]> git.karo-electronics.de Git - mv-sheeva.git/commitdiff
serial/efm32: add new driver
authorUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Wed, 25 Jan 2012 08:05:04 +0000 (09:05 +0100)
committerGreg Kroah-Hartman <gregkh@suse.de>
Thu, 26 Jan 2012 19:29:47 +0000 (11:29 -0800)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Documentation/devicetree/bindings/tty/serial/efm32-uart.txt [new file with mode: 0644]
drivers/tty/serial/Kconfig
drivers/tty/serial/Makefile
drivers/tty/serial/efm32-uart.c [new file with mode: 0644]
include/linux/platform_data/efm32-uart.h [new file with mode: 0644]
include/linux/serial_core.h

diff --git a/Documentation/devicetree/bindings/tty/serial/efm32-uart.txt b/Documentation/devicetree/bindings/tty/serial/efm32-uart.txt
new file mode 100644 (file)
index 0000000..6588b69
--- /dev/null
@@ -0,0 +1,14 @@
+* Energymicro efm32 UART
+
+Required properties:
+- compatible : Should be "efm32,uart"
+- reg : Address and length of the register set
+- interrupts : Should contain uart interrupt
+
+Example:
+
+uart@0x4000c400 {
+       compatible = "efm32,uart";
+       reg = <0x4000c400 0x400>;
+       interrupts = <15>;
+};
index aca2386c5ef10261e74bfb66b2461546c8206150..6e24a8f5fd2a2f517678311afff626ea157a075b 100644 (file)
@@ -1628,4 +1628,17 @@ config SERIAL_AR933X_NR_UARTS
          Set this to the number of serial ports you want the driver
          to support.
 
+config SERIAL_EFM32_UART
+       tristate "EFM32 UART/USART port."
+       depends on ARCH_EFM32
+       select SERIAL_CORE
+       help
+         This driver support the USART and UART ports on
+         Energy Micro's efm32 SoCs.
+
+config SERIAL_EFM32_UART_CONSOLE
+       bool "EFM32 UART/USART console support"
+       depends on SERIAL_EFM32_UART=y
+       select SERIAL_CORE_CONSOLE
+
 endmenu
index f5b01f2ce525da8df92d1972529fefb70c98ae23..1997ad4a39a6f6e6ba4b5f4ddc109320b7db4d5b 100644 (file)
@@ -92,3 +92,4 @@ obj-$(CONFIG_SERIAL_LANTIQ)   += lantiq.o
 obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o
 obj-$(CONFIG_SERIAL_SIRFSOC) += sirfsoc_uart.o
 obj-$(CONFIG_SERIAL_AR933X)   += ar933x_uart.o
+obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o
diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c
new file mode 100644 (file)
index 0000000..615e464
--- /dev/null
@@ -0,0 +1,830 @@
+#if defined(CONFIG_SERIAL_EFM32_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/serial_core.h>
+#include <linux/tty_flip.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include <linux/platform_data/efm32-uart.h>
+
+#define DRIVER_NAME "efm32-uart"
+#define DEV_NAME "ttyefm"
+
+#define UARTn_CTRL             0x00
+#define UARTn_CTRL_SYNC                0x0001
+#define UARTn_CTRL_TXBIL               0x1000
+
+#define UARTn_FRAME            0x04
+#define UARTn_FRAME_DATABITS__MASK     0x000f
+#define UARTn_FRAME_DATABITS(n)                ((n) - 3)
+#define UARTn_FRAME_PARITY_NONE                0x0000
+#define UARTn_FRAME_PARITY_EVEN                0x0200
+#define UARTn_FRAME_PARITY_ODD         0x0300
+#define UARTn_FRAME_STOPBITS_HALF      0x0000
+#define UARTn_FRAME_STOPBITS_ONE       0x1000
+#define UARTn_FRAME_STOPBITS_TWO       0x3000
+
+#define UARTn_CMD              0x0c
+#define UARTn_CMD_RXEN                 0x0001
+#define UARTn_CMD_RXDIS                0x0002
+#define UARTn_CMD_TXEN                 0x0004
+#define UARTn_CMD_TXDIS                0x0008
+
+#define UARTn_STATUS           0x10
+#define UARTn_STATUS_TXENS             0x0002
+#define UARTn_STATUS_TXC               0x0020
+#define UARTn_STATUS_TXBL              0x0040
+#define UARTn_STATUS_RXDATAV           0x0080
+
+#define UARTn_CLKDIV           0x14
+
+#define UARTn_RXDATAX          0x18
+#define UARTn_RXDATAX_RXDATA__MASK     0x01ff
+#define UARTn_RXDATAX_PERR             0x4000
+#define UARTn_RXDATAX_FERR             0x8000
+/*
+ * This is a software only flag used for ignore_status_mask and
+ * read_status_mask! It's used for breaks that the hardware doesn't report
+ * explicitly.
