]> git.karo-electronics.de Git - linux-beck.git/commitdiff
wireless/prism54: remove trailing space in messages
authorFrans Pop <elendil@planet.nl>
Wed, 24 Mar 2010 18:46:33 +0000 (19:46 +0100)
committerJohn W. Linville <linville@tuxdriver.com>
Wed, 31 Mar 2010 18:39:07 +0000 (14:39 -0400)
Signed-off-by: Frans Pop <elendil@planet.nl>
Cc: Luis R. Rodriguez <mcgrof@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/p54/txrx.c
drivers/net/wireless/prism54/islpci_dev.c
drivers/net/wireless/prism54/islpci_eth.c
drivers/net/wireless/prism54/islpci_mgt.c
drivers/net/wireless/prism54/oid_mgt.c

index 66057999a93ce03f8a917280eb0857c49d00ae0b..2ceff5480355aa3c351ba328ecc7ce55b2071d15 100644 (file)
@@ -38,7 +38,7 @@ static void p54_dump_tx_queue(struct p54_common *priv)
        u32 largest_hole = 0, free;
 
        spin_lock_irqsave(&priv->tx_queue.lock, flags);
-       printk(KERN_DEBUG "%s: / --- tx queue dump (%d entries) --- \n",
+       printk(KERN_DEBUG "%s: / --- tx queue dump (%d entries) ---\n",
               wiphy_name(priv->hw->wiphy), skb_queue_len(&priv->tx_queue));
 
        prev_addr = priv->rx_start;
index a3ba3539db027df101ce154d986ff1645be71fee..7c82e432cca7383f7c2821a26c7f6fd7c6809c5b 100644 (file)
@@ -227,14 +227,14 @@ islpci_interrupt(int irq, void *config)
 
 #if VERBOSE > SHOW_ERROR_MESSAGES
                DEBUG(SHOW_FUNCTION_CALLS,
-                     "IRQ: Identification register 0x%p 0x%x \n", device, reg);
+                     "IRQ: Identification register 0x%p 0x%x\n", device, reg);
 #endif
 
                /* check for each bit in the register separately */
                if (reg & ISL38XX_INT_IDENT_UPDATE) {
 #if VERBOSE > SHOW_ERROR_MESSAGES
                        /* Queue has been updated */
-                       DEBUG(SHOW_TRACING, "IRQ: Update flag \n");
+                       DEBUG(SHOW_TRACING, "IRQ: Update flag\n");
 
                        DEBUG(SHOW_QUEUE_INDEXES,
                              "CB drv Qs: [%i][%i][%i][%i][%i][%i]\n",
@@ -300,7 +300,7 @@ islpci_interrupt(int irq, void *config)
                                                ISL38XX_CB_RX_DATA_LQ) != 0) {
 #if VERBOSE > SHOW_ERROR_MESSAGES
                                DEBUG(SHOW_TRACING,
-                                     "Received frame in Data Low Queue \n");
+                                     "Received frame in Data Low Queue\n");
 #endif
                                islpci_eth_receive(priv);
                        }
@@ -325,7 +325,7 @@ islpci_interrupt(int irq, void *config)
                        /* Device has been initialized */
 #if VERBOSE > SHOW_ERROR_MESSAGES
                        DEBUG(SHOW_TRACING,
-                             "IRQ: Init flag, device initialized \n");
+                             "IRQ: Init flag, device initialized\n");
 #endif
                        wake_up(&priv->reset_done);
                }
@@ -333,7 +333,7 @@ islpci_interrupt(int irq, void *config)
                if (reg & ISL38XX_INT_IDENT_SLEEP) {
                        /* Device intends to move to powersave state */
 #if VERBOSE > SHOW_ERROR_MESSAGES
-                       DEBUG(SHOW_TRACING, "IRQ: Sleep flag \n");
+                       DEBUG(SHOW_TRACING, "IRQ: Sleep flag\n");
 #endif
                        isl38xx_handle_sleep_request(priv->control_block,
                                                     &powerstate,
@@ -343,7 +343,7 @@ islpci_interrupt(int irq, void *config)
                if (reg & ISL38XX_INT_IDENT_WAKEUP) {
                        /* Device has been woken up to active state */
 #if VERBOSE > SHOW_ERROR_MESSAGES
-                       DEBUG(SHOW_TRACING, "IRQ: Wakeup flag \n");
+                       DEBUG(SHOW_TRACING, "IRQ: Wakeup flag\n");
 #endif
 
                        isl38xx_handle_wakeup(priv->control_block,
@@ -634,7 +634,7 @@ islpci_alloc_memory(islpci_private *priv)
              ioremap(pci_resource_start(priv->pdev, 0),
                      ISL38XX_PCI_MEM_SIZE))) {
                /* error in remapping the PCI device memory address range */
-               printk(KERN_ERR "PCI memory remapping failed \n");
+               printk(KERN_ERR "PCI memory remapping failed\n");
                return -1;
        }
 
