regmap: irq: clear status when disable irq

clear the status bit if the mask register doesn't prevent
the chip level irq from being asserted

OR in the following sequence, there will be irq storm happens:
1) interrupt is triggered;
2) another thread disables it(the mask bit is set);
3) _Then_ the interrupt thread is not ACKed(the status bit is not cleared),
   and it's ignored;
4) if the irq is still asserted because of the uncleared status bit,
   the irq storm happens;

Signed-off-by: Yi Zhang <yizhang@marvell.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c
index d10456ffd811f5acc7da0dcd23979b1408d736a9..763c60d3d2774aaabedaa8fbdba40f9abf53faff 100644 (file)
--- a/drivers/base/regmap/regmap-irq.c
+++ b/drivers/base/regmap/regmap-irq.c
@@ -105,6 +105,22 @@ static void regmap_irq_sync_unlock(struct irq_data *data)
                                        "Failed to sync wakes in %x: %d\n",
                                        reg, ret);
                }
+
+               if (!d->chip->init_ack_masked)
+                       continue;
+               /*
+                * Ack all the masked interrupts uncondictionly,
+                * OR if there is masked interrupt which hasn't been Acked,
+                * it'll be ignored in irq handler, then may introduce irq storm
+                */
+               if (d->mask_buf[i] && d->chip->ack_base) {
+                       reg = d->chip->ack_base +
+                               (i * map->reg_stride * d->irq_reg_stride);
+                       ret = regmap_write(map, reg, d->mask_buf[i]);
+                       if (ret != 0)
+                               dev_err(d->map->dev, "Failed to ack 0x%x: %d\n",
+                                       reg, ret);
+               }
        }
 
        if (d->chip->runtime_pm)