+ */
+#define SW_UARTn_RXDATAX_BERR          0x2000
+
+#define UARTn_TXDATA           0x34
+
+#define UARTn_IF               0x40
+#define UARTn_IF_TXC                   0x0001
+#define UARTn_IF_TXBL                  0x0002
+#define UARTn_IF_RXDATAV               0x0004
+#define UARTn_IF_RXOF                  0x0010
+
+#define UARTn_IFS              0x44
+#define UARTn_IFC              0x48
+#define UARTn_IEN              0x4c
+
+#define UARTn_ROUTE            0x54
+#define UARTn_ROUTE_LOCATION__MASK     0x0700
+#define UARTn_ROUTE_LOCATION(n)                (((n) << 8) & UARTn_ROUTE_LOCATION__MASK)
+#define UARTn_ROUTE_RXPEN              0x0001
+#define UARTn_ROUTE_TXPEN              0x0002
+
+struct efm32_uart_port {
+       struct uart_port port;
+       unsigned int txirq;
+       struct clk *clk;
+};
+#define to_efm_port(_port) container_of(_port, struct efm32_uart_port, port)
+#define efm_debug(efm_port, format, arg...)                    \
+       dev_dbg(efm_port->port.dev, format, ##arg)
+
+static void efm32_uart_write32(struct efm32_uart_port *efm_port,
+               u32 value, unsigned offset)
+{
+       writel_relaxed(value, efm_port->port.membase + offset);
+}
+
+static u32 efm32_uart_read32(struct efm32_uart_port *efm_port,
+               unsigned offset)
+{
+       return readl_relaxed(efm_port->port.membase + offset);
+}
+
+static unsigned int efm32_uart_tx_empty(struct uart_port *port)
+{
+       struct efm32_uart_port *efm_port = to_efm_port(port);
+       u32 status = efm32_uart_read32(efm_port, UARTn_STATUS);
+
+       if (status & UARTn_STATUS_TXC)
+               return TIOCSER_TEMT;
+       else
+               return 0;
+}
+
+static void efm32_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+       /* sorry, neither handshaking lines nor loop functionallity */
+}
+
+static unsigned int efm32_uart_get_mctrl(struct uart_port *port)
+{
+       /* sorry, no handshaking lines available */
+       return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR;
+}
+
+static void efm32_uart_stop_tx(struct uart_port *port)
+{
+       struct efm32_uart_port *efm_port = to_efm_port(port);
+       u32 ien = efm32_uart_read32(efm_port,  UARTn_IEN);
+
+       efm32_uart_write32(efm_port, UARTn_CMD_TXDIS, UARTn_CMD);
+       ien &= ~(UARTn_IF_TXC | UARTn_IF_TXBL);
+       efm32_uart_write32(efm_port, ien, UARTn_IEN);
+}
+
+static void efm32_uart_tx_chars(struct efm32_uart_port *efm_port)
+{
+       struct uart_port *port = &efm_port->port;
+       struct circ_buf *xmit = &port->state->xmit;
+
+       while (efm32_uart_read32(efm_port, UARTn_STATUS) &
+                       UARTn_STATUS_TXBL) {
+               if (port->x_char) {
+                       port->icount.tx++;
+                       efm32_uart_write32(efm_port, port->x_char,
+                                       UARTn_TXDATA);
+                       port->x_char = 0;
+                       continue;
+               }
+               if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) {
+                       port->icount.tx++;
+                       efm32_uart_write32(efm_port, xmit->buf[xmit->tail],
+                                       UARTn_TXDATA);
+                       xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+               } else
+                       break;
+       }
+
+       if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+               uart_write_wakeup(port);
+
+       if (!port->x_char && uart_circ_empty(xmit) &&
+                       efm32_uart_read32(efm_port, UARTn_STATUS) &
+                               UARTn_STATUS_TXC)
+               efm32_uart_stop_tx(port);
+}
+
+static void efm32_uart_start_tx(struct uart_port *port)
+{
+       struct efm32_uart_port *efm_port = to_efm_port(port);
+       u32 ien;
+
+       efm32_uart_write32(efm_port,
+                       UARTn_IF_TXBL | UARTn_IF_TXC, UARTn_IFC);
