/* Default configuration for physcial memcpy */
struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
- .channel_type = (STEDMA40_CHANNEL_IN_PHY_MODE |
- STEDMA40_LOW_PRIORITY_CHANNEL |
- STEDMA40_PCHAN_BASIC_MODE),
+ .mode = STEDMA40_MODE_PHYSICAL,
.dir = STEDMA40_MEM_TO_MEM,
- .src_info.endianess = STEDMA40_LITTLE_ENDIAN,
.src_info.data_width = STEDMA40_BYTE_WIDTH,
.src_info.psize = STEDMA40_PSIZE_PHY_1,
.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
- .dst_info.endianess = STEDMA40_LITTLE_ENDIAN,
.dst_info.data_width = STEDMA40_BYTE_WIDTH,
.dst_info.psize = STEDMA40_PSIZE_PHY_1,
.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
};
/* Default configuration for logical memcpy */
struct stedma40_chan_cfg dma40_memcpy_conf_log = {
- .channel_type = (STEDMA40_CHANNEL_IN_LOG_MODE |
- STEDMA40_LOW_PRIORITY_CHANNEL |
- STEDMA40_LCHAN_SRC_LOG_DST_LOG |
- STEDMA40_NO_TIM_FOR_LINK),
.dir = STEDMA40_MEM_TO_MEM,
- .src_info.endianess = STEDMA40_LITTLE_ENDIAN,
.src_info.data_width = STEDMA40_BYTE_WIDTH,
.src_info.psize = STEDMA40_PSIZE_LOG_1,
.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
- .dst_info.endianess = STEDMA40_LITTLE_ENDIAN,
.dst_info.data_width = STEDMA40_BYTE_WIDTH,
.dst_info.psize = STEDMA40_PSIZE_LOG_1,
.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
#define STEDMA40_DEV_DST_MEMORY (-1)
#define STEDMA40_DEV_SRC_MEMORY (-1)
-/*
- * Description of bitfields of channel_type variable is available in
- * the info structure.
- */
+enum stedma40_mode {
+ STEDMA40_MODE_LOGICAL = 0,
+ STEDMA40_MODE_PHYSICAL,
+ STEDMA40_MODE_OPERATION,
+};
-/* Priority */
-#define STEDMA40_INFO_PRIO_TYPE_POS 2
-#define STEDMA40_HIGH_PRIORITY_CHANNEL (0x1 << STEDMA40_INFO_PRIO_TYPE_POS)
-#define STEDMA40_LOW_PRIORITY_CHANNEL (0x2 << STEDMA40_INFO_PRIO_TYPE_POS)
-
-/* Mode */
-#define STEDMA40_INFO_CH_MODE_TYPE_POS 6
-#define STEDMA40_CHANNEL_IN_PHY_MODE (0x1 << STEDMA40_INFO_CH_MODE_TYPE_POS)
-#define STEDMA40_CHANNEL_IN_LOG_MODE (0x2 << STEDMA40_INFO_CH_MODE_TYPE_POS)
-#define STEDMA40_CHANNEL_IN_OPER_MODE (0x3 << STEDMA40_INFO_CH_MODE_TYPE_POS)
-
-/* Mode options */
-#define STEDMA40_INFO_CH_MODE_OPT_POS 8
-#define STEDMA40_PCHAN_BASIC_MODE (0x1 << STEDMA40_INFO_CH_MODE_OPT_POS)
-#define STEDMA40_PCHAN_MODULO_MODE (0x2 << STEDMA40_INFO_CH_MODE_OPT_POS)
-#define STEDMA40_PCHAN_DOUBLE_DST_MODE (0x3 << STEDMA40_INFO_CH_MODE_OPT_POS)
-#define STEDMA40_LCHAN_SRC_PHY_DST_LOG (0x1 << STEDMA40_INFO_CH_MODE_OPT_POS)
-#define STEDMA40_LCHAN_SRC_LOG_DST_PHS (0x2 << STEDMA40_INFO_CH_MODE_OPT_POS)
-#define STEDMA40_LCHAN_SRC_LOG_DST_LOG (0x3 << STEDMA40_INFO_CH_MODE_OPT_POS)
-
-/* Interrupt */
-#define STEDMA40_INFO_TIM_POS 10
-#define STEDMA40_NO_TIM_FOR_LINK (0x0 << STEDMA40_INFO_TIM_POS)
-#define STEDMA40_TIM_FOR_LINK (0x1 << STEDMA40_INFO_TIM_POS)
-
-/* End of channel_type configuration */
+enum stedma40_mode_opt {
+ STEDMA40_PCHAN_BASIC_MODE = 0,
+ STEDMA40_LCHAN_SRC_LOG_DST_LOG = 0,
+ STEDMA40_PCHAN_MODULO_MODE,
+ STEDMA40_PCHAN_DOUBLE_DST_MODE,
+ STEDMA40_LCHAN_SRC_PHY_DST_LOG,
+ STEDMA40_LCHAN_SRC_LOG_DST_PHY,
+};
#define STEDMA40_ESIZE_8_BIT 0x0
#define STEDMA40_ESIZE_16_BIT 0x1
STEDMA40_FLOW_CTRL,
};
-enum stedma40_endianess {
- STEDMA40_LITTLE_ENDIAN,
- STEDMA40_BIG_ENDIAN
-};
-
enum stedma40_periph_data_width {
STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT,
STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT,
/**
* struct stedma40_chan_cfg - dst/src channel configuration
*
- * @endianess: Endianess of the src/dst hardware
+ * @big_endian: true if the src/dst should be read as big endian
* @data_width: Data width of the src/dst hardware
* @p_size: Burst size
* @flow_ctrl: Flow control on/off.
