obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o
- obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
- obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o
+ obj-$(CONFIG_SOC_IMX1) += clock-imx1.o mm-imx1.o
+ obj-$(CONFIG_SOC_IMX21) += clock-imx21.o mm-imx21.o
- obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o
-obj-$(CONFIG_SOC_IMX25) += clock-imx25.o mm-imx25.o ehci-imx25.o
++obj-$(CONFIG_SOC_IMX25) += clock-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o
- obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o
- obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
+ obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
+ obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
- obj-$(CONFIG_SOC_IMX31) += mm-imx31.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
- obj-$(CONFIG_SOC_IMX35) += mm-imx35.o cpu-imx35.o clock-imx35.o ehci-imx35.o
- obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
+ obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
+ obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o
# Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/leds.h>
- #include <linux/irq.h>
#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
},
};
+static struct i2c_board_info mxs_i2c0_board_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("sgtl5000", 0x0a),
+ },
+};
+
+#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
+static struct regulator_consumer_supply mx28evk_audio_consumer_supplies[] = {
+ REGULATOR_SUPPLY("VDDA", "0-000a"),
+ REGULATOR_SUPPLY("VDDIO", "0-000a"),
+};
+
+static struct regulator_init_data mx28evk_vdd_reg_init_data = {
+ .constraints = {
+ .name = "3V3",
+ .always_on = 1,
+ },
+ .consumer_supplies = mx28evk_audio_consumer_supplies,
+ .num_consumer_supplies = ARRAY_SIZE(mx28evk_audio_consumer_supplies),
+};
+
+static struct fixed_voltage_config mx28evk_vdd_pdata = {
+ .supply_name = "board-3V3",
+ .microvolts = 3300000,
+ .gpio = -EINVAL,
+ .enabled_at_boot = 1,
+ .init_data = &mx28evk_vdd_reg_init_data,
+};
+static struct platform_device mx28evk_voltage_regulator = {
+ .name = "reg-fixed-voltage",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &mx28evk_vdd_pdata,
+ },
+};
+static void __init mx28evk_add_regulators(void)
+{
+ platform_device_register(&mx28evk_voltage_regulator);
+}
+#else
+static void __init mx28evk_add_regulators(void) {}
+#endif
+
+ static struct gpio mx28evk_lcd_gpios[] = {
+ { MX28EVK_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, "lcd-enable" },
+ { MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" },
+ };
+
static void __init mx28evk_init(void)
{
int ret;
mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]);
}
- ret = gpio_request_one(MX28EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable");
- if (ret)
- pr_warn("failed to request gpio lcd-enable: %d\n", ret);
- else
- gpio_set_value(MX28EVK_LCD_ENABLE, 1);
-
- ret = gpio_request_one(MX28EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable");
+ ret = gpio_request_array(mx28evk_lcd_gpios,
+ ARRAY_SIZE(mx28evk_lcd_gpios));
if (ret)
- pr_warn("failed to request gpio bl-enable: %d\n", ret);
+ pr_warn("failed to request gpio pins for lcd: %d\n", ret);
else
- gpio_set_value(MX28EVK_BL_ENABLE, 1);
-
- mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
+ mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
+ mx28_add_saif(0);
+ mx28_add_saif(1);
+
+ mx28_add_mxs_i2c(0);
+ i2c_register_board_info(0, mxs_i2c0_board_info,
+ ARRAY_SIZE(mxs_i2c0_board_info));
+
+ mx28evk_add_regulators();
+
+ mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0,
+ NULL, 0);
+
/* power on mmc slot by writing 0 to the gpio */
ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW,
"mmc0-slot-power");
"mmc1-slot-power");
if (ret)
pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret);
+ else
+ mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
+
+ mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
+ mx28_add_rtc_stmp3xxx();
+
gpio_led_register_device(0, &mx28evk_led_data);
}
extern void mx51_efikamx_reset(void);
extern int mx53_revision(void);
extern int mx53_display_revision(void);
+
+ enum mxc_cpu_pwr_mode {
+ WAIT_CLOCKED, /* wfi only */
+ WAIT_UNCLOCKED, /* WAIT */
+ WAIT_UNCLOCKED_POWER_OFF, /* WAIT + SRPG */
+ STOP_POWER_ON, /* just STOP */
+ STOP_POWER_OFF, /* STOP + SRPG */
+ };
+
+ extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
+ extern void (*imx_idle)(void);
+extern void imx_print_silicon_rev(const char *cpu, int srev);
+
+void avic_handle_irq(struct pt_regs *);
+void tzic_handle_irq(struct pt_regs *);
+
+#define imx1_handle_irq avic_handle_irq
+#define imx21_handle_irq avic_handle_irq
+#define imx25_handle_irq avic_handle_irq
+#define imx27_handle_irq avic_handle_irq
+#define imx31_handle_irq avic_handle_irq
+#define imx35_handle_irq avic_handle_irq
+#define imx50_handle_irq tzic_handle_irq
+#define imx51_handle_irq tzic_handle_irq
+#define imx53_handle_irq tzic_handle_irq
+
#endif
projects / linux-beck.git / commitdiff