]> git.karo-electronics.de Git - karo-tx-linux.git/commitdiff
hwmon: Add driver for LM95234
authorGuenter Roeck <linux@roeck-us.net>
Sun, 10 Mar 2013 23:54:19 +0000 (16:54 -0700)
committerGuenter Roeck <linux@roeck-us.net>
Mon, 1 Apr 2013 17:21:03 +0000 (10:21 -0700)
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Documentation/hwmon/lm95234 [new file with mode: 0644]
drivers/hwmon/Kconfig
drivers/hwmon/Makefile
drivers/hwmon/lm95234.c [new file with mode: 0644]

diff --git a/Documentation/hwmon/lm95234 b/Documentation/hwmon/lm95234
new file mode 100644 (file)
index 0000000..a0e95dd
--- /dev/null
@@ -0,0 +1,36 @@
+Kernel driver lm95234
+=====================
+
+Supported chips:
+  * National Semiconductor / Texas Instruments LM95234
+    Addresses scanned: I2C 0x18, 0x4d, 0x4e
+    Datasheet: Publicly available at the Texas Instruments website
+               http://www.ti.com/product/lm95234
+
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+Description
+-----------
+
+LM95234 is an 11-bit digital temperature sensor with a 2-wire System Management
+Bus (SMBus) interface and TrueTherm technology that can very accurately monitor
+the temperature of four remote diodes as well as its own temperature.
+The four remote diodes can be external devices such as microprocessors,
+graphics processors or diode-connected 2N3904s. The LM95234's TruTherm
+beta compensation technology allows sensing of 90 nm or 65 nm process
+thermal diodes accurately.
+
+All temperature values are given in millidegrees Celsius. Temperature
+is provided within a range of -127 to +255 degrees (+127.875 degrees for
+the internal sensor). Resolution depends on temperature input and range.
+
+Each sensor has its own maximum limit, but the hysteresis is common to all
+channels. The hysteresis is configurable with the tem1_max_hyst attribute and
+affects the hysteresis on all channels. The first two external sensors also
+have a critical limit.
+
+The lm95234 driver can change its update interval to a fixed set of values.
+It will round up to the next selectable interval. See the datasheet for exact
+values. Reading sensor values more often will do no harm, but will return
+'old' values.
index 3d2b2e42e2a041d50d4514bd28c425d04670da39..923d07d8e1eacdcf7391256550d28632deaf55f1 100644 (file)
@@ -771,6 +771,16 @@ config SENSORS_LTC4261
          This driver can also be built as a module. If so, the module will
          be called ltc4261.
 
+config SENSORS_LM95234
+       tristate "National Semiconductor LM95234"
+       depends on I2C
+       help
+         If you say yes here you get support for the LM95234 temperature
+         sensor.
+
+         This driver can also be built as a module.  If so, the module
+         will be called lm95234.
