out:
if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL))
- e_info("Smartspeed has downgraded the link speed from "
+ e_info(hw, "Smartspeed has downgraded the link speed from "
"the maximum advertised\n");
return status;
}
extern struct net_device *ixgbe_get_hw_dev(struct ixgbe_hw *hw);
#define hw_dbg(hw, format, arg...) \
netdev_dbg(ixgbe_get_hw_dev(hw), format, ##arg)
-#define e_err(format, arg...) \
- netdev_err(adapter->netdev, format, ## arg)
-#define e_info(format, arg...) \
- netdev_info(adapter->netdev, format, ## arg)
-#define e_warn(format, arg...) \
- netdev_warn(adapter->netdev, format, ## arg)
-#define e_notice(format, arg...) \
- netdev_notice(adapter->netdev, format, ## arg)
-#define e_crit(format, arg...) \
- netdev_crit(adapter->netdev, format, ## arg)
#define e_dev_info(format, arg...) \
dev_info(&adapter->pdev->dev, format, ## arg)
#define e_dev_warn(format, arg...) \
dev_err(&adapter->pdev->dev, format, ## arg)
#define e_dev_notice(format, arg...) \
dev_notice(&adapter->pdev->dev, format, ## arg)
-
+#define e_info(msglvl, format, arg...) \
+ netif_info(adapter, msglvl, adapter->netdev, format, ## arg)
+#define e_err(msglvl, format, arg...) \
+ netif_err(adapter, msglvl, adapter->netdev, format, ## arg)
+#define e_warn(msglvl, format, arg...) \
+ netif_warn(adapter, msglvl, adapter->netdev, format, ## arg)
+#define e_crit(msglvl, format, arg...) \
+ netif_crit(adapter, msglvl, adapter->netdev, format, ## arg)
#endif /* IXGBE_COMMON */
goto out;
if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) {
- e_err("Enable failed, needs MSI-X\n");
+ e_err(drv, "Enable failed, needs MSI-X\n");
err = 1;
goto out;
}
hw->mac.autotry_restart = true;
err = hw->mac.ops.setup_link(hw, advertised, true, true);
if (err) {
- e_info("setup link failed with code %d\n", err);
+ e_info(probe, "setup link failed with code %d\n", err);
hw->mac.ops.setup_link(hw, old, true, true);
}
} else {
writel((_test[pat] & W), (adapter->hw.hw_addr + R)); \
val = readl(adapter->hw.hw_addr + R); \
if (val != (_test[pat] & W & M)) { \
- e_err("pattern test reg %04X failed: got " \
- "0x%08X expected 0x%08X\n", \
+ e_err(drv, "pattern test reg %04X failed: got " \
+ "0x%08X expected 0x%08X\n", \
R, val, (_test[pat] & W & M)); \
*data = R; \
writel(before, adapter->hw.hw_addr + R); \
writel((W & M), (adapter->hw.hw_addr + R)); \
val = readl(adapter->hw.hw_addr + R); \
if ((W & M) != (val & M)) { \
- e_err("set/check reg %04X test failed: got 0x%08X " \
- "expected 0x%08X\n", R, (val & M), (W & M)); \
+ e_err(drv, "set/check reg %04X test failed: got 0x%08X " \
+ "expected 0x%08X\n", R, (val & M), (W & M)); \
*data = R; \
writel(before, (adapter->hw.hw_addr + R)); \
return 1; \
IXGBE_WRITE_REG(&adapter->hw, IXGBE_STATUS, toggle);
after = IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS) & toggle;
if (value != after) {
- e_err("failed STATUS register test got: 0x%08X expected: "
- "0x%08X\n", after, value);
+ e_err(drv, "failed STATUS register test got: 0x%08X "
+ "expected: 0x%08X\n", after, value);
*data = 1;
return 1;
}
*data = 1;
return -1;
}
- e_info("testing %s interrupt\n", shared_int ?
- "shared" : "unshared");
+ e_info(hw, "testing %s interrupt\n", shared_int ?
