]> git.karo-electronics.de Git - mv-sheeva.git/commitdiff
i2c-omap: Add support for omap34xx
authorChandra shekhar <x0044955@ti.com>
Fri, 21 Nov 2008 21:39:46 +0000 (13:39 -0800)
committerTony Lindgren <tony@atomide.com>
Fri, 21 Nov 2008 21:39:46 +0000 (13:39 -0800)
Add support for omap34xx

Signed-off-by: chandra shekhar <x0044955@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
drivers/i2c/busses/i2c-omap.c

index 9ae4b74f3d1a6017b636df911aa3bd12fc4c5853..3f7726a43125ef1fc4a54c6abdb8e3246f21c324 100644 (file)
@@ -156,7 +156,7 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
 
 static int omap_i2c_get_clocks(struct omap_i2c_dev *dev)
 {
-       if (cpu_is_omap16xx() || cpu_is_omap24xx()) {
+       if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
                dev->iclk = clk_get(dev->dev, "i2c_ick");
                if (IS_ERR(dev->iclk)) {
                        dev->iclk = NULL;
@@ -266,7 +266,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
                        psc = fclk_rate / 12000000;
        }
 
-       if (cpu_is_omap2430()) {
+       if (cpu_is_omap2430() || cpu_is_omap34xx()) {
 
                /* HSI2C controller internal clk rate should be 19.2 Mhz */
                internal_clk = 19200;
@@ -608,7 +608,8 @@ omap_i2c_isr(int this_irq, void *dev_id)
                                        *dev->buf++ = w;
                                        dev->buf_len--;
                                        /* Data reg from 2430 is 8 bit wide */
-                                       if (!cpu_is_omap2430()) {
+                                       if (!cpu_is_omap2430() &&
+                                                       !cpu_is_omap34xx()) {
                                                if (dev->buf_len) {
                                                        *dev->buf++ = w >> 8;
                                                        dev->buf_len--;
@@ -646,7 +647,8 @@ omap_i2c_isr(int this_irq, void *dev_id)
                                        w = *dev->buf++;
                                        dev->buf_len--;
                                        /* Data reg from  2430 is 8 bit wide */
-                                       if (!cpu_is_omap2430()) {
+                                       if (!cpu_is_omap2430() &&
+                                                       !cpu_is_omap34xx()) {
                                                if (dev->buf_len) {
                                                        w |= *dev->buf++ << 8;
                                                        dev->buf_len--;
@@ -694,7 +696,7 @@ omap_i2c_probe(struct platform_device *pdev)
        struct i2c_adapter      *adap;
        struct resource         *mem, *irq, *ioarea;
        int r;
-       u32 *speed = NULL;
+       u32 speed = 0;
 
        /* NOTE: driver uses the static register mapping */
        mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -722,11 +724,11 @@ omap_i2c_probe(struct platform_device *pdev)
        }
 
        if (pdev->dev.platform_data != NULL)
-               speed = (u32 *) pdev->dev.platform_data;
+               speed = *(u32 *)pdev->dev.platform_data;
        else
-               *speed = 100; /* Defualt speed */
+               speed = 100;    /* Defualt speed */
 
-       dev->speed = *speed;
+       dev->speed = speed;
        dev->dev = &pdev->dev;
        dev->irq = irq->start;
        dev->base = ioremap(mem->start, mem->end - mem->start + 1);
@@ -745,7 +747,7 @@ omap_i2c_probe(struct platform_device *pdev)
        if (cpu_is_omap15xx())
                dev->rev1 = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) < 0x20;
 
-       if (cpu_is_omap2430()) {
+       if (cpu_is_omap2430() || cpu_is_omap34xx()) {
                u16 s;
 
                /* Set up the fifo size - Get total size */