+       ien = efm32_uart_read32(efm_port, UARTn_IEN);
+       efm32_uart_write32(efm_port,
+                       ien | UARTn_IF_TXBL | UARTn_IF_TXC, UARTn_IEN);
+       efm32_uart_write32(efm_port, UARTn_CMD_TXEN, UARTn_CMD);
+
+       efm32_uart_tx_chars(efm_port);
+}
+
+static void efm32_uart_stop_rx(struct uart_port *port)
+{
+       struct efm32_uart_port *efm_port = to_efm_port(port);
+
+       efm32_uart_write32(efm_port, UARTn_CMD_RXDIS, UARTn_CMD);
+}
+
+static void efm32_uart_enable_ms(struct uart_port *port)
+{
+       /* no handshake lines, no modem status interrupts */
+}
+
+static void efm32_uart_break_ctl(struct uart_port *port, int ctl)
+{
+       /* not possible without fiddling with gpios */
+}
+
+static void efm32_uart_rx_chars(struct efm32_uart_port *efm_port,
+               struct tty_struct *tty)
+{
+       struct uart_port *port = &efm_port->port;
+
+       while (efm32_uart_read32(efm_port, UARTn_STATUS) &
+                       UARTn_STATUS_RXDATAV) {
+               u32 rxdata = efm32_uart_read32(efm_port, UARTn_RXDATAX);
+               int flag = 0;
+
+               /*
+                * This is a reserved bit and I only saw it read as 0. But to be
+                * sure not to be confused too much by new devices adhere to the
+                * warning in the reference manual that reserverd bits might
+                * read as 1 in the future.
+                */
+               rxdata &= ~SW_UARTn_RXDATAX_BERR;
+
+               port->icount.rx++;
+
+               if ((rxdata & UARTn_RXDATAX_FERR) &&
+                               !(rxdata & UARTn_RXDATAX_RXDATA__MASK)) {
+                       rxdata |= SW_UARTn_RXDATAX_BERR;
+                       port->icount.brk++;
+                       if (uart_handle_break(port))
+                               continue;
+               } else if (rxdata & UARTn_RXDATAX_PERR)
+                       port->icount.parity++;
+               else if (rxdata & UARTn_RXDATAX_FERR)
+                       port->icount.frame++;
+
+               rxdata &= port->read_status_mask;
+
+               if (rxdata & SW_UARTn_RXDATAX_BERR)
+                       flag = TTY_BREAK;
+               else if (rxdata & UARTn_RXDATAX_PERR)
+                       flag = TTY_PARITY;
+               else if (rxdata & UARTn_RXDATAX_FERR)
+                       flag = TTY_FRAME;
+               else if (uart_handle_sysrq_char(port,
+                                       rxdata & UARTn_RXDATAX_RXDATA__MASK))
+                       continue;
+
+               if (tty && (rxdata & port->ignore_status_mask) == 0)
+                       tty_insert_flip_char(tty,
+                                       rxdata & UARTn_RXDATAX_RXDATA__MASK, flag);
+       }
+}
+
+static irqreturn_t efm32_uart_rxirq(int irq, void *data)
+{
+       struct efm32_uart_port *efm_port = data;
+       u32 irqflag = efm32_uart_read32(efm_port, UARTn_IF);
+       int handled = IRQ_NONE;
+       struct uart_port *port = &efm_port->port;
+       struct tty_struct *tty;
+
+       spin_lock(&port->lock);
+
+       tty = tty_kref_get(port->state->port.tty);
+
+       if (irqflag & UARTn_IF_RXDATAV) {
+               efm32_uart_write32(efm_port, UARTn_IF_RXDATAV, UARTn_IFC);
+               efm32_uart_rx_chars(efm_port, tty);
+
+               handled = IRQ_HANDLED;
+       }
+
+       if (irqflag & UARTn_IF_RXOF) {
+               efm32_uart_write32(efm_port, UARTn_IF_RXOF, UARTn_IFC);
+               port->icount.overrun++;
+               if (tty)
+                       tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+
+               handled = IRQ_HANDLED;
+       }
+
+       if (tty) {
+               tty_flip_buffer_push(tty);
+               tty_kref_put(tty);
+       }
+
+       spin_unlock(&port->lock);
+
+       return handled;
+}
+
+static irqreturn_t efm32_uart_txirq(int irq, void *data)
