]> git.karo-electronics.de Git - karo-tx-linux.git/commitdiff
MIPS: ralink: add mt7628an support
authorJohn Crispin <blogic@openwrt.org>
Wed, 8 Oct 2014 21:30:24 +0000 (23:30 +0200)
committerRalf Baechle <ralf@linux-mips.org>
Mon, 24 Nov 2014 06:45:24 +0000 (07:45 +0100)
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/8031/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/include/asm/mach-ralink/mt7620.h
arch/mips/ralink/Kconfig
arch/mips/ralink/mt7620.c

index 863aea5dcf0ce9cc6f6efdde33fc521f19bf4486..1976fb815fd10c5275b0e04a1c008812fc847e6c 100644 (file)
 #ifndef _MT7620_REGS_H_
 #define _MT7620_REGS_H_
 
+enum mt762x_soc_type {
+       MT762X_SOC_UNKNOWN = 0,
+       MT762X_SOC_MT7620A,
+       MT762X_SOC_MT7620N,
+       MT762X_SOC_MT7628AN,
+};
+
 #define MT7620_SYSC_BASE               0x10000000
 
 #define SYSC_REG_CHIP_NAME0            0x00
@@ -27,6 +34,7 @@
 
 #define MT7620_CHIP_NAME0              0x3637544d
 #define MT7620_CHIP_NAME1              0x20203032
+#define MT7628_CHIP_NAME1              0x20203832
 
 #define SYSCFG0_XTAL_FREQ_SEL          BIT(6)
 
@@ -71,6 +79,9 @@
 #define SYSCFG0_DRAM_TYPE_DDR1         1
 #define SYSCFG0_DRAM_TYPE_DDR2         2
 
+#define SYSCFG0_DRAM_TYPE_DDR2_MT7628  0
+#define SYSCFG0_DRAM_TYPE_DDR1_MT7628  1
+
 #define MT7620_DRAM_BASE               0x0
 #define MT7620_SDRAM_SIZE_MIN          2
 #define MT7620_SDRAM_SIZE_MAX          64
index 77e8a9620e183023bd67467ee8b8a1e468428220..699b75dafd7af66c442fca8eabbb676336ad73dc 100644 (file)
@@ -26,7 +26,7 @@ choice
                select HW_HAS_PCI
 
        config SOC_MT7620
-               bool "MT7620"
+               bool "MT7620/8"
 
 endchoice
 
index e4b1f8251de1ce3c23d968e2f08debe259b7f3f8..2ea5ff6dc22e6d769cc851347b5c7492535e0596 100644 (file)
@@ -37,6 +37,9 @@
 #define PMU1_CFG               0x8C
 #define DIG_SW_SEL             BIT(25)
 
+/* is this a MT7620 or a MT7628 */
+enum mt762x_soc_type mt762x_soc;
+
 /* does the board have sdram or ddram */
 static int dram_type;
 
@@ -94,6 +97,136 @@ static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
        { 0 }
 };
 
