module_param(ifname, charp, S_IRUGO|S_IWUSR);
//module_param(hwseqnum,int, S_IRUGO|S_IWUSR);
-module_param(hwwep,int, S_IRUGO|S_IWUSR);
-module_param(channels,int, S_IRUGO|S_IWUSR);
+module_param(hwwep, int, S_IRUGO|S_IWUSR);
+module_param(channels, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(ifname," Net interface name, wlan%d=default");
+MODULE_PARM_DESC(ifname, " Net interface name, wlan%d=default");
//MODULE_PARM_DESC(hwseqnum," Try to use hardware 802.11 header sequence numbers. Zero=default");
-MODULE_PARM_DESC(hwwep," Try to use hardware security support. ");
-MODULE_PARM_DESC(channels," Channel bitmask for specific locales. NYI");
+MODULE_PARM_DESC(hwwep, " Try to use hardware security support. ");
+MODULE_PARM_DESC(channels, " Channel bitmask for specific locales. NYI");
static int rtl8192_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id);
static int proc_get_registers(struct seq_file *m, void *v)
{
struct net_device *dev = m->private;
- int i,n, max = 0xff;
+ int i, n, max = 0xff;
seq_puts(m, "\n####################page 0##################\n ");
for (n = 0; n <= max;) {
//printk( "\nD: %2x> ", n);
- seq_printf(m, "\nD: %2x > ",n);
+ seq_printf(m, "\nD: %2x > ", n);
- for (i = 0; i < 16 && n <= max; i++,n++)
- seq_printf(m, "%2x ",read_nic_byte(dev,0x000|n));
+ for (i = 0; i < 16 && n <= max; i++, n++)
+ seq_printf(m, "%2x ", read_nic_byte(dev, 0x000|n));
// printk("%2x ",read_nic_byte(dev,n));
}
seq_puts(m, "\n####################page 1##################\n ");
for (n = 0; n <= max;) {
//printk( "\nD: %2x> ", n);
- seq_printf(m, "\nD: %2x > ",n);
+ seq_printf(m, "\nD: %2x > ", n);
- for (i = 0; i < 16 && n <= max; i++,n++)
- seq_printf(m, "%2x ",read_nic_byte(dev,0x100|n));
+ for (i = 0; i < 16 && n <= max; i++, n++)
+ seq_printf(m, "%2x ", read_nic_byte(dev, 0x100|n));
// printk("%2x ",read_nic_byte(dev,n));
}
seq_puts(m, "\n####################page 3##################\n ");
for (n = 0; n <= max;) {
//printk( "\nD: %2x> ", n);
- seq_printf(m, "\nD: %2x > ",n);
+ seq_printf(m, "\nD: %2x > ", n);
- for (i = 0; i < 16 && n <= max; i++,n++)
- seq_printf(m, "%2x ",read_nic_byte(dev,0x300|n));
+ for (i = 0; i < 16 && n <= max; i++, n++)
+ seq_printf(m, "%2x ", read_nic_byte(dev, 0x300|n));
// printk("%2x ",read_nic_byte(dev,n));
}
int i;
u8 *buf = (u8 *)buffer;
- printk("ASCII BUFFER DUMP (len: %x):\n",len);
+ printk("ASCII BUFFER DUMP (len: %x):\n", len);
for (i = 0; i < len; i++)
- printk("%c",buf[i]);
+ printk("%c", buf[i]);
- printk("\nBINARY BUFFER DUMP (len: %x):\n",len);
+ printk("\nBINARY BUFFER DUMP (len: %x):\n", len);
for (i = 0; i < len; i++)
- printk("%x",buf[i]);
+ printk("%x", buf[i]);
printk("\n");
}
//short check_nic_enough_desc(struct net_device *dev, priority_t priority)
-short check_nic_enough_desc(struct net_device *dev,int queue_index)
+short check_nic_enough_desc(struct net_device *dev, int queue_index)
{
struct r8192_priv *priv = ieee80211_priv(dev);
int used = atomic_read(&priv->tx_pending[queue_index]);
{
int i;
for (i = 0; i < 63; i++)
- RT_TRACE(COMP_EPROM, "EEPROM addr %x : %x", i, eprom_read(dev,i));
+ RT_TRACE(COMP_EPROM, "EEPROM addr %x : %x", i, eprom_read(dev, i));
}
/* this is only for debug */
for (n = 0; n <= max;)
{
printk("\nD: %2x> ", n);
- for (i = 0; i < 16 && n <= max; i++,n++)
- printk("%2x ",read_nic_byte(dev,n));
+ for (i = 0; i < 16 && n <= max; i++, n++)
+ printk("%2x ", read_nic_byte(dev, n));
}
printk("\n");
}
*****************************************************************************/
-void rtl8192_set_mode(struct net_device *dev,int mode)
+void rtl8192_set_mode(struct net_device *dev, int mode)
{
u8 ecmd;
ecmd = read_nic_byte(dev, EPROM_CMD);
write_nic_byte(dev, MSR, msr);
}
-void rtl8192_set_chan(struct net_device *dev,short ch)
+void rtl8192_set_chan(struct net_device *dev, short ch)
{
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
// u32 tx;
//need to implement rf set channel here WB
if (priv->rf_set_chan)
- priv->rf_set_chan(dev,priv->chan);
+ priv->rf_set_chan(dev, priv->chan);
mdelay(10);
// write_nic_dword(dev,TX_CONF,tx | (TX_LOOPBACK_NONE<<TX_LOOPBACK_SHIFT));
