Sometimes we need to specify non-probably information for sdio devices in the
devicetree, this is done through child nodes addressed by the reg property,
whereby the reg property refers to the sdio function number, see;
Documentation/devicetree/bindings/mmc/mmc.txt
This commit adds the necessary address- and size-cells properties to the mmc
controller nodes in the dtsi files, so that dts files needing such a child
node do not need to specify these themselves.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
"sample";
interrupts = <32>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc1: mmc@01c10000 {
"sample";
interrupts = <33>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc2: mmc@01c11000 {
"sample";
interrupts = <34>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc3: mmc@01c12000 {
"sample";
interrupts = <35>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
usbphy: phy@01c13400 {
"sample";
interrupts = <32>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc1: mmc@01c10000 {
"sample";
interrupts = <33>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc2: mmc@01c11000 {
"sample";
interrupts = <34>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
usbphy: phy@01c13400 {
reset-names = "ahb";
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc1: mmc@01c10000 {
reset-names = "ahb";
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc2: mmc@01c11000 {
reset-names = "ahb";
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc3: mmc@01c12000 {
reset-names = "ahb";
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
usbphy: phy@01c19400 {
"sample";
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc1: mmc@01c10000 {
"sample";
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc2: mmc@01c11000 {
"sample";
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc3: mmc@01c12000 {
"sample";
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
usbphy: phy@01c13400 {
reset-names = "ahb";
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc1: mmc@01c10000 {
reset-names = "ahb";
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc2: mmc@01c11000 {
reset-names = "ahb";
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
pio: pinctrl@01c20800 {
reset-names = "ahb";
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc1: mmc@01c10000 {
reset-names = "ahb";
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc2: mmc@01c11000 {
reset-names = "ahb";
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc3: mmc@01c12000 {
reset-names = "ahb";
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc_config_clk: clk@01c13000 {