]> git.karo-electronics.de Git - mv-sheeva.git/commitdiff
parisc/PCI: get rid of device resource fixups
authorBjorn Helgaas <bhelgaas@google.com>
Fri, 24 Feb 2012 03:19:03 +0000 (20:19 -0700)
committerBjorn Helgaas <bhelgaas@google.com>
Fri, 24 Feb 2012 03:19:03 +0000 (20:19 -0700)
Tell the PCI core about host bridge address translation so it can take
care of bus-to-resource conversion for us.

CC: linux-parisc@vger.kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
arch/parisc/include/asm/pci.h
arch/parisc/kernel/pci.c
drivers/parisc/dino.c
drivers/parisc/lba_pci.c

index 2242a5c636c231ba4767c9c6988ca1048163b46e..a8b591fdd56487c40b643cdaeaa4671e56f604da 100644 (file)
@@ -82,38 +82,8 @@ struct pci_hba_data {
 
 #ifdef CONFIG_64BIT
 #define PCI_F_EXTEND           0xffffffff00000000UL
-#define PCI_IS_LMMIO(hba,a)    pci_is_lmmio(hba,a)
-
-/* We need to know if an address is LMMMIO or GMMIO.
- * LMMIO requires mangling and GMMIO we must use as-is.
- */
-static __inline__  int pci_is_lmmio(struct pci_hba_data *hba, unsigned long a)
-{
-       return(((a) & PCI_F_EXTEND) == PCI_F_EXTEND);
-}
-
-/*
-** Convert between PCI (IO_VIEW) addresses and processor (PA_VIEW) addresses.
-** See pci.c for more conversions used by Generic PCI code.
-**
-** Platform characteristics/firmware guarantee that
-**     (1) PA_VIEW - IO_VIEW = lmmio_offset for both LMMIO and ELMMIO
-**     (2) PA_VIEW == IO_VIEW for GMMIO
-*/
-#define PCI_BUS_ADDR(hba,a)    (PCI_IS_LMMIO(hba,a)    \
-               ?  ((a) - hba->lmmio_space_offset)      /* mangle LMMIO */ \
-               : (a))                                  /* GMMIO */
-#define PCI_HOST_ADDR(hba,a)   (((a) & PCI_F_EXTEND) == 0 \
-               ? (a) + hba->lmmio_space_offset \
-               : (a))
-
 #else  /* !CONFIG_64BIT */
-
-#define PCI_BUS_ADDR(hba,a)    (a)
-#define PCI_HOST_ADDR(hba,a)   (a)
 #define PCI_F_EXTEND           0UL
-#define PCI_IS_LMMIO(hba,a)    (1)     /* 32-bit doesn't support GMMIO */
-
 #endif /* !CONFIG_64BIT */
 
 /*
@@ -245,13 +215,7 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 }
 #endif
 
-extern void
-pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
-                        struct resource *res);
-
-extern void
-pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
-                       struct pci_bus_region *region);
+#define ARCH_HAS_GENERIC_PCI_OFFSETS
 
 static inline void pcibios_penalize_isa_irq(int irq, int active)
 {
index 9efd97405317726369599d9f11e797c5a48d687c..74d544b1cd224f1fc1967b0ca84f25b49dcc380f 100644 (file)
@@ -195,58 +195,6 @@ void __init pcibios_init_bus(struct pci_bus *bus)
        pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bridge_ctl);
 }
 
