ENGR00163615 mx6q: sabrelite RevC: change GPIO for flexcan

GPIOs used by flexcan are changed on RevC board.
Updating the code for RevC board.

Signed-off-by: Dong Aisheng <b29396@freescale.com>

diff --git a/arch/arm/mach-mx6/board-mx6q_sabrelite.c b/arch/arm/mach-mx6/board-mx6q_sabrelite.c
index 589a57b1a3ed89d5eae3f6d6507a20b9b4245563..118b6e0538d0489112607a64e140c15a38a347d3 100644 (file)
--- a/arch/arm/mach-mx6/board-mx6q_sabrelite.c
+++ b/arch/arm/mach-mx6/board-mx6q_sabrelite.c
@@ -80,8 +80,8 @@
 #define MX6Q_SABRELITE_USB_OTG_PWR     IMX_GPIO_NR(3, 22)
 #define MX6Q_SABRELITE_CAP_TCH_INT1    IMX_GPIO_NR(1, 9)
 #define MX6Q_SABRELITE_USB_HUB_RESET   IMX_GPIO_NR(7, 12)
-#define MX6Q_SABRELITE_CAN1_STBY       IMX_GPIO_NR(1, 25)
-#define MX6Q_SABRELITE_CAN1_EN         IMX_GPIO_NR(1, 27)
+#define MX6Q_SABRELITE_CAN1_STBY       IMX_GPIO_NR(1, 2)
+#define MX6Q_SABRELITE_CAN1_EN         IMX_GPIO_NR(1, 4)
 
 #define MX6Q_SABRELITE_SD3_WP_PADCFG   (PAD_CTL_PKE | PAD_CTL_PUE |    \
                PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_MED |        \
@@ -106,9 +106,9 @@ static iomux_v3_cfg_t mx6q_sabrelite_pads[] = {
        /* CAN1  */
        MX6Q_PAD_KEY_ROW2__CAN1_RXCAN,
        MX6Q_PAD_KEY_COL2__CAN1_TXCAN,
-       MX6Q_PAD_ENET_CRS_DV__GPIO_1_25,        /* STNDBY */
-       MX6Q_PAD_ENET_RXD1__GPIO_1_26,          /* NERR */
-       MX6Q_PAD_ENET_RXD0__GPIO_1_27,          /* Enable */
+       MX6Q_PAD_GPIO_2__GPIO_1_2,              /* STNDBY */
+       MX6Q_PAD_GPIO_7__GPIO_1_7,              /* NERR */
+       MX6Q_PAD_GPIO_4__GPIO_1_4,              /* Enable */
 
        /* CCM  */
        MX6Q_PAD_GPIO_0__CCM_CLKO,              /* SGTL500 sys_mclk */