+
 config SENSORS_LM95241
        tristate "National Semiconductor LM95241 and compatibles"
        depends on I2C
index 82975724d3af9d13b9250fbb72c7d0eeca7c70a4..5c71fe6a9c795cb75170d6fb94ab1f4361c3a2d6 100644 (file)
@@ -88,6 +88,7 @@ obj-$(CONFIG_SENSORS_LM87)    += lm87.o
 obj-$(CONFIG_SENSORS_LM90)     += lm90.o
 obj-$(CONFIG_SENSORS_LM92)     += lm92.o
 obj-$(CONFIG_SENSORS_LM93)     += lm93.o
+obj-$(CONFIG_SENSORS_LM95234)  += lm95234.o
 obj-$(CONFIG_SENSORS_LM95241)  += lm95241.o
 obj-$(CONFIG_SENSORS_LM95245)  += lm95245.o
 obj-$(CONFIG_SENSORS_LTC4151)  += ltc4151.o
diff --git a/drivers/hwmon/lm95234.c b/drivers/hwmon/lm95234.c
new file mode 100644 (file)
index 0000000..307c9ea
--- /dev/null
@@ -0,0 +1,769 @@
+/*
+ * Driver for Texas Instruments / National Semiconductor LM95234
+ *
+ * Copyright (c) 2013 Guenter Roeck <linux@roeck-us.net>
+ *
+ * Derived from lm95241.c
+ * Copyright (C) 2008, 2010 Davide Rizzo <elpa.rizzo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+
+#define DRVNAME "lm95234"
+
+static const unsigned short normal_i2c[] = { 0x18, 0x4d, 0x4e, I2C_CLIENT_END };
+
+/* LM95234 registers */
+#define LM95234_REG_MAN_ID             0xFE
+#define LM95234_REG_CHIP_ID            0xFF
+#define LM95234_REG_STATUS             0x02
+#define LM95234_REG_CONFIG             0x03
+#define LM95234_REG_CONVRATE           0x04
+#define LM95234_REG_STS_FAULT          0x07
+#define LM95234_REG_STS_TCRIT1         0x08
+#define LM95234_REG_STS_TCRIT2         0x09
+#define LM95234_REG_TEMPH(x)           ((x) + 0x10)
+#define LM95234_REG_TEMPL(x)           ((x) + 0x20)
+#define LM95234_REG_UTEMPH(x)          ((x) + 0x19)    /* Remote only */
+#define LM95234_REG_UTEMPL(x)          ((x) + 0x29)
+#define LM95234_REG_REM_MODEL          0x30
+#define LM95234_REG_REM_MODEL_STS      0x38
+#define LM95234_REG_OFFSET(x)          ((x) + 0x31)    /* Remote only */
+#define LM95234_REG_TCRIT1(x)          ((x) + 0x40)
+#define LM95234_REG_TCRIT2(x)          ((x) + 0x49)    /* Remote channel 1,2 */
+#define LM95234_REG_TCRIT_HYST         0x5a
+
+#define NATSEMI_MAN_ID                 0x01
+#define LM95234_CHIP_ID                        0x79
+
+/* Client data (each client gets its own) */
+struct lm95234_data {
+       struct device *hwmon_dev;
+       struct mutex update_lock;
+       unsigned long last_updated, interval;   /* in jiffies */
+       bool valid;             /* false until following fields are valid */
+       /* registers values */
+       int temp[5];            /* temperature (signed) */
+       u32 status;             /* fault/alarm status */
+       u8 tcrit1[5];           /* critical temperature limit */
+       u8 tcrit2[2];           /* high temperature limit */
+       s8 toffset[4];          /* remote temperature offset */
+       u8 thyst;               /* common hysteresis */
+
+       u8 sensor_type;         /* temperature sensor type */
+};
+
+static int lm95234_read_temp(struct i2c_client *client, int index, int *t)
+{
+       int val;
+       u16 temp = 0;
+
+       if (index) {
+               val = i2c_smbus_read_byte_data(client,
+                                              LM95234_REG_UTEMPH(index - 1));
+               if (val < 0)
+                       return val;
+               temp = val << 8;
+               val = i2c_smbus_read_byte_data(client,
+                                              LM95234_REG_UTEMPL(index - 1));
+               if (val < 0)
+                       return val;
+               temp |= val;
+               *t = temp;
+       }
+       /*
+        * Read signed temperature if unsigned temperature is 0,
+        * or if this is the local sensor.
