help
Say Y here to add some extra checks and diagnostics to PINCTRL calls.
-config PINCTRL_ABX500
- bool "ST-Ericsson ABx500 family Mixed Signal Circuit gpio functions"
- depends on AB8500_CORE
- select GENERIC_PINCONF
- help
- Select this to enable the ABx500 family IC GPIO driver
-
-config PINCTRL_AB8500
- bool "AB8500 pin controller driver"
- depends on PINCTRL_ABX500 && ARCH_U8500
-
-config PINCTRL_AB8540
- bool "AB8540 pin controller driver"
- depends on PINCTRL_ABX500 && ARCH_U8500
-
-config PINCTRL_AB9540
- bool "AB9540 pin controller driver"
- depends on PINCTRL_ABX500 && ARCH_U8500
-
-config PINCTRL_AB8505
- bool "AB8505 pin controller driver"
- depends on PINCTRL_ABX500 && ARCH_U8500
-
config PINCTRL_ADI2
bool "ADI pin controller driver"
depends on BLACKFIN
bool
select PINCTRL_MXS
-config PINCTRL_NOMADIK
- bool "Nomadik pin controller driver"
- depends on ARCH_U8500 || ARCH_NOMADIK
- select PINMUX
- select PINCONF
- select GPIOLIB
- select OF_GPIO
- select GPIOLIB_IRQCHIP
-
-config PINCTRL_STN8815
- bool "STN8815 pin controller driver"
- depends on PINCTRL_NOMADIK && ARCH_NOMADIK
-
-config PINCTRL_DB8500
- bool "DB8500 pin controller driver"
- depends on PINCTRL_NOMADIK && ARCH_U8500
-
-config PINCTRL_DB8540
- bool "DB8540 pin controller driver"
- depends on PINCTRL_NOMADIK && ARCH_U8500
-
config PINCTRL_ROCKCHIP
bool
select PINMUX
source "drivers/pinctrl/berlin/Kconfig"
source "drivers/pinctrl/mvebu/Kconfig"
+source "drivers/pinctrl/nomadik/Kconfig"
source "drivers/pinctrl/qcom/Kconfig"
source "drivers/pinctrl/samsung/Kconfig"
source "drivers/pinctrl/sh-pfc/Kconfig"
obj-$(CONFIG_PINCTRL) += devicetree.o
endif
obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o
-obj-$(CONFIG_PINCTRL_ABX500) += pinctrl-abx500.o
-obj-$(CONFIG_PINCTRL_AB8500) += pinctrl-ab8500.o
-obj-$(CONFIG_PINCTRL_AB8540) += pinctrl-ab8540.o
-obj-$(CONFIG_PINCTRL_AB9540) += pinctrl-ab9540.o
-obj-$(CONFIG_PINCTRL_AB8505) += pinctrl-ab8505.o
obj-$(CONFIG_PINCTRL_ADI2) += pinctrl-adi2.o
obj-$(CONFIG_PINCTRL_AS3722) += pinctrl-as3722.o
obj-$(CONFIG_PINCTRL_BF54x) += pinctrl-adi2-bf54x.o
obj-$(CONFIG_PINCTRL_IMX23) += pinctrl-imx23.o
obj-$(CONFIG_PINCTRL_IMX25) += pinctrl-imx25.o
obj-$(CONFIG_PINCTRL_IMX28) += pinctrl-imx28.o
-obj-$(CONFIG_PINCTRL_NOMADIK) += pinctrl-nomadik.o
-obj-$(CONFIG_PINCTRL_STN8815) += pinctrl-nomadik-stn8815.o
-obj-$(CONFIG_PINCTRL_DB8500) += pinctrl-nomadik-db8500.o
-obj-$(CONFIG_PINCTRL_DB8540) += pinctrl-nomadik-db8540.o
obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o
obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o
obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o
obj-$(CONFIG_ARCH_BERLIN) += berlin/
obj-$(CONFIG_PLAT_ORION) += mvebu/
+obj-y += nomadik/
obj-$(CONFIG_ARCH_QCOM) += qcom/
obj-$(CONFIG_PLAT_SAMSUNG) += samsung/
obj-$(CONFIG_ARCH_SHMOBILE) += sh-pfc/
--- /dev/null
+if ARCH_U8500
+
+config PINCTRL_ABX500
+ bool "ST-Ericsson ABx500 family Mixed Signal Circuit gpio functions"
+ depends on AB8500_CORE
+ select GENERIC_PINCONF
+ help
+ Select this to enable the ABx500 family IC GPIO driver
+
+config PINCTRL_AB8500
+ bool "AB8500 pin controller driver"
+ depends on PINCTRL_ABX500 && ARCH_U8500
+
+config PINCTRL_AB8540
+ bool "AB8540 pin controller driver"
+ depends on PINCTRL_ABX500 && ARCH_U8500
+
+config PINCTRL_AB9540
+ bool "AB9540 pin controller driver"
+ depends on PINCTRL_ABX500 && ARCH_U8500
+
+config PINCTRL_AB8505
+ bool "AB8505 pin controller driver"
+ depends on PINCTRL_ABX500 && ARCH_U8500
+
+endif
+
+if (ARCH_U8500 || ARCH_NOMADIK)
+
+config PINCTRL_NOMADIK
+ bool "Nomadik pin controller driver"
+ depends on ARCH_U8500 || ARCH_NOMADIK
+ select PINMUX
+ select PINCONF
+ select GPIOLIB
+ select OF_GPIO
+ select GPIOLIB_IRQCHIP
+
+config PINCTRL_STN8815
+ bool "STN8815 pin controller driver"
+ depends on PINCTRL_NOMADIK && ARCH_NOMADIK
+
+config PINCTRL_DB8500
+ bool "DB8500 pin controller driver"
+ depends on PINCTRL_NOMADIK && ARCH_U8500
+
+config PINCTRL_DB8540
+ bool "DB8540 pin controller driver"
+ depends on PINCTRL_NOMADIK && ARCH_U8500
+
+endif
--- /dev/null
+# Nomadik family pin control drivers
+obj-$(CONFIG_PINCTRL_ABX500) += pinctrl-abx500.o
+obj-$(CONFIG_PINCTRL_AB8500) += pinctrl-ab8500.o
+obj-$(CONFIG_PINCTRL_AB8540) += pinctrl-ab8540.o
+obj-$(CONFIG_PINCTRL_AB9540) += pinctrl-ab9540.o
+obj-$(CONFIG_PINCTRL_AB8505) += pinctrl-ab8505.o
+obj-$(CONFIG_PINCTRL_NOMADIK) += pinctrl-nomadik.o
+obj-$(CONFIG_PINCTRL_STN8815) += pinctrl-nomadik-stn8815.o
+obj-$(CONFIG_PINCTRL_DB8500) += pinctrl-nomadik-db8500.o
+obj-$(CONFIG_PINCTRL_DB8540) += pinctrl-nomadik-db8540.o
#include <linux/pinctrl/machine.h>
#include "pinctrl-abx500.h"
-#include "core.h"
-#include "pinconf.h"
+#include "../core.h"
+#include "../pinconf.h"
/*
* The AB9540 and AB8540 GPIO support are extended versions
/* Since we request GPIOs from ourself */
#include <linux/pinctrl/consumer.h>
#include "pinctrl-nomadik.h"
-#include "core.h"
+#include "../core.h"
/*
* The GPIO module in the Nomadik family of Systems-on-Chip is an