]> git.karo-electronics.de Git - karo-tx-linux.git/commitdiff
staging: comedi: ni_mio_common: tidy up the PFI subdevice init
authorH Hartley Sweeten <hsweeten@visionengravers.com>
Mon, 14 Jul 2014 19:24:03 +0000 (12:24 -0700)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Wed, 16 Jul 2014 20:24:44 +0000 (13:24 -0700)
For aesthetics, add some whitespace to the subdevice init and
tidy it up a bit.

Remove the need for the extra local variable.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/comedi/drivers/ni_mio_common.c

index 8f7edcdc1f1d0840ae79433e79397a7141105262..4932b4db83adeb475a1a3a446251d681af33067d 100644 (file)
@@ -5490,9 +5490,9 @@ static int ni_E_init(struct comedi_device *dev,
        const struct ni_board_struct *board = comedi_board(dev);
        struct ni_private *devpriv = dev->private;
        struct comedi_subdevice *s;
-       unsigned j;
        enum ni_gpct_variant counter_variant;
        int ret;
+       int i;
 
        if (board->n_aochan > MAX_N_AO_CHAN) {
                printk("bug! n_aochan > MAX_N_AO_CHAN\n");
@@ -5678,25 +5678,25 @@ static int ni_E_init(struct comedi_device *dev,
                s->insn_read    = ni_eeprom_insn_read;
        }
 
-       /* PFI */
+       /* Digital I/O (PFI) subdevice */
        s = &dev->subdevices[NI_PFI_DIO_SUBDEV];
-       s->type = COMEDI_SUBD_DIO;
-       s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL;
+       s->type         = COMEDI_SUBD_DIO;
+       s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL;
+       s->maxdata      = 1;
        if (devpriv->is_m_series) {
-               unsigned i;
-               s->n_chan = 16;
+               s->n_chan       = 16;
+               s->insn_bits    = ni_pfi_insn_bits;
+
                ni_writew(dev, s->state, M_Offset_PFI_DO);
                for (i = 0; i < NUM_PFI_OUTPUT_SELECT_REGS; ++i) {
                        ni_writew(dev, devpriv->pfi_output_select_reg[i],
                                  M_Offset_PFI_Output_Select(i + 1));
                }
        } else {
-               s->n_chan = 10;
+               s->n_chan       = 10;
        }
-       s->maxdata = 1;
-       if (devpriv->is_m_series)
-               s->insn_bits = &ni_pfi_insn_bits;
-       s->insn_config = &ni_pfi_insn_config;
+       s->insn_config  = ni_pfi_insn_config;
+
        ni_set_bits(dev, IO_Bidirection_Pin_Register, ~0, 0);
 
        /* cs5529 calibration adc */
@@ -5748,8 +5748,8 @@ static int ni_E_init(struct comedi_device *dev,
                return -ENOMEM;
 
        /* General purpose counters */
-       for (j = 0; j < NUM_GPCT; ++j) {
-               s = &dev->subdevices[NI_GPCT_SUBDEV(j)];
+       for (i = 0; i < NUM_GPCT; ++i) {
+               s = &dev->subdevices[NI_GPCT_SUBDEV(i)];
                s->type = COMEDI_SUBD_COUNTER;
                s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL;
                s->n_chan = 3;
@@ -5768,11 +5768,11 @@ static int ni_E_init(struct comedi_device *dev,
                s->cancel = &ni_gpct_cancel;
                s->async_dma_dir = DMA_BIDIRECTIONAL;
 #endif
-               s->private = &devpriv->counter_dev->counters[j];
+               s->private = &devpriv->counter_dev->counters[i];
 
-               devpriv->counter_dev->counters[j].chip_index = 0;
-               devpriv->counter_dev->counters[j].counter_index = j;
-               ni_tio_init_counter(&devpriv->counter_dev->counters[j]);
+               devpriv->counter_dev->counters[i].chip_index = 0;
+               devpriv->counter_dev->counters[i].counter_index = i;
+               ni_tio_init_counter(&devpriv->counter_dev->counters[i]);
        }
 
        /* Frequency output */