+{
+       struct efm32_uart_port *efm_port = data;
+       u32 irqflag = efm32_uart_read32(efm_port, UARTn_IF);
+
+       /* TXBL doesn't need to be cleared */
+       if (irqflag & UARTn_IF_TXC)
+               efm32_uart_write32(efm_port, UARTn_IF_TXC, UARTn_IFC);
+
+       if (irqflag & (UARTn_IF_TXC | UARTn_IF_TXBL)) {
+               efm32_uart_tx_chars(efm_port);
+               return IRQ_HANDLED;
+       } else
+               return IRQ_NONE;
+}
+
+static int efm32_uart_startup(struct uart_port *port)
+{
+       struct efm32_uart_port *efm_port = to_efm_port(port);
+       u32 location = 0;
+       struct efm32_uart_pdata *pdata = dev_get_platdata(port->dev);
+       int ret;
+
+       if (pdata)
+               location = UARTn_ROUTE_LOCATION(pdata->location);
+
+       ret = clk_enable(efm_port->clk);
+       if (ret) {
+               efm_debug(efm_port, "failed to enable clk\n");
+               goto err_clk_enable;
+       }
+       port->uartclk = clk_get_rate(efm_port->clk);
+
+       /* Enable pins at configured location */
+       efm32_uart_write32(efm_port, location | UARTn_ROUTE_RXPEN | UARTn_ROUTE_TXPEN,
+                       UARTn_ROUTE);
+
+       ret = request_irq(port->irq, efm32_uart_rxirq, 0,
+                       DRIVER_NAME, efm_port);
+       if (ret) {
+               efm_debug(efm_port, "failed to register rxirq\n");
+               goto err_request_irq_rx;
+       }
+
+       /* disable all irqs */
+       efm32_uart_write32(efm_port, 0, UARTn_IEN);
+
+       ret = request_irq(efm_port->txirq, efm32_uart_txirq, 0,
+                       DRIVER_NAME, efm_port);
+       if (ret) {
+               efm_debug(efm_port, "failed to register txirq\n");
+               free_irq(port->irq, efm_port);
+err_request_irq_rx:
+
+               clk_disable(efm_port->clk);
+       } else {
+               efm32_uart_write32(efm_port,
+                               UARTn_IF_RXDATAV | UARTn_IF_RXOF, UARTn_IEN);
+               efm32_uart_write32(efm_port, UARTn_CMD_RXEN, UARTn_CMD);
+       }
+
+err_clk_enable:
+       return ret;
+}
+
+static void efm32_uart_shutdown(struct uart_port *port)
+{
+       struct efm32_uart_port *efm_port = to_efm_port(port);
+
+       efm32_uart_write32(efm_port, 0, UARTn_IEN);
+       free_irq(port->irq, efm_port);
+
+       clk_disable(efm_port->clk);
+}
+
+static void efm32_uart_set_termios(struct uart_port *port,
+               struct ktermios *new, struct ktermios *old)
+{
+       struct efm32_uart_port *efm_port = to_efm_port(port);
+       unsigned long flags;
+       unsigned baud;
+       u32 clkdiv;
+       u32 frame = 0;
+
+       /* no modem control lines */
+       new->c_cflag &= ~(CRTSCTS | CMSPAR);
+
+       baud = uart_get_baud_rate(port, new, old,
+                       DIV_ROUND_CLOSEST(port->uartclk, 16 * 8192),
+                       DIV_ROUND_CLOSEST(port->uartclk, 16));
+
+       switch (new->c_cflag & CSIZE) {
+       case CS5:
+               frame |= UARTn_FRAME_DATABITS(5);
+               break;
+       case CS6:
+               frame |= UARTn_FRAME_DATABITS(6);
+               break;
+       case CS7:
+               frame |= UARTn_FRAME_DATABITS(7);
+               break;
+       case CS8:
+               frame |= UARTn_FRAME_DATABITS(8);
+               break;
+       }
+
+       if (new->c_cflag & CSTOPB)
+               /* the receiver only verifies the first stop bit */
+               frame |= UARTn_FRAME_STOPBITS_TWO;
+       else
+               frame |= UARTn_FRAME_STOPBITS_ONE;
+
+       if (new->c_cflag & PARENB) {
+               if (new->c_cflag & PARODD)
+                       frame |= UARTn_FRAME_PARITY_ODD;
+               else
+                       frame |= UARTn_FRAME_PARITY_EVEN;
+       } else
+               frame |= UARTn_FRAME_PARITY_NONE;
+
+       /*
+        * the 6 lowest bits of CLKDIV are dc, bit 6 has value 0.25.
