select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
select NEED_MACH_GPIO_H
+ select SAMSUNG_WDT_RESET
+ select SAMSUNG_ATAGS
help
Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
SMDK6450.
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
select NEED_MACH_GPIO_H
+ select SAMSUNG_WDT_RESET
+ select SAMSUNG_ATAGS
help
Samsung S5PC100 series based systems
machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2
machine-$(CONFIG_ARCH_ORION5X) += orion5x
machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell
-machine-$(CONFIG_ARCH_PRIMA2) += prima2
+machine-$(CONFIG_ARCH_SIRF) += prima2
machine-$(CONFIG_ARCH_PXA) += pxa
machine-$(CONFIG_ARCH_REALVIEW) += realview
+ machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
machine-$(CONFIG_ARCH_RPC) += rpc
machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx
machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx
# endif
#endif
+#ifdef CONFIG_CPU_PJ4B
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_pj4b
+# endif
+#endif
+
+ #ifdef CONFIG_CPU_V7M
+ # ifdef CPU_NAME
+ # undef MULTI_CPU
+ # define MULTI_CPU
+ # else
+ # define CPU_NAME cpu_v7m
+ # endif
+ #endif
+
#ifndef MULTI_CPU
#define cpu_proc_init __glue(CPU_NAME,_proc_init)
#define cpu_proc_fin __glue(CPU_NAME,_proc_fin)
"I" (offsetof(struct stack, und[0])),
PLC (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
: "r14");
+ #endif
}
-int __cpu_logical_map[NR_CPUS];
+u32 __cpu_logical_map[NR_CPUS] = { [0 ... NR_CPUS-1] = MPIDR_INVALID };
void __init smp_setup_processor_id(void)
{
};
static struct omap_hwmod_rst_info am33xx_gfx_resets[] = {
- { .name = "gfx", .rst_shift = 0 },
+ { .name = "gfx", .rst_shift = 0, .st_shift = 0},
};
-static struct omap_hwmod_irq_info am33xx_gfx_irqs[] = {
- { .name = "gfxint", .irq = 37 + OMAP_INTC_START, },
- { .irq = -1 },
-};
-
static struct omap_hwmod am33xx_gfx_hwmod = {
.name = "gfx",
.class = &am33xx_gfx_hwmod_class,
* All enquiries to support@picochip.com
*/
#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/irqchip.h>
-#include <linux/irqdomain.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/of_irq.h>
#include <linux/of_platform.h>
- #include <linux/dw_apb_timer.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
.map_io = picoxcell_map_io,
- .init_time = dw_apb_timer_init,
- .nr_irqs = NR_IRQS_LEGACY,
- .init_irq = irqchip_init,
.init_machine = picoxcell_init_machine,
.dt_compat = picoxcell_dt_match,
.restart = picoxcell_wdt_restart,
DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express")
.dt_compat = v2m_dt_match,
.smp = smp_ops(vexpress_smp_ops),
+ .smp_init = smp_init_ops(vexpress_smp_init_ops),
.map_io = v2m_dt_map_io,
.init_early = v2m_dt_init_early,
- .init_irq = irqchip_init,
.init_time = v2m_dt_timer_init,
.init_machine = v2m_dt_init,
MACHINE_END
NULL
};
- extern struct smp_operations virt_smp_ops;
-
DT_MACHINE_START(VIRT, "Dummy Virtual Machine")
- .init_irq = irqchip_init,
.init_machine = virt_init,
- .smp = smp_ops(virt_smp_ops),
.dt_compat = virt_dt_match,
MACHINE_END
obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o
obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o
+obj-$(CONFIG_SAMSUNG_WDT_RESET) += watchdog-reset.o
- obj-$(CONFIG_S5P_PM) += s5p-pm.o s5p-irq-pm.o
+ obj-$(CONFIG_S5P_PM) += s5p-pm.o
+ obj-$(CONFIG_S5P_IRQ_PM) += s5p-irq-pm.o
obj-$(CONFIG_S5P_SLEEP) += s5p-sleep.o
port->mapbase = res->start;
port->irq = res2->start;
port->dev = &pdev->dev;
- port->uartclk = clk_get_rate(clk);
- port->private_data = clk;
+ port->uartclk = clk_get_rate(xuartps_data->refclk);
+ port->private_data = xuartps_data;
- dev_set_drvdata(&pdev->dev, port);
+ platform_set_drvdata(pdev, port);
rc = uart_add_one_port(&xuartps_uart_driver, port);
if (rc) {
dev_err(&pdev->dev,
"uart_add_one_port() failed; err=%i\n", rc);
- return rc;
- dev_set_drvdata(&pdev->dev, NULL);
+ goto err_out_clk_disable;
}
return 0;
}
**/
static int xuartps_remove(struct platform_device *pdev)
{
- struct uart_port *port = dev_get_drvdata(&pdev->dev);
+ struct uart_port *port = platform_get_drvdata(pdev);
- struct clk *clk = port->private_data;
+ struct xuartps *xuartps_data = port->private_data;
int rc;
/* Remove the xuartps port from the serial core */
rc = uart_remove_one_port(&xuartps_uart_driver, port);
- dev_set_drvdata(&pdev->dev, NULL);
port->mapbase = 0;
- clk_disable_unprepare(clk);
+ clk_disable_unprepare(xuartps_data->refclk);
+ clk_disable_unprepare(xuartps_data->aperclk);
+ clk_put(xuartps_data->refclk);
+ clk_put(xuartps_data->aperclk);
+ kfree(xuartps_data);
return rc;
}
projects / karo-tx-linux.git / commitdiff