def_bool y
depends on SMP
-config X86_TRAMPOLINE
- def_bool y
- depends on SMP || (64BIT && ACPI_SLEEP)
-
config X86_32_LAZY_GS
def_bool y
depends on X86_32 && !CC_STACKPROTECTOR
obj-y += pci-iommu_table.o
obj-y += resource.o
-obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o
+obj-y += trampoline.o trampoline_$(BITS).o
obj-y += process.o
obj-y += i387.o xsave.o
obj-y += ptrace.o
obj-$(CONFIG_SMP) += smpboot.o tsc_sync.o
obj-$(CONFIG_SMP) += setup_percpu.o
obj-$(CONFIG_X86_64_SMP) += tsc_sync.o
-obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_$(BITS).o
obj-$(CONFIG_X86_MPPARSE) += mpparse.o
obj-y += apic/
obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o
{
memblock_init();
-#ifdef CONFIG_X86_TRAMPOLINE
- /*
- * But first pinch a few for the stack/trampoline stuff
- * FIXME: Don't need the extra page at 4K, but need to fix
- * trampoline before removing it. (see the GDT stuff)
- */
- memblock_x86_reserve_range(PAGE_SIZE, PAGE_SIZE + PAGE_SIZE, "EX TRAMPOLINE");
-#endif
-
memblock_x86_reserve_range(__pa_symbol(&_text), __pa_symbol(&__bss_stop), "TEXT DATA BSS");
#ifdef CONFIG_BLK_DEV_INITRD
/* Fixup phys_base */
addq %rbp, phys_base(%rip)
-#ifdef CONFIG_X86_TRAMPOLINE
+ /* Fixup trampoline */
addq %rbp, trampoline_level4_pgt + 0(%rip)
addq %rbp, trampoline_level4_pgt + (511*8)(%rip)
-#endif
/* Due to ENTRY(), sometimes the empty space gets filled with
* zeros. Better take a jmp than relying on empty space being
printk(KERN_DEBUG "initial memory mapped : 0 - %08lx\n",
max_pfn_mapped<<PAGE_SHIFT);
- reserve_trampoline_memory();
+ setup_trampolines();
#ifdef CONFIG_ACPI_SLEEP
/*
stack_start = c_idle.idle->thread.sp;
/* start_ip had better be page-aligned! */
- start_ip = setup_trampoline();
+ start_ip = trampoline_address();
/* So we see what's up */
announce_cpu(cpu, apicid);
* the targeted processor.
*/
+ printk(KERN_DEBUG "smpboot cpu %d: start_ip = %lx\n", cpu, start_ip);
+
atomic_set(&init_deasserted, 0);
if (get_uv_system_type() != UV_NON_UNIQUE_APIC) {
pr_debug("CPU%d: has booted.\n", cpu);
else {
boot_error = 1;
- if (*((volatile unsigned char *)trampoline_base)
- == 0xA5)
+ if (*(volatile u32 *)TRAMPOLINE_SYM(trampoline_status)
+ == 0xA5A5A5A5)
/* trampoline started but...? */
pr_err("CPU%d: Stuck ??\n", cpu);
else
}
/* mark "stuck" area as not stuck */
- *((volatile unsigned long *)trampoline_base) = 0;
+ *(volatile u32 *)TRAMPOLINE_SYM(trampoline_status) = 0;
if (get_uv_system_type() != UV_NON_UNIQUE_APIC) {
/*
#include <linux/memblock.h>
#include <asm/trampoline.h>
+#include <asm/cacheflush.h>
#include <asm/pgtable.h>
-#if defined(CONFIG_X86_64) && defined(CONFIG_ACPI_SLEEP)
-#define __trampinit
-#define __trampinitdata
-#else
-#define __trampinit __cpuinit
-#define __trampinitdata __cpuinitdata
-#endif
+unsigned char *x86_trampoline_base;
-/* ready for x86_64 and x86 */
-unsigned char *__trampinitdata trampoline_base;
-
-void __init reserve_trampoline_memory(void)
+void __init setup_trampolines(void)
{
phys_addr_t mem;
+ size_t size = PAGE_ALIGN(x86_trampoline_end - x86_trampoline_start);
/* Has to be in very low memory so we can execute real-mode AP code. */
- mem = memblock_find_in_range(0, 1<<20, TRAMPOLINE_SIZE, PAGE_SIZE);
+ mem = memblock_find_in_range(0, 1<<20, size, PAGE_SIZE);
if (mem == MEMBLOCK_ERROR)
panic("Cannot allocate trampoline\n");
- trampoline_base = __va(mem);
- memblock_x86_reserve_range(mem, mem + TRAMPOLINE_SIZE, "TRAMPOLINE");
+ x86_trampoline_base = __va(mem);
+ memblock_x86_reserve_range(mem, mem + size, "TRAMPOLINE");
+
+ printk(KERN_DEBUG "Base memory trampoline at [%p] %llx size %zu\n",
+ x86_trampoline_base, (unsigned long long)mem, size);
+
+ memcpy(x86_trampoline_base, x86_trampoline_start, size);
}
/*
- * Currently trivial. Write the real->protected mode
- * bootstrap into the page concerned. The caller
- * has made sure it's suitably aligned.