+        */
+       if (!temp) {
+               val = i2c_smbus_read_byte_data(client,
+                                              LM95234_REG_TEMPH(index));
+               if (val < 0)
+                       return val;
+               temp = val << 8;
+               val = i2c_smbus_read_byte_data(client,
+                                              LM95234_REG_TEMPL(index));
+               if (val < 0)
+                       return val;
+               temp |= val;
+               *t = (s16)temp;
+       }
+       return 0;
+}
+
+static u16 update_intervals[] = { 143, 364, 1000, 2500 };
+
+/* Fill value cache. Must be called with update lock held. */
+
+static int lm95234_fill_cache(struct i2c_client *client)
+{
+       struct lm95234_data *data = i2c_get_clientdata(client);
+       int i, ret;
+
+       ret = i2c_smbus_read_byte_data(client, LM95234_REG_CONVRATE);
+       if (ret < 0)
+               return ret;
+
+       data->interval = msecs_to_jiffies(update_intervals[ret & 0x03]);
+
+       for (i = 0; i < ARRAY_SIZE(data->tcrit1); i++) {
+               ret = i2c_smbus_read_byte_data(client, LM95234_REG_TCRIT1(i));
+               if (ret < 0)
+                       return ret;
+               data->tcrit1[i] = ret;
+       }
+       for (i = 0; i < ARRAY_SIZE(data->tcrit2); i++) {
+               ret = i2c_smbus_read_byte_data(client, LM95234_REG_TCRIT2(i));
+               if (ret < 0)
+                       return ret;
+               data->tcrit2[i] = ret;
+       }
+       for (i = 0; i < ARRAY_SIZE(data->toffset); i++) {
+               ret = i2c_smbus_read_byte_data(client, LM95234_REG_OFFSET(i));
+               if (ret < 0)
+                       return ret;
+               data->toffset[i] = ret;
+       }
+
+       ret = i2c_smbus_read_byte_data(client, LM95234_REG_TCRIT_HYST);
+       if (ret < 0)
+               return ret;
+       data->thyst = ret;
+
+       ret = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL);
+       if (ret < 0)
+               return ret;
+       data->sensor_type = ret;
+
+       return 0;
+}
+
+static int lm95234_update_device(struct i2c_client *client,
+                                struct lm95234_data *data)
+{
+       int ret;
+
+       mutex_lock(&data->update_lock);
+
+       if (time_after(jiffies, data->last_updated + data->interval) ||
+           !data->valid) {
+               int i;
+
+               if (!data->valid) {
+                       ret = lm95234_fill_cache(client);
+                       if (ret < 0)
+                               goto abort;
+               }
+
+               data->valid = false;
+               for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
+                       ret = lm95234_read_temp(client, i, &data->temp[i]);
+                       if (ret < 0)
+                               goto abort;
+               }
+
+               ret = i2c_smbus_read_byte_data(client, LM95234_REG_STS_FAULT);
+               if (ret < 0)
+                       goto abort;
+               data->status = ret;
+
+               ret = i2c_smbus_read_byte_data(client, LM95234_REG_STS_TCRIT1);
+               if (ret < 0)
+                       goto abort;
+               data->status |= ret << 8;
+
+               ret = i2c_smbus_read_byte_data(client, LM95234_REG_STS_TCRIT2);
+               if (ret < 0)
+                       goto abort;
+               data->status |= ret << 16;
+
+               data->last_updated = jiffies;
+               data->valid = true;
+       }
+       ret = 0;
+abort:
+       mutex_unlock(&data->update_lock);
+
+       return ret;
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
+                        char *buf)
+{
+       struct i2c_client *client = to_i2c_client(dev);
+       struct lm95234_data *data = i2c_get_clientdata(client);
+       int index = to_sensor_dev_attr(attr)->index;
+       int ret = lm95234_update_device(client, data);
