]> git.karo-electronics.de Git - mv-sheeva.git/commitdiff
[Blackfin] arch: Allow AD1836A board to be connected, either to SPORT2 or SPORT3.
authorBernd Schmidt <bernds_cb1@t-online.de>
Wed, 23 Apr 2008 21:19:02 +0000 (05:19 +0800)
committerBryan Wu <cooloney@kernel.org>
Wed, 23 Apr 2008 21:19:02 +0000 (05:19 +0800)
Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
arch/blackfin/mach-bf548/boards/ezkit.c

index acbfb0fc0289fba1e559ef6717545b346d9a0ac4..073bfdd56aa58666f16d74bea0e1dfaa37456623 100644 (file)
@@ -403,6 +403,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+       || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+       .enable_dma = 0,
+       .bits_per_word = 16,
+};
+#endif
+
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
        .cs_change_per_word = 0,
@@ -446,6 +454,16 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = {
                .mode = SPI_MODE_3,
        },
 #endif
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+       || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+       {
+               .modalias = "ad1836-spi",
+               .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+               .bus_num = 1,
+               .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+               .controller_data = &ad1836_spi_chip_info,
+       },
+#endif
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 {
        .modalias               = "ad7877",