+static struct rt2880_pmx_func pwm1_grp_mt7628[] = {
+       FUNC("sdcx", 3, 19, 1),
+       FUNC("utif", 2, 19, 1),
+       FUNC("gpio", 1, 19, 1),
+       FUNC("pwm", 0, 19, 1),
+};
+
+static struct rt2880_pmx_func pwm0_grp_mt7628[] = {
+       FUNC("sdcx", 3, 18, 1),
+       FUNC("utif", 2, 18, 1),
+       FUNC("gpio", 1, 18, 1),
+       FUNC("pwm", 0, 18, 1),
+};
+
+static struct rt2880_pmx_func uart2_grp_mt7628[] = {
+       FUNC("sdcx", 3, 20, 2),
+       FUNC("pwm", 2, 20, 2),
+       FUNC("gpio", 1, 20, 2),
+       FUNC("uart", 0, 20, 2),
+};
+
+static struct rt2880_pmx_func uart1_grp_mt7628[] = {
+       FUNC("sdcx", 3, 45, 2),
+       FUNC("pwm", 2, 45, 2),
+       FUNC("gpio", 1, 45, 2),
+       FUNC("uart", 0, 45, 2),
+};
+
+static struct rt2880_pmx_func i2c_grp_mt7628[] = {
+       FUNC("-", 3, 4, 2),
+       FUNC("debug", 2, 4, 2),
+       FUNC("gpio", 1, 4, 2),
+       FUNC("i2c", 0, 4, 2),
+};
+
+static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 36, 1) };
+static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 37, 1) };
+static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 15, 38) };
+static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) };
+
+static struct rt2880_pmx_func sd_mode_grp_mt7628[] = {
+       FUNC("jtag", 3, 22, 8),
+       FUNC("utif", 2, 22, 8),
+       FUNC("gpio", 1, 22, 8),
+       FUNC("sdcx", 0, 22, 8),
+};
+
+static struct rt2880_pmx_func uart0_grp_mt7628[] = {
+       FUNC("-", 3, 12, 2),
+       FUNC("-", 2, 12, 2),
+       FUNC("gpio", 1, 12, 2),
+       FUNC("uart", 0, 12, 2),
+};
+
+static struct rt2880_pmx_func i2s_grp_mt7628[] = {
+       FUNC("antenna", 3, 0, 4),
+       FUNC("pcm", 2, 0, 4),
+       FUNC("gpio", 1, 0, 4),
+       FUNC("i2s", 0, 0, 4),
+};
+
+static struct rt2880_pmx_func spi_cs1_grp_mt7628[] = {
+       FUNC("-", 3, 6, 1),
+       FUNC("refclk", 2, 6, 1),
+       FUNC("gpio", 1, 6, 1),
+       FUNC("spi", 0, 6, 1),
+};
+
+static struct rt2880_pmx_func spis_grp_mt7628[] = {
+       FUNC("pwm", 3, 14, 4),
+       FUNC("util", 2, 14, 4),
+       FUNC("gpio", 1, 14, 4),
+       FUNC("spis", 0, 14, 4),
+};
+
+static struct rt2880_pmx_func gpio_grp_mt7628[] = {
+       FUNC("pcie", 3, 11, 1),
+       FUNC("refclk", 2, 11, 1),
+       FUNC("gpio", 1, 11, 1),
+       FUNC("gpio", 0, 11, 1),
+};
+
+#define MT7628_GPIO_MODE_MASK  0x3
+
+#define MT7628_GPIO_MODE_PWM1  30
+#define MT7628_GPIO_MODE_PWM0  28
+#define MT7628_GPIO_MODE_UART2 26
+#define MT7628_GPIO_MODE_UART1 24
+#define MT7628_GPIO_MODE_I2C   20
+#define MT7628_GPIO_MODE_REFCLK        18
+#define MT7628_GPIO_MODE_PERST 16
+#define MT7628_GPIO_MODE_WDT   14
+#define MT7628_GPIO_MODE_SPI   12
+#define MT7628_GPIO_MODE_SDMODE        10
+#define MT7628_GPIO_MODE_UART0 8
+#define MT7628_GPIO_MODE_I2S   6
+#define MT7628_GPIO_MODE_CS1   4
+#define MT7628_GPIO_MODE_SPIS  2
+#define MT7628_GPIO_MODE_GPIO  0
+
+static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
+       GRP_G("pmw1", pwm1_grp_mt7628, MT7628_GPIO_MODE_MASK,
+                               1, MT7628_GPIO_MODE_PWM1),
+       GRP_G("pmw1", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK,
+                               1, MT7628_GPIO_MODE_PWM0),
+       GRP_G("uart2", uart2_grp_mt7628, MT7628_GPIO_MODE_MASK,
+                               1, MT7628_GPIO_MODE_UART2),
+       GRP_G("uart1", uart1_grp_mt7628, MT7628_GPIO_MODE_MASK,
+                               1, MT7628_GPIO_MODE_UART1),
+       GRP_G("i2c", i2c_grp_mt7628, MT7628_GPIO_MODE_MASK,
+                               1, MT7628_GPIO_MODE_I2C),
+       GRP("refclk", refclk_grp_mt7628, 1, MT7628_GPIO_MODE_REFCLK),
+       GRP("perst", perst_grp_mt7628, 1, MT7628_GPIO_MODE_PERST),
+       GRP("wdt", wdt_grp_mt7628, 1, MT7628_GPIO_MODE_WDT),
+       GRP("spi", spi_grp_mt7628, 1, MT7628_GPIO_MODE_SPI),
+       GRP_G("sdmode", sd_mode_grp_mt7628, MT7628_GPIO_MODE_MASK,
+                               1, MT7628_GPIO_MODE_SDMODE),
+       GRP_G("uart0", uart0_grp_mt7628, MT7628_GPIO_MODE_MASK,
+                               1, MT7628_GPIO_MODE_UART0),
+       GRP_G("i2s", i2s_grp_mt7628, MT7628_GPIO_MODE_MASK,
+                               1, MT7628_GPIO_MODE_I2S),
+       GRP_G("spi cs1", spi_cs1_grp_mt7628, MT7628_GPIO_MODE_MASK,
+                               1, MT7628_GPIO_MODE_CS1),
+       GRP_G("spis", spis_grp_mt7628, MT7628_GPIO_MODE_MASK,
+                               1, MT7628_GPIO_MODE_SPIS),
+       GRP_G("gpio", gpio_grp_mt7628, MT7628_GPIO_MODE_MASK,
+                               1, MT7628_GPIO_MODE_GPIO),
+       { 0 }
+};
+
 static __init u32
 mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div)
 {
@@ -244,29 +377,42 @@ void __init ralink_clk_init(void)
 
