wcn36xx: Update DT to support wcn36xx wifi driver

Signed-off-by: Yin, Fengwei <fengwei.yin@linaro.org>

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 0d00f9c0182dd4759dc053a0165bfb284559824d..7115ed1a2ff3e7d5ec3f5145e5e69077d686da13 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -788,7 +788,7 @@
                        };
                };
 
-               pronto_rproc {
+               pronto_rproc:pronto_rproc {
                        compatible = "qcom,tz-pil";
 
                        interrupts-extended = <&intc 0 149 1>,
@@ -821,6 +821,61 @@
 
                        memory-region = <&peripheral_mem>;
                };
+
+                qcom,wcn36xx@0a000000 {
+                        compatible = "qcom,wcn3620";
+                        reg = <0x0a000000 0x280000>,
+                                <0xb011008 0x04>,
+                                <0x0a21b000 0x3000>,
+                                <0x03204000 0x00000100>,
+                                <0x03200800 0x00000200>,
+                                <0x0A100400 0x00000200>,
+                                <0x0A205050 0x00000200>,
+                                <0x0A219000 0x00000020>,
+                                <0x0A080488 0x00000008>,
+                                <0x0A080fb0 0x00000008>,
+                                <0x0A08040c 0x00000008>,
+                                <0x0A0120a8 0x00000008>,
+                                <0x0A012448 0x00000008>,
+                                <0x0A080c00 0x00000001>;
+
+                        reg-names = "wcnss_mmio", "wcnss_fiq",
+                                    "pronto_phy_base", "riva_phy_base",
+                                    "riva_ccu_base", "pronto_a2xb_base",
+                                    "pronto_ccpu_base", "pronto_saw2_base",
+                                    "wlan_tx_phy_aborts","wlan_brdg_err_source",
+                                    "wlan_tx_status", "alarms_txctl",
+                                    "alarms_tactl", "pronto_mcu_base";
+
+                        interrupts = <0 145 0 0 146 0>;
+                        interrupt-names = "wcnss_wlantx_irq", "wcnss_wlanrx_irq";
+
+                        // qcom,pronto-vddmx-supply = <&pm8916_l3>;
+                        // qcom,pronto-vddcx-supply = <&pm8916_s1_corner>;
+                        // qcom,pronto-vddpx-supply = <&pm8916_l7>;
+                        // qcom,iris-vddxo-supply   = <&pm8916_l7>;
+                        // qcom,iris-vddrfa-supply  = <&pm8916_s3>;
+                        // qcom,iris-vddpa-supply   = <&pm8916_l9>;
+                        // qcom,iris-vdddig-supply  = <&pm8916_l5>;
+
+                        pinctrl-names = "wcnss_default";
+                        // pinctrl-names = "wcnss_default", "wcnss_sleep",
+                        //                                "wcnss_gpio_default";
+                        pinctrl-0 = <&wcnss_default>;
+                        // pinctrl-1 = <&wcnss_sleep>;
+                        // pinctrl-2 = <&wcnss_gpio_default>;
+
+                        // clocks = <&rpmcc RPM_XO_CLK_SRC>,
+                        //         <&rpmcc RPM_RF_CLK2>;
+                        //clock-names = "xo", "rf_clk";
+
+                       rproc = <&pronto_rproc>;
+                        qcom,has-autodetect-xo;
+                        qcom,wlan-rx-buff-count = <512>;
+                        qcom,is-pronto-vt;
+                        qcom,has-pronto-hw;
+                        // qcom,wcnss-adc_tm = <&pm8916_adc_tm>;
+                };
        };
 
        smd {
@@ -877,7 +932,7 @@
                        qcom,smd-edge = <6>;
                        qcom,remote-pid = <4>;
 
-                       bt {
+                               bt {
                                compatible = "qcom,hci-smd";
                                qcom,smd-channels = "APPS_RIVA_BT_CMD", "APPS_RIVA_BT_ACL";
                                qcom,smd-channel-names = "event", "data";
@@ -889,7 +944,7 @@
                        };
 
                        wifi {
-                               compatible = "qcom,wcn3680";
+                               compatible = "qcom,wlan-ctrl";
                                qcom,smd-channels = "WLAN_CTRL";
 
                                interrupts = <0 145 0>, <0 146 0>;
@@ -897,8 +952,8 @@
 
                                qcom,wcnss_mmio = <0xfb000000 0x21b000>;
 
-                               qcom,tx-enable-gpios = <&apps_smsm 10 0>;
-                               qcom,tx-rings-empty-gpios = <&apps_smsm 9 0>;
+                               // qcom,tx-enable-gpios = <&apps_smsm 10 0>;
+                               // qcom,tx-rings-empty-gpios = <&apps_smsm 9 0>;
                        };
 
                        wcnss_ctrl {