+
+       if (ret)
+               return ret;
+
+       return sprintf(buf, "%d\n",
+                      DIV_ROUND_CLOSEST(data->temp[index] * 125, 32));
+}
+
+static ssize_t show_alarm(struct device *dev,
+                         struct device_attribute *attr, char *buf)
+{
+       struct i2c_client *client = to_i2c_client(dev);
+       struct lm95234_data *data = i2c_get_clientdata(client);
+       u32 mask = to_sensor_dev_attr(attr)->index;
+       int ret = lm95234_update_device(client, data);
+
+       if (ret)
+               return ret;
+
+       return sprintf(buf, "%u", !!(data->status & mask));
+}
+
+static ssize_t show_type(struct device *dev, struct device_attribute *attr,
+                        char *buf)
+{
+       struct i2c_client *client = to_i2c_client(dev);
+       struct lm95234_data *data = i2c_get_clientdata(client);
+       u8 mask = to_sensor_dev_attr(attr)->index;
+       int ret = lm95234_update_device(client, data);
+
+       if (ret)
+               return ret;
+
+       return sprintf(buf, data->sensor_type & mask ? "1\n" : "2\n");
+}
+
+static ssize_t set_type(struct device *dev, struct device_attribute *attr,
+                       const char *buf, size_t count)
+{
+       struct i2c_client *client = to_i2c_client(dev);
+       struct lm95234_data *data = i2c_get_clientdata(client);
+       unsigned long val;
+       u8 mask = to_sensor_dev_attr(attr)->index;
+       int ret = lm95234_update_device(client, data);
+
+       if (ret)
+               return ret;
+
+       ret = kstrtoul(buf, 10, &val);
+       if (ret < 0)
+               return ret;
+
+       if (val != 1 && val != 2)
+               return -EINVAL;
+
+       mutex_lock(&data->update_lock);
+       if (val == 1)
+               data->sensor_type |= mask;
+       else
+               data->sensor_type &= ~mask;
+       data->valid = false;
+       i2c_smbus_write_byte_data(client, LM95234_REG_REM_MODEL,
+                                 data->sensor_type);
+       mutex_unlock(&data->update_lock);
+
+       return count;
+}
+
+static ssize_t show_tcrit2(struct device *dev, struct device_attribute *attr,
+                          char *buf)
+{
+       struct i2c_client *client = to_i2c_client(dev);
+       struct lm95234_data *data = i2c_get_clientdata(client);
+       int index = to_sensor_dev_attr(attr)->index;
+       int ret = lm95234_update_device(client, data);
+
+       if (ret)
+               return ret;
+
+       return sprintf(buf, "%u", data->tcrit2[index] * 1000);
+}
+
+static ssize_t set_tcrit2(struct device *dev, struct device_attribute *attr,
+                         const char *buf, size_t count)
+{
+       struct i2c_client *client = to_i2c_client(dev);
+       struct lm95234_data *data = i2c_get_clientdata(client);
+       int index = to_sensor_dev_attr(attr)->index;
+       long val;
+       int ret = lm95234_update_device(client, data);
+
+       if (ret)
+               return ret;
+
+       ret = kstrtol(buf, 10, &val);
+       if (ret < 0)
+               return ret;
+
+       val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, index ? 255 : 127);
+
+       mutex_lock(&data->update_lock);
+       data->tcrit2[index] = val;
+       i2c_smbus_write_byte_data(client, LM95234_REG_TCRIT2(index), val);
+       mutex_unlock(&data->update_lock);
+
+       return count;
+}
+
+static ssize_t show_tcrit2_hyst(struct device *dev,
+                               struct device_attribute *attr, char *buf)
+{
+       struct i2c_client *client = to_i2c_client(dev);
+       struct lm95234_data *data = i2c_get_clientdata(client);
+       int index = to_sensor_dev_attr(attr)->index;
+       int ret = lm95234_update_device(client, data);
+
+       if (ret)
+               return ret;
+
+       /* Result can be negative, so be careful with unsigned operands */
+       return sprintf(buf, "%d",