-/* called by drivers/pci/setup-bus.c:pci_setup_bridge().  */
-void __devinit pcibios_resource_to_bus(struct pci_dev *dev,
-               struct pci_bus_region *region, struct resource *res)
-{
-#ifdef CONFIG_64BIT
-       struct pci_hba_data *hba = HBA_DATA(dev->bus->bridge->platform_data);
-#endif
-
-       if (res->flags & IORESOURCE_IO) {
-               /*
-               ** I/O space may see busnumbers here. Something
-               ** in the form of 0xbbxxxx where bb is the bus num
-               ** and xxxx is the I/O port space address.
-               ** Remaining address translation are done in the
-               ** PCI Host adapter specific code - ie dino_out8.
-               */
-               region->start = PCI_PORT_ADDR(res->start);
-               region->end   = PCI_PORT_ADDR(res->end);
-       } else if (res->flags & IORESOURCE_MEM) {
-               /* Convert MMIO addr to PCI addr (undo global virtualization) */
-               region->start = PCI_BUS_ADDR(hba, res->start);
-               region->end   = PCI_BUS_ADDR(hba, res->end);
-       }
-
-       DBG_RES("pcibios_resource_to_bus(%02x %s [%lx,%lx])\n",
-               dev->bus->number, res->flags & IORESOURCE_IO ? "IO" : "MEM",
-               region->start, region->end);
-}
-
-void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
-                             struct pci_bus_region *region)
-{
-#ifdef CONFIG_64BIT
-       struct pci_hba_data *hba = HBA_DATA(dev->bus->bridge->platform_data);
-#endif
-
-       if (res->flags & IORESOURCE_MEM) {
-               res->start = PCI_HOST_ADDR(hba, region->start);
-               res->end = PCI_HOST_ADDR(hba, region->end);
-       }
-
-       if (res->flags & IORESOURCE_IO) {
-               res->start = region->start;
-               res->end = region->end;
-       }
-}
-
-#ifdef CONFIG_HOTPLUG
-EXPORT_SYMBOL(pcibios_resource_to_bus);
-EXPORT_SYMBOL(pcibios_bus_to_resource);
-#endif
-
 /*
  * pcibios align resources() is called every time generic PCI code
  * wants to generate a new address. The process of looking for
index 7ff10c1e8664806f941785619ed9fd8ed0582e71..0610e91bceb27ec5d7d71b7ddfedf5f6dbdb0d84 100644 (file)
@@ -553,7 +553,6 @@ dino_fixup_bus(struct pci_bus *bus)
        struct list_head *ln;
         struct pci_dev *dev;
         struct dino_device *dino_dev = DINO_DEV(parisc_walk_tree(bus->bridge));
-       int port_base = HBA_PORT_BASE(dino_dev->hba.hba_num);
 
        DBG(KERN_WARNING "%s(0x%p) bus %d platform_data 0x%p\n",
            __func__, bus, bus->secondary,
@@ -599,8 +598,6 @@ dino_fixup_bus(struct pci_bus *bus)
 
 
        list_for_each(ln, &bus->devices) {
-               int i;
-
                dev = pci_dev_b(ln);
                if (is_card_dino(&dino_dev->hba.dev->id))
                        dino_card_fixup(dev);
@@ -612,21 +609,6 @@ dino_fixup_bus(struct pci_bus *bus)
                if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)
                        continue;
 
-               /* Adjust the I/O Port space addresses */
-               for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-                       struct resource *res = &dev->resource[i];
-                       if (res->flags & IORESOURCE_IO) {
-                               res->start |= port_base;
-                               res->end |= port_base;
-                       }
-#ifdef __LP64__
-                       /* Sign Extend MMIO addresses */
-                       else if (res->flags & IORESOURCE_MEM) {
-                               res->start |= F_EXTEND(0UL);
-                               res->end   |= F_EXTEND(0UL);
-                       }
-#endif
-               }
                /* null out the ROM resource if there is one (we don't
                 * care about an expansion rom on parisc, since it
                 * usually contains (x86) bios code) */
@@ -991,11 +973,14 @@ static int __init dino_probe(struct parisc_device *dev)
 
        dev->dev.platform_data = dino_dev;
 