#endif
/* command packet rx procedure */
while (skb_queue_len(&priv->rx_queue) < MAX_RX_URB + 3) {
// printk("command packet IN request!\n");
- skb = __dev_alloc_skb(RX_URB_SIZE ,GFP_KERNEL);
+ skb = __dev_alloc_skb(RX_URB_SIZE, GFP_KERNEL);
if (!skb)
break;
entry = usb_alloc_urb(0, GFP_KERNEL);
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
u32 rxconf;
- rxconf = read_nic_dword(dev,RCR);
+ rxconf = read_nic_dword(dev, RCR);
rxconf = rxconf & ~MAC_FILTER_MASK;
rxconf = rxconf | RCR_AMF;
rxconf = rxconf | RCR_ADF;
write_nic_dword(dev, RCR, rxconf);
#ifdef DEBUG_RX
- DMESG("rxconf: %x %x",rxconf ,read_nic_dword(dev,RCR));
+ DMESG("rxconf: %x %x", rxconf, read_nic_dword(dev, RCR));
#endif
}
//wait to be removed
struct sk_buff *skb;
struct rtl8192_rx_info *info;
- cmd = read_nic_byte(dev,CMDR);
+ cmd = read_nic_byte(dev, CMDR);
write_nic_byte(dev, CMDR, cmd & \
~(CR_TE|CR_RE));
force_pci_posting(dev);
}
}
-static u16 rtl_rate[] = {10,20,55,110,60,90,120,180,240,360,480,540};
+static u16 rtl_rate[] = {10, 20, 55, 110, 60, 90, 120, 180, 240, 360, 480, 540};
inline u16 rtl8192_rate2rate(short rate)
{
if (rate > 11) return 0;
skb = dev_alloc_skb(RX_URB_SIZE);
if (unlikely(!skb)) {
usb_free_urb(urb);
- printk("%s():can,t alloc skb\n",__FUNCTION__);
+ printk("%s():can,t alloc skb\n", __FUNCTION__);
/* TODO check rx queue length and refill *somewhere* */
return;
}
skb_queue_tail(&priv->rx_queue, skb);
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err && err != EPERM)
- printk("can not submit rxurb, err is %x,URB status is %x\n",err,urb->status);
+ printk("can not submit rxurb, err is %x,URB status is %x\n", err, urb->status);
}
u32
/* shall not be referred by command packet */
assert(queue_index != TXCMD_QUEUE);
- spin_lock_irqsave(&priv->tx_lock,flags);
+ spin_lock_irqsave(&priv->tx_lock, flags);
- memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
+ memcpy((unsigned char *)(skb->cb), &dev, sizeof(dev));
// tcb_desc->RATRIndex = 7;
// tcb_desc->bTxDisableRateFallBack = 1;
// tcb_desc->bTxUseDriverAssingedRate = 1;
//priv->ieee80211->stats.tx_bytes+=(skb->len - priv->ieee80211->tx_headroom);
//priv->ieee80211->stats.tx_packets++;
- spin_unlock_irqrestore(&priv->tx_lock,flags);
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
// return ret;
return;
* If the ring is full packet are dropped (for data frame the queue
* is stopped before this can happen).
*/
-int rtl8192_hard_start_xmit(struct sk_buff *skb,struct net_device *dev)
+int rtl8192_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
int ret;
u8 queue_index = tcb_desc->queue_index;
- spin_lock_irqsave(&priv->tx_lock,flags);
+ spin_lock_irqsave(&priv->tx_lock, flags);
- memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
+ memcpy((unsigned char *)(skb->cb), &dev, sizeof(dev));
if (queue_index == TXCMD_QUEUE) {
skb_push(skb, USB_HWDESC_HEADER_LEN);
rtl819xU_tx_cmd(dev, skb);
ret = 1;
- spin_unlock_irqrestore(&priv->tx_lock,flags);
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
return ret;
} else {
skb_push(skb, priv->ieee80211->tx_headroom);
ret = rtl8192_tx(dev, skb);
}
- spin_unlock_irqrestore(&priv->tx_lock,flags);
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
return ret;
}
// printk("========>skb->data ======> \n");
// RT_DEBUG_DATA(COMP_SEND, skb->data, skb->len);
memcpy(agg_skb->cb, skb->cb, sizeof(skb->cb));
- memcpy(skb_put(agg_skb,skb->len),skb->data,skb->len);
+ memcpy(skb_put(agg_skb, skb->len), skb->data, skb->len);
for (i = 1; i < pSendList->nr_drv_agg_frames; i++) {
/* push the next sub frame to be 256 byte aline */
- skb_put(agg_skb,DrvAggr_PaddingAdd(dev,skb));
+ skb_put(agg_skb, DrvAggr_PaddingAdd(dev, skb));
/* Subframe drv Tx descriptor and firmware info setting */
skb = pSendList->tx_agg_frames[i];
tx_agg_desc = (tx_desc_819x_usb_aggr_subframe *)agg_skb->tail;
tx_fwinfo = (tx_fwinfo_819x_usb *)(agg_skb->tail + sizeof(tx_desc_819x_usb_aggr_subframe));
- memset(tx_fwinfo,0,sizeof(tx_fwinfo_819x_usb));
+ memset(tx_fwinfo, 0, sizeof(tx_fwinfo_819x_usb));
/* DWORD 0 */
tx_fwinfo->TxHT = (tcb_desc->data_rate&0x80)?1:0;