+                      ((int)data->tcrit2[index] - (int)data->thyst) * 1000);
+}
+
+static ssize_t show_tcrit1(struct device *dev, struct device_attribute *attr,
+                          char *buf)
+{
+       struct i2c_client *client = to_i2c_client(dev);
+       struct lm95234_data *data = i2c_get_clientdata(client);
+       int index = to_sensor_dev_attr(attr)->index;
+
+       return sprintf(buf, "%u", data->tcrit1[index] * 1000);
+}
+
+static ssize_t set_tcrit1(struct device *dev, struct device_attribute *attr,
+                         const char *buf, size_t count)
+{
+       struct i2c_client *client = to_i2c_client(dev);
+       struct lm95234_data *data = i2c_get_clientdata(client);
+       int index = to_sensor_dev_attr(attr)->index;
+       long val;
+       int ret = lm95234_update_device(client, data);
+
+       if (ret)
+               return ret;
+
+       ret = kstrtol(buf, 10, &val);
+       if (ret < 0)
+               return ret;
+
+       val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, 255);
+
+       mutex_lock(&data->update_lock);
+       data->tcrit1[index] = val;
+       i2c_smbus_write_byte_data(client, LM95234_REG_TCRIT1(index), val);
+       mutex_unlock(&data->update_lock);
+
+       return count;
+}
+
+static ssize_t show_tcrit1_hyst(struct device *dev,
+                               struct device_attribute *attr, char *buf)
+{
+       struct i2c_client *client = to_i2c_client(dev);
+       struct lm95234_data *data = i2c_get_clientdata(client);
+       int index = to_sensor_dev_attr(attr)->index;
+       int ret = lm95234_update_device(client, data);
+
+       if (ret)
+               return ret;
+
+       /* Result can be negative, so be careful with unsigned operands */
+       return sprintf(buf, "%d",
+                      ((int)data->tcrit1[index] - (int)data->thyst) * 1000);
+}
+
+static ssize_t set_tcrit1_hyst(struct device *dev,
+                              struct device_attribute *attr,
+                              const char *buf, size_t count)
+{
+       struct i2c_client *client = to_i2c_client(dev);
+       struct lm95234_data *data = i2c_get_clientdata(client);
+       int index = to_sensor_dev_attr(attr)->index;
+       long val;
+       int ret = lm95234_update_device(client, data);
+
+       if (ret)
+               return ret;
+
+       ret = kstrtol(buf, 10, &val);
+       if (ret < 0)
+               return ret;
+
+       val = DIV_ROUND_CLOSEST(val, 1000);
+       val = clamp_val((int)data->tcrit1[index] - val, 0, 31);
+
+       mutex_lock(&data->update_lock);
+       data->thyst = val;
+       i2c_smbus_write_byte_data(client, LM95234_REG_TCRIT_HYST, val);
+       mutex_unlock(&data->update_lock);
+
+       return count;
+}
+
+static ssize_t show_offset(struct device *dev, struct device_attribute *attr,
+                          char *buf)
+{
+       struct i2c_client *client = to_i2c_client(dev);
+       struct lm95234_data *data = i2c_get_clientdata(client);
+       int index = to_sensor_dev_attr(attr)->index;
+       int ret = lm95234_update_device(client, data);
+
+       if (ret)
+               return ret;
+
+       return sprintf(buf, "%d", data->toffset[index] * 500);
+}
+
+static ssize_t set_offset(struct device *dev, struct device_attribute *attr,
+                         const char *buf, size_t count)
+{
+       struct i2c_client *client = to_i2c_client(dev);
+       struct lm95234_data *data = i2c_get_clientdata(client);
+       int index = to_sensor_dev_attr(attr)->index;
+       long val;
+       int ret = lm95234_update_device(client, data);
+
+       if (ret)
+               return ret;
+
+       ret = kstrtol(buf, 10, &val);
+       if (ret < 0)
+               return ret;
+
+       /* Accuracy is 1/2 degrees C */
+       val = clamp_val(DIV_ROUND_CLOSEST(val, 500), -128, 127);
+
+       mutex_lock(&data->update_lock);
+       data->toffset[index] = val;
+       i2c_smbus_write_byte_data(client, LM95234_REG_OFFSET(index), val);
