]> git.karo-electronics.de Git - linux-beck.git/commitdiff
clk: add lpc18xx creg clk driver
authorJoachim Eastwood <manabian@gmail.com>
Thu, 3 Mar 2016 21:47:04 +0000 (22:47 +0100)
committerStephen Boyd <sboyd@codeaurora.org>
Fri, 4 Mar 2016 20:52:10 +0000 (12:52 -0800)
The CREG block on lpc18xx contains configuration register
for two low power clocks. Support enabling of these two
clocks with a clk driver that access CREG trough the
syscon regmap interface.

These clocks are needed to support peripherals like the
internal RTC on lpc18xx.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
drivers/clk/nxp/Makefile
drivers/clk/nxp/clk-lpc18xx-creg.c [new file with mode: 0644]

index 607bd48c656306a770f7fa9b651bc58791577b9e..d456ee6cc3d332e8bacb42ec94d5d4fb18171837 100644 (file)
@@ -1,3 +1,4 @@
 obj-$(CONFIG_ARCH_LPC18XX)     += clk-lpc18xx-cgu.o
 obj-$(CONFIG_ARCH_LPC18XX)     += clk-lpc18xx-ccu.o
+obj-$(CONFIG_ARCH_LPC18XX)     += clk-lpc18xx-creg.o
 obj-$(CONFIG_ARCH_LPC32XX)     += clk-lpc32xx.o
diff --git a/drivers/clk/nxp/clk-lpc18xx-creg.c b/drivers/clk/nxp/clk-lpc18xx-creg.c
new file mode 100644 (file)
index 0000000..d44b61a
--- /dev/null
@@ -0,0 +1,226 @@
+/*
+ * Clk driver for NXP LPC18xx/43xx Configuration Registers (CREG)
+ *
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define LPC18XX_CREG_CREG0                     0x004
+#define  LPC18XX_CREG_CREG0_EN1KHZ             BIT(0)
+#define  LPC18XX_CREG_CREG0_EN32KHZ            BIT(1)
+#define  LPC18XX_CREG_CREG0_RESET32KHZ         BIT(2)
+#define  LPC18XX_CREG_CREG0_PD32KHZ            BIT(3)
+
+#define to_clk_creg(_hw) container_of(_hw, struct clk_creg_data, hw)
+
+enum {
+       CREG_CLK_1KHZ,
+       CREG_CLK_32KHZ,
+       CREG_CLK_MAX,
+};
+
+struct clk_creg_data {
+       struct clk_hw hw;
+       const char *name;
+       struct regmap *reg;
+       unsigned int en_mask;
+       const struct clk_ops *ops;
+};
+
+#define CREG_CLK(_name, _emask, _ops)          \
+{                                              \
+       .name = _name,                          \
+       .en_mask = LPC18XX_CREG_CREG0_##_emask, \
+       .ops = &_ops,                           \
+}
+
+static int clk_creg_32k_prepare(struct clk_hw *hw)
+{
+       struct clk_creg_data *creg = to_clk_creg(hw);
+       int ret;
+
+       ret = regmap_update_bits(creg->reg, LPC18XX_CREG_CREG0,
+                                LPC18XX_CREG_CREG0_PD32KHZ |
+                                LPC18XX_CREG_CREG0_RESET32KHZ, 0);
+
+       /*
+        * Powering up the 32k oscillator takes a long while
+        * and sadly there aren't any status bit to poll.
+        */
+       msleep(2500);
+
+       return ret;
+}
+
+static void clk_creg_32k_unprepare(struct clk_hw *hw)
+{
+       struct clk_creg_data *creg = to_clk_creg(hw);
+
+       regmap_update_bits(creg->reg, LPC18XX_CREG_CREG0,
+                          LPC18XX_CREG_CREG0_PD32KHZ,
+                          LPC18XX_CREG_CREG0_PD32KHZ);
+}
+
+static int clk_creg_32k_is_prepared(struct clk_hw *hw)
+{
+       struct clk_creg_data *creg = to_clk_creg(hw);
+       u32 reg;
+
+       regmap_read(creg->reg, LPC18XX_CREG_CREG0, &reg);
+
+       return !(reg & LPC18XX_CREG_CREG0_PD32KHZ) &&
+              !(reg & LPC18XX_CREG_CREG0_RESET32KHZ);
+}
+
+static unsigned long clk_creg_1k_recalc_rate(struct clk_hw *hw,
+                                            unsigned long parent_rate)
+{
+       return parent_rate / 32;
+}
+
+static int clk_creg_enable(struct clk_hw *hw)
+{
+       struct clk_creg_data *creg = to_clk_creg(hw);
+
+       return regmap_update_bits(creg->reg, LPC18XX_CREG_CREG0,
+                                 creg->en_mask, creg->en_mask);
+}
+
+static void clk_creg_disable(struct clk_hw *hw)
+{
+       struct clk_creg_data *creg = to_clk_creg(hw);
+
+       regmap_update_bits(creg->reg, LPC18XX_CREG_CREG0,
+                          creg->en_mask, 0);
+}
+