+ * setup_trampolines() gets called very early, to guarantee the
+ * availability of low memory. This is before the proper kernel page
+ * tables are set up, so we cannot set page permissions in that
+ * function. Thus, we use an arch_initcall instead.
*/
-unsigned long __trampinit setup_trampoline(void)
+static int __init configure_trampolines(void)
{
- memcpy(trampoline_base, trampoline_data, TRAMPOLINE_SIZE);
- return virt_to_phys(trampoline_base);
+ size_t size = PAGE_ALIGN(x86_trampoline_end - x86_trampoline_start);
+
+ set_memory_x((unsigned long)x86_trampoline_base, size >> PAGE_SHIFT);
+ return 0;
}
+arch_initcall(configure_trampolines);
#include <asm/segment.h>
#include <asm/page_types.h>
-/* We can free up trampoline after bootup if cpu hotplug is not supported. */
-__CPUINITRODATA
-.code16
+#ifdef CONFIG_SMP
+
+ .section ".x86_trampoline","a"
+ .balign PAGE_SIZE
+ .code16
ENTRY(trampoline_data)
r_base = .
cli # We should be safe anyway
- movl $0xA5A5A5A5, trampoline_data - r_base
+ movl $0xA5A5A5A5, trampoline_status - r_base
# write marker for master knows we're running
/* GDT tables in non default location kernel can be beyond 16MB and
.word 0 # idt limit = 0
.long 0 # idt base = 0L
+ENTRY(trampoline_status)
+ .long 0
+
.globl trampoline_end
trampoline_end:
+
+#endif /* CONFIG_SMP */
#include <asm/segment.h>
#include <asm/processor-flags.h>
-#ifdef CONFIG_ACPI_SLEEP
-.section .rodata, "a", @progbits
-#else
-/* We can free up the trampoline after bootup if cpu hotplug is not supported. */
-__CPUINITRODATA
-#endif
-.code16
+ .section ".x86_trampoline","a"
+ .balign PAGE_SIZE
+ .code16
ENTRY(trampoline_data)
r_base = .
mov %ax, %ss
- movl $0xA5A5A5A5, trampoline_data - r_base
+ movl $0xA5A5A5A5, trampoline_status - r_base
# write marker for master knows we're running
# Setup stack
movzx %ax, %esi # Find the 32bit trampoline location
shll $4, %esi
- # Fixup the vectors
- addl %esi, startup_32_vector - r_base
- addl %esi, startup_64_vector - r_base
- addl %esi, tgdt + 2 - r_base # Fixup the gdt pointer
+ # Fixup the absolute vectors
+ leal (startup_32 - r_base)(%esi), %eax
+ movl %eax, startup_32_vector - r_base
+ leal (startup_64 - r_base)(%esi), %eax
+ movl %eax, startup_64_vector - r_base
+ leal (tgdt - r_base)(%esi), %eax
+ movl %eax, (tgdt + 2 - r_base)
/*
* GDT tables in non default location kernel can be beyond 16MB and
jmp no_longmode
#include "verify_cpu.S"
+ .balign 4
# Careful these need to be in the same 64K segment as the above;
tidt:
.word 0 # idt limit = 0
.long startup_64 - r_base
.word __KERNEL_CS, 0
+ .balign 4
+fixup_base:
+ .long 0
+ENTRY(trampoline_status)
+ .long 0
+
trampoline_stack:
.org 0x1000
trampoline_stack_end:
INIT_DATA_SECTION(16)
+ /*
+ * Code and data for a variety of lowlevel trampolines, to be
+ * copied into base memory (< 1 MiB) during initialization.
+ * Since it is copied early, the main copy can be discarded
+ * afterwards.
+ */
+ .x86_trampoline : AT(ADDR(.x86_trampoline) - LOAD_OFFSET) {
+ x86_trampoline_start = .;
+ *(.x86_trampoline)
+ x86_trampoline_end = .;
+ }
+
.x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
__x86_cpu_dev_start = .;
*(.x86_cpu_dev.init)
*(.iommu_table)
__iommu_table_end = .;
}
+
. = ALIGN(8);
/*
* .exit.text is discard at runtime, not link time, to deal with
projects / mv-sheeva.git / commitdiff