+        * port->uartclk <= 14e6, so 4 * port->uartclk doesn't overflow.
+        */
+       clkdiv = (DIV_ROUND_CLOSEST(4 * port->uartclk, 16 * baud) - 4) << 6;
+
+       spin_lock_irqsave(&port->lock, flags);
+
+       efm32_uart_write32(efm_port,
+                       UARTn_CMD_TXDIS | UARTn_CMD_RXDIS, UARTn_CMD);
+
+       port->read_status_mask = UARTn_RXDATAX_RXDATA__MASK;
+       if (new->c_iflag & INPCK)
+               port->read_status_mask |=
+                       UARTn_RXDATAX_FERR | UARTn_RXDATAX_PERR;
+       if (new->c_iflag & (BRKINT | PARMRK))
+               port->read_status_mask |= SW_UARTn_RXDATAX_BERR;
+
+       port->ignore_status_mask = 0;
+       if (new->c_iflag & IGNPAR)
+               port->ignore_status_mask |=
+                       UARTn_RXDATAX_FERR | UARTn_RXDATAX_PERR;
+       if (new->c_iflag & IGNBRK)
+               port->ignore_status_mask |= SW_UARTn_RXDATAX_BERR;
+
+       uart_update_timeout(port, new->c_cflag, baud);
+
+       efm32_uart_write32(efm_port, UARTn_CTRL_TXBIL, UARTn_CTRL);
+       efm32_uart_write32(efm_port, frame, UARTn_FRAME);
+       efm32_uart_write32(efm_port, clkdiv, UARTn_CLKDIV);
+
+       efm32_uart_write32(efm_port, UARTn_CMD_TXEN | UARTn_CMD_RXEN,
+                       UARTn_CMD);
+
+       spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *efm32_uart_type(struct uart_port *port)
+{
+       return port->type == PORT_EFMUART ? "efm32-uart" : NULL;
+}
+
+static void efm32_uart_release_port(struct uart_port *port)
+{
+       struct efm32_uart_port *efm_port = to_efm_port(port);
+
+       clk_unprepare(efm_port->clk);
+       clk_put(efm_port->clk);
+       iounmap(port->membase);
+}
+
+static int efm32_uart_request_port(struct uart_port *port)
+{
+       struct efm32_uart_port *efm_port = to_efm_port(port);
+       int ret;
+
+       port->membase = ioremap(port->mapbase, 60);
+       if (!efm_port->port.membase) {
+               ret = -ENOMEM;
+               efm_debug(efm_port, "failed to remap\n");
+               goto err_ioremap;
+       }
+
+       efm_port->clk = clk_get(port->dev, NULL);
+       if (IS_ERR(efm_port->clk)) {
+               ret = PTR_ERR(efm_port->clk);
+               efm_debug(efm_port, "failed to get clock\n");
+               goto err_clk_get;
+       }
+
+       ret = clk_prepare(efm_port->clk);
+       if (ret) {
+               clk_put(efm_port->clk);
+err_clk_get:
+
+               iounmap(port->membase);
+err_ioremap:
+               return ret;
+       }
+       return 0;
+}
+
+static void efm32_uart_config_port(struct uart_port *port, int type)
+{
+       if (type & UART_CONFIG_TYPE &&
+                       !efm32_uart_request_port(port))
+               port->type = PORT_EFMUART;
+}
+
+static int efm32_uart_verify_port(struct uart_port *port,
+               struct serial_struct *serinfo)
+{
+       int ret = 0;
+
+       if (serinfo->type != PORT_UNKNOWN && serinfo->type != PORT_EFMUART)
+               ret = -EINVAL;
+
+       return ret;
+}
+
+static struct uart_ops efm32_uart_pops = {
+       .tx_empty = efm32_uart_tx_empty,
+       .set_mctrl = efm32_uart_set_mctrl,
+       .get_mctrl = efm32_uart_get_mctrl,
+       .stop_tx = efm32_uart_stop_tx,
+       .start_tx = efm32_uart_start_tx,
+       .stop_rx = efm32_uart_stop_rx,
+       .enable_ms = efm32_uart_enable_ms,
+       .break_ctl = efm32_uart_break_ctl,
+       .startup = efm32_uart_startup,
+       .shutdown = efm32_uart_shutdown,