+ "shared" : "unshared");
/* Disable all the interrupts */
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF);
if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
/* Offline tests */
- e_info("offline testing starting\n");
+ e_info(hw, "offline testing starting\n");
/* Link test performed before hardware reset so autoneg doesn't
* interfere with test result */
else
ixgbe_reset(adapter);
- e_info("register testing starting\n");
+ e_info(hw, "register testing starting\n");
if (ixgbe_reg_test(adapter, &data[0]))
eth_test->flags |= ETH_TEST_FL_FAILED;
ixgbe_reset(adapter);
- e_info("eeprom testing starting\n");
+ e_info(hw, "eeprom testing starting\n");
if (ixgbe_eeprom_test(adapter, &data[1]))
eth_test->flags |= ETH_TEST_FL_FAILED;
ixgbe_reset(adapter);
- e_info("interrupt testing starting\n");
+ e_info(hw, "interrupt testing starting\n");
if (ixgbe_intr_test(adapter, &data[2]))
eth_test->flags |= ETH_TEST_FL_FAILED;
* loopback diagnostic. */
if (adapter->flags & (IXGBE_FLAG_SRIOV_ENABLED |
IXGBE_FLAG_VMDQ_ENABLED)) {
- e_info("Skip MAC loopback diagnostic in VT mode\n");
+ e_info(hw, "Skip MAC loopback diagnostic in VT "
+ "mode\n");
data[3] = 0;
goto skip_loopback;
}
ixgbe_reset(adapter);
- e_info("loopback testing starting\n");
+ e_info(hw, "loopback testing starting\n");
if (ixgbe_loopback_test(adapter, &data[3]))
eth_test->flags |= ETH_TEST_FL_FAILED;
if (if_running)
dev_open(netdev);
} else {
- e_info("online testing starting\n");
+ e_info(hw, "online testing starting\n");
/* Online tests */
if (ixgbe_link_test(adapter, &data[4]))
eth_test->flags |= ETH_TEST_FL_FAILED;
adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED;
if (netdev->features & NETIF_F_LRO) {
netdev->features &= ~NETIF_F_LRO;
- e_info("rx-usecs set to 0, disabling RSC\n");
+ e_info(probe, "rx-usecs set to 0, "
+ "disabling RSC\n");
}
need_reset = true;
}
} else if (!adapter->rx_itr_setting) {
netdev->features &= ~NETIF_F_LRO;
if (data & ETH_FLAG_LRO)
- e_info("rx-usecs set to 0, "
- "LRO/RSC cannot be enabled.\n");
+ e_info(probe, "rx-usecs set to 0, "
+ "LRO/RSC cannot be enabled.\n");
}
}
adapter = netdev_priv(netdev);
if (xid >= IXGBE_FCOE_DDP_MAX) {
- e_warn("xid=0x%x out-of-range\n", xid);
+ e_warn(drv, "xid=0x%x out-of-range\n", xid);
return 0;
}
fcoe = &adapter->fcoe;
if (!fcoe->pool) {
- e_warn("xid=0x%x no ddp pool for fcoe\n", xid);
+ e_warn(drv, "xid=0x%x no ddp pool for fcoe\n", xid);
return 0;
}
ddp = &fcoe->ddp[xid];
if (ddp->sgl) {
- e_err("xid 0x%x w/ non-null sgl=%p nents=%d\n",
- xid, ddp->sgl, ddp->sgc);
+ e_err(drv, "xid 0x%x w/ non-null sgl=%p nents=%d\n",
+ xid, ddp->sgl, ddp->sgc);
return 0;
}
ixgbe_fcoe_clear_ddp(ddp);
/* setup dma from scsi command sgl */
dmacount = pci_map_sg(adapter->pdev, sgl, sgc, DMA_FROM_DEVICE);
if (dmacount == 0) {
- e_err("xid 0x%x DMA map error\n", xid);
+ e_err(drv, "xid 0x%x DMA map error\n", xid);
return 0;
}
/* alloc the udl from our ddp pool */
ddp->udl = pci_pool_alloc(fcoe->pool, GFP_KERNEL, &ddp->udp);
if (!ddp->udl) {
- e_err("failed allocated ddp context\n");
+ e_err(drv, "failed allocated ddp context\n");
goto out_noddp_unmap;
}
ddp->sgl = sgl;
while (len) {
/* max number of buffers allowed in one DDP context */
if (j >= IXGBE_BUFFCNT_MAX) {
- e_err("xid=%x:%d,%d,%d:addr=%llx "
+ e_err(drv, "xid=%x:%d,%d,%d:addr=%llx "
"not enough descriptors\n",
xid, i, j, dmacount, (u64)addr);
goto out_noddp_free;
struct fc_frame_header *fh;
if (skb_is_gso(skb) && (skb_shinfo(skb)->gso_type != SKB_GSO_FCOE)) {