+       mutex_unlock(&data->update_lock);
+
+       return count;
+}
+
+static ssize_t show_interval(struct device *dev, struct device_attribute *attr,
+                            char *buf)
+{
+       struct i2c_client *client = to_i2c_client(dev);
+       struct lm95234_data *data = i2c_get_clientdata(client);
+       int ret = lm95234_update_device(client, data);
+
+       if (ret)
+               return ret;
+
+       return sprintf(buf, "%lu\n",
+                      DIV_ROUND_CLOSEST(data->interval * 1000, HZ));
+}
+
+static ssize_t set_interval(struct device *dev, struct device_attribute *attr,
+                           const char *buf, size_t count)
+{
+       struct i2c_client *client = to_i2c_client(dev);
+       struct lm95234_data *data = i2c_get_clientdata(client);
+       unsigned long val;
+       u8 regval;
+       int ret = lm95234_update_device(client, data);
+
+       if (ret)
+               return ret;
+
+       ret = kstrtoul(buf, 10, &val);
+       if (ret < 0)
+               return ret;
+
+       for (regval = 0; regval < 3; regval++) {
+               if (val <= update_intervals[regval])
+                       break;
+       }
+
+       mutex_lock(&data->update_lock);
+       data->interval = msecs_to_jiffies(update_intervals[regval]);
+       i2c_smbus_write_byte_data(client, LM95234_REG_CONVRATE, regval);
+       mutex_unlock(&data->update_lock);
+
+       return count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_temp, NULL, 4);
+
+static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL,
+                         BIT(0) | BIT(1));
+static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL,
+                         BIT(2) | BIT(3));
+static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_alarm, NULL,
+                         BIT(4) | BIT(5));
+static SENSOR_DEVICE_ATTR(temp5_fault, S_IRUGO, show_alarm, NULL,
+                         BIT(6) | BIT(7));
+
+static SENSOR_DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type, set_type,
+                         BIT(1));
+static SENSOR_DEVICE_ATTR(temp3_type, S_IWUSR | S_IRUGO, show_type, set_type,
+                         BIT(2));
+static SENSOR_DEVICE_ATTR(temp4_type, S_IWUSR | S_IRUGO, show_type, set_type,
+                         BIT(3));
+static SENSOR_DEVICE_ATTR(temp5_type, S_IWUSR | S_IRUGO, show_type, set_type,
+                         BIT(4));
+
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_tcrit1,
+                         set_tcrit1, 0);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_tcrit2,
+                         set_tcrit2, 0);
+static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_tcrit2,
+                         set_tcrit2, 1);
+static SENSOR_DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_tcrit1,
+                         set_tcrit1, 3);
+static SENSOR_DEVICE_ATTR(temp5_max, S_IWUSR | S_IRUGO, show_tcrit1,
+                         set_tcrit1, 4);
+
+static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, show_tcrit1_hyst,
+                         set_tcrit1_hyst, 0);
+static SENSOR_DEVICE_ATTR(temp2_max_hyst, S_IRUGO, show_tcrit2_hyst, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp3_max_hyst, S_IRUGO, show_tcrit2_hyst, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp4_max_hyst, S_IRUGO, show_tcrit1_hyst, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp5_max_hyst, S_IRUGO, show_tcrit1_hyst, NULL, 4);
+
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL,
+                         BIT(0 + 8));
+static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL,
+                         BIT(1 + 16));
+static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_alarm, NULL,
+                         BIT(2 + 16));
+static SENSOR_DEVICE_ATTR(temp4_max_alarm, S_IRUGO, show_alarm, NULL,
+                         BIT(3 + 8));
+static SENSOR_DEVICE_ATTR(temp5_max_alarm, S_IRUGO, show_alarm, NULL,