        xtal_rate = mt7620_get_xtal_rate();
 
-       cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate);
-       pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate);
-
-       cpu_rate = mt7620_get_cpu_rate(pll_rate);
-       dram_rate = mt7620_get_dram_rate(pll_rate);
-       sys_rate = mt7620_get_sys_rate(cpu_rate);
-       periph_rate = mt7620_get_periph_rate(xtal_rate);
-
 #define RFMT(label)    label ":%lu.%03luMHz "
 #define RINT(x)                ((x) / 1000000)
 #define RFRAC(x)       (((x) / 1000) % 1000)
 
-       pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"),
-                RINT(xtal_rate), RFRAC(xtal_rate),
-                RINT(cpu_pll_rate), RFRAC(cpu_pll_rate),
-                RINT(pll_rate), RFRAC(pll_rate));
+       if (mt762x_soc == MT762X_SOC_MT7628AN) {
+               if (xtal_rate == MHZ(40))
+                       cpu_rate = MHZ(580);
+               else
+                       cpu_rate = MHZ(575);
+               dram_rate = sys_rate = cpu_rate / 3;
+               periph_rate = MHZ(40);
+
+               ralink_clk_add("10000d00.uartlite", periph_rate);
+               ralink_clk_add("10000e00.uartlite", periph_rate);
+       } else {
+               cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate);
+               pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate);
+
+               cpu_rate = mt7620_get_cpu_rate(pll_rate);
+               dram_rate = mt7620_get_dram_rate(pll_rate);
+               sys_rate = mt7620_get_sys_rate(cpu_rate);
+               periph_rate = mt7620_get_periph_rate(xtal_rate);
+
+               pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"),
+                        RINT(xtal_rate), RFRAC(xtal_rate),
+                        RINT(cpu_pll_rate), RFRAC(cpu_pll_rate),
+                        RINT(pll_rate), RFRAC(pll_rate));
+
+               ralink_clk_add("10000500.uart", periph_rate);
+       }
 
        pr_debug(RFMT("CPU") RFMT("DRAM") RFMT("SYS") RFMT("PERIPH"),
                 RINT(cpu_rate), RFRAC(cpu_rate),
                 RINT(dram_rate), RFRAC(dram_rate),
                 RINT(sys_rate), RFRAC(sys_rate),
                 RINT(periph_rate), RFRAC(periph_rate));
-
 #undef RFRAC
 #undef RINT
 #undef RFMT
@@ -274,7 +420,6 @@ void __init ralink_clk_init(void)
        ralink_clk_add("cpu", cpu_rate);
        ralink_clk_add("10000100.timer", periph_rate);
        ralink_clk_add("10000120.watchdog", periph_rate);
-       ralink_clk_add("10000500.uart", periph_rate);
        ralink_clk_add("10000b00.spi", sys_rate);
        ralink_clk_add("10000c00.uartlite", periph_rate);
        ralink_clk_add("10180000.wmac", xtal_rate);
@@ -289,6 +434,52 @@ void __init ralink_of_remap(void)
                panic("Failed to remap core resources");
 }
 