- e_err("Wrong gso type %d:expecting SKB_GSO_FCOE\n",
+ e_err(drv, "Wrong gso type %d:expecting SKB_GSO_FCOE\n",
skb_shinfo(skb)->gso_type);
return -EINVAL;
}
fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_SOF;
break;
default:
- e_warn("unknown sof = 0x%x\n", sof);
+ e_warn(drv, "unknown sof = 0x%x\n", sof);
return -EINVAL;
}
fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_A;
break;
default:
- e_warn("unknown eof = 0x%x\n", eof);
+ e_warn(drv, "unknown eof = 0x%x\n", eof);
return -EINVAL;
}
adapter->pdev, IXGBE_FCPTR_MAX,
IXGBE_FCPTR_ALIGN, PAGE_SIZE);
if (!fcoe->pool)
- e_err("failed to allocated FCoE DDP pool\n");
+ e_err(drv, "failed to allocated FCoE DDP pool\n");
spin_lock_init(&fcoe->lock);
}
if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
goto out_enable;
- e_info("Enabling FCoE offload features.\n");
+ e_info(drv, "Enabling FCoE offload features.\n");
if (netif_running(netdev))
netdev->netdev_ops->ndo_stop(netdev);
if (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED))
goto out_disable;
- e_info("Disabling FCoE offload features.\n");
+ e_info(drv, "Disabling FCoE offload features.\n");
if (netif_running(netdev))
netdev->netdev_ops->ndo_stop(netdev);
/* detected Tx unit hang */
union ixgbe_adv_tx_desc *tx_desc;
tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
- e_err("Detected Tx Unit Hang\n"
+ e_err(drv, "Detected Tx Unit Hang\n"
" Tx Queue <%d>\n"
" TDH, TDT <%x>, <%x>\n"
" next_to_use <%x>\n"
if (adapter->detect_tx_hung) {
if (ixgbe_check_tx_hang(adapter, tx_ring, i)) {
/* schedule immediate reset if we believe we hung */
- e_info("tx hang %d detected, resetting adapter\n",
- adapter->tx_timeout_count + 1);
+ e_info(probe, "tx hang %d detected, resetting "
+ "adapter\n", adapter->tx_timeout_count + 1);
ixgbe_tx_timeout(adapter->netdev);
}
}
return;
break;
}
- e_crit("Network adapter has been stopped because it "
- "has over heated. Restart the computer. If the problem "
+ e_crit(drv, "Network adapter has been stopped because it has "
+ "over heated. Restart the computer. If the problem "
"persists, power off the system and replace the "
"adapter\n");
/* write to clear the interrupt */
if ((adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) &&
(eicr & IXGBE_EICR_GPI_SDP1)) {
- e_crit("Fan has stopped, replace the adapter\n");
+ e_crit(probe, "Fan has stopped, replace the adapter\n");
/* write to clear the interrupt */
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1);
}
handler, 0, adapter->name[vector],
adapter->q_vector[vector]);
if (err) {
- e_err("request_irq failed for MSIX interrupt: "
+ e_err(probe, "request_irq failed for MSIX interrupt "
"Error: %d\n", err);
goto free_queue_irqs;
}
err = request_irq(adapter->msix_entries[vector].vector,
ixgbe_msix_lsc, 0, adapter->name[vector], netdev);
if (err) {
- e_err("request_irq for msix_lsc failed: %d\n", err);
+ e_err(probe, "request_irq for msix_lsc failed: %d\n", err);
goto free_queue_irqs;
}
}
if (err)
- e_err("request_irq failed, Error %d\n", err);
+ e_err(probe, "request_irq failed, Error %d\n", err);
return err;
}
map_vector_to_rxq(adapter, 0, 0);
map_vector_to_txq(adapter, 0, 0);
- e_info("Legacy interrupt IVAR setup done\n");
+ e_info(hw, "Legacy interrupt IVAR setup done\n");
}
/**
msleep(1);
}
if (k >= IXGBE_MAX_RX_DESC_POLL) {
- e_err("RXDCTL.ENABLE on Rx queue %d not set within "
+ e_err(drv, "RXDCTL.ENABLE on Rx queue %d not set within "
"the polling period\n", rxr);
}
ixgbe_release_rx_desc(&adapter->hw, adapter->rx_ring[rxr],
} while (--wait_loop &&