+static int clk_creg_is_enabled(struct clk_hw *hw)
+{
+       struct clk_creg_data *creg = to_clk_creg(hw);
+       u32 reg;
+
+       regmap_read(creg->reg, LPC18XX_CREG_CREG0, &reg);
+
+       return !!(reg & creg->en_mask);
+}
+
+static const struct clk_ops clk_creg_32k = {
+       .enable         = clk_creg_enable,
+       .disable        = clk_creg_disable,
+       .is_enabled     = clk_creg_is_enabled,
+       .prepare        = clk_creg_32k_prepare,
+       .unprepare      = clk_creg_32k_unprepare,
+       .is_prepared    = clk_creg_32k_is_prepared,
+};
+
+static const struct clk_ops clk_creg_1k = {
+       .enable         = clk_creg_enable,
+       .disable        = clk_creg_disable,
+       .is_enabled     = clk_creg_is_enabled,
+       .recalc_rate    = clk_creg_1k_recalc_rate,
+};
+
+static struct clk_creg_data clk_creg_clocks[] = {
+       [CREG_CLK_1KHZ]  = CREG_CLK("1khz_clk",  EN1KHZ,  clk_creg_1k),
+       [CREG_CLK_32KHZ] = CREG_CLK("32khz_clk", EN32KHZ, clk_creg_32k),
+};
+
+static struct clk *clk_register_creg_clk(struct device *dev,
+                                        struct clk_creg_data *creg_clk,
+                                        const char **parent_name,
+                                        struct regmap *syscon)
+{
+       struct clk_init_data init;
+
+       init.ops = creg_clk->ops;
+       init.name = creg_clk->name;
+       init.parent_names = parent_name;
+       init.num_parents = 1;
+
+       creg_clk->reg = syscon;
+       creg_clk->hw.init = &init;
+
+       if (dev)
+               return devm_clk_register(dev, &creg_clk->hw);
+
+       return clk_register(NULL, &creg_clk->hw);
+}
+
+static struct clk *clk_creg_early[CREG_CLK_MAX];
+static struct clk_onecell_data clk_creg_early_data = {
+       .clks = clk_creg_early,
+       .clk_num = CREG_CLK_MAX,
+};
+
+static void __init lpc18xx_creg_clk_init(struct device_node *np)
+{
+       const char *clk_32khz_parent;
+       struct regmap *syscon;
+
+       syscon = syscon_node_to_regmap(np->parent);
+       if (IS_ERR(syscon)) {
+               pr_err("%s: syscon lookup failed\n", __func__);
+               return;
+       }
+
+       clk_32khz_parent = of_clk_get_parent_name(np, 0);
+
+       clk_creg_early[CREG_CLK_32KHZ] =
+               clk_register_creg_clk(NULL, &clk_creg_clocks[CREG_CLK_32KHZ],
+                                     &clk_32khz_parent, syscon);
+       clk_creg_early[CREG_CLK_1KHZ] = ERR_PTR(-EPROBE_DEFER);
+
+       of_clk_add_provider(np, of_clk_src_onecell_get, &clk_creg_early_data);
+}
+CLK_OF_DECLARE(lpc18xx_creg_clk, "nxp,lpc1850-creg-clk", lpc18xx_creg_clk_init);
+
+static struct clk *clk_creg[CREG_CLK_MAX];
+static struct clk_onecell_data clk_creg_data = {
+       .clks = clk_creg,
+       .clk_num = CREG_CLK_MAX,
+};
+
+static int lpc18xx_creg_clk_probe(struct platform_device *pdev)
+{
+       struct device_node *np = pdev->dev.of_node;
+       struct regmap *syscon;
+
+       syscon = syscon_node_to_regmap(np->parent);
+       if (IS_ERR(syscon)) {
+               dev_err(&pdev->dev, "syscon lookup failed\n");
+               return PTR_ERR(syscon);
+       }
+
+       clk_creg[CREG_CLK_32KHZ] = clk_creg_early[CREG_CLK_32KHZ];
+       clk_creg[CREG_CLK_1KHZ] =
+               clk_register_creg_clk(NULL, &clk_creg_clocks[CREG_CLK_1KHZ],
+                                     &clk_creg_clocks[CREG_CLK_32KHZ].name,
+                                     syscon);
+
+       return of_clk_add_provider(np, of_clk_src_onecell_get, &clk_creg_data);
+}
+
+static const struct of_device_id lpc18xx_creg_clk_of_match[] = {
+       { .compatible = "nxp,lpc1850-creg-clk" },
+       {},
+};
+
+static struct platform_driver lpc18xx_creg_clk_driver = {
+       .probe = lpc18xx_creg_clk_probe,
+       .driver = {
+               .name = "lpc18xx-creg-clk",
+               .of_match_table = lpc18xx_creg_clk_of_match,
+       },
+};
+builtin_platform_driver(lpc18xx_creg_clk_driver);