their output to the standard serial port on the RealView
PB1176 platform.
-- config DEBUG_ROCKCHIP_UART
-- bool "Kernel low-level debugging messages via Rockchip UART"
++ config DEBUG_RK29_UART0
++ bool "Kernel low-level debugging messages via Rockchip RK29 UART0"
++ depends on ARCH_ROCKCHIP
++ select DEBUG_UART_8250
++ help
++ Say Y here if you want kernel low-level debugging support
++ on Rockchip based platforms.
++
++ config DEBUG_RK29_UART1
++ bool "Kernel low-level debugging messages via Rockchip RK29 UART1"
++ depends on ARCH_ROCKCHIP
++ select DEBUG_UART_8250
++ help
++ Say Y here if you want kernel low-level debugging support
++ on Rockchip based platforms.
++
++ config DEBUG_RK29_UART2
++ bool "Kernel low-level debugging messages via Rockchip RK29 UART2"
+ depends on ARCH_ROCKCHIP
++ select DEBUG_UART_8250
++ help
++ Say Y here if you want kernel low-level debugging support
++ on Rockchip based platforms.
++
++ config DEBUG_RK3X_UART0
++ bool "Kernel low-level debugging messages via Rockchip RK3X UART0"
++ depends on ARCH_ROCKCHIP
++ select DEBUG_UART_8250
++ help
++ Say Y here if you want kernel low-level debugging support
++ on Rockchip based platforms.
++
++ config DEBUG_RK3X_UART1
++ bool "Kernel low-level debugging messages via Rockchip RK3X UART1"
++ depends on ARCH_ROCKCHIP
++ select DEBUG_UART_8250
++ help
++ Say Y here if you want kernel low-level debugging support
++ on Rockchip based platforms.
++
++ config DEBUG_RK3X_UART2
++ bool "Kernel low-level debugging messages via Rockchip RK3X UART2"
++ depends on ARCH_ROCKCHIP
++ select DEBUG_UART_8250
++ help
++ Say Y here if you want kernel low-level debugging support
++ on Rockchip based platforms.
++
++ config DEBUG_RK3X_UART3
++ bool "Kernel low-level debugging messages via Rockchip RK3X UART3"
+ depends on ARCH_ROCKCHIP
++ select DEBUG_UART_8250
help
Say Y here if you want kernel low-level debugging support
on Rockchip based platforms.
Say Y here if you want kernel low-level debugging support
on Allwinner A1X based platforms on the UART1.
-- config DEBUG_TEGRA_UART
++ config TEGRA_DEBUG_UART_AUTO_ODMDATA
++ bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"
+ depends on ARCH_TEGRA
- bool "Use Tegra UART for low-level debug"
++ select DEBUG_TEGRA_UART
++ help
++ Automatically determines which UART to use for low-level
++ debug based on the ODMDATA value. This value is part of
++ the BCT, and is written to the boot memory device using
++ nvflash, or other flashing tool. When bits 19:18 are 3,
++ then bits 17:15 indicate which UART to use; 0/1/2/3/4
++ are UART A/B/C/D/E.
++
++ config TEGRA_DEBUG_UARTA
++ bool "Kernel low-level debugging messages via Tegra UART A"
++ depends on ARCH_TEGRA
++ select DEBUG_TEGRA_UART
++ help
++ Say Y here if you want kernel low-level debugging support
++ on Tegra based platforms.
++
++ config TEGRA_DEBUG_UARTB
++ bool "Kernel low-level debugging messages via Tegra UART B"
++ depends on ARCH_TEGRA
++ select DEBUG_TEGRA_UART
++ help
++ Say Y here if you want kernel low-level debugging support
++ on Tegra based platforms.
++
++ config TEGRA_DEBUG_UARTC
++ bool "Kernel low-level debugging messages via Tegra UART C"
+ depends on ARCH_TEGRA
- bool "Use Tegra UART for low-level debug"
++ select DEBUG_TEGRA_UART
++ help
++ Say Y here if you want kernel low-level debugging support
++ on Tegra based platforms.
++
++ config TEGRA_DEBUG_UARTD
++ bool "Kernel low-level debugging messages via Tegra UART D"
++ depends on ARCH_TEGRA
++ select DEBUG_TEGRA_UART
++ help
++ Say Y here if you want kernel low-level debugging support
++ on Tegra based platforms.
++
++ config TEGRA_DEBUG_UARTE
++ bool "Kernel low-level debugging messages via Tegra UART E"
++ depends on ARCH_TEGRA
++ select DEBUG_TEGRA_UART
help
Say Y here if you want kernel low-level debugging support
on Tegra based platforms.