tx_fwinfo->TxRate = MRateToHwRate8190Pci(tcb_desc->data_rate);
//tx_agg_desc->TxBufferSize= (u32)(skb->len - USB_HWDESC_HEADER_LEN);
/* to fill next packet */
- skb_put(agg_skb,TX_PACKET_DRVAGGR_SUBFRAME_SHIFT_BYTES);
- memcpy(skb_put(agg_skb,skb->len),skb->data,skb->len);
+ skb_put(agg_skb, TX_PACKET_DRVAGGR_SUBFRAME_SHIFT_BYTES);
+ memcpy(skb_put(agg_skb, skb->len), skb->data, skb->len);
}
for (i = 0; i < pSendList->nr_drv_agg_frames; i++) {
// bool bToSend0Byte;
// u16 BufLen = skb->len;
- memcpy(&dev,(struct net_device *)(skb->cb),sizeof(struct net_device *));
+ memcpy(&dev, (struct net_device *)(skb->cb), sizeof(struct net_device *));
priv = ieee80211_priv(dev);
if (tcb_desc->queue_index != TXCMD_QUEUE) {
rtl8192_config_rate(dev, &rate_config);
priv->basic_rate = rate_config &= 0x15f;
- write_nic_dword(dev,BSSIDR,((u32 *)net->bssid)[0]);
- write_nic_word(dev,BSSIDR+4,((u16 *)net->bssid)[2]);
+ write_nic_dword(dev, BSSIDR, ((u32 *)net->bssid)[0]);
+ write_nic_word(dev, BSSIDR+4, ((u16 *)net->bssid)[2]);
//for(i=0;i<ETH_ALEN;i++)
// write_nic_byte(dev,BSSID+i,net->bssid[i]);
//temporary hw beacon is not used any more.
//open it when necessary
-void rtl819xusb_beacon_tx(struct net_device *dev,u16 tx_rate)
+void rtl819xusb_beacon_tx(struct net_device *dev, u16 tx_rate)
{
}
usb_free_urb(tx_cmd_urb);
}
-unsigned int txqueue2outpipe(struct r8192_priv *priv,unsigned int tx_queue) {
+unsigned int txqueue2outpipe(struct r8192_priv *priv, unsigned int tx_queue) {
if (tx_queue >= 9)
{
- RT_TRACE(COMP_ERR,"%s():Unknown queue ID!!!\n",__FUNCTION__);
+ RT_TRACE(COMP_ERR, "%s():Unknown queue ID!!!\n", __FUNCTION__);
return 0x04;
}
return priv->txqueue_to_outpipemap[tx_queue];
//printk("\n %s::queue_index = %d\n",__FUNCTION__, queue_index);
atomic_inc(&priv->tx_pending[queue_index]);
- tx_urb = usb_alloc_urb(0,GFP_ATOMIC);
+ tx_urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!tx_urb){
dev_kfree_skb(skb);
return -ENOMEM;
//----------------------------------------------------------------------------
// Get index to out pipe from specified QueueID.
#ifndef USE_ONE_PIPE
- idx_pipe = txqueue2outpipe(priv,queue_index);
+ idx_pipe = txqueue2outpipe(priv, queue_index);
#else
idx_pipe = 0x04;
#endif
#ifdef JOHN_DUMP_TXDESC
int i;
- printk("<Tx descriptor>--rate %x---",rate);
+ printk("<Tx descriptor>--rate %x---", rate);
for (i = 0; i < 8; i++)
printk("%8x ", tx[i]);
printk("\n");
#endif
- usb_fill_bulk_urb(tx_urb,priv->udev, usb_sndbulkpipe(priv->udev,idx_pipe), \
+ usb_fill_bulk_urb(tx_urb, priv->udev, usb_sndbulkpipe(priv->udev, idx_pipe), \
skb->data, skb->len, rtl8192_tx_isr, skb);
status = usb_submit_urb(tx_urb, GFP_ATOMIC);
return -1;
}
- tx_urb = usb_alloc_urb(0,GFP_ATOMIC);
+ tx_urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!tx_urb){
dev_kfree_skb_any(skb);
return -ENOMEM;
}
/* Fill Tx firmware info */
- memset(tx_fwinfo,0,sizeof(tx_fwinfo_819x_usb));
+ memset(tx_fwinfo, 0, sizeof(tx_fwinfo_819x_usb));
/* DWORD 0 */
tx_fwinfo->TxHT = (tcb_desc->data_rate&0x80)?1:0;
tx_fwinfo->TxRate = MRateToHwRate8190Pci(tcb_desc->data_rate);
}
/* Get index to out pipe from specified QueueID */
#ifndef USE_ONE_PIPE
- idx_pipe = txqueue2outpipe(priv,tcb_desc->queue_index);
+ idx_pipe = txqueue2outpipe(priv, tcb_desc->queue_index);
#else
idx_pipe = 0x5;
#endif
//RT_DEBUG_DATA(COMP_SEND,tx_desc,sizeof(tx_desc_819x_usb));
/* To submit bulk urb */
- usb_fill_bulk_urb(tx_urb,udev,
- usb_sndbulkpipe(udev,idx_pipe), skb->data,
+ usb_fill_bulk_urb(tx_urb, udev,
+ usb_sndbulkpipe(udev, idx_pipe), skb->data,
skb->len, rtl8192_tx_isr, skb);
status = usb_submit_urb(tx_urb, GFP_ATOMIC);
}
if (bSend0Byte)
{
- tx_urb_zero = usb_alloc_urb(0,GFP_ATOMIC);
+ tx_urb_zero = usb_alloc_urb(0, GFP_ATOMIC);
if (!tx_urb_zero){
RT_TRACE(COMP_ERR, "can't alloc urb for zero byte\n");
return -ENOMEM;
}
- usb_fill_bulk_urb(tx_urb_zero,udev,
- usb_sndbulkpipe(udev,idx_pipe), &zero,
+ usb_fill_bulk_urb(tx_urb_zero, udev,
+ usb_sndbulkpipe(udev, idx_pipe), &zero,
0, tx_zero_isr, dev);
status = usb_submit_urb(tx_urb_zero, GFP_ATOMIC);
if (status){
#ifndef JACKSON_NEW_RX
