phy: rockchip-emmc: Set phyctrl_frqsel based on card clock

The "phyctrl_frqsel" is described in the Arasan datasheet [1] as "the
frequency range of DLL operation".  Although the Rockchip variant of
this PHY has different ranges than the reference Arasan PHY it appears
as if the functionality is similar.  We should set this phyctrl field
properly.

Note: as per Rockchip engineers, apparently the "phyctrl_frqsel" is
actually only useful in HS200 / HS400 modes even though the DLL itself
it used for some purposes in all modes.  See the discussion in the
earlier change in this series: ("mmc: sdhci-of-arasan: Always power the
PHY off/on when clock changes").  In any case, it shouldn't hurt to set
this always.

Note that this change should allow boards to run at HS200 / HS400 speed
modes while running at 100 MHz or 150 MHz.  In fact, running HS400 at
150 MHz (giving 300 MB/s) is the main motivation of this series, since
performance is still good but signal integrity problems are less
prevelant at 150 MHz.

[1]: https://arasan.com/wp-content/media/eMMC-5-1-Total-Solution_Rev-1-3.pdf

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

diff --git a/drivers/phy/phy-rockchip-emmc.c b/drivers/phy/phy-rockchip-emmc.c
index 23fe50864526266d1f08599fa5ffb85a94e8e1d6..9dce958233a0df7a49e786881c50bf89a1269176 100644 (file)
--- a/drivers/phy/phy-rockchip-emmc.c
+++ b/drivers/phy/phy-rockchip-emmc.c
@@ -14,6 +14,7 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
@@ -78,15 +79,53 @@
 struct rockchip_emmc_phy {
        unsigned int    reg_offset;
        struct regmap   *reg_base;
+       struct clk      *emmcclk;
 };
 
-static int rockchip_emmc_phy_power(struct rockchip_emmc_phy *rk_phy,
-                                  bool on_off)
+static int rockchip_emmc_phy_power(struct phy *phy, bool on_off)
 {
+       struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
        unsigned int caldone;
        unsigned int dllrdy;
+       unsigned int freqsel = PHYCTRL_FREQSEL_200M;
        unsigned long timeout;
 
+       if (rk_phy->emmcclk != NULL) {
+               unsigned long rate = clk_get_rate(rk_phy->emmcclk);
+               unsigned long ideal_rate;
+               unsigned long diff;
+
+               switch (rate) {
+               case 0 ... 74999999:
+                       ideal_rate = 50000000;
+                       freqsel = PHYCTRL_FREQSEL_50M;
+                       break;
+               case 75000000 ... 124999999:
+                       ideal_rate = 100000000;
+                       freqsel = PHYCTRL_FREQSEL_100M;
+                       break;
+               case 125000000 ... 174999999:
+                       ideal_rate = 150000000;
+                       freqsel = PHYCTRL_FREQSEL_150M;
+                       break;
+               default:
+                       ideal_rate = 200000000;
+                       break;
+               };
+
+               diff = (rate > ideal_rate) ?
+                       rate - ideal_rate : ideal_rate - rate;
+
+               /*
+                * In order for tuning delays to be accurate we need to be
+                * pretty spot on for the DLL range, so warn if we're too
+                * far off.  Also warn if we're above the 200 MHz max.  Don't
+                * warn for really slow rates since we won't be tuning then.
+                */
+               if ((rate > 50000000 && diff > 15000000) || (rate > 200000000))
+                       dev_warn(&phy->dev, "Unsupported rate: %lu\n", rate);
+       }
+
        /*
         * Keep phyctrl_pdb and phyctrl_endll low to allow
         * initialization of CALIO state M/C DFFs
@@ -132,6 +171,13 @@ static int rockchip_emmc_phy_power(struct rockchip_emmc_phy *rk_phy,
                return -ETIMEDOUT;
        }
 
+       /* Set the frequency of the DLL operation */
+       regmap_write(rk_phy->reg_base,
+                    rk_phy->reg_offset + GRF_EMMCPHY_CON0,
+                    HIWORD_UPDATE(freqsel, PHYCTRL_FREQSEL_MASK,
+                                  PHYCTRL_FREQSEL_SHIFT));
+
+       /* Turn on the DLL */
        regmap_write(rk_phy->reg_base,
                     rk_phy->reg_offset + GRF_EMMCPHY_CON6,
                     HIWORD_UPDATE(PHYCTRL_ENDLL_ENABLE,
@@ -166,25 +212,54 @@ static int rockchip_emmc_phy_power(struct rockchip_emmc_phy *rk_phy,
        return 0;
 }
 
-static int rockchip_emmc_phy_power_off(struct phy *phy)
+static int rockchip_emmc_phy_init(struct phy *phy)
+{
+       struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
+       int ret = 0;
+
+       /*
+        * We purposely get the clock here and not in probe to avoid the
+        * circular dependency problem.  We expect:
+        * - PHY driver to probe
+        * - SDHCI driver to start probe
+        * - SDHCI driver to register it's clock
+        * - SDHCI driver to get the PHY
+        * - SDHCI driver to init the PHY
+        *
+        * The clock is optional, so upon any error we just set to NULL.
+        *
+        * NOTE: we don't do anything special for EPROBE_DEFER here.  Given the
+        * above expected use case, EPROBE_DEFER isn't sensible to expect, so
+        * it's just like any other error.
+        */
+       rk_phy->emmcclk = clk_get(&phy->dev, "emmcclk");
+       if (IS_ERR(rk_phy->emmcclk)) {
+               dev_dbg(&phy->dev, "Error getting emmcclk: %d\n", ret);
+               rk_phy->emmcclk = NULL;
+       }
+
+       return ret;
+}
+
+static int rockchip_emmc_phy_exit(struct phy *phy)
 {
        struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
 
+       clk_put(rk_phy->emmcclk);
+
+       return 0;
+}
+
+static int rockchip_emmc_phy_power_off(struct phy *phy)
+{
        /* Power down emmc phy analog blocks */
-       return rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_OFF);
+       return rockchip_emmc_phy_power(phy, PHYCTRL_PDB_PWR_OFF);
 }
 
 static int rockchip_emmc_phy_power_on(struct phy *phy)
 {
        struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
 
-       /* DLL operation: 200 MHz */
-       regmap_write(rk_phy->reg_base,
-                    rk_phy->reg_offset + GRF_EMMCPHY_CON0,
-                    HIWORD_UPDATE(PHYCTRL_FREQSEL_200M,
-                                  PHYCTRL_FREQSEL_MASK,
-                                  PHYCTRL_FREQSEL_SHIFT));
-
        /* Drive impedance: 50 Ohm */
        regmap_write(rk_phy->reg_base,
                     rk_phy->reg_offset + GRF_EMMCPHY_CON6,
@@ -207,10 +282,12 @@ static int rockchip_emmc_phy_power_on(struct phy *phy)
                                   PHYCTRL_OTAPDLYSEL_SHIFT));
 
        /* Power up emmc phy analog blocks */
-       return rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_ON);
+       return rockchip_emmc_phy_power(phy, PHYCTRL_PDB_PWR_ON);
 }
 
 static const struct phy_ops ops = {
+       .init           = rockchip_emmc_phy_init,
+       .exit           = rockchip_emmc_phy_exit,
        .power_on       = rockchip_emmc_phy_power_on,
        .power_off      = rockchip_emmc_phy_power_off,
        .owner          = THIS_MODULE,