Say Y here if you want the debug print routines to direct
their output to the uart1 port on SiRFmarco devices.
-- config DEBUG_STI_UART
++ config STIH41X_DEBUG_ASC2
++ bool "Use StiH415/416 ASC2 UART for low-level debug"
+ depends on ARCH_STI
- bool "Use StiH415/416 ASC for low-level debug"
++ select DEBUG_STI_UART
+ help
+ Say Y here if you want kernel low-level debugging support
- on StiH415/416 based platforms like B2000, B2020.
- It support UART2 and SBC_UART1.
++ on STiH415/416 based platforms like b2000, which has
++ default UART wired up to ASC2.
++
++ If unsure, say N.
++
++ config STIH41X_DEBUG_SBC_ASC1
++ bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
+ depends on ARCH_STI
- bool "Use StiH415/416 ASC for low-level debug"
++ select DEBUG_STI_UART
+ help
+ Say Y here if you want kernel low-level debugging support
- on StiH415/416 based platforms like B2000, B2020.
- It support UART2 and SBC_UART1.
++ on STiH415/416 based platforms like b2020. which has
++ default UART wired up to SBC ASC1.
If unsure, say N.
default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
default "mach/debug-macro.S"
++# Compatibility options for PL01x
++config DEBUG_UART_PL01X
++ def_bool ARCH_EP93XX || \
++ ARCH_INTEGRATOR || \
++ ARCH_SPEAR3XX || \
++ ARCH_SPEAR6XX || \
++ ARCH_SPEAR13XX || \
++ ARCH_VERSATILE
++
++# Compatibility options for 8250
++config DEBUG_UART_8250
++ def_bool ARCH_DOVE || ARCH_EBSA110 || \
++ (FOOTBRIDGE && !DEBUG_DC21285_PORT) || \
++ ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \
++ ARCH_IOP33X || ARCH_IXP4XX || ARCH_KIRKWOOD || \
++ ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
++
++config DEBUG_UART_PHYS
++ hex "Physical base address of debug UART"
++ default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0
++ default 0x01c28000 if DEBUG_SUNXI_UART0
++ default 0x01c28400 if DEBUG_SUNXI_UART1
++ default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1
++ default 0x01d0d000 if DEBUG_DAVINCI_DA8XX_UART2
++ default 0x02530c00 if DEBUG_KEYSTONE_UART0
++ default 0x02531000 if DEBUG_KEYSTONE_UART1
++ default 0x03010fe0 if ARCH_RPC
++ default 0x08108300 if DEBUG_DAVINCI_TNETV107X_UART1
++ default 0x10009000 if DEBUG_REALVIEW_STD_PORT || DEBUG_CNS3XXX || \
++ DEBUG_VEXPRESS_UART0_CA9
++ default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
++ default 0x10124000 if DEBUG_RK3X_UART0
++ default 0x10126000 if DEBUG_RK3X_UART1
++ default 0x101f1000 if ARCH_VERSATILE
++ default 0x101fb000 if DEBUG_NOMADIK_UART
++ default 0x16000000 if ARCH_INTEGRATOR
++ default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
++ default 0x20060000 if DEBUG_RK29_UART0
++ default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
++ default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
++ default 0x20201000 if DEBUG_BCM2835
++ default 0x40090000 if ARCH_LPC32XX
++ default 0x40100000 if DEBUG_PXA_UART1
++ default 0x42000000 if ARCH_GEMINI
++ default 0x7c0003f8 if FOOTBRIDGE
++ default 0x80230000 if DEBUG_PICOXCELL_UART
++ default 0x80070000 if DEBUG_IMX23_UART
++ default 0x80074000 if DEBUG_IMX28_UART
++ default 0x808c0000 if ARCH_EP93XX
++ default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
++ default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
++ default 0xc0013000 if DEBUG_U300_UART
++ default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
++ default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
++ default 0xd0000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
++ default 0xd0012000 if DEBUG_MVEBU_UART
++ default 0xd4017000 if DEBUG_MMP_UART2
++ default 0xd4018000 if DEBUG_MMP_UART3
++ default 0xe0000000 if ARCH_SPEAR13XX
++ default 0xf0000be0 if ARCH_EBSA110
++ default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE
++ default 0xf1012000 if ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \
++ ARCH_ORION5X
++ default 0xfe800000 if ARCH_IOP32X
++ default 0xffc02000 if DEBUG_SOCFPGA_UART
++ default 0xffd82340 if ARCH_IOP13XX
++ default 0xfff36000 if DEBUG_HIGHBANK_UART
++ default 0xfffff700 if ARCH_IOP33X
++ depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
