ARM: dts: imx6: Add support for imx6q dmo edmqmx6

Signed-off-by: Silvio F <silvio.fricke@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 1c1fcf8dd2966a7437eca9617ec4c112d3b9598c..d9dece7593d6a20a4512e8383c9378eb11a14d1f 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -148,6 +148,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
        imx6dl-wandboard.dtb \
        imx6q-arm2.dtb \
        imx6q-cm-fx6.dtb \
+       imx6q-dmo-edmqmx6.dtb \
        imx6q-gw51xx.dtb \
        imx6q-gw52xx.dtb \
        imx6q-gw53xx.dtb \

diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
new file mode 100644 (file)
index 0000000..5d6bab3
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -0,0 +1,178 @@
+/*
+ * Copyright 2013 Data Modul AG
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+
+/ {
+       model = "Data Modul eDM-QMX6 Board";
+       compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
+
+       aliases {
+               gpio7 = &stmpe_gpio;
+       };
+
+       memory {
+               reg = <0x10000000 0x80000000>;
+       };
+
+       regulators {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               reg_3p3v: regulator@0 {
+                       compatible = "regulator-fixed";
+                       reg = <0>;
+                       regulator-name = "3P3V";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       regulator-always-on;
+               };
+
+               reg_usb_otg_vbus: regulator@1 {
+                       compatible = "regulator-fixed";
+                       reg = <1>;
+                       regulator-name = "usb_otg_vbus";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       gpio = <&gpio7 12 0>;
+               };
+
+               reg_usb_host1: regulator@2 {
+                       compatible = "regulator-fixed";
+                       reg = <2>;
+                       regulator-name = "usb_host1_en";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       gpio = <&gpio3 31 0>;
+                       enable-active-high;
+               };
+       };
+};
+
+&fec {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_enet>;
+       phy-mode = "rgmii";
+       phy-reset-gpios = <&gpio3 23 0>;
+       status = "okay";
+};
+
+&i2c2 {
+       clock-frequency = <100000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c2
+                    &pinctrl_stmpe>;
+       status = "okay";
+
+       stmpe: stmpe1601@40 {
+               compatible = "st,stmpe1601";
+               reg = <0x40>;
+               interrupts = <30 0>;
+               interrupt-parent = <&gpio3>;
+
+               stmpe_gpio: stmpe_gpio {
+                       compatible = "st,stmpe-gpio";
+               };
+       };
+
+       temp1: ad7414@4c {
+               compatible = "ad,ad7414";
+               reg = <0x4c>;
+       };
+
+       temp2: ad7414@4d {
+               compatible = "ad,ad7414";
+               reg = <0x4d>;
+       };
+
+       rtc: m41t62@68 {
+               compatible = "stm,m41t62";
+               reg = <0x68>;
+       };
+};
+
+&iomuxc {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_hog>;
+
+       imx6q-dmo-edmqmx6 {
+               pinctrl_hog: hoggrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
+                               MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
+                       >;
+               };
+
+               pinctrl_enet: enetgrp {
+                       fsl,pins = <MX6QDL_ENET_PINGRP1>;
+               };
+
+               pinctrl_i2c2: i2c2grp {
+                       fsl,pins = <MX6QDL_I2C2_PINGRP3>;
+               };
+
+               pinctrl_stmpe: stmpegrp {
+                       fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
+               };
+
+               pinctrl_uart1: uart1grp {
+                       fsl,pins = <MX6QDL_UART1_PINGRP2>;
+               };
+
+               pinctrl_uart2: uart2grp {
+                       fsl,pins = <MX6QDL_UART2_PINGRP1>;
+               };
+
+               pinctrl_usbotg: usbotggrp {
+                       fsl,pins = <MX6QDL_USBOTG_PINGRP1>;
+               };
+
+               pinctrl_usdhc3: usdhc3grp {
+                       fsl,pins = <MX6QDL_USDHC3_PINGRP2>;
+               };
+       };
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart1>;
+       status = "okay";
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart2>;
+       status = "okay";
+};
+
+&usbh1 {
+       vbus-supply = <&reg_usb_host1>;
+       disable-over-current;
+       status = "okay";
+};
+
+&usbotg {
+       vbus-supply = <&reg_usb_otg_vbus>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usbotg>;
+       disable-over-current;
+       status = "okay";
+};
+
+&usdhc3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usdhc3>;
+       vmmc-supply = <&reg_3p3v>;
+       status = "okay";
+};