ARM: dts: mxs: remove old DMA binding data from client nodes

After mxs-dma driver adopts generic DMA device tree binding, channel
interrupt number is defined in DMA controller node, and channel ID is
listed in "dmas" property.  So the DMA channel interrupt number in
client nodes' "interrupts" property and fsl,<module>-dma-channel which
are used by old customized DMA binding can be removed now.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 587ceef81e45a5eeb6cb6da0ff5f643f29892669..1e528dbb7323f16a3237607694c9f0fa78b4f2e4 100644 (file)
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -76,23 +76,21 @@
                                #size-cells = <1>;
                                reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
                                reg-names = "gpmi-nand", "bch";
-                               interrupts = <13>, <56>;
-                               interrupt-names = "gpmi-dma", "bch";
+                               interrupts = <56>;
+                               interrupt-names = "bch";
                                clocks = <&clks 34>;
                                clock-names = "gpmi_io";
                                dmas = <&dma_apbh 4>;
                                dma-names = "rx-tx";
-                               fsl,gpmi-dma-channel = <4>;
                                status = "disabled";
                        };
 
                        ssp0: ssp@80010000 {
                                reg = <0x80010000 0x2000>;
-                               interrupts = <15 14>;
+                               interrupts = <15>;
                                clocks = <&clks 33>;
                                dmas = <&dma_apbh 1>;
                                dma-names = "rx-tx";
-                               fsl,ssp-dma-channel = <1>;
                                status = "disabled";
                        };
 
@@ -366,11 +364,10 @@
 
                        ssp1: ssp@80034000 {
                                reg = <0x80034000 0x2000>;
-                               interrupts = <2 20>;
+                               interrupts = <2>;
                                clocks = <&clks 33>;
                                dmas = <&dma_apbh 2>;
                                dma-names = "rx-tx";
-                               fsl,ssp-dma-channel = <2>;
                                status = "disabled";
                        };
 
@@ -472,7 +469,7 @@
                        auart0: serial@8006c000 {
                                compatible = "fsl,imx23-auart";
                                reg = <0x8006c000 0x2000>;
-                               interrupts = <24 25 23>;
+                               interrupts = <24>;
                                clocks = <&clks 32>;
                                dmas = <&dma_apbx 6>, <&dma_apbx 7>;
                                dma-names = "rx", "tx";
@@ -482,7 +479,7 @@
                        auart1: serial@8006e000 {
                                compatible = "fsl,imx23-auart";
                                reg = <0x8006e000 0x2000>;
-                               interrupts = <59 60 58>;
+                               interrupts = <59>;
                                clocks = <&clks 32>;
                                dmas = <&dma_apbx 8>, <&dma_apbx 9>;
                                dma-names = "rx", "tx";

diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 9524a05712810bba53382f2b066943cc03c7a675..db67eb6836147d4ebd634cee8f0fe1ddabe28345 100644 (file)
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -64,7 +64,7 @@
 
                        hsadc@80002000 {
                                reg = <0x80002000 0x2000>;
-                               interrupts = <13 87>;
+                               interrupts = <13>;
                                dmas = <&dma_apbh 12>;
                                dma-names = "rx";
                                status = "disabled";
@@ -98,13 +98,12 @@
                                #size-cells = <1>;
                                reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
                                reg-names = "gpmi-nand", "bch";
-                               interrupts = <88>, <41>;
-                               interrupt-names = "gpmi-dma", "bch";
+                               interrupts = <41>;
+                               interrupt-names = "bch";
                                clocks = <&clks 50>;
                                clock-names = "gpmi_io";
                                dmas = <&dma_apbh 4>;
                                dma-names = "rx-tx";
-                               fsl,gpmi-dma-channel = <4>;
                                status = "disabled";
                        };
 
@@ -112,11 +111,10 @@
                                #address-cells = <1>;
                                #size-cells = <0>;
                                reg = <0x80010000 0x2000>;
-                               interrupts = <96 82>;
+                               interrupts = <96>;
                                clocks = <&clks 46>;
                                dmas = <&dma_apbh 0>;
                                dma-names = "rx-tx";
-                               fsl,ssp-dma-channel = <0>;
                                status = "disabled";
                        };
 
@@ -124,11 +122,10 @@
                                #address-cells = <1>;
                                #size-cells = <0>;
                                reg = <0x80012000 0x2000>;
-                               interrupts = <97 83>;
+                               interrupts = <97>;
                                clocks = <&clks 47>;
                                dmas = <&dma_apbh 1>;
                                dma-names = "rx-tx";
-                               fsl,ssp-dma-channel = <1>;
                                status = "disabled";
                        };
 
@@ -136,11 +133,10 @@
                                #address-cells = <1>;
                                #size-cells = <0>;
                                reg = <0x80014000 0x2000>;
-                               interrupts = <98 84>;
+                               interrupts = <98>;
                                clocks = <&clks 48>;
                                dmas = <&dma_apbh 2>;
                                dma-names = "rx-tx";
-                               fsl,ssp-dma-channel = <2>;
                                status = "disabled";
                        };
 