for (i = 0; i < (MAX_RX_URB+1); i++){
- priv->rx_urb[i] = usb_alloc_urb(0,GFP_KERNEL);
+ priv->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
priv->rx_urb[i]->transfer_buffer = kmalloc(RX_URB_SIZE, GFP_KERNEL);
}
static struct ieee80211_qos_parameters def_qos_parameters = {
- {3,3,3,3},/* cw_min */
- {7,7,7,7},/* cw_max */
- {2,2,2,2},/* aifs */
- {0,0,0,0},/* flags */
- {0,0,0,0} /* tx_op_limit */
+ {3, 3, 3, 3},/* cw_min */
+ {7, 7, 7, 7},/* cw_max */
+ {2, 2, 2, 2},/* aifs */
+ {0, 0, 0, 0},/* flags */
+ {0, 0, 0, 0} /* tx_op_limit */
};
/*
* background support to run QoS activate functionality
*/
-int WDCAPARA_ADD[] = {EDCAPARA_BE,EDCAPARA_BK,EDCAPARA_VI,EDCAPARA_VO};
+int WDCAPARA_ADD[] = {EDCAPARA_BE, EDCAPARA_BK, EDCAPARA_VI, EDCAPARA_VO};
void rtl8192_qos_activate(struct work_struct *work)
{
struct r8192_priv *priv = container_of(work, struct r8192_priv, qos_activate);
mutex_lock(&priv->mutex);
if (priv->ieee80211->state != IEEE80211_LINKED)
goto success;
- RT_TRACE(COMP_QOS,"qos active process with associate response received\n");
+ RT_TRACE(COMP_QOS, "qos active process with associate response received\n");
/* It better set slot time at first */
/* For we just support b/g mode at present, let the slot time at 9/20 selection */
/* update the ac parameter to related registers */
{
struct r8192_priv *priv = ieee80211_priv(dev);
- rtl8192_qos_handle_probe_response(priv,1,network);
+ rtl8192_qos_handle_probe_response(priv, 1, network);
queue_delayed_work(priv->priv_wq, &priv->update_beacon_wq, 0);
return 0;
spin_unlock_irqrestore(&priv->ieee80211->lock, flags);
- RT_TRACE(COMP_QOS, "%s: network->flags = %d,%d\n",__FUNCTION__,network->flags ,priv->ieee80211->current_network.qos_data.active);
+ RT_TRACE(COMP_QOS, "%s: network->flags = %d,%d\n", __FUNCTION__, network->flags, priv->ieee80211->current_network.qos_data.active);
if (set_qos_param == 1)
queue_work(priv->priv_wq, &priv->qos_activate);
write_nic_byte(dev, UFWP, 1);
}
-static u8 ccmp_ie[4] = {0x00,0x50,0xf2,0x04};
+static u8 ccmp_ie[4] = {0x00, 0x50, 0xf2, 0x04};
static u8 ccmp_rsn_ie[4] = {0x00, 0x0f, 0xac, 0x04};
bool GetNmodeSupportBySecCfg8192(struct net_device *dev)
{
crypt = ieee->crypt[ieee->tx_keyidx];
//we use connecting AP's capability instead of only security config on our driver to distinguish whether it should use N mode or G mode
- encrypt = (network->capability & WLAN_CAPABILITY_PRIVACY) || (ieee->host_encrypt && crypt && crypt->ops && (0 == strcmp(crypt->ops->name,"WEP")));
+ encrypt = (network->capability & WLAN_CAPABILITY_PRIVACY) || (ieee->host_encrypt && crypt && crypt->ops && (0 == strcmp(crypt->ops->name, "WEP")));
/* simply judge */
if (encrypt && (wpa_ie_len == 0)) {
} else if ((wpa_ie_len != 0)) {
/* parse pairwise key type */
//if((pairwisekey = WEP40)||(pairwisekey = WEP104)||(pairwisekey = TKIP))
- if (((ieee->wpa_ie[0] == 0xdd) && (!memcmp(&(ieee->wpa_ie[14]),ccmp_ie,4))) || ((ieee->wpa_ie[0] == 0x30) && (!memcmp(&ieee->wpa_ie[10],ccmp_rsn_ie, 4))))
+ if (((ieee->wpa_ie[0] == 0xdd) && (!memcmp(&(ieee->wpa_ie[14]), ccmp_ie, 4))) || ((ieee->wpa_ie[0] == 0x30) && (!memcmp(&ieee->wpa_ie[10], ccmp_rsn_ie, 4))))
return true;
else
return false;
wireless_mode = WIRELESS_MODE_B;
}
else{
- RT_TRACE(COMP_ERR, "%s(), No valid wireless mode supported, SupportedWirelessMode(%x)!!!\n", __FUNCTION__,bSupportMode);
+ RT_TRACE(COMP_ERR, "%s(), No valid wireless mode supported, SupportedWirelessMode(%x)!!!\n", __FUNCTION__, bSupportMode);
wireless_mode = WIRELESS_MODE_B;
}
}
spin_lock_init(&priv->tx_lock);
spin_lock_init(&priv->irq_lock);//added by thomas
//spin_lock_init(&priv->rf_lock);
- sema_init(&priv->wx_sem,1);
- sema_init(&priv->rf_sem,1);
+ sema_init(&priv->wx_sem, 1);
+ sema_init(&priv->rf_sem, 1);
mutex_init(&priv->mutex);
}
u16 curCR = 0;
struct r8192_priv *priv = ieee80211_priv(dev);
RT_TRACE(COMP_EPROM, "===========>%s()\n", __FUNCTION__);
- curCR = read_nic_word_E(dev,EPROM_CMD);
+ curCR = read_nic_word_E(dev, EPROM_CMD);
RT_TRACE(COMP_EPROM, "read from Reg EPROM_CMD(%x):%x\n", EPROM_CMD, curCR);
//whether need I consider BIT5?