-       pci_add_resource(&resources, &dino_dev->hba.io_space);
+       pci_add_resource_offset(&resources, &dino_dev->hba.io_space,
+                               HBA_PORT_BASE(dino_dev->hba.hba_num));
        if (dino_dev->hba.lmmio_space.flags)
-               pci_add_resource(&resources, &dino_dev->hba.lmmio_space);
+               pci_add_resource_offset(&resources, &dino_dev->hba.lmmio_space,
+                                       dino_dev->hba.lmmio_space_offset);
        if (dino_dev->hba.elmmio_space.flags)
-               pci_add_resource(&resources, &dino_dev->hba.elmmio_space);
+               pci_add_resource_offset(&resources, &dino_dev->hba.elmmio_space,
+                                       dino_dev->hba.lmmio_space_offset);
        if (dino_dev->hba.gmmio_space.flags)
                pci_add_resource(&resources, &dino_dev->hba.gmmio_space);
 
index d5f3d753a108693abae1143f3a6f51959a4f4139..e8857647e21090c460d4a99a39102ea142698c88 100644 (file)
@@ -635,7 +635,6 @@ lba_fixup_bus(struct pci_bus *bus)
        u16 status;
 #endif
        struct lba_device *ldev = LBA_DEV(parisc_walk_tree(bus->bridge));
-       int lba_portbase = HBA_PORT_BASE(ldev->hba.hba_num);
 
        DBG("lba_fixup_bus(0x%p) bus %d platform_data 0x%p\n",
                bus, bus->secondary, bus->bridge->platform_data);
@@ -726,27 +725,6 @@ lba_fixup_bus(struct pci_bus *bus)
                        if (!res->start)
                                continue;
 
-                       if (res->flags & IORESOURCE_IO) {
-                               DBG("lba_fixup_bus() I/O Ports [%lx/%lx] -> ",
-                                       res->start, res->end);
-                               res->start |= lba_portbase;
-                               res->end   |= lba_portbase;
-                               DBG("[%lx/%lx]\n", res->start, res->end);
-                       } else if (res->flags & IORESOURCE_MEM) {
-                               /*
-                               ** Convert PCI (IO_VIEW) addresses to
-                               ** processor (PA_VIEW) addresses
-                                */
-                               DBG("lba_fixup_bus() MMIO [%lx/%lx] -> ",
-                                       res->start, res->end);
-                               res->start = PCI_HOST_ADDR(HBA_DATA(ldev), res->start);
-                               res->end   = PCI_HOST_ADDR(HBA_DATA(ldev), res->end);
-                               DBG("[%lx/%lx]\n", res->start, res->end);
-                       } else {
-                               DBG("lba_fixup_bus() WTF? 0x%lx [%lx/%lx] XXX",
-                                       res->flags, res->start, res->end);
-                       }
-
                        /*
                        ** FIXME: this will result in whinging for devices
                        ** that share expansion ROMs (think quad tulip), but
@@ -1514,11 +1492,14 @@ lba_driver_probe(struct parisc_device *dev)
                lba_dev->hba.lmmio_space.flags = 0;
        }
 
-       pci_add_resource(&resources, &lba_dev->hba.io_space);
+       pci_add_resource_offset(&resources, &lba_dev->hba.io_space,
+                               HBA_PORT_BASE(lba_dev->hba.hba_num));
        if (lba_dev->hba.elmmio_space.start)
-               pci_add_resource(&resources, &lba_dev->hba.elmmio_space);
+               pci_add_resource_offset(&resources, &lba_dev->hba.elmmio_space,
+                                       lba_dev->hba.lmmio_space_offset);
        if (lba_dev->hba.lmmio_space.flags)
-               pci_add_resource(&resources, &lba_dev->hba.lmmio_space);
+               pci_add_resource_offset(&resources, &lba_dev->hba.lmmio_space,
+                                       lba_dev->hba.lmmio_space_offset);
        if (lba_dev->hba.gmmio_space.flags)
                pci_add_resource(&resources, &lba_dev->hba.gmmio_space);