+       .set_termios = efm32_uart_set_termios,
+       .type = efm32_uart_type,
+       .release_port = efm32_uart_release_port,
+       .request_port = efm32_uart_request_port,
+       .config_port = efm32_uart_config_port,
+       .verify_port = efm32_uart_verify_port,
+};
+
+static struct efm32_uart_port *efm32_uart_ports[5];
+
+#ifdef CONFIG_SERIAL_EFM32_UART_CONSOLE
+static void efm32_uart_console_putchar(struct uart_port *port, int ch)
+{
+       struct efm32_uart_port *efm_port = to_efm_port(port);
+       unsigned int timeout = 0x400;
+       u32 status;
+
+       while (1) {
+               status = efm32_uart_read32(efm_port, UARTn_STATUS);
+
+               if (status & UARTn_STATUS_TXBL)
+                       break;
+               if (!timeout--)
+                       return;
+       }
+       efm32_uart_write32(efm_port, ch, UARTn_TXDATA);
+}
+
+static void efm32_uart_console_write(struct console *co, const char *s,
+               unsigned int count)
+{
+       struct efm32_uart_port *efm_port = efm32_uart_ports[co->index];
+       u32 status = efm32_uart_read32(efm_port, UARTn_STATUS);
+       unsigned int timeout = 0x400;
+
+       if (!(status & UARTn_STATUS_TXENS))
+               efm32_uart_write32(efm_port, UARTn_CMD_TXEN, UARTn_CMD);
+
+       uart_console_write(&efm_port->port, s, count,
+                       efm32_uart_console_putchar);
+
+       /* Wait for the transmitter to become empty */
+       while (1) {
+               u32 status = efm32_uart_read32(efm_port, UARTn_STATUS);
+               if (status & UARTn_STATUS_TXC)
+                       break;
+               if (!timeout--)
+                       break;
+       }
+
+       if (!(status & UARTn_STATUS_TXENS))
+               efm32_uart_write32(efm_port, UARTn_CMD_TXDIS, UARTn_CMD);
+}
+
+static void efm32_uart_console_get_options(struct efm32_uart_port *efm_port,
+               int *baud, int *parity, int *bits)
+{
+       u32 ctrl = efm32_uart_read32(efm_port, UARTn_CTRL);
+       u32 route, clkdiv, frame;
+
+       if (ctrl & UARTn_CTRL_SYNC)
+               /* not operating in async mode */
+               return;
+
+       route = efm32_uart_read32(efm_port, UARTn_ROUTE);
+       if (!(route & UARTn_ROUTE_TXPEN))
+               /* tx pin not routed */
+               return;
+
+       clkdiv = efm32_uart_read32(efm_port, UARTn_CLKDIV);
+
+       *baud = DIV_ROUND_CLOSEST(4 * efm_port->port.uartclk,
+                       16 * (4 + (clkdiv >> 6)));
+
+       frame = efm32_uart_read32(efm_port, UARTn_FRAME);
+       if (frame & UARTn_FRAME_PARITY_ODD)
+               *parity = 'o';
+       else if (frame & UARTn_FRAME_PARITY_EVEN)
+               *parity = 'e';
+       else
+               *parity = 'n';
+
+       *bits = (frame & UARTn_FRAME_DATABITS__MASK) -
+                       UARTn_FRAME_DATABITS(4) + 4;
+
+       efm_debug(efm_port, "get_opts: options=%d%c%d\n",
+                       *baud, *parity, *bits);
+}
+
+static int efm32_uart_console_setup(struct console *co, char *options)
+{
+       struct efm32_uart_port *efm_port;
+       int baud = 115200;
+       int bits = 8;
+       int parity = 'n';
+       int flow = 'n';
+       int ret;
+
+       if (co->index < 0 || co->index >= ARRAY_SIZE(efm32_uart_ports)) {
+               unsigned i;
+               for (i = 0; i < ARRAY_SIZE(efm32_uart_ports); ++i) {
+                       if (efm32_uart_ports[i]) {
+                               pr_warn("efm32-console: fall back to console index %u (from %hhi)\n",
