]> git.karo-electronics.de Git - karo-tx-linux.git/commitdiff
PCI: designware: Check for iATU unroll support after initializing host
authorNiklas Cassel <niklas.cassel@axis.com>
Fri, 14 Oct 2016 21:54:55 +0000 (23:54 +0200)
committerBjorn Helgaas <bhelgaas@google.com>
Fri, 4 Nov 2016 20:28:55 +0000 (15:28 -0500)
dw_pcie_iatu_unroll_enabled() reads a dbi_base register.  Reading any
dbi_base register before pp->ops->host_init has been called causes
"imprecise external abort" on platforms like ARTPEC-6, where the PCIe
module is disabled at boot and first enabled in pp->ops->host_init.  Move
dw_pcie_iatu_unroll_enabled() to dw_pcie_setup_rc(), since it is after
pp->ops->host_init, but before pp->iatu_unroll_enabled is actually used.

Fixes: a0601a470537 ("PCI: designware: Add iATU Unroll feature")
Tested-by: James Le Cuirot <chewi@gentoo.org>
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Acked-by: Olof Johansson <olof@lixom.net>
drivers/pci/host/pcie-designware.c

index 035f50c03281c803f82d721c0a3c3a2c10a4a348..bed19994c1e94d4e32c134e58133c4acd8b8bd88 100644 (file)
@@ -637,8 +637,6 @@ int dw_pcie_host_init(struct pcie_port *pp)
                }
        }
 
-       pp->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pp);
-
        if (pp->ops->host_init)
                pp->ops->host_init(pp);
 
@@ -809,6 +807,11 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
 {
        u32 val;
 
+       /* get iATU unroll support */
+       pp->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pp);
+       dev_dbg(pp->dev, "iATU unroll: %s\n",
+               pp->iatu_unroll_enabled ? "enabled" : "disabled");
+
        /* set the number of lanes */
        val = dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL);
        val &= ~PORT_LINK_MODE_MASK;