priv->epromtype = (curCR & Cmd9346CR_9356SEL) ? EPROM_93c56 : EPROM_93c46;
printk("rtl8180_init:Error channel plan! Set to default.\n");
priv->ChannelPlan = 0;
}
- RT_TRACE(COMP_INIT, "Channel plan is %d\n",priv->ChannelPlan);
+ RT_TRACE(COMP_INIT, "Channel plan is %d\n", priv->ChannelPlan);
rtl819x_set_channel_map(priv->ChannelPlan, priv);
return 0;
struct r8192_priv *priv = ieee80211_priv(dev);
- memset(&(priv->stats),0,sizeof(struct Stats));
- memset(priv->txqueue_to_outpipemap,0,9);
+ memset(&(priv->stats), 0, sizeof(struct Stats));
+ memset(priv->txqueue_to_outpipemap, 0, 9);
#ifdef PIPE12
{
int i = 0;
- u8 queuetopipe[] = {3,2,1,0,4,8,7,6,5};
- memcpy(priv->txqueue_to_outpipemap,queuetopipe,9);
+ u8 queuetopipe[] = {3, 2, 1, 0, 4, 8, 7, 6, 5};
+ memcpy(priv->txqueue_to_outpipemap, queuetopipe, 9);
/* for(i=0;i<9;i++)
printk("%d ",priv->txqueue_to_outpipemap[i]);
printk("\n");*/
}
#else
{
- u8 queuetopipe[] = {3,2,1,0,4,4,0,4,4};
- memcpy(priv->txqueue_to_outpipemap,queuetopipe,9);
+ u8 queuetopipe[] = {3, 2, 1, 0, 4, 4, 0, 4, 4};
+ memcpy(priv->txqueue_to_outpipemap, queuetopipe, 9);
/* for(i=0;i<9;i++)
printk("%d ",priv->txqueue_to_outpipemap[i]);
printk("\n");*/
init_status = init_firmware(dev);
if (!init_status)
{
- RT_TRACE(COMP_ERR,"ERR!!! %s(): Firmware download is failed\n", __FUNCTION__);
+ RT_TRACE(COMP_ERR, "ERR!!! %s(): Firmware download is failed\n", __FUNCTION__);
return init_status;
}
RT_TRACE(COMP_INIT, "%s():after firmware download\n", __FUNCTION__);
if (priv->bDcut == TRUE)
{
u32 i, TempCCk;
- u32 tmpRegA = rtl8192_QueryBBReg(dev,rOFDM0_XATxIQImbalance,bMaskDWord);
+ u32 tmpRegA = rtl8192_QueryBBReg(dev, rOFDM0_XATxIQImbalance, bMaskDWord);
// u32 tmpRegC= rtl8192_QueryBBReg(dev,rOFDM0_XCTxIQImbalance,bMaskDWord);
for (i = 0; i < TxBBGainTableLength; i++)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u16 RegTxCounter = read_nic_word(dev, 0x128);
bool bStuck = FALSE;
- RT_TRACE(COMP_RESET,"%s():RegTxCounter is %d,TxCounter is %d\n",__FUNCTION__,RegTxCounter,priv->TxCounter);
+ RT_TRACE(COMP_RESET, "%s():RegTxCounter is %d,TxCounter is %d\n", __FUNCTION__, RegTxCounter, priv->TxCounter);
if (priv->TxCounter == RegTxCounter)
bStuck = TRUE;
struct r8192_priv *priv = ieee80211_priv(dev);
bool bStuck = FALSE;
static u8 rx_chk_cnt;
- RT_TRACE(COMP_RESET,"%s(): RegRxCounter is %d,RxCounter is %d\n",__FUNCTION__,RegRxCounter,priv->RxCounter);
+ RT_TRACE(COMP_RESET, "%s(): RegRxCounter is %d,RxCounter is %d\n", __FUNCTION__, RegRxCounter, priv->RxCounter);
// If rssi is small, we should check rx for long time because of bad rx.