+                                               i, co->index);
+                               co->index = i;
+                               break;
+                       }
+               }
+       }
+
+       efm_port = efm32_uart_ports[co->index];
+       if (!efm_port) {
+               pr_warn("efm32-console: No port at %d\n", co->index);
+               return -ENODEV;
+       }
+
+       ret = clk_prepare(efm_port->clk);
+       if (ret) {
+               dev_warn(efm_port->port.dev,
+                               "console: clk_prepare failed: %d\n", ret);
+               return ret;
+       }
+
+       efm_port->port.uartclk = clk_get_rate(efm_port->clk);
+
+       if (options)
+               uart_parse_options(options, &baud, &parity, &bits, &flow);
+       else
+               efm32_uart_console_get_options(efm_port,
+                               &baud, &parity, &bits);
+
+       return uart_set_options(&efm_port->port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver efm32_uart_reg;
+
+static struct console efm32_uart_console = {
+       .name = DEV_NAME,
+       .write = efm32_uart_console_write,
+       .device = uart_console_device,
+       .setup = efm32_uart_console_setup,
+       .flags = CON_PRINTBUFFER,
+       .index = -1,
+       .data = &efm32_uart_reg,
+};
+
+#else
+#define efm32_uart_console (*(struct console *)NULL)
+#endif /* ifdef CONFIG_SERIAL_EFM32_UART_CONSOLE / else */
+
+static struct uart_driver efm32_uart_reg = {
+       .owner = THIS_MODULE,
+       .driver_name = DRIVER_NAME,
+       .dev_name = DEV_NAME,
+       .nr = ARRAY_SIZE(efm32_uart_ports),
+       .cons = &efm32_uart_console,
+};
+
+static int efm32_uart_probe_dt(struct platform_device *pdev,
+               struct efm32_uart_port *efm_port)
+{
+       struct device_node *np = pdev->dev.of_node;
+       int ret;
+
+       if (!np)
+               return 1;
+
+       ret = of_alias_get_id(np, "serial");
+       if (ret < 0) {
+               dev_err(&pdev->dev, "failed to get alias id: %d\n", ret);
+               return ret;
+       } else {
+               efm_port->port.line = ret;
+               return 0;
+       }
+
+}
+
+static int __devinit efm32_uart_probe(struct platform_device *pdev)
+{
+       struct efm32_uart_port *efm_port;
+       struct resource *res;
+       int ret;
+
+       efm_port = kzalloc(sizeof(*efm_port), GFP_KERNEL);
+       if (!efm_port) {
+               dev_dbg(&pdev->dev, "failed to allocate private data\n");
+               return -ENOMEM;
+       }
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!res) {
+               ret = -ENODEV;
+               dev_dbg(&pdev->dev, "failed to determine base address\n");
+               goto err_get_base;
+       }
+
+       if (resource_size(res) < 60) {
+               ret = -EINVAL;
+               dev_dbg(&pdev->dev, "memory resource too small\n");
+               goto err_too_small;
+       }
+
+       ret = platform_get_irq(pdev, 0);
+       if (ret <= 0) {
+               dev_dbg(&pdev->dev, "failed to get rx irq\n");
+               goto err_get_rxirq;
+       }
+
+       efm_port->port.irq = ret;
+
+       ret = platform_get_irq(pdev, 1);
+       if (ret <= 0)
+               ret = efm_port->port.irq + 1;
+
+       efm_port->txirq = ret;
+
+       efm_port->port.dev = &pdev->dev;
+       efm_port->port.mapbase = res->start;
+       efm_port->port.type = PORT_EFMUART;
+       efm_port->port.iotype = UPIO_MEM32;