+                         BIT(4 + 8));
+
+static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_tcrit1,
+                         set_tcrit1, 1);
+static SENSOR_DEVICE_ATTR(temp3_crit, S_IWUSR | S_IRUGO, show_tcrit1,
+                         set_tcrit1, 2);
+
+static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_tcrit1_hyst, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO, show_tcrit1_hyst, NULL, 2);
+
+static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL,
+                         BIT(1 + 8));
+static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL,
+                         BIT(2 + 8));
+
+static SENSOR_DEVICE_ATTR(temp2_offset, S_IWUSR | S_IRUGO, show_offset,
+                         set_offset, 0);
+static SENSOR_DEVICE_ATTR(temp3_offset, S_IWUSR | S_IRUGO, show_offset,
+                         set_offset, 1);
+static SENSOR_DEVICE_ATTR(temp4_offset, S_IWUSR | S_IRUGO, show_offset,
+                         set_offset, 2);
+static SENSOR_DEVICE_ATTR(temp5_offset, S_IWUSR | S_IRUGO, show_offset,
+                         set_offset, 3);
+
+static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval,
+                  set_interval);
+
+static struct attribute *lm95234_attributes[] = {
+       &sensor_dev_attr_temp1_input.dev_attr.attr,
+       &sensor_dev_attr_temp2_input.dev_attr.attr,
+       &sensor_dev_attr_temp3_input.dev_attr.attr,
+       &sensor_dev_attr_temp4_input.dev_attr.attr,
+       &sensor_dev_attr_temp5_input.dev_attr.attr,
+       &sensor_dev_attr_temp2_fault.dev_attr.attr,
+       &sensor_dev_attr_temp3_fault.dev_attr.attr,
+       &sensor_dev_attr_temp4_fault.dev_attr.attr,
+       &sensor_dev_attr_temp5_fault.dev_attr.attr,
+       &sensor_dev_attr_temp2_type.dev_attr.attr,
+       &sensor_dev_attr_temp3_type.dev_attr.attr,
+       &sensor_dev_attr_temp4_type.dev_attr.attr,
+       &sensor_dev_attr_temp5_type.dev_attr.attr,
+       &sensor_dev_attr_temp1_max.dev_attr.attr,
+       &sensor_dev_attr_temp2_max.dev_attr.attr,
+       &sensor_dev_attr_temp3_max.dev_attr.attr,
+       &sensor_dev_attr_temp4_max.dev_attr.attr,
+       &sensor_dev_attr_temp5_max.dev_attr.attr,
+       &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
+       &sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
+       &sensor_dev_attr_temp3_max_hyst.dev_attr.attr,
+       &sensor_dev_attr_temp4_max_hyst.dev_attr.attr,
+       &sensor_dev_attr_temp5_max_hyst.dev_attr.attr,
+       &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+       &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
+       &sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
+       &sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
+       &sensor_dev_attr_temp5_max_alarm.dev_attr.attr,
+       &sensor_dev_attr_temp2_crit.dev_attr.attr,
+       &sensor_dev_attr_temp3_crit.dev_attr.attr,
+       &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
+       &sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
+       &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
+       &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
+       &sensor_dev_attr_temp2_offset.dev_attr.attr,
+       &sensor_dev_attr_temp3_offset.dev_attr.attr,
+       &sensor_dev_attr_temp4_offset.dev_attr.attr,
+       &sensor_dev_attr_temp5_offset.dev_attr.attr,
+       &dev_attr_update_interval.attr,
+       NULL
+};
+
+static const struct attribute_group lm95234_group = {
+       .attrs = lm95234_attributes,
+};
+
+static int lm95234_detect(struct i2c_client *client,
+                         struct i2c_board_info *info)
+{
+       struct i2c_adapter *adapter = client->adapter;
+       int mfg_id, chip_id, val;
+
+       if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+               return -ENODEV;
+
+       mfg_id = i2c_smbus_read_byte_data(client, LM95234_REG_MAN_ID);
+       if (mfg_id != NATSEMI_MAN_ID)