@@ -901,7 +901,7 @@ islpci_setup(struct pci_dev *pdev)
 
        if (register_netdev(ndev)) {
                DEBUG(SHOW_ERROR_MESSAGES,
-                     "ERROR: register_netdev() failed \n");
+                     "ERROR: register_netdev() failed\n");
                goto do_islpci_free_memory;
        }
 
index 872b64783e780e8bf2e1570348114195457b94d8..af9e7fbd7640aac9b643416c00ef3df0a3e91af4 100644 (file)
@@ -89,7 +89,7 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
        u32 curr_frag;
 
 #if VERBOSE > SHOW_ERROR_MESSAGES
-       DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_transmit \n");
+       DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_transmit\n");
 #endif
 
        /* lock the driver code */
@@ -140,7 +140,7 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
                        }
 
 #if VERBOSE > SHOW_ERROR_MESSAGES
-                       DEBUG(SHOW_TRACING, "memmove %p %p %i \n", skb->data,
+                       DEBUG(SHOW_TRACING, "memmove %p %p %i\n", skb->data,
                              src, skb->len);
 #endif
                } else {
@@ -319,7 +319,7 @@ islpci_eth_receive(islpci_private *priv)
        int discard = 0;
 
 #if VERBOSE > SHOW_ERROR_MESSAGES
-       DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_receive \n");
+       DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_receive\n");
 #endif
 
        /* the device has written an Ethernet frame in the data area
@@ -431,7 +431,7 @@ islpci_eth_receive(islpci_private *priv)
                skb = dev_alloc_skb(MAX_FRAGMENT_SIZE_RX + 2);
                if (unlikely(skb == NULL)) {
                        /* error allocating an sk_buff structure elements */
-                       DEBUG(SHOW_ERROR_MESSAGES, "Error allocating skb \n");
+                       DEBUG(SHOW_ERROR_MESSAGES, "Error allocating skb\n");
                        break;
                }
                skb_reserve(skb, (4 - (long) skb->data) & 0x03);
index 69d2f882fd065e18af75ac62ca88fec3e776ab39..89b0278eb7e8794266ba39b98486ed995f411fe3 100644 (file)
@@ -113,7 +113,7 @@ islpci_mgmt_rx_fill(struct net_device *ndev)
        u32 curr = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_RX_MGMTQ]);
 
 #if VERBOSE > SHOW_ERROR_MESSAGES
-       DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgmt_rx_fill \n");
+       DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgmt_rx_fill\n");
 #endif
 
        while (curr - priv->index_mgmt_rx < ISL38XX_CB_MGMT_QSIZE) {
@@ -211,7 +211,7 @@ islpci_mgt_transmit(struct net_device *ndev, int operation, unsigned long oid,
        {
                pimfor_header_t *h = buf.mem;
                DEBUG(SHOW_PIMFOR_FRAMES,
-                     "PIMFOR: op %i, oid 0x%08lx, device %i, flags 0x%x length 0x%x \n",
+                     "PIMFOR: op %i, oid 0x%08lx, device %i, flags 0x%x length 0x%x\n",
                      h->operation, oid, h->device_id, h->flags, length);
 
                /* display the buffer contents for debugging */
@@ -279,7 +279,7 @@ islpci_mgt_receive(struct net_device *ndev)
        u32 curr_frag;
 
 #if VERBOSE > SHOW_ERROR_MESSAGES
-       DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgt_receive \n");
+       DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgt_receive\n");
 #endif
 
        /* Only once per interrupt, determine fragment range to
@@ -338,7 +338,7 @@ islpci_mgt_receive(struct net_device *ndev)
 
 #if VERBOSE > SHOW_ERROR_MESSAGES
                DEBUG(SHOW_PIMFOR_FRAMES,
-                     "PIMFOR: op %i, oid 0x%08x, device %i, flags 0x%x length 0x%x \n",
+                     "PIMFOR: op %i, oid 0x%08x, device %i, flags 0x%x length 0x%x\n",
                      header->operation, header->oid, header->device_id,
                      header->flags, header->length);
 
index 1187e6112a641ee1de6cbc6c8ac80d1cee4a40d9..07df70a100711505a92ab5129bd08a2376803c59 100644 (file)
@@ -819,7 +819,7 @@ mgt_response_to_str(enum oid_num_t n, union oid_res_t *r, char *str)
                        k = snprintf(str, PRIV_STR_SIZE, "nr=%u\n", list->nr);
                        for (i = 0; i < list->nr; i++)
                                k += snprintf(str + k, PRIV_STR_SIZE - k,
-                                             "bss[%u] : \nage=%u\nchannel=%u\n"
+                                             "bss[%u] :\nage=%u\nchannel=%u\n"
                                              "capinfo=0x%X\nrates=0x%X\n"
                                              "basic_rates=0x%X\n",
                                              i, list->bsslist[i].age,