ETHERTEAM 16I DRIVER
M: Mika Kuoppala <miku@iki.fi>
S: Maintained
-F: drivers/net/eth16i.c
+F: drivers/net/ethernet/fujitsu/eth16i.c
EXT2 FILE SYSTEM
M: Jan Kara <jack@suse.cz>
To compile this driver as a module, choose M here: the module
will be called dnet.
-config AT1700
- tristate "AT1700/1720 support (EXPERIMENTAL)"
- depends on (ISA || MCA_LEGACY) && EXPERIMENTAL
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called at1700.
-
config HP100
tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
depends on ISA || EISA || PCI
To compile this driver as a module, choose M here. The module
will be called hp100.
-config NET_ISA
- bool "Other ISA cards"
- depends on ISA
- ---help---
- If your network (Ethernet) card hasn't been mentioned yet and its
- bus system (that's the way the cards talks to the other components
- of your computer) is ISA (as opposed to EISA, VLB or PCI), say Y.
- Make sure you know the name of your card. Read the Ethernet-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- If unsure, say Y.
-
- Note that the answer to this question doesn't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the remaining ISA network card questions. If you say Y, you will be
- asked for your specific card in the following questions.
-
-config ETH16I
- tristate "ICL EtherTeam 16i/32 support"
- depends on NET_ISA
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called eth16i.
-
config NET_PCI
bool "EISA, VLB, PCI and on board controllers"
depends on ISA || EISA || PCI
obj-$(CONFIG_MACVLAN) += macvlan.o
obj-$(CONFIG_MACVTAP) += macvtap.o
obj-$(CONFIG_DEFXX) += defxx.o
-obj-$(CONFIG_AT1700) += at1700.o
obj-$(CONFIG_CPMAC) += cpmac.o
-
-obj-$(CONFIG_ETH16I) += eth16i.o
obj-$(CONFIG_EQUALIZER) += eql.o
obj-$(CONFIG_KORINA) += korina.o
obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
source "drivers/net/ethernet/emulex/Kconfig"
source "drivers/net/ethernet/neterion/Kconfig"
source "drivers/net/ethernet/faraday/Kconfig"
+source "drivers/net/ethernet/fujitsu/Kconfig"
source "drivers/net/ethernet/ibm/Kconfig"
source "drivers/net/ethernet/intel/Kconfig"
source "drivers/net/ethernet/i825xx/Kconfig"
obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/
obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/
obj-$(CONFIG_NET_VENDOR_FARADAY) += faraday/
+obj-$(CONFIG_NET_VENDOR_FUJITSU) += fujitsu/
obj-$(CONFIG_NET_VENDOR_IBM) += ibm/
obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
--- /dev/null
+#
+# Fujitsu Network device configuration
+#
+
+config NET_VENDOR_FUJITSU
+ bool "Fujitsu devices"
+ depends on ISA || PCMCIA || ((ISA || MCA_LEGACY) && EXPERIMENTAL)
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ the questions about Fujitsu cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_FUJITSU
+
+config AT1700
+ tristate "AT1700/1720 support (EXPERIMENTAL)"
+ depends on (ISA || MCA_LEGACY) && EXPERIMENTAL
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called at1700.
+
+config PCMCIA_FMVJ18X
+ tristate "Fujitsu FMV-J18x PCMCIA support"
+ depends on PCMCIA
+ select CRC32
+ ---help---
+ Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
+ PCMCIA (PC-card) Ethernet card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called fmvj18x_cs. If unsure, say N.
+
+config ETH16I
+ tristate "ICL EtherTeam 16i/32 support"
+ depends on ISA
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called eth16i.
+
+endif # NET_VENDOR_FUJITSU
--- /dev/null
+#
+# Makefile for the Fujitsu network device drivers.
+#
+
+obj-$(CONFIG_AT1700) += at1700.o
+obj-$(CONFIG_ETH16I) += eth16i.o
+obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o
if NET_PCMCIA && PCMCIA
-config PCMCIA_FMVJ18X
- tristate "Fujitsu FMV-J18x PCMCIA support"
- select CRC32
- help
- Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
- PCMCIA (PC-card) Ethernet card to your computer.
-
- To compile this driver as a module, choose M here: the module will be
- called fmvj18x_cs. If unsure, say N.
-
config PCMCIA_XIRC2PS
tristate "Xircom 16-bit PCMCIA support"
help
#
# 16-bit client drivers
-obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o
obj-$(CONFIG_PCMCIA_XIRC2PS) += xirc2ps_cs.o
obj-$(CONFIG_ARCNET_COM20020_CS)+= com20020_cs.o
projects / mv-sheeva.git / commitdiff