++ DEBUG_UART_8250 || DEBUG_UART_PL01X
++
++config DEBUG_UART_VIRT
++ hex "Virtual base address of debug UART"
++ default 0xe0010fe0 if ARCH_RPC
++ default 0xf0000be0 if ARCH_EBSA110
++ default 0xf0009000 if DEBUG_CNS3XXX
++ default 0xf01fb000 if DEBUG_NOMADIK_UART
++ default 0xf0201000 if DEBUG_BCM2835
++ default 0xf11f1000 if ARCH_VERSATILE
++ default 0xf1600000 if ARCH_INTEGRATOR
++ default 0xf1c28000 if DEBUG_SUNXI_UART0
++ default 0xf1c28400 if DEBUG_SUNXI_UART1
++ default 0xf2100000 if DEBUG_PXA_UART1
++ default 0xf4090000 if ARCH_LPC32XX
++ default 0xf4200000 if ARCH_GEMINI
++ default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
++ default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
++ default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
++ default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
++ default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
++ default 0xfd000000 if ARCH_SPEAR13XX
++ default 0xfd012000 if ARCH_MV78XX0
++ default 0xfde12000 if ARCH_DOVE
++ default 0xfe012000 if ARCH_ORION5X
++ default 0xfe017000 if DEBUG_MMP_UART2
++ default 0xfe018000 if DEBUG_MMP_UART3
++ default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
++ default 0xfe230000 if DEBUG_PICOXCELL_UART
++ default 0xfe800000 if ARCH_IOP32X
++ default 0xfeb24000 if DEBUG_RK3X_UART0
++ default 0xfeb26000 if DEBUG_RK3X_UART1
++ default 0xfeb30c00 if DEBUG_KEYSTONE_UART0
++ default 0xfeb31000 if DEBUG_KEYSTONE_UART1
++ default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE
++ default 0xfed60000 if DEBUG_RK29_UART0
++ default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
++ default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
++ default 0xfec02000 if DEBUG_SOCFPGA_UART
++ default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
++ default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
++ default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2
++ default 0xfed12000 if ARCH_KIRKWOOD
++ default 0xfedc0000 if ARCH_EP93XX
++ default 0xfee003f8 if FOOTBRIDGE
++ default 0xfee08300 if DEBUG_DAVINCI_TNETV107X_UART1
++ default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
++ default 0xfee36000 if DEBUG_HIGHBANK_UART
++ default 0xfee82340 if ARCH_IOP13XX
++ default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
++ default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
++ default 0xfefff700 if ARCH_IOP33X
++ default 0xff003000 if DEBUG_U300_UART
++ default DEBUG_UART_PHYS if !MMU
++ depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
++ DEBUG_UART_8250 || DEBUG_UART_PL01X
++
++config DEBUG_UART_8250_SHIFT
++ int "Register offset shift for the 8250 debug UART"
++ depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
++ default 0 if FOOTBRIDGE || ARCH_IOP32X
++ default 2
++
++config DEBUG_UART_8250_WORD
++ bool "Use 32-bit accesses for 8250 UART"
++ depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
++ depends on DEBUG_UART_8250_SHIFT >= 2
++ default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \
++ ARCH_KEYSTONE || \
++ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
++ DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_DAVINCI_TNETV107X_UART1
++
++config DEBUG_UART_8250_FLOW_CONTROL
++ bool "Enable flow control for 8250 UART"
++ depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
++ default y if ARCH_EBSA110 || FOOTBRIDGE || ARCH_GEMINI || ARCH_RPC
++
config DEBUG_UNCOMPRESS
bool
- - default y if ARCH_MULTIPLATFORM && DEBUG_LL && \
- - !DEBUG_OMAP2PLUS_UART && \
+ + depends on ARCH_MULTIPLATFORM
+ + default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
!DEBUG_TEGRA_UART
+ + help
+ + This option influences the normal decompressor output for
+ + multiplatform kernels. Normally, multiplatform kernels disable
+ + decompressor output because it is not possible to know where to
+ + send the decompressor output.
+ +
+ + When this option is set, the selected DEBUG_LL output method
+ + will be re-used for normal decompressor output on multiplatform
+ + kernels.
+ +
config UNCOMPRESS_INCLUDE
string