board file for mmci platform data

Since all platform data has been transfered to DT, we don't need the
container for the mmci platform data anymore. Remove the file and the
corresponding references to it's data.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index de544aabf292589a4de22a4c44e71d1b68476520..9741de956b3e98e10ec43d5c4cd1bff3f939ff9c 100644 (file)
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -5,8 +5,7 @@
 obj-y                          := cpu.o id.o timer.o pm.o
 obj-$(CONFIG_CACHE_L2X0)       += cache-l2x0.o
 obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o
-obj-$(CONFIG_MACH_MOP500)      += board-mop500-sdi.o \
-                               board-mop500-regulators.o \
+obj-$(CONFIG_MACH_MOP500)      += board-mop500-regulators.o \
                                board-mop500-audio.o
 obj-$(CONFIG_SMP)              += platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)      += hotplug.o

diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
deleted file mode 100644 (file)
index fcbf3a1..0000000
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Hanumath Prasad <hanumath.prasad@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/mmci.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/dma-ste-dma40.h>
-
-#include <asm/mach-types.h>
-
-#include "db8500-regs.h"
-#include "board-mop500.h"
-#include "ste-dma40-db8500.h"
-
-/*
- * v2 has a new version of this block that need to be forced, the number found
- * in hardware is incorrect
- */
-#define U8500_SDI_V2_PERIPHID 0x10480180
-
-/*
- * SDI 0 (MicroSD slot)
- */
-
-#ifdef CONFIG_STE_DMA40
-struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = {
-       .mode = STEDMA40_MODE_LOGICAL,
-       .dir = DMA_DEV_TO_MEM,
-       .dev_type = DB8500_DMA_DEV29_SD_MM0,
-};
-
-static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
-       .mode = STEDMA40_MODE_LOGICAL,
-       .dir = DMA_MEM_TO_DEV,
-       .dev_type = DB8500_DMA_DEV29_SD_MM0,
-};
-#endif
-
-struct mmci_platform_data mop500_sdi0_data = {
-       .f_max          = 100000000,
-       .capabilities   = MMC_CAP_4_BIT_DATA |
-                               MMC_CAP_SD_HIGHSPEED |
-                               MMC_CAP_MMC_HIGHSPEED |
-                               MMC_CAP_ERASE |
-                               MMC_CAP_UHS_SDR12 |
-                               MMC_CAP_UHS_SDR25,
-       .gpio_wp        = -1,
-       .sigdir         = MCI_ST_FBCLKEN |
-                               MCI_ST_CMDDIREN |
-                               MCI_ST_DATA0DIREN |
-                               MCI_ST_DATA2DIREN,
-#ifdef CONFIG_STE_DMA40
-       .dma_filter     = stedma40_filter,
-       .dma_rx_param   = &mop500_sdi0_dma_cfg_rx,
-       .dma_tx_param   = &mop500_sdi0_dma_cfg_tx,
-#endif
-};
-
-/*
- * SDI1 (SDIO WLAN)
- */
-#ifdef CONFIG_STE_DMA40
-static struct stedma40_chan_cfg sdi1_dma_cfg_rx = {
-       .mode = STEDMA40_MODE_LOGICAL,
-       .dir = DMA_DEV_TO_MEM,
-       .dev_type = DB8500_DMA_DEV32_SD_MM1,
-};
-
-static struct stedma40_chan_cfg sdi1_dma_cfg_tx = {
-       .mode = STEDMA40_MODE_LOGICAL,
-       .dir = DMA_MEM_TO_DEV,
-       .dev_type = DB8500_DMA_DEV32_SD_MM1,
-};
-#endif
-
-struct mmci_platform_data mop500_sdi1_data = {
-       .ocr_mask       = MMC_VDD_29_30,
-       .f_max          = 100000000,
-       .capabilities   = MMC_CAP_4_BIT_DATA |
-                               MMC_CAP_NONREMOVABLE,
-       .gpio_cd        = -1,
-       .gpio_wp        = -1,
-#ifdef CONFIG_STE_DMA40
-       .dma_filter     = stedma40_filter,
-       .dma_rx_param   = &sdi1_dma_cfg_rx,
-       .dma_tx_param   = &sdi1_dma_cfg_tx,
-#endif
-};
-
-/*
- * SDI 2 (POP eMMC, not on DB8500ed)
- */
-
-#ifdef CONFIG_STE_DMA40
-struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = {
-       .mode = STEDMA40_MODE_LOGICAL,
-       .dir = DMA_DEV_TO_MEM,
-       .dev_type =  DB8500_DMA_DEV28_SD_MM2,
-};
-
-static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
-       .mode = STEDMA40_MODE_LOGICAL,
-       .dir = DMA_MEM_TO_DEV,
-       .dev_type = DB8500_DMA_DEV28_SD_MM2,
-};
-#endif
-
-struct mmci_platform_data mop500_sdi2_data = {
-       .ocr_mask       = MMC_VDD_165_195,
-       .f_max          = 100000000,
-       .capabilities   = MMC_CAP_4_BIT_DATA |
-                               MMC_CAP_8_BIT_DATA |
-                               MMC_CAP_NONREMOVABLE |
-                               MMC_CAP_MMC_HIGHSPEED |
-                               MMC_CAP_ERASE |
-                               MMC_CAP_CMD23,
-       .gpio_cd        = -1,
-       .gpio_wp        = -1,
-#ifdef CONFIG_STE_DMA40
-       .dma_filter     = stedma40_filter,
-       .dma_rx_param   = &mop500_sdi2_dma_cfg_rx,
-       .dma_tx_param   = &mop500_sdi2_dma_cfg_tx,
-#endif
-};
-
-/*
- * SDI 4 (on-board eMMC)
- */
-
-#ifdef CONFIG_STE_DMA40
-struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = {
-       .mode = STEDMA40_MODE_LOGICAL,
-       .dir = DMA_DEV_TO_MEM,
-       .dev_type =  DB8500_DMA_DEV42_SD_MM4,
-};
-
-static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = {
-       .mode = STEDMA40_MODE_LOGICAL,
-       .dir = DMA_MEM_TO_DEV,
-       .dev_type = DB8500_DMA_DEV42_SD_MM4,
-};
-#endif
-
-struct mmci_platform_data mop500_sdi4_data = {
-       .f_max          = 100000000,
-       .capabilities   = MMC_CAP_4_BIT_DATA |
-                               MMC_CAP_8_BIT_DATA |
-                               MMC_CAP_NONREMOVABLE |
-                               MMC_CAP_MMC_HIGHSPEED |
-                               MMC_CAP_ERASE |
-                               MMC_CAP_CMD23,
-       .gpio_cd        = -1,
-       .gpio_wp        = -1,
-#ifdef CONFIG_STE_DMA40
-       .dma_filter     = stedma40_filter,
-       .dma_rx_param   = &mop500_sdi4_dma_cfg_rx,
-       .dma_tx_param   = &mop500_sdi4_dma_cfg_tx,
-#endif
-};

diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index 32cc0d8d8a0ed6576ebbc88a11081cc87d875086..7c7b0adca582ba4f60033c973fda80d66da626cf 100644 (file)
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -8,12 +8,7 @@
 #define __BOARD_MOP500_H
 
 #include <linux/platform_data/asoc-ux500-msp.h>
-#include <linux/amba/mmci.h>
 
-extern struct mmci_platform_data mop500_sdi0_data;
-extern struct mmci_platform_data mop500_sdi1_data;
-extern struct mmci_platform_data mop500_sdi2_data;
-extern struct mmci_platform_data mop500_sdi4_data;
 extern struct msp_i2s_platform_data msp0_platform_data;
 extern struct msp_i2s_platform_data msp1_platform_data;
 extern struct msp_i2s_platform_data msp2_platform_data;

diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 8820f602fcd2c59eba2d44075e0085da87a55855..fa308f07fae563b69c8aeb726f31ad641bc29167 100644 (file)
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -146,10 +146,6 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
        /* Requires call-back bindings. */
        OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
        /* Requires DMA bindings. */
-       OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0",  &mop500_sdi0_data),
-       OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1",  &mop500_sdi1_data),
-       OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2",  &mop500_sdi2_data),
-       OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4",  &mop500_sdi4_data),
        OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
                       "ux500-msp-i2s.0", &msp0_platform_data),
        OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,