+static __init void
+mt7620_dram_init(struct ralink_soc_info *soc_info)
+{
+       switch (dram_type) {
+       case SYSCFG0_DRAM_TYPE_SDRAM:
+               pr_info("Board has SDRAM\n");
+               soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN;
+               soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX;
+               break;
+
+       case SYSCFG0_DRAM_TYPE_DDR1:
+               pr_info("Board has DDR1\n");
+               soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
+               soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
+               break;
+
+       case SYSCFG0_DRAM_TYPE_DDR2:
+               pr_info("Board has DDR2\n");
+               soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
+               soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
+               break;
+       default:
+               BUG();
+       }
+}
+
+static __init void
+mt7628_dram_init(struct ralink_soc_info *soc_info)
+{
+       switch (dram_type) {
+       case SYSCFG0_DRAM_TYPE_DDR1_MT7628:
+               pr_info("Board has DDR1\n");
+               soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
+               soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
+               break;
+
+       case SYSCFG0_DRAM_TYPE_DDR2_MT7628:
+               pr_info("Board has DDR2\n");
+               soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
+               soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
+               break;
+       default:
+               BUG();
+       }
+}
+
 void prom_soc_init(struct ralink_soc_info *soc_info)
 {
        void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE);
@@ -306,18 +497,25 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
        rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
        bga = (rev >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK;
 
-       if (n0 != MT7620_CHIP_NAME0 || n1 != MT7620_CHIP_NAME1)
-               panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
-
-       if (bga) {
-               name = "MT7620A";
-               soc_info->compatible = "ralink,mt7620a-soc";
-       } else {
-               name = "MT7620N";
-               soc_info->compatible = "ralink,mt7620n-soc";
+       if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) {
+               if (bga) {
+                       mt762x_soc = MT762X_SOC_MT7620A;
+                       name = "MT7620A";
+                       soc_info->compatible = "ralink,mt7620a-soc";
+               } else {
+                       mt762x_soc = MT762X_SOC_MT7620N;
+                       name = "MT7620N";
+                       soc_info->compatible = "ralink,mt7620n-soc";
 #ifdef CONFIG_PCI
-               panic("mt7620n is only supported for non pci kernels");
+                       panic("mt7620n is only supported for non pci kernels");
 #endif
+               }
+       } else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) {
+               mt762x_soc = MT762X_SOC_MT7628AN;
+               name = "MT7628AN";
+               soc_info->compatible = "ralink,mt7628an-soc";
+       } else {
+               panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
        }
 
        snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
@@ -329,28 +527,11 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
        cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
        dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
 
-       switch (dram_type) {
-       case SYSCFG0_DRAM_TYPE_SDRAM:
-               pr_info("Board has SDRAM\n");
-               soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN;
-               soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX;
-               break;
-
-       case SYSCFG0_DRAM_TYPE_DDR1:
-               pr_info("Board has DDR1\n");
-               soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
-               soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
-               break;
-
-       case SYSCFG0_DRAM_TYPE_DDR2:
-               pr_info("Board has DDR2\n");
-               soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
-               soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
-               break;
-       default:
-               BUG();
-       }
        soc_info->mem_base = MT7620_DRAM_BASE;
+       if (mt762x_soc == MT762X_SOC_MT7628AN)
+               mt7628_dram_init(soc_info);
+       else
+               mt7620_dram_init(soc_info);
 
        pmu0 = __raw_readl(sysc + PMU0_CFG);
        pmu1 = __raw_readl(sysc + PMU1_CFG);
@@ -359,4 +540,9 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
                (pmu0 & PMU_SW_SET) ? ("sw") : ("hw"));
        pr_info("Digital PMU set to %s control\n",
                (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
+
+       if (mt762x_soc == MT762X_SOC_MT7628AN)
+               rt2880_pinmux_data = mt7628an_pinmux_data;
+       else
+               rt2880_pinmux_data = mt7620a_pinmux_data;
 }