*/
struct stedma40_half_channel_info {
- enum stedma40_endianess endianess;
+ bool big_endian;
enum stedma40_periph_data_width data_width;
int psize;
enum stedma40_flow_ctrl flow_ctrl;
* struct stedma40_chan_cfg - Structure to be filled by client drivers.
*
* @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH
- * @channel_type: priority, mode, mode options and interrupt configuration.
+ * @high_priority: true if high-priority
+ * @mode: channel mode: physical, logical, or operation
+ * @mode_opt: options for the chosen channel mode
* @src_dev_type: Src device type
* @dst_dev_type: Dst device type
* @src_info: Parameters for dst half channel
*/
struct stedma40_chan_cfg {
enum stedma40_xfer_dir dir;
- unsigned int channel_type;
+ bool high_priority;
+ enum stedma40_mode mode;
+ enum stedma40_mode_opt mode_opt;
int src_dev_type;
int dst_dev_type;
struct stedma40_half_channel_info src_info;
* @active: Active descriptor.
* @queue: Queued jobs.
* @dma_cfg: The client configuration of this dma channel.
+ * @configured: whether the dma_cfg configuration is valid
* @base: Pointer to the device instance struct.
* @src_def_cfg: Default cfg register setting for src.
* @dst_def_cfg: Default cfg register setting for dst.
struct list_head active;
struct list_head queue;
struct stedma40_chan_cfg dma_cfg;
+ bool configured;
struct d40_base *base;
/* Default register configurations */
u32 src_def_cfg;
return val;
}
+static u32 d40_get_prmo(struct d40_chan *d40c)
+{
+ static const unsigned int phy_map[] = {
+ [STEDMA40_PCHAN_BASIC_MODE]
+ = D40_DREG_PRMO_PCHAN_BASIC,
+ [STEDMA40_PCHAN_MODULO_MODE]
+ = D40_DREG_PRMO_PCHAN_MODULO,
+ [STEDMA40_PCHAN_DOUBLE_DST_MODE]
+ = D40_DREG_PRMO_PCHAN_DOUBLE_DST,
+ };
+ static const unsigned int log_map[] = {
+ [STEDMA40_LCHAN_SRC_PHY_DST_LOG]
+ = D40_DREG_PRMO_LCHAN_SRC_PHY_DST_LOG,
+ [STEDMA40_LCHAN_SRC_LOG_DST_PHY]
+ = D40_DREG_PRMO_LCHAN_SRC_LOG_DST_PHY,
+ [STEDMA40_LCHAN_SRC_LOG_DST_LOG]
+ = D40_DREG_PRMO_LCHAN_SRC_LOG_DST_LOG,
+ };
+
+ if (d40c->log_num == D40_PHY_CHAN)
+ return phy_map[d40c->dma_cfg.mode_opt];
+ else
+ return log_map[d40c->dma_cfg.mode_opt];
+}
+
static void d40_config_write(struct d40_chan *d40c)
{
u32 addr_base;
writel(var, d40c->base->virtbase + D40_DREG_PRMSE + addr_base);
/* Setup operational mode option register */
- var = ((d40c->dma_cfg.channel_type >> STEDMA40_INFO_CH_MODE_OPT_POS) &
- 0x3) << D40_CHAN_POS(d40c->phy_chan->num);
+ var = d40_get_prmo(d40c) << D40_CHAN_POS(d40c->phy_chan->num);
writel(var, d40c->base->virtbase + D40_DREG_PRMOE + addr_base);
int res = 0;
u32 dst_event_group = D40_TYPE_TO_GROUP(conf->dst_dev_type);