// or maybe it will continuous silent reset every 2 seconds.
rx_chk_cnt++;
if (TxResetType == RESET_TYPE_NORMAL || RxResetType == RESET_TYPE_NORMAL)
return RESET_TYPE_NORMAL;
else if (TxResetType == RESET_TYPE_SILENT || RxResetType == RESET_TYPE_SILENT){
- RT_TRACE(COMP_RESET,"%s():silent reset\n",__FUNCTION__);
+ RT_TRACE(COMP_RESET, "%s():silent reset\n", __FUNCTION__);
return RESET_TYPE_SILENT;
}
else
{
MacAddr = CAM_CONST_ADDR[EntryId];
setKey(dev,
- EntryId ,
+ EntryId,
EntryId,
priv->ieee80211->pairwise_key_type,
MacAddr,
if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
setKey(dev,
- 0 ,
+ 0,
0,
priv->ieee80211->group_key_type,
CAM_CONST_ADDR[0],
{
RESET_START:
- RT_TRACE(COMP_RESET,"=========>Reset progress!! \n");
+ RT_TRACE(COMP_RESET, "=========>Reset progress!! \n");
// Set the variable for reset.
priv->ResetProgress = RESET_TYPE_SILENT;
down(&priv->wx_sem);
if (priv->up == 0)
{
- RT_TRACE(COMP_ERR,"%s():the driver is not up! return\n",__FUNCTION__);
+ RT_TRACE(COMP_ERR, "%s():the driver is not up! return\n", __FUNCTION__);
up(&priv->wx_sem);
return;
}
priv->up = 0;
- RT_TRACE(COMP_RESET,"%s():======>start to down the driver\n",__FUNCTION__);
+ RT_TRACE(COMP_RESET, "%s():======>start to down the driver\n", __FUNCTION__);
// if(!netif_queue_stopped(dev))
// netif_stop_queue(dev);
printk("ieee->state is NOT LINKED\n");
ieee80211_softmac_stop_protocol(priv->ieee80211); }
up(&priv->wx_sem);
- RT_TRACE(COMP_RESET,"%s():<==========down process is finished\n",__FUNCTION__);
+ RT_TRACE(COMP_RESET, "%s():<==========down process is finished\n", __FUNCTION__);
//rtl8192_irq_disable(dev);
- RT_TRACE(COMP_RESET,"%s():===========>start up the driver\n",__FUNCTION__);
+ RT_TRACE(COMP_RESET, "%s():===========>start up the driver\n", __FUNCTION__);
reset_status = _rtl8192_up(dev);
- RT_TRACE(COMP_RESET,"%s():<===========up process is finished\n",__FUNCTION__);
+ RT_TRACE(COMP_RESET, "%s():<===========up process is finished\n", __FUNCTION__);
if (reset_status == -EAGAIN)
{
if (reset_times < 3)
}
else
{
- RT_TRACE(COMP_ERR," ERR!!! %s(): Reset Failed!!\n", __FUNCTION__);
+ RT_TRACE(COMP_ERR, " ERR!!! %s(): Reset Failed!!\n", __FUNCTION__);
}
}
ieee->is_silent_reset = 1;
}
}
write_nic_dword(dev, RWCAM, target_command);
- RT_TRACE(COMP_SEC,"CAM_read_entry(): WRITE A0: %x \n",target_command);
+ RT_TRACE(COMP_SEC, "CAM_read_entry(): WRITE A0: %x \n", target_command);
// printk("CAM_read_entry(): WRITE A0: %lx \n",target_command);
target_content = read_nic_dword(dev, RCAMO);
- RT_TRACE(COMP_SEC, "CAM_read_entry(): WRITE A8: %x \n",target_content);
+ RT_TRACE(COMP_SEC, "CAM_read_entry(): WRITE A8: %x \n", target_content);
// printk("CAM_read_entry(): WRITE A8: %lx \n",target_content);
}
printk("\n");
extern void rtl819x_watchdog_wqcallback(struct work_struct *work)
{
- struct delayed_work *dwork = container_of(work,struct delayed_work,work);
- struct r8192_priv *priv = container_of(dwork,struct r8192_priv,watch_dog_wq);
+ struct delayed_work *dwork = container_of(work, struct delayed_work, work);
+ struct r8192_priv *priv = container_of(dwork, struct r8192_priv, watch_dog_wq);
struct net_device *dev = priv->ieee80211->dev;
struct ieee80211_device *ieee = priv->ieee80211;
RESET_TYPE ResetType = RESET_TYPE_NORESET;
{
#ifdef TODO
if (rfState == eRfOff)
- RT_TRACE(COMP_ERR,"========>%s()\n",__FUNCTION__);
+ RT_TRACE(COMP_ERR, "========>%s()\n", __FUNCTION__);
#endif
- printk("===>%s(): AP is power off,connect another one\n",__FUNCTION__);
+ printk("===>%s(): AP is power off,connect another one\n", __FUNCTION__);
// Dot11d_Reset(dev);
priv->ieee80211->state = IEEE80211_ASSOCIATING;
notify_wx_assoc_event(priv->ieee80211);
- RemovePeerTS(priv->ieee80211,priv->ieee80211->current_network.bssid);
+ RemovePeerTS(priv->ieee80211, priv->ieee80211->current_network.bssid);