+       efm_port->port.fifosize = 2;
+       efm_port->port.ops = &efm32_uart_pops;
+       efm_port->port.flags = UPF_BOOT_AUTOCONF;
+
+       ret = efm32_uart_probe_dt(pdev, efm_port);
+       if (ret > 0)
+               /* not created by device tree */
+               efm_port->port.line = pdev->id;
+
+       if (efm_port->port.line >= 0 &&
+                       efm_port->port.line < ARRAY_SIZE(efm32_uart_ports))
+               efm32_uart_ports[efm_port->port.line] = efm_port;
+
+       ret = uart_add_one_port(&efm32_uart_reg, &efm_port->port);
+       if (ret) {
+               dev_dbg(&pdev->dev, "failed to add port: %d\n", ret);
+
+               if (pdev->id >= 0 && pdev->id < ARRAY_SIZE(efm32_uart_ports))
+                       efm32_uart_ports[pdev->id] = NULL;
+err_get_rxirq:
+err_too_small:
+err_get_base:
+               kfree(efm_port);
+       } else {
+               platform_set_drvdata(pdev, efm_port);
+               dev_dbg(&pdev->dev, "\\o/\n");
+       }
+
+       return ret;
+}
+
+static int __devexit efm32_uart_remove(struct platform_device *pdev)
+{
+       struct efm32_uart_port *efm_port = platform_get_drvdata(pdev);
+
+       platform_set_drvdata(pdev, NULL);
+
+       uart_remove_one_port(&efm32_uart_reg, &efm_port->port);
+
+       if (pdev->id >= 0 && pdev->id < ARRAY_SIZE(efm32_uart_ports))
+               efm32_uart_ports[pdev->id] = NULL;
+
+       kfree(efm_port);
+
+       return 0;
+}
+
+static struct of_device_id efm32_uart_dt_ids[] = {
+       {
+               .compatible = "efm32,uart",
+       }, {
+               /* sentinel */
+       }
+};
+MODULE_DEVICE_TABLE(of, efm32_uart_dt_ids);
+
+static struct platform_driver efm32_uart_driver = {
+       .probe = efm32_uart_probe,
+       .remove = __devexit_p(efm32_uart_remove),
+
+       .driver = {
+               .name = DRIVER_NAME,
+               .owner = THIS_MODULE,
+               .of_match_table = efm32_uart_dt_ids,
+       },
+};
+
+static int __init efm32_uart_init(void)
+{
+       int ret;
+
+       ret = uart_register_driver(&efm32_uart_reg);
+       if (ret)
+               return ret;
+
+       ret = platform_driver_register(&efm32_uart_driver);
+       if (ret)
+               uart_unregister_driver(&efm32_uart_reg);
+
+       pr_info("EFM32 UART/USART driver\n");
+
+       return ret;
+}
+module_init(efm32_uart_init);
+
+static void __exit efm32_uart_exit(void)
+{
+       platform_driver_unregister(&efm32_uart_driver);
+       uart_unregister_driver(&efm32_uart_reg);
+}
+
+MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>");
+MODULE_DESCRIPTION("EFM32 UART/USART driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/include/linux/platform_data/efm32-uart.h b/include/linux/platform_data/efm32-uart.h
new file mode 100644 (file)
index 0000000..ed0e975
--- /dev/null
@@ -0,0 +1,18 @@
+/*
+ *
+ *
+ */
+#ifndef __LINUX_PLATFORM_DATA_EFM32_UART_H__
+#define __LINUX_PLATFORM_DATA_EFM32_UART_H__
+
+#include <linux/types.h>
+
+/**
+ * struct efm32_uart_pdata
+ * @location: pinmux location for the I/O pins (to be written to the ROUTE
+ *     register)
+ */
+struct efm32_uart_pdata {
+       u8 location;
+};
+#endif /* ifndef __LINUX_PLATFORM_DATA_EFM32_UART_H__ */
index c91ace70c21d5c282f4b8b860f6fabefc2368d47..585bfd03d2ee22b4fa9b0733c2b4d64c44b83d0b 100644 (file)
 /* Atheros AR933X SoC */
 #define PORT_AR933X    99
 
+/* Energy Micro efm32 SoC */
+#define PORT_EFMUART   100
 
 #ifdef __KERNEL__