!(txdctl & IXGBE_TXDCTL_ENABLE));
if (!wait_loop)
- e_err("Could not enable Tx Queue %d\n", j);
+ e_err(drv, "Could not enable Tx Queue %d\n", j);
}
}
if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
if (esdp & IXGBE_ESDP_SDP1)
- e_crit("Fan has stopped, replace the adapter\n");
+ e_crit(drv, "Fan has stopped, replace the adapter\n");
}
/*
} else {
err = ixgbe_non_sfp_link_config(hw);
if (err)
- e_err("link_config FAILED %d\n", err);
+ e_err(probe, "link_config FAILED %d\n", err);
}
for (i = 0; i < adapter->num_tx_queues; i++)
adapter->num_tx_queues = 1;
#ifdef CONFIG_IXGBE_DCB
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
- e_info("FCoE enabled with DCB\n");
+ e_info(probe, "FCoE enabled with DCB\n");
ixgbe_set_dcb_queues(adapter);
}
#endif
if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
- e_info("FCoE enabled with RSS\n");
+ e_info(probe, "FCoE enabled with RSS\n");
if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
ixgbe_set_fdir_queues(adapter);
}
e_dev_info("Multiqueue %s: Rx Queue count = %u, Tx Queue count = %u\n",
- (adapter->num_rx_queues > 1) ? "Enabled" : "Disabled",
- adapter->num_rx_queues, adapter->num_tx_queues);
+ (adapter->num_rx_queues > 1) ? "Enabled" : "Disabled",
+ adapter->num_rx_queues, adapter->num_tx_queues);
set_bit(__IXGBE_DOWN, &adapter->state);
"supported module.\n");
unregister_netdev(adapter->netdev);
} else {
- e_info("detected SFP+: %d\n", hw->phy.sfp_type);
+ e_info(probe, "detected SFP+: %d\n", hw->phy.sfp_type);
}
/* don't need this routine any more */
clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
err:
vfree(tx_ring->tx_buffer_info);
tx_ring->tx_buffer_info = NULL;
- e_err("Unable to allocate memory for the Tx descriptor ring\n");
+ e_err(probe, "Unable to allocate memory for the Tx descriptor ring\n");
return -ENOMEM;
}
err = ixgbe_setup_tx_resources(adapter, adapter->tx_ring[i]);
if (!err)
continue;
- e_err("Allocation for Tx Queue %u failed\n", i);
+ e_err(probe, "Allocation for Tx Queue %u failed\n", i);
break;
}
if (!rx_ring->rx_buffer_info)
rx_ring->rx_buffer_info = vmalloc(size);
if (!rx_ring->rx_buffer_info) {
- e_err("vmalloc allocation failed for the Rx desc ring\n");
+ e_err(probe, "vmalloc allocation failed for the Rx "
+ "descriptor ring\n");
goto alloc_failed;
}
memset(rx_ring->rx_buffer_info, 0, size);
&rx_ring->dma, GFP_KERNEL);
if (!rx_ring->desc) {
- e_err("Memory allocation failed for the Rx desc ring\n");
+ e_err(probe, "Memory allocation failed for the Rx "
+ "descriptor ring\n");
vfree(rx_ring->rx_buffer_info);
goto alloc_failed;
}
err = ixgbe_setup_rx_resources(adapter, adapter->rx_ring[i]);
if (!err)
continue;
- e_err("Allocation for Rx Queue %u failed\n", i);
+ e_err(probe, "Allocation for Rx Queue %u failed\n", i);
break;
}
if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE))
return -EINVAL;
- e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
+ e_info(probe, "changing MTU from %d to %d\n", netdev->mtu, new_mtu);
/* must set new MTU before calling down or up */
netdev->mtu = new_mtu;
set_bit(__IXGBE_FDIR_INIT_DONE,
&(adapter->tx_ring[i]->reinit_state));
} else {
- e_err("failed to finish FDIR re-initialization, "
+ e_err(probe, "failed to finish FDIR re-initialization, "
"ignored adding FDIR ATR filters\n");
}
/* Done FDIR Re-initialization, enable transmits */
flow_tx = !!(rmcs & IXGBE_RMCS_TFCE_802_3X);
}
- e_info("NIC Link is Up %s, Flow Control: %s\n",
+ e_info(drv, "NIC Link is Up %s, Flow Control: %s\n",
(link_speed == IXGBE_LINK_SPEED_10GB_FULL ?