priv->ieee80211->link_change(dev);
queue_work(priv->ieee80211->wq, &priv->ieee80211->associate_procedure_wq);
(priv->bForcedSilentReset ||
(!priv->bDisableNormalResetCheck && ResetType == RESET_TYPE_SILENT)))) // This is control by OID set in Pomelo
{
- RT_TRACE(COMP_RESET,"%s():priv->force_reset is %d,priv->ResetProgress is %d, priv->bForcedSilentReset is %d,priv->bDisableNormalResetCheck is %d,ResetType is %d\n",__FUNCTION__,priv->force_reset,priv->ResetProgress,priv->bForcedSilentReset,priv->bDisableNormalResetCheck,ResetType);
+ RT_TRACE(COMP_RESET, "%s():priv->force_reset is %d,priv->ResetProgress is %d, priv->bForcedSilentReset is %d,priv->bDisableNormalResetCheck is %d,ResetType is %d\n", __FUNCTION__, priv->force_reset, priv->ResetProgress, priv->bForcedSilentReset, priv->bDisableNormalResetCheck, ResetType);
rtl819x_ifsilentreset(dev);
}
priv->force_reset = false;
{
struct r8192_priv *priv = ieee80211_priv((struct net_device *) data);
//printk("===============>watch_dog timer\n");
- queue_delayed_work(priv->priv_wq,&priv->watch_dog_wq, 0);
+ queue_delayed_work(priv->priv_wq, &priv->watch_dog_wq, 0);
mod_timer(&priv->watch_dog_timer, jiffies + MSECS(IEEE80211_WATCH_DOG_TIME));
}
int _rtl8192_up(struct net_device *dev)
init_status = rtl8192_adapter_start(dev);
if (!init_status)
{
- RT_TRACE(COMP_ERR,"ERR!!! %s(): initialization failed!\n", __FUNCTION__);
+ RT_TRACE(COMP_ERR, "ERR!!! %s(): initialization failed!\n", __FUNCTION__);
priv->up = priv->ieee80211->ieee_up = 0;
return -EAGAIN;
}
ieee80211_softmac_stop_protocol(priv->ieee80211);
- memset(&priv->ieee80211->current_network, 0 , offsetof(struct ieee80211_network, list));
+ memset(&priv->ieee80211->current_network, 0, offsetof(struct ieee80211_network, list));
RT_TRACE(COMP_DOWN, "<==========%s()\n", __FUNCTION__);
return 0;
int ret = -1;
struct ieee80211_device *ieee = priv->ieee80211;
u32 key[4];
- u8 broadcast_addr[6] = {0xff,0xff,0xff,0xff,0xff,0xff};
+ u8 broadcast_addr[6] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
struct iw_point *p = &wrq->u.data;
struct ieee_param *ipw = NULL;//(struct ieee_param *)wrq->u.data.pointer;
default:
ret_rate = 0xff;
- RT_TRACE(COMP_RECV, "HwRateToMRate90(): Non supported Rate [%x], bIsHT = %d!!!\n",rate, bIsHT);
+ RT_TRACE(COMP_RECV, "HwRateToMRate90(): Non supported Rate [%x], bIsHT = %d!!!\n", rate, bIsHT);
break;
}
}
be a local static. Otherwise, it may increase when we return from S3/S4. The
value will be kept in memory or disk. Declare the value in the adaptor
and it will be reinitialized when returned from S3/S4. */
-void rtl8192_process_phyinfo(struct r8192_priv *priv,u8 *buffer, struct ieee80211_rx_stats *pprevious_stats, struct ieee80211_rx_stats *pcurrent_stats)
+void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer, struct ieee80211_rx_stats *pprevious_stats, struct ieee80211_rx_stats *pcurrent_stats)
{
bool bcheck = false;
u8 rfpath;
struct ieee80211_hdr_3addr *hdr;
u16 sc;
- unsigned int frag,seq;
+ unsigned int frag, seq;
hdr = (struct ieee80211_hdr_3addr *)buffer;
sc = le16_to_cpu(hdr->seq_ctl);
frag = WLAN_GET_SEQ_FRAG(sc);
((priv->stats.rx_rssi_percentage[rfpath]*(Rx_Smooth_Factor-1)) +
(pprevious_stats->RxMIMOSignalStrength[rfpath])) /(Rx_Smooth_Factor);
}
- RT_TRACE(COMP_DBG,"priv->stats.rx_rssi_percentage[rfPath] = %d \n" ,priv->stats.rx_rssi_percentage[rfpath]);
+ RT_TRACE(COMP_DBG, "priv->stats.rx_rssi_percentage[rfPath] = %d \n", priv->stats.rx_rssi_percentage[rfpath]);
}
}
bool bPacketBeacon = FALSE, bToSelfBA = FALSE;
static struct ieee80211_rx_stats previous_stats;
struct ieee80211_hdr_3addr *hdr;//by amy
- u16 fc,type;
+ u16 fc, type;
// Get Signal Quality for only RX data queue (but not command queue)
}
if (WLAN_FC_GET_FRAMETYPE(fc) == IEEE80211_STYPE_BLOCKACK)
{
- if ((eqMacAddr(praddr,dev->dev_addr)))
