net: dsa: mv88e6xxx: add helper to disable ports

Before resetting a switch, the ports should be set to the Disabled state
and the transmit queues should be drained.

Add an helper to explicit that.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 7a6c587839146d7cd0c37fb654b5c51bfc8e06c2..7cbaff721318dc151b4cdd79d39895d636b2e207 100644 (file)
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -2356,17 +2356,11 @@ static void mv88e6xxx_port_bridge_leave(struct dsa_switch *ds, int port)
        mutex_unlock(&chip->reg_lock);
 }
 
-static int mv88e6xxx_switch_reset(struct mv88e6xxx_chip *chip)
+static int mv88e6xxx_disable_ports(struct mv88e6xxx_chip *chip)
 {
-       bool ppu_active = mv88e6xxx_has(chip, MV88E6XXX_FLAG_PPU_ACTIVE);
-       u16 is_reset = (ppu_active ? 0x8800 : 0xc800);
-       struct gpio_desc *gpiod = chip->reset;
-       unsigned long timeout;
-       u16 reg;
-       int err;
-       int i;
+       int i, err;
 
-       /* Set all ports to the disabled state. */
+       /* Set all ports to the Disabled state */
        for (i = 0; i < mv88e6xxx_num_ports(chip); i++) {
                err = mv88e6xxx_port_set_state(chip, i,
                                               PORT_CONTROL_STATE_DISABLED);
@@ -2374,9 +2368,27 @@ static int mv88e6xxx_switch_reset(struct mv88e6xxx_chip *chip)
                        return err;
        }
 
-       /* Wait for transmit queues to drain. */
+       /* Wait for transmit queues to drain,
+        * i.e. 2ms for a maximum frame to be transmitted at 10 Mbps.
+        */
        usleep_range(2000, 4000);
 
+       return 0;
+}
+
+static int mv88e6xxx_switch_reset(struct mv88e6xxx_chip *chip)
+{
+       bool ppu_active = mv88e6xxx_has(chip, MV88E6XXX_FLAG_PPU_ACTIVE);
+       u16 is_reset = (ppu_active ? 0x8800 : 0xc800);
+       struct gpio_desc *gpiod = chip->reset;
+       unsigned long timeout;
+       u16 reg;
+       int err;
+
+       err = mv88e6xxx_disable_ports(chip);
+       if (err)
+               return err;
+
        /* If there is a gpio connected to the reset pin, toggle it */
        if (gpiod) {
                gpiod_set_value_cansleep(gpiod, 1);