ARM: at91/mmc: use gpio_is_valid to check the gpio

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index a8b4d2aa18e510817a6e83409558078639dd862d..f437c3e6f3aaa9b5cf5b96df2d5128c6029dfac1 100644 (file)
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -741,7 +741,7 @@ static void at91_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
        at91_mci_write(host, AT91_MCI_MR, (at91_mci_read(host, AT91_MCI_MR) & ~AT91_MCI_CLKDIV) | clkdiv);
 
        /* maybe switch power to the card */
-       if (host->board->vcc_pin) {
+       if (gpio_is_valid(host->board->vcc_pin)) {
                switch (ios->power_mode) {
                        case MMC_POWER_OFF:
                                gpio_set_value(host->board->vcc_pin, 0);
@@ -897,7 +897,7 @@ static int at91_mci_get_ro(struct mmc_host *mmc)
 {
        struct at91mci_host *host = mmc_priv(mmc);
 
-       if (host->board->wp_pin)
+       if (gpio_is_valid(host->board->wp_pin))
                return !!gpio_get_value(host->board->wp_pin);
        /*
         * Board doesn't support read only detection; let the mmc core
@@ -991,21 +991,21 @@ static int __init at91_mci_probe(struct platform_device *pdev)
         * Reserve GPIOs ... board init code makes sure these pins are set
         * up as GPIOs with the right direction (input, except for vcc)
         */
-       if (host->board->det_pin) {
+       if (gpio_is_valid(host->board->det_pin)) {
                ret = gpio_request(host->board->det_pin, "mmc_detect");
                if (ret < 0) {
                        dev_dbg(&pdev->dev, "couldn't claim card detect pin\n");
                        goto fail4b;
                }
        }
-       if (host->board->wp_pin) {
+       if (gpio_is_valid(host->board->wp_pin)) {
                ret = gpio_request(host->board->wp_pin, "mmc_wp");
                if (ret < 0) {
                        dev_dbg(&pdev->dev, "couldn't claim wp sense pin\n");
                        goto fail4;
                }
        }
-       if (host->board->vcc_pin) {
+       if (gpio_is_valid(host->board->vcc_pin)) {
                ret = gpio_request(host->board->vcc_pin, "mmc_vcc");
                if (ret < 0) {
                        dev_dbg(&pdev->dev, "couldn't claim vcc switch pin\n");
@@ -1057,7 +1057,7 @@ static int __init at91_mci_probe(struct platform_device *pdev)
        /*
         * Add host to MMC layer
         */
-       if (host->board->det_pin) {
+       if (gpio_is_valid(host->board->det_pin)) {
                host->present = !gpio_get_value(host->board->det_pin);
        }
        else
@@ -1068,7 +1068,7 @@ static int __init at91_mci_probe(struct platform_device *pdev)
        /*
         * monitor card insertion/removal if we can
         */
-       if (host->board->det_pin) {
+       if (gpio_is_valid(host->board->det_pin)) {
                ret = request_irq(gpio_to_irq(host->board->det_pin),
                                at91_mmc_det_irq, 0, mmc_hostname(mmc), host);
                if (ret)
@@ -1087,13 +1087,13 @@ fail0:
 fail1:
        clk_put(host->mci_clk);
 fail2:
-       if (host->board->vcc_pin)
+       if (gpio_is_valid(host->board->vcc_pin))
                gpio_free(host->board->vcc_pin);
 fail3:
-       if (host->board->wp_pin)
+       if (gpio_is_valid(host->board->wp_pin))
                gpio_free(host->board->wp_pin);
 fail4:
-       if (host->board->det_pin)
+       if (gpio_is_valid(host->board->det_pin))
                gpio_free(host->board->det_pin);
 fail4b:
        if (host->buffer)
@@ -1125,7 +1125,7 @@ static int __exit at91_mci_remove(struct platform_device *pdev)
                dma_free_coherent(&pdev->dev, MCI_BUFSIZE,
                                host->buffer, host->physical_address);
 
-       if (host->board->det_pin) {
+       if (gpio_is_valid(host->board->det_pin)) {
                if (device_can_wakeup(&pdev->dev))
                        free_irq(gpio_to_irq(host->board->det_pin), host);
                device_init_wakeup(&pdev->dev, 0);
@@ -1140,9 +1140,9 @@ static int __exit at91_mci_remove(struct platform_device *pdev)
        clk_disable(host->mci_clk);                     /* Disable the peripheral clock */
        clk_put(host->mci_clk);
 
-       if (host->board->vcc_pin)
+       if (gpio_is_valid(host->board->vcc_pin))
                gpio_free(host->board->vcc_pin);
-       if (host->board->wp_pin)
+       if (gpio_is_valid(host->board->wp_pin))
                gpio_free(host->board->wp_pin);
 
        iounmap(host->baseaddr);
@@ -1163,7 +1163,7 @@ static int at91_mci_suspend(struct platform_device *pdev, pm_message_t state)
        struct at91mci_host *host = mmc_priv(mmc);
        int ret = 0;
 
-       if (host->board->det_pin && device_may_wakeup(&pdev->dev))
+       if (gpio_is_valid(host->board->det_pin) && device_may_wakeup(&pdev->dev))
                enable_irq_wake(host->board->det_pin);
 
        if (mmc)
@@ -1178,7 +1178,7 @@ static int at91_mci_resume(struct platform_device *pdev)
        struct at91mci_host *host = mmc_priv(mmc);
        int ret = 0;
 
-       if (host->board->det_pin && device_may_wakeup(&pdev->dev))
+       if (gpio_is_valid(host->board->det_pin) && device_may_wakeup(&pdev->dev))
                disable_irq_wake(host->board->det_pin);
 
        if (mmc)