@@ -148,11 +144,10 @@
                                #address-cells = <1>;
                                #size-cells = <0>;
                                reg = <0x80016000 0x2000>;
-                               interrupts = <99 85>;
+                               interrupts = <99>;
                                clocks = <&clks 49>;
                                dmas = <&dma_apbh 3>;
                                dma-names = "rx-tx";
-                               fsl,ssp-dma-channel = <3>;
                                status = "disabled";
                        };
 
@@ -759,7 +754,7 @@
                        lcdif@80030000 {
                                compatible = "fsl,imx28-lcdif";
                                reg = <0x80030000 0x2000>;
-                               interrupts = <38 86>;
+                               interrupts = <38>;
                                clocks = <&clks 55>;
                                dmas = <&dma_apbh 13>;
                                dma-names = "rx";
@@ -836,12 +831,11 @@
                        saif0: saif@80042000 {
                                compatible = "fsl,imx28-saif";
                                reg = <0x80042000 0x2000>;
-                               interrupts = <59 80>;
+                               interrupts = <59>;
                                #clock-cells = <0>;
                                clocks = <&clks 53>;
                                dmas = <&dma_apbx 4>;
                                dma-names = "rx-tx";
-                               fsl,saif-dma-channel = <4>;
                                status = "disabled";
                        };
 
@@ -853,11 +847,10 @@
                        saif1: saif@80046000 {
                                compatible = "fsl,imx28-saif";
                                reg = <0x80046000 0x2000>;
-                               interrupts = <58 81>;
+                               interrupts = <58>;
                                clocks = <&clks 54>;
                                dmas = <&dma_apbx 5>;
                                dma-names = "rx-tx";
-                               fsl,saif-dma-channel = <5>;
                                status = "disabled";
                        };
 
@@ -871,7 +864,7 @@
 
                        spdif@80054000 {
                                reg = <0x80054000 0x2000>;
-                               interrupts = <45 66>;
+                               interrupts = <45>;
                                dmas = <&dma_apbx 2>;
                                dma-names = "tx";
                                status = "disabled";
@@ -888,11 +881,10 @@
                                #size-cells = <0>;
                                compatible = "fsl,imx28-i2c";
                                reg = <0x80058000 0x2000>;
-                               interrupts = <111 68>;
+                               interrupts = <111>;
                                clock-frequency = <100000>;
                                dmas = <&dma_apbx 6>;
                                dma-names = "rx-tx";
-                               fsl,i2c-dma-channel = <6>;
                                status = "disabled";
                        };
 
@@ -901,11 +893,10 @@
                                #size-cells = <0>;
                                compatible = "fsl,imx28-i2c";
                                reg = <0x8005a000 0x2000>;
-                               interrupts = <110 69>;
+                               interrupts = <110>;
                                clock-frequency = <100000>;
                                dmas = <&dma_apbx 7>;
                                dma-names = "rx-tx";
-                               fsl,i2c-dma-channel = <7>;
                                status = "disabled";
                        };
 
@@ -928,10 +919,9 @@
                        auart0: serial@8006a000 {
                                compatible = "fsl,imx28-auart", "fsl,imx23-auart";
                                reg = <0x8006a000 0x2000>;
-                               interrupts = <112 70 71>;
+                               interrupts = <112>;
                                dmas = <&dma_apbx 8>, <&dma_apbx 9>;
                                dma-names = "rx", "tx";
-                               fsl,auart-dma-channel = <8 9>;
                                clocks = <&clks 45>;
                                status = "disabled";
                        };
@@ -939,7 +929,7 @@
                        auart1: serial@8006c000 {
                                compatible = "fsl,imx28-auart", "fsl,imx23-auart";
                                reg = <0x8006c000 0x2000>;
-                               interrupts = <113 72 73>;
+                               interrupts = <113>;
                                dmas = <&dma_apbx 10>, <&dma_apbx 11>;
                                dma-names = "rx", "tx";
                                clocks = <&clks 45>;
@@ -949,7 +939,7 @@
                        auart2: serial@8006e000 {
                                compatible = "fsl,imx28-auart", "fsl,imx23-auart";
                                reg = <0x8006e000 0x2000>;
-                               interrupts = <114 74 75>;
+                               interrupts = <114>;
                                dmas = <&dma_apbx 12>, <&dma_apbx 13>;
                                dma-names = "rx", "tx";
                                clocks = <&clks 45>;
@@ -959,7 +949,7 @@
                        auart3: serial@80070000 {
                                compatible = "fsl,imx28-auart", "fsl,imx23-auart";
                                reg = <0x80070000 0x2000>;
-                               interrupts = <115 76 77>;
+                               interrupts = <115>;
                                dmas = <&dma_apbx 14>, <&dma_apbx 15>;
                                dma-names = "rx", "tx";
                                clocks = <&clks 45>;
@@ -969,7 +959,7 @@
                        auart4: serial@80072000 {
                                compatible = "fsl,imx28-auart", "fsl,imx23-auart";
                                reg = <0x80072000 0x2000>;
-                               interrupts = <116 78 79>;
+                               interrupts = <116>;
                                dmas = <&dma_apbx 0>, <&dma_apbx 1>;
                                dma-names = "rx", "tx";
                                clocks = <&clks 45>;