#include <linux/serial_reg.h>
-#include <plat/serial.h>
+#include "serial.h"
.pushsection .data
omap_uart_phys: .word 0x0
#endif /* ifndef __ASSEMBLER__ */
-#include <plat/serial.h>
+#include <mach/serial.h>
/*
* ---------------------------------------------------------------------------
--- /dev/null
+/*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#include <linux/init.h>
+
+/*
+ * Memory entry used for the DEBUG_LL UART configuration, relative to
+ * start of RAM. See also uncompress.h and debug-macro.S.
+ *
+ * Note that using a memory location for storing the UART configuration
+ * has at least two limitations:
+ *
+ * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
+ * uncompress code could then partially overwrite itself
+ * 2. We assume printascii is called at least once before paging_init,
+ * and addruart has a chance to read OMAP_UART_INFO
+ */
+#define OMAP_UART_INFO_OFS 0x3ffc
+
+/* OMAP1 serial ports */
+#define OMAP1_UART1_BASE 0xfffb0000
+#define OMAP1_UART2_BASE 0xfffb0800
+#define OMAP1_UART3_BASE 0xfffb9800
+
+#define OMAP_PORT_SHIFT 2
+#define OMAP7XX_PORT_SHIFT 0
+
+#define OMAP1510_BASE_BAUD (12000000/16)
+#define OMAP16XX_BASE_BAUD (48000000/16)
+
+/*
+ * DEBUG_LL port encoding stored into the UART1 scratchpad register by
+ * decomp_setup in uncompress.h
+ */
+#define OMAP1UART1 11
+#define OMAP1UART2 12
+#define OMAP1UART3 13
+
+#ifndef __ASSEMBLER__
+extern void omap_serial_init(void);
+#endif
+
+#endif
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <plat/serial.h>
+#include "serial.h"
#define MDR1_MODE_MASK 0x07
#include <plat/usb.h>
#include "gpmc.h"
#include "common.h"
-#include <plat/serial.h>
#include "mux.h"
#include "mmc.h"
#include <asm/proc-fns.h>
-#include <plat/serial.h>
-
#include "../plat-omap/common.h"
#include "i2c.h"
+#include "serial.h"
#define OMAP_INTC_START NR_IRQS
#include <linux/serial_reg.h>
-#include <plat/serial.h>
+#include <../mach-omap2/serial.h>
#define UART_OFFSET(addr) ((addr) & 0x00ffffff)
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <plat/serial.h>
+#include <../mach-omap2/serial.h>
#define MDR1_MODE_MASK 0x07
#include <asm/tlb.h>
#include <asm/mach/map.h>
-#include <plat/serial.h>
#include <plat-omap/dma-omap.h>
#include "../plat-omap/sram.h"
#include "clock44xx.h"
#include "omap-pm.h"
#include "sdrc.h"
+#include "serial.h"
/*
* The machine specific code may provide the extra mapping besides the
#include "prm-regbits-24xx.h"
#include "i2c.h"
#include "mmc.h"
+#include "serial.h"
#include "wd_timer.h"
/*
*/
#include <asm/sizes.h>
-#include <plat/serial.h>
-
#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
* published by the Free Software Foundation.
*/
-#include <plat/serial.h>
#include <plat-omap/dma-omap.h>
#include "../plat-omap/common.h"
*/
#include <asm/sizes.h>
-#include <plat/serial.h>
-
#include "omap_hwmod.h"
#include "l3_2xxx.h"
#include "l4_2xxx.h"
+#include "serial.h"
#include "omap_hwmod_common_data.h"
* published by the Free Software Foundation.
*/
-#include <plat/serial.h>
#include <linux/platform_data/gpio-omap.h>
#include <plat-omap/dma-omap.h>
#include <plat/dmtimer.h>
#include <linux/platform_data/gpio-omap.h>
#include <plat-omap/dma-omap.h>
-#include <plat/serial.h>
-
#include "l3_3xxx.h"
#include "l4_3xxx.h"
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "i2c.h"
#include "mmc.h"
#include "wd_timer.h"
+#include "serial.h"
/*
* OMAP3xxx hardware module integration data
#include <plat/omap-serial.h>
#include <plat-omap/dma-omap.h>
-#include <plat/serial.h>
#include "common.h"
#include "omap_hwmod.h"
#include "prm-regbits-34xx.h"
#include "control.h"
#include "mux.h"
+#include "serial.h"
/*
* NOTE: By default the serial auto_suspend timeout is disabled as it causes
*/
#define OMAP_UART_INFO_OFS 0x3ffc
-/* OMAP1 serial ports */
-#define OMAP1_UART1_BASE 0xfffb0000
-#define OMAP1_UART2_BASE 0xfffb0800
-#define OMAP1_UART3_BASE 0xfffb9800
-
/* OMAP2 serial ports */
#define OMAP2_UART1_BASE 0x4806a000
#define OMAP2_UART2_BASE 0x4806c000
#define ZOOM_UART_VIRT 0xfa400000
#define OMAP_PORT_SHIFT 2
-#define OMAP7XX_PORT_SHIFT 0
#define ZOOM_PORT_SHIFT 1
-#define OMAP1510_BASE_BAUD (12000000/16)
-#define OMAP16XX_BASE_BAUD (48000000/16)
#define OMAP24XX_BASE_BAUD (48000000/16)
/*
* DEBUG_LL port encoding stored into the UART1 scratchpad register by
* decomp_setup in uncompress.h
*/
-#define OMAP1UART1 11
-#define OMAP1UART2 12
-#define OMAP1UART3 13
#define OMAP2UART1 21
#define OMAP2UART2 22
#define OMAP2UART3 23