]> git.karo-electronics.de Git - karo-tx-linux.git/commitdiff
powerpc/usb: fix bug of CPU hang when missing USB PHY clock
authorShengzhou Liu <Shengzhou.Liu@freescale.com>
Wed, 22 Aug 2012 10:17:00 +0000 (18:17 +0800)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Wed, 5 Sep 2012 23:52:08 +0000 (16:52 -0700)
when missing USB PHY clock, kernel booting up will hang during USB
initialization. We should check USBGP[PHY_CLK_VALID] bit to avoid
CPU hanging in this case.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/host/ehci-fsl.c
drivers/usb/host/ehci-fsl.h
include/linux/fsl_devices.h

index b7451b29c5acbae4d0895035a04a6c2aa67e803d..11ff4b4dc7ad0e782ee9b8b0e02add9dd8aecb19 100644 (file)
@@ -210,11 +210,11 @@ static void usb_hcd_fsl_remove(struct usb_hcd *hcd,
        usb_put_hcd(hcd);
 }
 
-static void ehci_fsl_setup_phy(struct usb_hcd *hcd,
+static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
                               enum fsl_usb2_phy_modes phy_mode,
                               unsigned int port_offset)
 {
-       u32 portsc, temp;
+       u32 portsc;
        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
        void __iomem *non_ehci = hcd->regs;
        struct device *dev = hcd->self.controller;
@@ -232,9 +232,15 @@ static void ehci_fsl_setup_phy(struct usb_hcd *hcd,
        case FSL_USB2_PHY_ULPI:
                if (pdata->controller_ver) {
                        /* controller version 1.6 or above */
-                       temp = in_be32(non_ehci + FSL_SOC_USB_CTRL);
-                       out_be32(non_ehci + FSL_SOC_USB_CTRL, temp |
-                               USB_CTRL_USB_EN | ULPI_PHY_CLK_SEL);
+                       setbits32(non_ehci + FSL_SOC_USB_CTRL,
+                                       ULPI_PHY_CLK_SEL);
+                       /*
+                        * Due to controller issue of PHY_CLK_VALID in ULPI
+                        * mode, we set USB_CTRL_USB_EN before checking
+                        * PHY_CLK_VALID, otherwise PHY_CLK_VALID doesn't work.
+                        */
+                       clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
+                                       UTMI_PHY_EN, USB_CTRL_USB_EN);
                }
                portsc |= PORT_PTS_ULPI;
                break;
@@ -247,9 +253,7 @@ static void ehci_fsl_setup_phy(struct usb_hcd *hcd,
        case FSL_USB2_PHY_UTMI:
                if (pdata->controller_ver) {
                        /* controller version 1.6 or above */
-                       temp = in_be32(non_ehci + FSL_SOC_USB_CTRL);
-                       out_be32(non_ehci + FSL_SOC_USB_CTRL, temp |
-                               UTMI_PHY_EN | USB_CTRL_USB_EN);
+                       setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN);
                        mdelay(FSL_UTMI_PHY_DLY);  /* Delay for UTMI PHY CLK to
                                                become stable - 10ms*/
                }
@@ -262,23 +266,34 @@ static void ehci_fsl_setup_phy(struct usb_hcd *hcd,
        case FSL_USB2_PHY_NONE:
                break;
        }
+
+       if ((pdata->controller_ver) && ((phy_mode == FSL_USB2_PHY_ULPI) ||
+                       (phy_mode == FSL_USB2_PHY_UTMI))) {
+               /* check PHY_CLK_VALID to get phy clk valid */
+               if (!spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) &
+                               PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0)) {
+                       printk(KERN_WARNING "fsl-ehci: USB PHY clock invalid\n");
+                       return -EINVAL;
+               }
+       }
+
        ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
+
+       if (phy_mode != FSL_USB2_PHY_ULPI)
+               setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN);
+
+       return 0;
 }
 
-static void ehci_fsl_usb_setup(struct ehci_hcd *ehci)
+static int ehci_fsl_usb_setup(struct ehci_hcd *ehci)
 {
        struct usb_hcd *hcd = ehci_to_hcd(ehci);
        struct fsl_usb2_platform_data *pdata;
        void __iomem *non_ehci = hcd->regs;
-       u32 temp;
 
        pdata = hcd->self.controller->platform_data;
 
-       /* Enable PHY interface in the control reg. */
        if (pdata->have_sysif_regs) {
-               temp = in_be32(non_ehci + FSL_SOC_USB_CTRL);
-               out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | 0x00000004);
-
                /*
                * Turn on cache snooping hardware, since some PowerPC platforms
                * wholly rely on hardware to deal with cache coherent
@@ -293,7 +308,8 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci)
 
        if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
                        (pdata->operating_mode == FSL_USB2_DR_OTG))
-               ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0);
+               if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
+                       return -EINVAL;
 
        if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
                unsigned int chip, rev, svr;
@@ -307,9 +323,12 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci)
                        ehci->has_fsl_port_bug = 1;
 
                if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
-                       ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0);
+                       if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
+                               return -EINVAL;
+
                if (pdata->port_enables & FSL_USB2_PORT1_ENABLED)
-                       ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1);
+                       if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1))
+                               return -EINVAL;
        }
 
        if (pdata->have_sysif_regs) {
@@ -322,12 +341,15 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci)
 #endif
                out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001);
        }
+
+       return 0;
 }
 
 /* called after powerup, by probe or system-pm "wakeup" */
 static int ehci_fsl_reinit(struct ehci_hcd *ehci)
 {
-       ehci_fsl_usb_setup(ehci);
+       if (ehci_fsl_usb_setup(ehci))
+               return -EINVAL;
        ehci_port_power(ehci, 0);
 
        return 0;
index 88403684d10b4ae1c0571d3af6285fe6042cdd2c..dbd292e9f0a7d5a7a31b9a2dcb1bf968b2ed7fa4 100644 (file)
@@ -61,4 +61,5 @@
 #define PLL_RESET               (1<<8)
 #define UTMI_PHY_EN             (1<<9)
 #define ULPI_PHY_CLK_SEL        (1<<10)
+#define PHY_CLK_VALID          (1<<17)
 #endif                         /* _EHCI_FSL_H */
index 15be561e7397e68ba1f4fb8d4e8900afb4285e0a..ccfc4bb3dc4899272ced9dd40e33f5e410274704 100644 (file)
@@ -19,6 +19,7 @@
 
 #define FSL_UTMI_PHY_DLY       10      /*As per P1010RM, delay for UTMI
                                PHY CLK to become stable - 10ms*/
+#define FSL_USB_PHY_CLK_TIMEOUT        1000    /* uSec */
 #define FSL_USB_VER_OLD                0
 #define FSL_USB_VER_1_6                1
 #define FSL_USB_VER_2_2                2