Support the BCM4354 chip and introduce vendor specific command
parameter definitions.
Signed-off-by: Ilya Faenson <ifaenson@broadcom.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
} bcm_uart_subver_table[] = {
{ 0x410e, "BCM43341B0" }, /* 002.001.014 */
{ 0x4406, "BCM4324B3" }, /* 002.004.006 */
+ { 0x610c, "BCM4354" }, /* 003.001.012 */
{ }
};
switch ((rev & 0xf000) >> 12) {
case 0:
+ case 1:
case 3:
for (i = 0; bcm_uart_subver_table[i].name; i++) {
if (subver == bcm_uart_subver_table[i].subver) {
__u8 type;
} __packed;
+struct bcm_set_sleep_mode {
+ __u8 sleep_mode;
+ __u8 idle_host;
+ __u8 idle_dev;
+ __u8 bt_wake_active;
+ __u8 host_wake_active;
+ __u8 allow_host_sleep;
+ __u8 combine_modes;
+ __u8 tristate_control;
+ __u8 usb_auto_sleep;
+ __u8 usb_resume_timeout;
+ __u8 pulsed_host_wake;
+ __u8 break_to_host;
+} __packed;
+
+struct bcm_set_pcm_int_params {
+ __u8 routing;
+ __u8 rate;
+ __u8 frame_sync;
+ __u8 sync_mode;
+ __u8 clock_mode;
+} __packed;
+
+struct bcm_set_pcm_format_params {
+ __u8 lsb_first;
+ __u8 fill_value;
+ __u8 fill_method;
+ __u8 fill_num;
+ __u8 right_justify;
+} __packed;
+
#if IS_ENABLED(CONFIG_BT_BCM)
int btbcm_check_bdaddr(struct hci_dev *hdev);