"10 Gbps" :
(link_speed == IXGBE_LINK_SPEED_1GB_FULL ?
adapter->link_up = false;
adapter->link_speed = 0;
if (netif_carrier_ok(netdev)) {
- e_info("NIC Link is Down\n");
+ e_info(drv, "NIC Link is Down\n");
netif_carrier_off(netdev);
}
}
break;
default:
if (unlikely(net_ratelimit())) {
- e_warn("partial checksum but "
- "proto=%x!\n", skb->protocol);
+ e_warn(probe, "partial checksum "
+ "but proto=%x!\n",
+ skb->protocol);
}
break;
}
adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED;
err = pci_enable_sriov(adapter->pdev, adapter->num_vfs);
if (err) {
- e_err("Failed to enable PCI sriov: %d\n", err);
+ e_err(probe, "Failed to enable PCI sriov: %d\n", err);
goto err_novfs;
}
/* If call to enable VFs succeeded then allocate memory
}
/* Oh oh */
- e_err("Unable to allocate memory for VF Data Storage - SRIOV "
- "disabled\n");
+ e_err(probe, "Unable to allocate memory for VF Data Storage - "
+ "SRIOV disabled\n");
pci_disable_sriov(adapter->pdev);
err_novfs:
if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
if (esdp & IXGBE_ESDP_SDP1)
- e_crit("Fan has stopped, replace the adapter\n");
+ e_crit(probe, "Fan has stopped, replace the adapter\n");
}
/* reset_hw fills in the perm_addr as well */
ixgbe_probe_vf(adapter, ii);
- netdev->features = NETIF_F_SG |
+ netdev->features = NETIF_F_SG |
NETIF_F_IP_CSUM |
NETIF_F_HW_VLAN_TX |
NETIF_F_HW_VLAN_RX |
}
#endif
if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
- e_info("IOV is enabled with %d VFs\n", adapter->num_vfs);
+ e_info(probe, "IOV is enabled with %d VFs\n", adapter->num_vfs);
for (i = 0; i < adapter->num_vfs; i++)
ixgbe_vf_configuration(pdev, (i | 0x10000000));
}
int err;
if (pci_enable_device_mem(pdev)) {
- e_err("Cannot re-enable PCI device after reset.\n");
+ e_err(probe, "Cannot re-enable PCI device after reset.\n");
result = PCI_ERS_RESULT_DISCONNECT;
} else {
pci_set_master(pdev);
if (netif_running(netdev)) {
if (ixgbe_up(adapter)) {
- e_info("ixgbe_up failed after reset\n");
+ e_info(probe, "ixgbe_up failed after reset\n");
return;
}
}
if (enable) {
random_ether_addr(vf_mac_addr);
- e_info("IOV: VF %d is enabled MAC %pM\n", vfn, vf_mac_addr);
+ e_info(probe, "IOV: VF %d is enabled MAC %pM\n",
+ vfn, vf_mac_addr);
/*
* Store away the VF "permananet" MAC address, it will ask
* for it later.
if (msgbuf[0] == IXGBE_VF_RESET) {
unsigned char *vf_mac = adapter->vfinfo[vf].vf_mac_addresses;
u8 *addr = (u8 *)(&msgbuf[1]);
- e_info("VF Reset msg received from vf %d\n", vf);
+ e_info(probe, "VF Reset msg received from vf %d\n", vf);
adapter->vfinfo[vf].clear_to_send = false;
ixgbe_vf_reset_msg(adapter, vf);
adapter->vfinfo[vf].clear_to_send = true;
retval = ixgbe_set_vf_vlan(adapter, add, vid, vf);
break;
default:
- e_err("Unhandled Msg %8.8x\n", msgbuf[0]);
+ e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]);
retval = IXGBE_ERR_MBX;
break;
}
projects / mv-sheeva.git / commitdiff