+ if ((eqMacAddr(praddr, dev->dev_addr)))
bToSelfBA = true;
//DbgPrint("BlockAck, MatchBSSID = %d, ToSelf = %d \n", bPacketMatchBSSID, bPacketToSelf);
}
// Because phy information is contained in the last packet of AMPDU only, so driver
// should process phy information of previous packet
rtl8192_process_phyinfo(priv, tmp_buf, &previous_stats, pstats);
- rtl8192_query_rxphystatus(priv, pstats, pdrvinfo, &previous_stats, bpacket_match_bssid,bpacket_toself,bPacketBeacon,bToSelfBA);
+ rtl8192_query_rxphystatus(priv, pstats, pdrvinfo, &previous_stats, bpacket_match_bssid, bpacket_toself, bPacketBeacon, bToSelfBA);
rtl8192_record_rxdesc_forlateruse(pstats, &previous_stats);
}
}
- skb_pull(skb,sizeof(rx_desc_819x_usb));
+ skb_pull(skb, sizeof(rx_desc_819x_usb));
//
// Get Total offset of MPDU Frame Body
//
if ((stats->RxBufShift + stats->RxDrvInfoSize) > 0) {
stats->bShift = 1;
- skb_pull(skb,stats->RxBufShift + stats->RxDrvInfoSize);
+ skb_pull(skb, stats->RxBufShift + stats->RxDrvInfoSize);
}
#ifdef USB_RX_AGGREGATION_SUPPORT
TempDWord = *(u32 *)(agg_skb->data - 4);
PacketLength = (u16)(TempDWord & 0x3FFF); /*sCrcLng*/
skb = dev_alloc_skb(PacketLength);
- memcpy(skb_put(skb,PacketLength),agg_skb->data,PacketLength);
+ memcpy(skb_put(skb, PacketLength), agg_skb->data, PacketLength);
PacketShiftBytes = GetRxPacketShiftBytes819xUsb(&stats, false);
}
#endif
unicast_packet = true;
}
- if (!ieee80211_rx(priv->ieee80211,skb, &stats)) {
+ if (!ieee80211_rx(priv->ieee80211, skb, &stats)) {
dev_kfree_skb_any(skb);
} else {
priv->stats.rxoktotal++;
}
/* Process the MPDU received */
skb = dev_alloc_skb(PacketLength);
- memcpy(skb_put(skb,PacketLength),agg_skb->data, PacketLength);
+ memcpy(skb_put(skb, PacketLength), agg_skb->data, PacketLength);
skb_trim(skb, skb->len - 4/*sCrcLng*/);
rx_pkt_len = skb->len;
/* unicast packet */
unicast_packet = true;
}
- if (!ieee80211_rx(priv->ieee80211,skb, &stats)) {
+ if (!ieee80211_rx(priv->ieee80211, skb, &stats)) {
dev_kfree_skb_any(skb);
} else {
priv->stats.rxoktotal++;
if ((skb->len >= (20 + sizeof(rx_desc_819x_usb))) && (skb->len < RX_URB_SIZE))
{
- query_rx_cmdpkt_desc_status(skb,&stats);
+ query_rx_cmdpkt_desc_status(skb, &stats);
// this is to be done by amy 080508 prfd->queue_id = 1;
// Process the command packet received.
//
- rtl819xusb_process_received_packet(dev,&stats);
+ rtl819xusb_process_received_packet(dev, &stats);
dev_kfree_skb_any(skb);
}
if (ret)
goto fail2;
- RT_TRACE(COMP_INIT, "dev name=======> %s\n",dev->name);
+ RT_TRACE(COMP_INIT, "dev name=======> %s\n", dev->name);
rtl8192_proc_init_one(dev);
short enough_desc;
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- spin_lock_irqsave(&priv->tx_lock,flags);
- enough_desc = check_nic_enough_desc(dev,pri);
- spin_unlock_irqrestore(&priv->tx_lock,flags);
+ spin_lock_irqsave(&priv->tx_lock, flags);
+ enough_desc = check_nic_enough_desc(dev, pri);
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
if (enough_desc)
ieee80211_wake_queue(priv->ieee80211);
ieee->hwsec_active = 0;
SECR_value &= ~SCR_RxDecEnable;
}
- RT_TRACE(COMP_SEC,"%s:, hwsec:%d, pairwise_key:%d, SECR_value:%x\n", __FUNCTION__, \
+ RT_TRACE(COMP_SEC, "%s:, hwsec:%d, pairwise_key:%d, SECR_value:%x\n", __FUNCTION__, \
ieee->hwsec_active, ieee->pairwise_key_type, SECR_value);
{
write_nic_byte(dev, SECR, SECR_value);//SECR_value | SCR_UseDK );
if (EntryNo >= TOTAL_CAM_ENTRY)
RT_TRACE(COMP_ERR, "cam entry exceeds in setKey()\n");
- RT_TRACE(COMP_SEC, "====>to setKey(), dev:%p, EntryNo:%d, KeyIndex:%d, KeyType:%d, MacAddr%pM\n", dev,EntryNo, KeyIndex, KeyType, MacAddr);
+ RT_TRACE(COMP_SEC, "====>to setKey(), dev:%p, EntryNo:%d, KeyIndex:%d, KeyType:%d, MacAddr%pM\n", dev, EntryNo, KeyIndex, KeyType, MacAddr);
if (DefaultKey)
usConfig |= BIT15 | (KeyType<<2);
projects / linux-beck.git / commitdiff