+               return -ENODEV;
+
+       chip_id = i2c_smbus_read_byte_data(client, LM95234_REG_CHIP_ID);
+       if (chip_id != LM95234_CHIP_ID)
+               return -ENODEV;
+
+       val = i2c_smbus_read_byte_data(client, LM95234_REG_STATUS);
+       if (val & 0x30)
+               return -ENODEV;
+
+       val = i2c_smbus_read_byte_data(client, LM95234_REG_CONFIG);
+       if (val & 0xbc)
+               return -ENODEV;
+
+       val = i2c_smbus_read_byte_data(client, LM95234_REG_CONVRATE);
+       if (val & 0xfc)
+               return -ENODEV;
+
+       val = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL);
+       if (val & 0xe1)
+               return -ENODEV;
+
+       val = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL_STS);
+       if (val & 0xe1)
+               return -ENODEV;
+
+       strlcpy(info->type, "lm95234", I2C_NAME_SIZE);
+       return 0;
+}
+
+static int lm95234_init_client(struct i2c_client *client)
+{
+       int val, model;
+
+       /* start conversion if necessary */
+       val = i2c_smbus_read_byte_data(client, LM95234_REG_CONFIG);
+       if (val < 0)
+               return val;
+       if (val & 0x40)
+               i2c_smbus_write_byte_data(client, LM95234_REG_CONFIG,
+                                         val & ~0x40);
+
+       /* If diode type status reports an error, try to fix it */
+       val = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL_STS);
+       if (val < 0)
+               return val;
+       model = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL);
+       if (model < 0)
+               return model;
+       if (model & val) {
+               dev_notice(&client->dev,
+                          "Fixing remote diode type misconfiguration (0x%x)\n",
+                          val);
+               i2c_smbus_write_byte_data(client, LM95234_REG_REM_MODEL,
+                                         model & ~val);
+       }
+       return 0;
+}
+
+static int lm95234_probe(struct i2c_client *client,
+                        const struct i2c_device_id *id)
+{
+       struct device *dev = &client->dev;
+       struct lm95234_data *data;
+       int err;
+
+       data = devm_kzalloc(dev, sizeof(struct lm95234_data), GFP_KERNEL);
+       if (!data)
+               return -ENOMEM;
+
+       i2c_set_clientdata(client, data);
+       mutex_init(&data->update_lock);
+
+       /* Initialize the LM95234 chip */
+       err = lm95234_init_client(client);
+       if (err < 0)
+               return err;
+
+       /* Register sysfs hooks */
+       err = sysfs_create_group(&dev->kobj, &lm95234_group);
+       if (err)
+               return err;
+
+       data->hwmon_dev = hwmon_device_register(dev);
+       if (IS_ERR(data->hwmon_dev)) {
+               err = PTR_ERR(data->hwmon_dev);
+               goto exit_remove_files;
+       }
+
+       return 0;
+
+exit_remove_files:
+       sysfs_remove_group(&dev->kobj, &lm95234_group);
+       return err;
+}
+
+static int lm95234_remove(struct i2c_client *client)
+{
+       struct lm95234_data *data = i2c_get_clientdata(client);
+
+       hwmon_device_unregister(data->hwmon_dev);
+       sysfs_remove_group(&client->dev.kobj, &lm95234_group);
+
+       return 0;
+}
+
+/* Driver data (common to all clients) */
+static const struct i2c_device_id lm95234_id[] = {
+       { "lm95234", 0 },
+       { }
+};
+MODULE_DEVICE_TABLE(i2c, lm95234_id);
+
+static struct i2c_driver lm95234_driver = {
+       .class          = I2C_CLASS_HWMON,
+       .driver = {
+               .name   = DRVNAME,
+       },
+       .probe          = lm95234_probe,
+       .remove         = lm95234_remove,
+       .id_table       = lm95234_id,
+       .detect         = lm95234_detect,
+       .address_list   = normal_i2c,
+};
+
+module_i2c_driver(lm95234_driver);
+
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
+MODULE_DESCRIPTION("LM95234 sensor driver");
+MODULE_LICENSE("GPL");