u32 src_event_group = D40_TYPE_TO_GROUP(conf->src_dev_type);
- bool is_log = (conf->channel_type & STEDMA40_CHANNEL_IN_OPER_MODE)
- == STEDMA40_CHANNEL_IN_LOG_MODE;
+ bool is_log = conf->mode == STEDMA40_MODE_LOGICAL;
if (!conf->dir) {
dev_err(&d40c->chan.dev->device, "[%s] Invalid direction.\n",
int j;
int log_num;
bool is_src;
- bool is_log = (d40c->dma_cfg.channel_type &
- STEDMA40_CHANNEL_IN_OPER_MODE)
- == STEDMA40_CHANNEL_IN_LOG_MODE;
-
+ bool is_log = d40c->dma_cfg.mode == STEDMA40_MODE_LOGICAL;
phys = d40c->base->phy_res;
return res;
}
d40c->phy_chan = NULL;
- /* Invalidate channel type */
- d40c->dma_cfg.channel_type = 0;
+ d40c->configured = false;
d40c->base->lookup_phy_chans[phy->num] = NULL;
return 0;
} else
err = d40_config_memcpy(d40c);
+ if (!err)
+ d40c->configured = true;
+
return err == 0;
}
EXPORT_SYMBOL(stedma40_filter);
d40c->completed = chan->cookie = 1;
- /*
- * If no dma configuration is set (channel_type == 0)
- * use default configuration (memcpy)
- */
- if (d40c->dma_cfg.channel_type == 0) {
-
+ /* If no dma configuration is set use default configuration (memcpy) */
+ if (!d40c->configured) {
err = d40_config_memcpy(d40c);
if (err) {
dev_err(&d40c->chan.dev->device,
/* Set up all the endpoint configs */
cfg->src_info.data_width = addr_width;
cfg->src_info.psize = psize;
- cfg->src_info.endianess = STEDMA40_LITTLE_ENDIAN;
+ cfg->src_info.big_endian = false;
cfg->src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL;
cfg->dst_info.data_width = addr_width;
cfg->dst_info.psize = psize;
- cfg->dst_info.endianess = STEDMA40_LITTLE_ENDIAN;
+ cfg->dst_info.big_endian = false;
cfg->dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL;
/* Fill in register values */
src |= 1 << D40_SREG_CFG_LOG_GIM_POS;
}
- if (cfg->channel_type & STEDMA40_HIGH_PRIORITY_CHANNEL) {
+ if (cfg->high_priority) {
src |= 1 << D40_SREG_CFG_PRI_POS;
dst |= 1 << D40_SREG_CFG_PRI_POS;
}
- src |= cfg->src_info.endianess << D40_SREG_CFG_LBE_POS;
- dst |= cfg->dst_info.endianess << D40_SREG_CFG_LBE_POS;
+ if (cfg->src_info.big_endian)
+ src |= 1 << D40_SREG_CFG_LBE_POS;
+ if (cfg->dst_info.big_endian)
+ dst |= 1 << D40_SREG_CFG_LBE_POS;
*src_cfg = src;
*dst_cfg = dst;
#define D40_DREG_PRMSO 0x014
#define D40_DREG_PRMOE 0x018
#define D40_DREG_PRMOO 0x01C
+#define D40_DREG_PRMO_PCHAN_BASIC 0x1
+#define D40_DREG_PRMO_PCHAN_MODULO 0x2
+#define D40_DREG_PRMO_PCHAN_DOUBLE_DST 0x3
+#define D40_DREG_PRMO_LCHAN_SRC_PHY_DST_LOG 0x1
+#define D40_DREG_PRMO_LCHAN_SRC_LOG_DST_PHY 0x2
+#define D40_DREG_PRMO_LCHAN_SRC_LOG_DST_LOG 0x3
+
#define D40_DREG_LCPA 0x020
#define D40_DREG_LCLA 0x024
#define D40_DREG_ACTIVE 0x050
projects / mv-sheeva.git / commitdiff